*
*/
+#include <linux/platform_device.h>
#include "tpm.h"
/* National definitions */
-#define TPM_NSC_BASE 0x360
-#define TPM_NSC_IRQ 0x07
+enum tpm_nsc_addr{
+ TPM_NSC_IRQ = 0x07,
+ TPM_NSC_BASE0_HI = 0x60,
+ TPM_NSC_BASE0_LO = 0x61,
+ TPM_NSC_BASE1_HI = 0x62,
+ TPM_NSC_BASE1_LO = 0x63
+};
-#define NSC_LDN_INDEX 0x07
-#define NSC_SID_INDEX 0x20
-#define NSC_LDC_INDEX 0x30
-#define NSC_DIO_INDEX 0x60
-#define NSC_CIO_INDEX 0x62
-#define NSC_IRQ_INDEX 0x70
-#define NSC_ITS_INDEX 0x71
+enum tpm_nsc_index {
+ NSC_LDN_INDEX = 0x07,
+ NSC_SID_INDEX = 0x20,
+ NSC_LDC_INDEX = 0x30,
+ NSC_DIO_INDEX = 0x60,
+ NSC_CIO_INDEX = 0x62,
+ NSC_IRQ_INDEX = 0x70,
+ NSC_ITS_INDEX = 0x71
+};
-#define NSC_STATUS 0x01
-#define NSC_COMMAND 0x01
-#define NSC_DATA 0x00
+enum tpm_nsc_status_loc {
+ NSC_STATUS = 0x01,
+ NSC_COMMAND = 0x01,
+ NSC_DATA = 0x00
+};
/* status bits */
-#define NSC_STATUS_OBF 0x01 /* output buffer full */
-#define NSC_STATUS_IBF 0x02 /* input buffer full */
-#define NSC_STATUS_F0 0x04 /* F0 */
-#define NSC_STATUS_A2 0x08 /* A2 */
-#define NSC_STATUS_RDY 0x10 /* ready to receive command */
-#define NSC_STATUS_IBR 0x20 /* ready to receive data */
+enum tpm_nsc_status {
+ NSC_STATUS_OBF = 0x01, /* output buffer full */
+ NSC_STATUS_IBF = 0x02, /* input buffer full */
+ NSC_STATUS_F0 = 0x04, /* F0 */
+ NSC_STATUS_A2 = 0x08, /* A2 */
+ NSC_STATUS_RDY = 0x10, /* ready to receive command */
+ NSC_STATUS_IBR = 0x20 /* ready to receive data */
+};
/* command bits */
-#define NSC_COMMAND_NORMAL 0x01 /* normal mode */
-#define NSC_COMMAND_EOC 0x03
-#define NSC_COMMAND_CANCEL 0x22
-
+enum tpm_nsc_cmd_mode {
+ NSC_COMMAND_NORMAL = 0x01, /* normal mode */
+ NSC_COMMAND_EOC = 0x03,
+ NSC_COMMAND_CANCEL = 0x22
+};
/*
* Wait for a certain status to appear
*/
static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
{
- int expired = 0;
- struct timer_list status_timer =
- TIMER_INITIALIZER(tpm_time_expired, jiffies + 10 * HZ,
- (unsigned long) &expired);
+ unsigned long stop;
/* status immediately available check */
- *data = inb(chip->vendor->base + NSC_STATUS);
+ *data = inb(chip->vendor.base + NSC_STATUS);
if ((*data & mask) == val)
return 0;
/* wait for status */
- add_timer(&status_timer);
+ stop = jiffies + 10 * HZ;
do {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(TPM_TIMEOUT);
- *data = inb(chip->vendor->base + 1);
- if ((*data & mask) == val) {
- del_singleshot_timer_sync(&status_timer);
+ msleep(TPM_TIMEOUT);
+ *data = inb(chip->vendor.base + 1);
+ if ((*data & mask) == val)
return 0;
- }
}
- while (!expired);
+ while (time_before(jiffies, stop));
return -EBUSY;
}
static int nsc_wait_for_ready(struct tpm_chip *chip)
{
int status;
- int expired = 0;
- struct timer_list status_timer =
- TIMER_INITIALIZER(tpm_time_expired, jiffies + 100,
- (unsigned long) &expired);
+ unsigned long stop;
/* status immediately available check */
- status = inb(chip->vendor->base + NSC_STATUS);
+ status = inb(chip->vendor.base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
- status = inb(chip->vendor->base + NSC_DATA);
+ status = inb(chip->vendor.base + NSC_DATA);
if (status & NSC_STATUS_RDY)
return 0;
/* wait for status */
- add_timer(&status_timer);
+ stop = jiffies + 100;
do {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(TPM_TIMEOUT);
- status = inb(chip->vendor->base + NSC_STATUS);
+ msleep(TPM_TIMEOUT);
+ status = inb(chip->vendor.base + NSC_STATUS);
if (status & NSC_STATUS_OBF)
- status = inb(chip->vendor->base + NSC_DATA);
- if (status & NSC_STATUS_RDY) {
- del_singleshot_timer_sync(&status_timer);
+ status = inb(chip->vendor.base + NSC_DATA);
+ if (status & NSC_STATUS_RDY)
return 0;
- }
}
- while (!expired);
+ while (time_before(jiffies, stop));
- dev_info(&chip->pci_dev->dev, "wait for ready failed\n");
+ dev_info(chip->dev, "wait for ready failed\n");
return -EBUSY;
}
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "F0 timeout\n");
+ dev_err(chip->dev, "F0 timeout\n");
return -EIO;
}
if ((data =
- inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
- dev_err(&chip->pci_dev->dev, "not in normal mode (0x%x)\n",
+ inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
+ dev_err(chip->dev, "not in normal mode (0x%x)\n",
data);
return -EIO;
}
for (p = buffer; p < &buffer[count]; p++) {
if (wait_for_stat
(chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"OBF timeout (while reading data)\n");
return -EIO;
}
if (data & NSC_STATUS_F0)
break;
- *p = inb(chip->vendor->base + NSC_DATA);
+ *p = inb(chip->vendor.base + NSC_DATA);
}
- if ((data & NSC_STATUS_F0) == 0) {
- dev_err(&chip->pci_dev->dev, "F0 not set\n");
+ if ((data & NSC_STATUS_F0) == 0 &&
+ (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) {
+ dev_err(chip->dev, "F0 not set\n");
return -EIO;
}
- if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) {
- dev_err(&chip->pci_dev->dev,
+ if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) {
+ dev_err(chip->dev,
"expected end of command(0x%x)\n", data);
return -EIO;
}
* fix it. Not sure why this is needed, we followed the flow
* chart in the manual to the letter.
*/
- outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+ outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
if (nsc_wait_for_ready(chip) != 0)
return -EIO;
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+ dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
- outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND);
+ outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND);
if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "IBR timeout\n");
+ dev_err(chip->dev, "IBR timeout\n");
return -EIO;
}
for (i = 0; i < count; i++) {
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
- dev_err(&chip->pci_dev->dev,
+ dev_err(chip->dev,
"IBF timeout (while writing data)\n");
return -EIO;
}
- outb(buf[i], chip->vendor->base + NSC_DATA);
+ outb(buf[i], chip->vendor.base + NSC_DATA);
}
if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
- dev_err(&chip->pci_dev->dev, "IBF timeout\n");
+ dev_err(chip->dev, "IBF timeout\n");
return -EIO;
}
- outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND);
+ outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND);
return count;
}
static void tpm_nsc_cancel(struct tpm_chip *chip)
{
- outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+ outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
+}
+
+static u8 tpm_nsc_status(struct tpm_chip *chip)
+{
+ return inb(chip->vendor.base + NSC_STATUS);
}
-static struct file_operations nsc_ops = {
+static const struct file_operations nsc_ops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.open = tpm_open,
.release = tpm_release,
};
-static struct tpm_vendor_specific tpm_nsc = {
+static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
+static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
+static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
+static DEVICE_ATTR(cancel, S_IWUSR|S_IWGRP, NULL, tpm_store_cancel);
+
+static struct attribute * nsc_attrs[] = {
+ &dev_attr_pubek.attr,
+ &dev_attr_pcrs.attr,
+ &dev_attr_caps.attr,
+ &dev_attr_cancel.attr,
+ NULL,
+};
+
+static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs };
+
+static const struct tpm_vendor_specific tpm_nsc = {
.recv = tpm_nsc_recv,
.send = tpm_nsc_send,
.cancel = tpm_nsc_cancel,
+ .status = tpm_nsc_status,
.req_complete_mask = NSC_STATUS_OBF,
.req_complete_val = NSC_STATUS_OBF,
- .base = TPM_NSC_BASE,
+ .req_canceled = NSC_STATUS_RDY,
+ .attr_group = &nsc_attr_grp,
.miscdev = { .fops = &nsc_ops, },
-
};
-static int __devinit tpm_nsc_init(struct pci_dev *pci_dev,
- const struct pci_device_id *pci_id)
+static struct platform_device *pdev = NULL;
+
+static void __devexit tpm_nsc_remove(struct device *dev)
+{
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ if ( chip ) {
+ release_region(chip->vendor.base, 2);
+ tpm_remove_hardware(chip->dev);
+ }
+}
+
+static struct device_driver nsc_drv = {
+ .name = "tpm_nsc",
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ .suspend = tpm_pm_suspend,
+ .resume = tpm_pm_resume,
+};
+
+static int __init init_nsc(void)
{
int rc = 0;
+ int lo, hi;
+ int nscAddrBase = TPM_ADDR;
+ struct tpm_chip *chip;
+ unsigned long base;
- if (pci_enable_device(pci_dev))
- return -EIO;
+ /* verify that it is a National part (SID) */
+ if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
+ nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)|
+ (tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE);
+ if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6)
+ return -ENODEV;
+ }
- if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
- rc = -ENODEV;
- goto out_err;
+ driver_register(&nsc_drv);
+
+ hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
+ lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
+ base = (hi<<8) | lo;
+
+ /* enable the DPM module */
+ tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
+
+ pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if (!pdev) {
+ rc = -ENOMEM;
+ goto err_unreg_drv;
}
- /* verify that it is a National part (SID) */
- if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
+ pdev->name = "tpm_nscl0";
+ pdev->id = -1;
+ pdev->num_resources = 0;
+ pdev->dev.release = tpm_nsc_remove;
+ pdev->dev.driver = &nsc_drv;
+
+ if ((rc = platform_device_register(pdev)) < 0)
+ goto err_free_dev;
+
+ if (request_region(base, 2, "tpm_nsc0") == NULL ) {
+ rc = -EBUSY;
+ goto err_unreg_dev;
+ }
+
+ if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) {
rc = -ENODEV;
- goto out_err;
+ goto err_rel_reg;
}
- dev_dbg(&pci_dev->dev, "NSC TPM detected\n");
- dev_dbg(&pci_dev->dev,
+ dev_dbg(&pdev->dev, "NSC TPM detected\n");
+ dev_dbg(&pdev->dev,
"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n",
- tpm_read_index(0x07), tpm_read_index(0x20),
- tpm_read_index(0x27));
- dev_dbg(&pci_dev->dev,
+ tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20),
+ tpm_read_index(nscAddrBase,0x27));
+ dev_dbg(&pdev->dev,
"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n",
- tpm_read_index(0x21), tpm_read_index(0x25),
- tpm_read_index(0x26), tpm_read_index(0x28));
- dev_dbg(&pci_dev->dev, "NSC IO Base0 0x%x\n",
- (tpm_read_index(0x60) << 8) | tpm_read_index(0x61));
- dev_dbg(&pci_dev->dev, "NSC IO Base1 0x%x\n",
- (tpm_read_index(0x62) << 8) | tpm_read_index(0x63));
- dev_dbg(&pci_dev->dev, "NSC Interrupt number and wakeup 0x%x\n",
- tpm_read_index(0x70));
- dev_dbg(&pci_dev->dev, "NSC IRQ type select 0x%x\n",
- tpm_read_index(0x71));
- dev_dbg(&pci_dev->dev,
+ tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25),
+ tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28));
+ dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n",
+ (tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61));
+ dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n",
+ (tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63));
+ dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n",
+ tpm_read_index(nscAddrBase,0x70));
+ dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n",
+ tpm_read_index(nscAddrBase,0x71));
+ dev_dbg(&pdev->dev,
"NSC DMA channel select0 0x%x, select1 0x%x\n",
- tpm_read_index(0x74), tpm_read_index(0x75));
- dev_dbg(&pci_dev->dev,
+ tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75));
+ dev_dbg(&pdev->dev,
"NSC Config "
"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
- tpm_read_index(0xF0), tpm_read_index(0xF1),
- tpm_read_index(0xF2), tpm_read_index(0xF3),
- tpm_read_index(0xF4), tpm_read_index(0xF5),
- tpm_read_index(0xF6), tpm_read_index(0xF7),
- tpm_read_index(0xF8), tpm_read_index(0xF9));
-
- dev_info(&pci_dev->dev,
- "NSC PC21100 TPM revision %d\n",
- tpm_read_index(0x27) & 0x1F);
-
- if (tpm_read_index(NSC_LDC_INDEX) == 0)
- dev_info(&pci_dev->dev, ": NSC TPM not active\n");
-
- /* select PM channel 1 */
- tpm_write_index(NSC_LDN_INDEX, 0x12);
- tpm_read_index(NSC_LDN_INDEX);
-
- /* disable the DPM module */
- tpm_write_index(NSC_LDC_INDEX, 0);
- tpm_read_index(NSC_LDC_INDEX);
-
- /* set the data register base addresses */
- tpm_write_index(NSC_DIO_INDEX, TPM_NSC_BASE >> 8);
- tpm_write_index(NSC_DIO_INDEX + 1, TPM_NSC_BASE);
- tpm_read_index(NSC_DIO_INDEX);
- tpm_read_index(NSC_DIO_INDEX + 1);
-
- /* set the command register base addresses */
- tpm_write_index(NSC_CIO_INDEX, (TPM_NSC_BASE + 1) >> 8);
- tpm_write_index(NSC_CIO_INDEX + 1, (TPM_NSC_BASE + 1));
- tpm_read_index(NSC_DIO_INDEX);
- tpm_read_index(NSC_DIO_INDEX + 1);
-
- /* set the interrupt number to be used for the host interface */
- tpm_write_index(NSC_IRQ_INDEX, TPM_NSC_IRQ);
- tpm_write_index(NSC_ITS_INDEX, 0x00);
- tpm_read_index(NSC_IRQ_INDEX);
+ tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1),
+ tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3),
+ tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5),
+ tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7),
+ tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9));
- /* enable the DPM module */
- tpm_write_index(NSC_LDC_INDEX, 0x01);
- tpm_read_index(NSC_LDC_INDEX);
+ dev_info(&pdev->dev,
+ "NSC TPM revision %d\n",
+ tpm_read_index(nscAddrBase, 0x27) & 0x1F);
- if ((rc = tpm_register_hardware(pci_dev, &tpm_nsc)) < 0)
- goto out_err;
+ chip->vendor.base = base;
return 0;
-out_err:
- pci_disable_device(pci_dev);
+err_rel_reg:
+ release_region(base, 2);
+err_unreg_dev:
+ platform_device_unregister(pdev);
+err_free_dev:
+ kfree(pdev);
+err_unreg_drv:
+ driver_unregister(&nsc_drv);
return rc;
}
-static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
- {PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
-
-static struct pci_driver nsc_pci_driver = {
- .name = "tpm_nsc",
- .id_table = tpm_pci_tbl,
- .probe = tpm_nsc_init,
- .remove = __devexit_p(tpm_remove),
- .suspend = tpm_pm_suspend,
- .resume = tpm_pm_resume,
-};
-
-static int __init init_nsc(void)
-{
- return pci_register_driver(&nsc_pci_driver);
-}
-
static void __exit cleanup_nsc(void)
{
- pci_unregister_driver(&nsc_pci_driver);
+ if (pdev) {
+ tpm_nsc_remove(&pdev->dev);
+ platform_device_unregister(pdev);
+ kfree(pdev);
+ pdev = NULL;
+ }
+
+ driver_unregister(&nsc_drv);
}
module_init(init_nsc);