* Since the datasheet omits to give the chip stepping code, I give it
* here: 0x03 (at register 0xff).
*
- * Also supports the LM82 temp sensor, which is basically a stripped down
- * model of the LM83. Datasheet is here:
- * http://www.national.com/pf/LM/LM82.html
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_2(lm83, lm82);
+I2C_CLIENT_INSMOD_1(lm83);
/*
* The LM83 registers
if (man_id == 0x01) { /* National Semiconductor */
if (chip_id == 0x03) {
kind = lm83;
- } else
- if (chip_id == 0x01) {
- kind = lm82;
}
}
if (kind == lm83) {
name = "lm83";
- } else
- if (kind == lm82) {
- name = "lm82";
}
/* We can fill in the remaining client fields */
goto exit_detach;
}
- /*
- * The LM82 can only monitor one external diode which is
- * at the same register as the LM83 temp3 entry - so we
- * declare 1 and 3 common, and then 2 and 4 only for the LM83.
- */
-
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_input.dev_attr);
device_create_file(&new_client->dev,
&sensor_dev_attr_temp3_input.dev_attr);
-
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp4_input.dev_attr);
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_max.dev_attr);
device_create_file(&new_client->dev,
&sensor_dev_attr_temp3_max.dev_attr);
-
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp4_max.dev_attr);
device_create_file(&new_client->dev,
&sensor_dev_attr_temp1_crit.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_crit.dev_attr);
device_create_file(&new_client->dev,
&sensor_dev_attr_temp3_crit.dev_attr);
-
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp4_crit.dev_attr);
device_create_file(&new_client->dev, &dev_attr_alarms);
- if (kind == lm83) {
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_input.dev_attr);
-
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_max.dev_attr);
-
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_crit.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_temp4_crit.dev_attr);
- }
-
return 0;
exit_detach: