-/* Code to support devices on the DIO and DIO-II bus
+/* Code to support devices on the DIO (and eventually DIO-II) bus
* Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
- * Copyright (C) 2004 Jochen Friedrich <jochen@scram.de>
*
* This code has basically these routines at the moment:
* int dio_find(u_int deviceid)
* This means that framebuffers should pass it as
* DIO_ENCODE_ID(DIO_ID_FBUFFER,DIO_ID2_TOPCAT)
* (or whatever); everybody else just uses DIO_ID_FOOBAR.
- * unsigned long dio_scodetophysaddr(int scode)
- * Return the physical address corresponding to the given select code.
+ * void *dio_scodetoviraddr(int scode)
+ * Return the virtual address corresponding to the given select code.
+ * NB: DIO-II devices will have to be mapped in in this routine!
* int dio_scodetoipl(int scode)
* Every DIO card has a fixed interrupt priority level. This function
* returns it, whatever it is.
* This file is based on the way the Amiga port handles Zorro II cards,
* although we aren't so complicated...
*/
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/types.h>
+#include <linux/config.h>
#include <linux/kernel.h>
-#include <linux/init.h>
+#include <linux/types.h>
#include <linux/dio.h>
#include <linux/slab.h> /* kmalloc() */
-#include <asm/uaccess.h>
-#include <asm/io.h> /* readb() */
-
-struct dio_bus dio_bus = {
- .resources = {
- /* DIO range */
- { .name = "DIO mem", .start = 0x00600000, .end = 0x007fffff },
- /* DIO-II range */
- { .name = "DIO-II mem", .start = 0x01000000, .end = 0x1fffffff }
- },
- .name = "DIO bus"
-};
-
+#include <linux/init.h>
+#include <asm/hwtest.h> /* hwreg_present() */
+#include <asm/io.h> /* readb() */
/* not a real config option yet! */
#define CONFIG_DIO_CONSTANTS
DIONAME(DCA0), DIONAME(DCA0REM), DIONAME(DCA1), DIONAME(DCA1REM),
DIONAME(DCM), DIONAME(DCMREM),
DIONAME(LAN),
- DIONAME(FHPIB), DIONAME(NHPIB),
+ DIONAME(FHPIB), DIONAME(NHPIB), DIONAME(IHPIB),
DIONAME(SCSI0), DIONAME(SCSI1), DIONAME(SCSI2), DIONAME(SCSI3),
DIONAME(FBUFFER),
DIONAME(PARALLEL), DIONAME(VME), DIONAME(DCL), DIONAME(DCLREM),
#define NUMNAMES (sizeof(names) / sizeof(struct dioname))
static const char *unknowndioname
- = "unknown DIO board -- please email <linux-m68k@lists.linux-m68k.org>!";
+ = "unknown DIO board -- please email <pmaydell@chiark.greenend.org.uk>!";
static const char *dio_getname(int id)
{
for (i = 0; i < NUMNAMES; i++)
if (names[i].id == id)
return names[i].name;
-
+
return unknowndioname;
}
#endif /* CONFIG_DIO_CONSTANTS */
-int __init dio_find(int deviceid)
+/* We represent all the DIO boards in the system with a linked list of these structs. */
+struct dioboard
+{
+ struct dioboard *next; /* link to next struct in list */
+ int ipl; /* IPL of this board */
+ int configured; /* has this board been configured? */
+ int scode; /* select code of this board */
+ int id; /* encoded ID */
+ const char *name;
+};
+
+static struct dioboard *blist = NULL;
+
+static int __init dio_find_slow(int deviceid)
{
- /* Called to find a DIO device before the full bus scan has run.
- * Only used by the console driver.
- */
- int scode, id;
- u_char prid, secid, i;
- mm_segment_t fs;
+ /* Called to find a DIO device before the full bus scan has run. Basically
+ * only used by the console driver.
+ * We don't do the primary+secondary ID encoding thing here. Maybe we should.
+ * (that would break the topcat detection, though. I need to think about
+ * the whole primary/secondary ID thing.)
+ */
+ int scode;
+ u_char prid;
- for (scode = 0; scode < DIO_SCMAX; scode++) {
+ for (scode = 0; scode < DIO_SCMAX; scode++)
+ {
void *va;
- unsigned long pa;
if (DIO_SCINHOLE(scode))
continue;
-
- pa = dio_scodetophysaddr(scode);
-
- if (!pa)
- continue;
-
- if (scode < DIOII_SCBASE)
- va = (void *)(pa + DIO_VIRADDRBASE);
- else
- va = ioremap(pa, PAGE_SIZE);
-
- fs = get_fs();
- set_fs(KERNEL_DS);
-
- if (get_user(i, (unsigned char *)va + DIO_IDOFF)) {
- set_fs(fs);
- if (scode >= DIOII_SCBASE)
- iounmap(va);
+
+ va = dio_scodetoviraddr(scode);
+ if (!va || !hwreg_present(va + DIO_IDOFF))
continue; /* no board present at that select code */
- }
- set_fs(fs);
- prid = DIO_ID(va);
+ /* We aren't very likely to want to use this to get at the IHPIB,
+ * but maybe it's returning the same ID as the card we do want...
+ */
+ if (!DIO_ISIHPIB(scode))
+ prid = DIO_ID(va);
+ else
+ prid = DIO_ID_IHPIB;
- if (DIO_NEEDSSECID(prid)) {
- secid = DIO_SECID(va);
- id = DIO_ENCODE_ID(prid, secid);
- } else
- id = prid;
-
- if (id == deviceid) {
- if (scode >= DIOII_SCBASE)
- iounmap(va);
+ if (prid == deviceid)
return scode;
- }
}
+ return 0;
+}
- return -1;
+/* Aargh: we use 0 for an error return code, but select code 0 exists!
+ * FIXME (trivial, use -1, but requires changes to all the drivers :-< )
+ */
+int dio_find(int deviceid)
+{
+ if (blist)
+ {
+ /* fast way */
+ struct dioboard *b;
+ for (b = blist; b; b = b->next)
+ if (b->id == deviceid && b->configured == 0)
+ return b->scode;
+ return 0;
+ }
+ return dio_find_slow(deviceid);
}
/* This is the function that scans the DIO space and works out what
*/
static int __init dio_init(void)
{
- int scode;
- mm_segment_t fs;
- int i;
- struct dio_dev *dev;
-
- if (!MACH_IS_HP300)
- return 0;
-
- printk(KERN_INFO "Scanning for DIO devices...\n");
-
- /* Initialize the DIO bus */
- INIT_LIST_HEAD(&dio_bus.devices);
- strcpy(dio_bus.dev.bus_id, "dio");
- device_register(&dio_bus.dev);
-
- /* Request all resources */
- dio_bus.num_resources = (hp300_model == HP_320 ? 1 : 2);
- for (i = 0; i < dio_bus.num_resources; i++)
- request_resource(&iomem_resource, &dio_bus.resources[i]);
-
- /* Register all devices */
+ int scode;
+ struct dioboard *b, *bprev = NULL;
+
+ printk("Scanning for DIO devices...\n");
+
for (scode = 0; scode < DIO_SCMAX; ++scode)
{
u_char prid, secid = 0; /* primary, secondary ID bytes */
u_char *va;
- unsigned long pa;
if (DIO_SCINHOLE(scode))
continue;
-
- pa = dio_scodetophysaddr(scode);
-
- if (!pa)
- continue;
-
- if (scode < DIOII_SCBASE)
- va = (void *)(pa + DIO_VIRADDRBASE);
- else
- va = ioremap(pa, PAGE_SIZE);
-
- fs = get_fs();
- set_fs(KERNEL_DS);
-
- if (get_user(i, (unsigned char *)va + DIO_IDOFF)) {
- set_fs(fs);
- if (scode >= DIOII_SCBASE)
- iounmap(va);
+
+ va = dio_scodetoviraddr(scode);
+ if (!va || !hwreg_present(va + DIO_IDOFF))
continue; /* no board present at that select code */
- }
-
- set_fs(fs);
/* Found a board, allocate it an entry in the list */
- dev = kmalloc(sizeof(struct dio_dev), GFP_KERNEL);
- if (!dev)
- return 0;
-
- memset(dev, 0, sizeof(struct dio_dev));
- dev->bus = &dio_bus;
- dev->dev.parent = &dio_bus.dev;
- dev->dev.bus = &dio_bus_type;
- dev->scode = scode;
- dev->resource.start = pa;
- dev->resource.end = pa + DIO_SIZE(scode, va);
- sprintf(dev->dev.bus_id,"%02x", scode);
-
- /* read the ID byte(s) and encode if necessary. */
- prid = DIO_ID(va);
-
- if (DIO_NEEDSSECID(prid)) {
- secid = DIO_SECID(va);
- dev->id = DIO_ENCODE_ID(prid, secid);
- } else
- dev->id = prid;
-
- dev->ipl = DIO_IPL(va);
- strcpy(dev->name,dio_getname(dev->id));
- printk(KERN_INFO "select code %3d: ipl %d: ID %02X", dev->scode, dev->ipl, prid);
+ b = kmalloc(sizeof(struct dioboard), GFP_KERNEL);
+
+ /* read the ID byte(s) and encode if necessary. Note workaround
+ * for broken internal HPIB devices...
+ */
+ if (!DIO_ISIHPIB(scode))
+ prid = DIO_ID(va);
+ else
+ prid = DIO_ID_IHPIB;
+
if (DIO_NEEDSSECID(prid))
+ {
+ secid = DIO_SECID(va);
+ b->id = DIO_ENCODE_ID(prid, secid);
+ }
+ else
+ b->id = prid;
+
+ b->configured = 0;
+ b->scode = scode;
+ b->ipl = DIO_IPL(va);
+ b->name = dio_getname(b->id);
+ printk("select code %3d: ipl %d: ID %02X", scode, b->ipl, prid);
+ if (DIO_NEEDSSECID(b->id))
printk(":%02X", secid);
- printk(": %s\n", dev->name);
+ printk(": %s\n", b->name);
+
+ b->next = NULL;
- if (scode >= DIOII_SCBASE)
- iounmap(va);
- device_register(&dev->dev);
- dio_create_sysfs_dev_files(dev);
+ if (bprev)
+ bprev->next = b;
+ else
+ blist = b;
+ bprev = b;
}
return 0;
}
subsys_initcall(dio_init);
/* Bear in mind that this is called in the very early stages of initialisation
- * in order to get the address of the serial port for the console...
+ * in order to get the virtual address of the serial port for the console...
*/
-unsigned long dio_scodetophysaddr(int scode)
+void *dio_scodetoviraddr(int scode)
{
- if (scode >= DIOII_SCBASE) {
- return (DIOII_BASE + (scode - 132) * DIOII_DEVSIZE);
- } else if (scode > DIO_SCMAX || scode < 0)
+ if (scode > DIOII_SCBASE)
+ {
+ printk("dio_scodetoviraddr: don't support DIO-II yet!\n");
+ return 0;
+ }
+ else if (scode > DIO_SCMAX || scode < 0)
return 0;
else if (DIO_SCINHOLE(scode))
return 0;
+ else if (DIO_ISIHPIB(scode))
+ return (void*)DIO_IHPIBADDR;
- return (DIO_BASE + scode * DIO_DEVSIZE);
+ return (void*)(DIO_VIRADDRBASE + DIO_BASE + scode * 0x10000);
+}
+
+int dio_scodetoipl(int scode)
+{
+ struct dioboard *b;
+ for (b = blist; b; b = b->next)
+ if (b->scode == scode)
+ break;
+
+ if (!b)
+ {
+ printk("dio_scodetoipl: bad select code %d\n", scode);
+ return 0;
+ }
+ else
+ return b->ipl;
+}
+
+const char *dio_scodetoname(int scode)
+{
+ struct dioboard *b;
+ for (b = blist; b; b = b->next)
+ if (b->scode == scode)
+ break;
+
+ if (!b)
+ {
+ printk("dio_scodetoname: bad select code %d\n", scode);
+ return NULL;
+ }
+ else
+ return b->name;
+}
+
+void dio_config_board(int scode)
+{
+ struct dioboard *b;
+ for (b = blist; b; b = b->next)
+ if (b->scode == scode)
+ break;
+
+ if (!b)
+ printk("dio_config_board: bad select code %d\n", scode);
+ else if (b->configured)
+ printk("dio_config_board: board at select code %d already configured\n", scode);
+ else
+ b->configured = 1;
+}
+
+void dio_unconfig_board(int scode)
+{
+ struct dioboard *b;
+ for (b = blist; b; b = b->next)
+ if (b->scode == scode)
+ break;
+
+ if (!b)
+ printk("dio_unconfig_board: bad select code %d\n", scode);
+ else if (!b->configured)
+ printk("dio_unconfig_board: board at select code %d not configured\n",
+ scode);
+ else
+ b->configured = 0;
}