--- /dev/null
+/*
+ it87.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring.
+
+ Supports: IT8705F Super I/O chip w/LPC interface
+ IT8712F Super I/O chip w/LPC interface & SMBus
+ Sis950 A clone of the IT8705F
+
+ Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com>
+ Largely inspired by lm78.c of the same package
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ djg@pdp8.net David Gesswein 7/18/01
+ Modified to fix bug with not all alarms enabled.
+ Added ability to read battery voltage and select temperature sensor
+ type at module load time.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <asm/io.h>
+
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
+static unsigned short isa_address;
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_2(it87, it8712);
+
+#define REG 0x2e /* The register to read/write */
+#define DEV 0x07 /* Register: Logical device select */
+#define VAL 0x2f /* The value to read/write */
+#define PME 0x04 /* The device with the fan registers in it */
+#define DEVID 0x20 /* Register: Device ID */
+#define DEVREV 0x22 /* Register: Device Revision */
+
+static inline int
+superio_inb(int reg)
+{
+ outb(reg, REG);
+ return inb(VAL);
+}
+
+static int superio_inw(int reg)
+{
+ int val;
+ outb(reg++, REG);
+ val = inb(VAL) << 8;
+ outb(reg, REG);
+ val |= inb(VAL);
+ return val;
+}
+
+static inline void
+superio_select(void)
+{
+ outb(DEV, REG);
+ outb(PME, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+ outb(0x87, REG);
+ outb(0x01, REG);
+ outb(0x55, REG);
+ outb(0x55, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+ outb(0x02, REG);
+ outb(0x02, VAL);
+}
+
+#define IT8712F_DEVID 0x8712
+#define IT8705F_DEVID 0x8705
+#define IT87_ACT_REG 0x30
+#define IT87_BASE_REG 0x60
+
+/* Update battery voltage after every reading if true */
+static int update_vbat;
+
+/* Not all BIOSes properly configure the PWM registers */
+static int fix_pwm_polarity;
+
+/* Chip Type */
+
+static u16 chip_type;
+
+/* Many IT87 constants specified below */
+
+/* Length of ISA address segment */
+#define IT87_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define IT87_ADDR_REG_OFFSET 5
+#define IT87_DATA_REG_OFFSET 6
+
+/*----- The IT87 registers -----*/
+
+#define IT87_REG_CONFIG 0x00
+
+#define IT87_REG_ALARM1 0x01
+#define IT87_REG_ALARM2 0x02
+#define IT87_REG_ALARM3 0x03
+
+#define IT87_REG_VID 0x0a
+#define IT87_REG_FAN_DIV 0x0b
+
+/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
+
+#define IT87_REG_FAN(nr) (0x0d + (nr))
+#define IT87_REG_FAN_MIN(nr) (0x10 + (nr))
+#define IT87_REG_FAN_MAIN_CTRL 0x13
+#define IT87_REG_FAN_CTL 0x14
+#define IT87_REG_PWM(nr) (0x15 + (nr))
+
+#define IT87_REG_VIN(nr) (0x20 + (nr))
+#define IT87_REG_TEMP(nr) (0x29 + (nr))
+
+#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2)
+#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2)
+#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
+#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
+
+#define IT87_REG_I2C_ADDR 0x48
+
+#define IT87_REG_VIN_ENABLE 0x50
+#define IT87_REG_TEMP_ENABLE 0x51
+
+#define IT87_REG_CHIPID 0x58
+
+#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255))
+#define IN_FROM_REG(val) ((val) * 16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 255;
+ rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+ return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
+ 254);
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
+ ((val)+500)/1000),-128,127))
+#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+
+#define PWM_TO_REG(val) ((val) >> 1)
+#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
+
+static int DIV_TO_REG(int val)
+{
+ int answer = 0;
+ while ((val >>= 1) != 0)
+ answer++;
+ return answer;
+}
+#define DIV_FROM_REG(val) (1 << (val))
+
+
+/* For each registered IT87, we need to keep some data in memory. That
+ data is pointed to by it87_list[NR]->data. The structure itself is
+ dynamically allocated, at the same time when a new it87 client is
+ allocated. */
+struct it87_data {
+ struct i2c_client client;
+ struct class_device *class_dev;
+ struct mutex lock;
+ enum chips type;
+
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ u8 in[9]; /* Register value */
+ u8 in_max[9]; /* Register value */
+ u8 in_min[9]; /* Register value */
+ u8 fan[3]; /* Register value */
+ u8 fan_min[3]; /* Register value */
+ u8 temp[3]; /* Register value */
+ u8 temp_high[3]; /* Register value */
+ u8 temp_low[3]; /* Register value */
+ u8 sensor; /* Register value */
+ u8 fan_div[3]; /* Register encoding, shifted right */
+ u8 vid; /* Register encoding, combined */
+ u8 vrm;
+ u32 alarms; /* Register encoding, combined */
+ u8 fan_main_ctrl; /* Register value */
+ u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
+};
+
+
+static int it87_attach_adapter(struct i2c_adapter *adapter);
+static int it87_isa_attach_adapter(struct i2c_adapter *adapter);
+static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int it87_detach_client(struct i2c_client *client);
+
+static int it87_read_value(struct i2c_client *client, u8 reg);
+static int it87_write_value(struct i2c_client *client, u8 reg, u8 value);
+static struct it87_data *it87_update_device(struct device *dev);
+static int it87_check_pwm(struct i2c_client *client);
+static void it87_init_client(struct i2c_client *client, struct it87_data *data);
+
+
+static struct i2c_driver it87_driver = {
+ .driver = {
+ .name = "it87",
+ },
+ .id = I2C_DRIVERID_IT87,
+ .attach_adapter = it87_attach_adapter,
+ .detach_client = it87_detach_client,
+};
+
+static struct i2c_driver it87_isa_driver = {
+ .driver = {
+ .name = "it87-isa",
+ },
+ .attach_adapter = it87_isa_attach_adapter,
+ .detach_client = it87_detach_client,
+};
+
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->in_min[nr] = IN_TO_REG(val);
+ it87_write_value(client, IT87_REG_VIN_MIN(nr),
+ data->in_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->in_max[nr] = IN_TO_REG(val);
+ it87_write_value(client, IT87_REG_VIN_MAX(nr),
+ data->in_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define show_in_offset(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset);
+
+#define limit_in_offset(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset);
+
+show_in_offset(0);
+limit_in_offset(0);
+show_in_offset(1);
+limit_in_offset(1);
+show_in_offset(2);
+limit_in_offset(2);
+show_in_offset(3);
+limit_in_offset(3);
+show_in_offset(4);
+limit_in_offset(4);
+show_in_offset(5);
+limit_in_offset(5);
+show_in_offset(6);
+limit_in_offset(6);
+show_in_offset(7);
+limit_in_offset(7);
+show_in_offset(8);
+
+/* 3 temperatures */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
+}
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr]));
+}
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp_high[nr] = TEMP_TO_REG(val);
+ it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp_low[nr] = TEMP_TO_REG(val);
+ it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+#define show_temp_offset(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, set_temp_max, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+ show_temp_min, set_temp_min, offset - 1);
+
+show_temp_offset(1);
+show_temp_offset(2);
+show_temp_offset(3);
+
+static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ u8 reg = data->sensor; /* In case the value is updated while we use it */
+
+ if (reg & (1 << nr))
+ return sprintf(buf, "3\n"); /* thermal diode */
+ if (reg & (8 << nr))
+ return sprintf(buf, "2\n"); /* thermistor */
+ return sprintf(buf, "0\n"); /* disabled */
+}
+static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+
+ data->sensor &= ~(1 << nr);
+ data->sensor &= ~(8 << nr);
+ /* 3 = thermal diode; 2 = thermistor; 0 = disabled */
+ if (val == 3)
+ data->sensor |= 1 << nr;
+ else if (val == 2)
+ data->sensor |= 8 << nr;
+ else if (val != 0) {
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ }
+ it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+#define show_sensor_offset(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
+ show_sensor, set_sensor, offset - 1);
+
+show_sensor_offset(1);
+show_sensor_offset(2);
+show_sensor_offset(3);
+
+/* 3 Fans */
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n",
+ FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0);
+}
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]);
+}
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+ u8 reg = it87_read_value(client, IT87_REG_FAN_DIV);
+
+ mutex_lock(&data->update_lock);
+ switch (nr) {
+ case 0: data->fan_div[nr] = reg & 0x07; break;
+ case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
+ case 2: data->fan_div[nr] = (reg & 0x40) ? 3 : 1; break;
+ }
+
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+ int i, min[3];
+ u8 old;
+
+ mutex_lock(&data->update_lock);
+ old = it87_read_value(client, IT87_REG_FAN_DIV);
+
+ for (i = 0; i < 3; i++)
+ min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i]));
+
+ switch (nr) {
+ case 0:
+ case 1:
+ data->fan_div[nr] = DIV_TO_REG(val);
+ break;
+ case 2:
+ if (val < 8)
+ data->fan_div[nr] = 1;
+ else
+ data->fan_div[nr] = 3;
+ }
+ val = old & 0x80;
+ val |= (data->fan_div[0] & 0x07);
+ val |= (data->fan_div[1] & 0x07) << 3;
+ if (data->fan_div[2] == 3)
+ val |= 0x1 << 6;
+ it87_write_value(client, IT87_REG_FAN_DIV, val);
+
+ for (i = 0; i < 3; i++) {
+ data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i]));
+ it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_pwm_enable(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+
+ if (val == 0) {
+ int tmp;
+ /* make sure the fan is on when in on/off mode */
+ tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+ it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr));
+ /* set on/off mode */
+ data->fan_main_ctrl &= ~(1 << nr);
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ } else if (val == 1) {
+ /* set SmartGuardian mode */
+ data->fan_main_ctrl |= (1 << nr);
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ /* set saved pwm value, clear FAN_CTLX PWM mode bit */
+ it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ } else {
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->manual_pwm_ctl[nr] = val;
+ if (data->fan_main_ctrl & (1 << nr))
+ it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define show_fan_offset(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1);
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+
+#define show_pwm_offset(offset) \
+static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ show_pwm_enable, set_pwm_enable, offset - 1); \
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_pwm, set_pwm, offset - 1);
+
+show_pwm_offset(1);
+show_pwm_offset(2);
+show_pwm_offset(3);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t
+show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%u\n", data->vrm);
+}
+static ssize_t
+store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->vrm = val;
+
+ return count;
+}
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm)
+
+static ssize_t
+show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid)
+
+/* This function is called when:
+ * it87_driver is inserted (when this module is loaded), for each
+ available adapter
+ * when a new adapter is inserted (and it87_driver is still present) */
+static int it87_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, it87_detect);
+}
+
+static int it87_isa_attach_adapter(struct i2c_adapter *adapter)
+{
+ return it87_detect(adapter, isa_address, -1);
+}
+
+/* SuperIO detection - will change isa_address if a chip is found */
+static int __init it87_find(unsigned short *address)
+{
+ int err = -ENODEV;
+
+ superio_enter();
+ chip_type = superio_inw(DEVID);
+ if (chip_type != IT8712F_DEVID
+ && chip_type != IT8705F_DEVID)
+ goto exit;
+
+ superio_select();
+ if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
+ pr_info("it87: Device not activated, skipping\n");
+ goto exit;
+ }
+
+ *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
+ if (*address == 0) {
+ pr_info("it87: Base address not set, skipping\n");
+ goto exit;
+ }
+
+ err = 0;
+ pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+ chip_type, *address, superio_inb(DEVREV) & 0x0f);
+
+exit:
+ superio_exit();
+ return err;
+}
+
+/* This function is called by i2c_probe */
+static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ int i;
+ struct i2c_client *new_client;
+ struct it87_data *data;
+ int err = 0;
+ const char *name = "";
+ int is_isa = i2c_is_isa_adapter(adapter);
+ int enable_pwm_interface;
+
+ if (!is_isa &&
+ !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ goto ERROR0;
+
+ /* Reserve the ISA region */
+ if (is_isa)
+ if (!request_region(address, IT87_EXTENT,
+ it87_isa_driver.driver.name))
+ goto ERROR0;
+
+ /* For now, we presume we have a valid client. We create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access it87_{read,write}_value. */
+
+ if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto ERROR1;
+ }
+
+ new_client = &data->client;
+ if (is_isa)
+ mutex_init(&data->lock);
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = is_isa ? &it87_isa_driver : &it87_driver;
+ new_client->flags = 0;
+
+ /* Now, we do the remaining detection. */
+
+ if (kind < 0) {
+ if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
+ || (!is_isa
+ && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) {
+ err = -ENODEV;
+ goto ERROR2;
+ }
+ }
+
+ /* Determine the chip type. */
+ if (kind <= 0) {
+ i = it87_read_value(new_client, IT87_REG_CHIPID);
+ if (i == 0x90) {
+ kind = it87;
+ if ((is_isa) && (chip_type == IT8712F_DEVID))
+ kind = it8712;
+ }
+ else {
+ if (kind == 0)
+ dev_info(&adapter->dev,
+ "Ignoring 'force' parameter for unknown chip at "
+ "adapter %d, address 0x%02x\n",
+ i2c_adapter_id(adapter), address);
+ err = -ENODEV;
+ goto ERROR2;
+ }
+ }
+
+ if (kind == it87) {
+ name = "it87";
+ } else if (kind == it8712) {
+ name = "it8712";
+ }
+
+ /* Fill in the remaining client fields and put it into the global list */
+ strlcpy(new_client->name, name, I2C_NAME_SIZE);
+ data->type = kind;
+ data->valid = 0;
+ mutex_init(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto ERROR2;
+
+ if (!is_isa)
+ dev_info(&new_client->dev, "The I2C interface to IT87xxF "
+ "hardware monitoring chips is deprecated. Please "
+ "report if you still rely on it.\n");
+
+ /* Check PWM configuration */
+ enable_pwm_interface = it87_check_pwm(new_client);
+
+ /* Initialize the IT87 chip */
+ it87_init_client(new_client, data);
+
+ /* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&new_client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto ERROR3;
+ }
+
+ device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr);
+ device_create_file(&new_client->dev, &dev_attr_alarms);
+ if (enable_pwm_interface) {
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm2_enable.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm3_enable.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr);
+ device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr);
+ }
+
+ if (data->type == it8712) {
+ data->vrm = vid_which_vrm();
+ device_create_file_vrm(new_client);
+ device_create_file_vid(new_client);
+ }
+
+ return 0;
+
+ERROR3:
+ i2c_detach_client(new_client);
+ERROR2:
+ kfree(data);
+ERROR1:
+ if (is_isa)
+ release_region(address, IT87_EXTENT);
+ERROR0:
+ return err;
+}
+
+static int it87_detach_client(struct i2c_client *client)
+{
+ struct it87_data *data = i2c_get_clientdata(client);
+ int err;
+
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ if(i2c_is_isa_client(client))
+ release_region(client->addr, IT87_EXTENT);
+ kfree(data);
+
+ return 0;
+}
+
+/* The SMBus locks itself, but ISA access must be locked explicitly!
+ We don't want to lock the whole ISA bus, so we lock each client
+ separately.
+ We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ would slow down the IT87 access and should not be necessary. */
+static int it87_read_value(struct i2c_client *client, u8 reg)
+{
+ struct it87_data *data = i2c_get_clientdata(client);
+
+ int res;
+ if (i2c_is_isa_client(client)) {
+ mutex_lock(&data->lock);
+ outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+ res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
+ mutex_unlock(&data->lock);
+ return res;
+ } else
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* The SMBus locks itself, but ISA access muse be locked explicitly!
+ We don't want to lock the whole ISA bus, so we lock each client
+ separately.
+ We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ would slow down the IT87 access and should not be necessary. */
+static int it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+ struct it87_data *data = i2c_get_clientdata(client);
+
+ if (i2c_is_isa_client(client)) {
+ mutex_lock(&data->lock);
+ outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+ outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+ mutex_unlock(&data->lock);
+ return 0;
+ } else
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* Return 1 if and only if the PWM interface is safe to use */
+static int it87_check_pwm(struct i2c_client *client)
+{
+ /* Some BIOSes fail to correctly configure the IT87 fans. All fans off
+ * and polarity set to active low is sign that this is the case so we
+ * disable pwm control to protect the user. */
+ int tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+ if ((tmp & 0x87) == 0) {
+ if (fix_pwm_polarity) {
+ /* The user asks us to attempt a chip reconfiguration.
+ * This means switching to active high polarity and
+ * inverting all fan speed values. */
+ int i;
+ u8 pwm[3];
+
+ for (i = 0; i < 3; i++)
+ pwm[i] = it87_read_value(client,
+ IT87_REG_PWM(i));
+
+ /* If any fan is in automatic pwm mode, the polarity
+ * might be correct, as suspicious as it seems, so we
+ * better don't change anything (but still disable the
+ * PWM interface). */
+ if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
+ dev_info(&client->dev, "Reconfiguring PWM to "
+ "active high polarity\n");
+ it87_write_value(client, IT87_REG_FAN_CTL,
+ tmp | 0x87);
+ for (i = 0; i < 3; i++)
+ it87_write_value(client,
+ IT87_REG_PWM(i),
+ 0x7f & ~pwm[i]);
+ return 1;
+ }
+
+ dev_info(&client->dev, "PWM configuration is "
+ "too broken to be fixed\n");
+ }
+
+ dev_info(&client->dev, "Detected broken BIOS "
+ "defaults, disabling PWM interface\n");
+ return 0;
+ } else if (fix_pwm_polarity) {
+ dev_info(&client->dev, "PWM configuration looks "
+ "sane, won't touch\n");
+ }
+
+ return 1;
+}
+
+/* Called when we have found a new IT87. */
+static void it87_init_client(struct i2c_client *client, struct it87_data *data)
+{
+ int tmp, i;
+
+ /* initialize to sane defaults:
+ * - if the chip is in manual pwm mode, this will be overwritten with
+ * the actual settings on the chip (so in this case, initialization
+ * is not needed)
+ * - if in automatic or on/off mode, we could switch to manual mode,
+ * read the registers and set manual_pwm_ctl accordingly, but currently
+ * this is not implemented, so we initialize to something sane */
+ for (i = 0; i < 3; i++) {
+ data->manual_pwm_ctl[i] = 0xff;
+ }
+
+ /* Check if temperature channnels are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+ if ((tmp & 0x3f) == 0) {
+ /* Temp1,Temp3=thermistor; Temp2=thermal diode */
+ tmp = (tmp & 0xc0) | 0x2a;
+ it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+ }
+ data->sensor = tmp;
+
+ /* Check if voltage monitors are reset manually or by some reason */
+ tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+ if ((tmp & 0xff) == 0) {
+ /* Enable all voltage monitors */
+ it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+ }
+
+ /* Check if tachometers are reset manually or by some reason */
+ data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+ if ((data->fan_main_ctrl & 0x70) == 0) {
+ /* Enable all fan tachometers */
+ data->fan_main_ctrl |= 0x70;
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ }
+
+ /* Set current fan mode registers and the default settings for the
+ * other mode registers */
+ for (i = 0; i < 3; i++) {
+ if (data->fan_main_ctrl & (1 << i)) {
+ /* pwm mode */
+ tmp = it87_read_value(client, IT87_REG_PWM(i));
+ if (tmp & 0x80) {
+ /* automatic pwm - not yet implemented, but
+ * leave the settings made by the BIOS alone
+ * until a change is requested via the sysfs
+ * interface */
+ } else {
+ /* manual pwm */
+ data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp);
+ }
+ }
+ }
+
+ /* Start monitoring */
+ it87_write_value(client, IT87_REG_CONFIG,
+ (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
+ | (update_vbat ? 0x41 : 0x01));
+}
+
+static struct it87_data *it87_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+
+ if (update_vbat) {
+ /* Cleared after each update, so reenable. Value
+ returned by this read will be previous value */
+ it87_write_value(client, IT87_REG_CONFIG,
+ it87_read_value(client, IT87_REG_CONFIG) | 0x40);
+ }
+ for (i = 0; i <= 7; i++) {
+ data->in[i] =
+ it87_read_value(client, IT87_REG_VIN(i));
+ data->in_min[i] =
+ it87_read_value(client, IT87_REG_VIN_MIN(i));
+ data->in_max[i] =
+ it87_read_value(client, IT87_REG_VIN_MAX(i));
+ }
+ data->in[8] =
+ it87_read_value(client, IT87_REG_VIN(8));
+ /* Temperature sensor doesn't have limit registers, set
+ to min and max value */
+ data->in_min[8] = 0;
+ data->in_max[8] = 255;
+
+ for (i = 0; i < 3; i++) {
+ data->fan[i] =
+ it87_read_value(client, IT87_REG_FAN(i));
+ data->fan_min[i] =
+ it87_read_value(client, IT87_REG_FAN_MIN(i));
+ }
+ for (i = 0; i < 3; i++) {
+ data->temp[i] =
+ it87_read_value(client, IT87_REG_TEMP(i));
+ data->temp_high[i] =
+ it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+ data->temp_low[i] =
+ it87_read_value(client, IT87_REG_TEMP_LOW(i));
+ }
+
+ i = it87_read_value(client, IT87_REG_FAN_DIV);
+ data->fan_div[0] = i & 0x07;
+ data->fan_div[1] = (i >> 3) & 0x07;
+ data->fan_div[2] = (i & 0x40) ? 3 : 1;
+
+ data->alarms =
+ it87_read_value(client, IT87_REG_ALARM1) |
+ (it87_read_value(client, IT87_REG_ALARM2) << 8) |
+ (it87_read_value(client, IT87_REG_ALARM3) << 16);
+ data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+
+ data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+ /* The 8705 does not have VID capability */
+ if (data->type == it8712) {
+ data->vid = it87_read_value(client, IT87_REG_VID);
+ data->vid &= 0x1f;
+ }
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int __init sm_it87_init(void)
+{
+ int res;
+
+ res = i2c_add_driver(&it87_driver);
+ if (res)
+ return res;
+
+ if (!it87_find(&isa_address)) {
+ res = i2c_isa_add_driver(&it87_isa_driver);
+ if (res) {
+ i2c_del_driver(&it87_driver);
+ return res;
+ }
+ }
+
+ return 0;
+}
+
+static void __exit sm_it87_exit(void)
+{
+ if (isa_address)
+ i2c_isa_del_driver(&it87_isa_driver);
+ i2c_del_driver(&it87_driver);
+}
+
+
+MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>");
+MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
+module_param(update_vbat, bool, 0);
+MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
+module_param(fix_pwm_polarity, bool, 0);
+MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)");
+MODULE_LICENSE("GPL");
+
+module_init(sm_it87_init);
+module_exit(sm_it87_exit);
git://git.onelab.eu / linux-2.6.git / blobdiff