config I2C_ALI1535
tristate "ALI 1535"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
config I2C_ALI15X3
tristate "ALI 15x3"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
config I2C_AMD756
tristate "AMD 756/766/768/8111 and nVidia nForce"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the AMD
756/766/768 mainboard I2C interfaces. The driver also includes
config I2C_AMD8111
tristate "AMD 8111"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
will be called i2c-hydra.
config I2C_I801
- tristate "Intel 801"
- depends on I2C && PCI && EXPERIMENTAL
+ tristate "Intel 82801 (ICH)"
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
82801BA
82801CA/CAM
82801DB
- 82801EB
+ 82801EB/ER (ICH5/ICH5R)
6300ESB
ICH6
ICH7
+ ESB2
+ ICH8
This driver can also be built as a module. If so, the module
will be called i2c-i801.
config I2C_I810
tristate "Intel 810/815"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the Intel
810/815 family of mainboard I2C interfaces. Specifically, the
- following versions of the chipset is supported:
+ following versions of the chipset are supported:
i810AA
i810AB
i810E
i815
+ i845G
This driver can also be built as a module. If so, the module
will be called i2c-i810.
+config I2C_PXA
+ tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
+ depends on I2C && EXPERIMENTAL && ARCH_PXA
+ help
+ If you have devices in the PXA I2C bus, say yes to this option.
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pxa.
+
+config I2C_PXA_SLAVE
+ bool "Intel PXA2XX I2C Slave comms support"
+ depends on I2C_PXA
+ help
+ Support I2C slave mode communications on the PXA I2C bus. This
+ is necessary for systems where the PXA may be a target on the
+ I2C bus.
+
+config I2C_PIIX4
+ tristate "Intel PIIX4"
+ depends on I2C && PCI
+ help
+ If you say yes to this option, support will be included for the Intel
+ PIIX4 family of mainboard I2C interfaces. Specifically, the following
+ versions of the chipset are supported (note that Serverworks is part
+ of Broadcom):
+ Intel PIIX4
+ Intel 440MX
+ Serverworks OSB4
+ Serverworks CSB5
+ Serverworks CSB6
+ Serverworks HT-1000
+ SMSC Victory66
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-piix4.
+
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
depends on IBM_OCP && I2C
will be called i2c-iop3xx.
config I2C_ISA
- tristate "ISA Bus support"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes to this option, support will be included for i2c
- interfaces that are on the ISA bus.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-isa.
+ tristate
+ depends on I2C
config I2C_ITE
tristate "ITE I2C Adapter"
This support is also available as a module. If so, the module
will be called i2c-ixp2000.
-config I2C_KEYWEST
- tristate "Powermac Keywest I2C interface"
+config I2C_POWERMAC
+ tristate "Powermac I2C interface"
depends on I2C && PPC_PMAC
+ default y
help
- This supports the use of the I2C interface in the combo-I/O
- chip on recent Apple machines. Say Y if you have such a machine.
+ This exposes the various PowerMac i2c interfaces to the linux i2c
+ layer and to userland. It is used by various drivers on the powemac
+ platform, thus should generally be enabled.
- This support is also available as a module. If so, the module
- will be called i2c-keywest.
+ This support is also available as a module. If so, the module
+ will be called i2c-powermac.
config I2C_MPC
tristate "MPC107/824x/85xx/52xx"
- depends on I2C && PPC
+ depends on I2C && PPC32
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
will be called i2c-mpc.
config I2C_NFORCE2
- tristate "Nvidia Nforce2"
- depends on I2C && PCI && EXPERIMENTAL
+ tristate "Nvidia nForce2, nForce3 and nForce4"
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the Nvidia
- Nforce2 family of mainboard I2C interfaces.
- This driver also supports the nForce3 Pro 150 MCP.
+ nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
This driver can also be built as a module. If so, the module
will be called i2c-nforce2.
This driver is a replacement for (and was inspired by) an older
driver named i2c-philips-par. The new driver supports more devices,
and makes it easier to add support for new devices.
-
+
+ An adapter type parameter is now mandatory. Please read the file
+ Documentation/i2c/busses/i2c-parport for details.
+
Another driver exists, named i2c-parport-light, which doesn't depend
on the parport driver. This is meant for embedded systems. Don't say
Y here if you intend to say Y or M there.
This support is also available as a module. If so, the module
will be called i2c-parport-light.
-config I2C_PIIX4
- tristate "Intel PIIX4"
- depends on I2C && PCI && EXPERIMENTAL && !64BIT
- help
- If you say yes to this option, support will be included for the Intel
- PIIX4 family of mainboard I2C interfaces. Specifically, the following
- versions of the chipset are supported:
- Intel PIIX4
- Intel 440MX
- Serverworks OSB4
- Serverworks CSB5
- Serverworks CSB6
- SMSC Victory66
-
- This driver can also be built as a module. If so, the module
- will be called i2c-piix4.
-
config I2C_PROSAVAGE
tristate "S3/VIA (Pro)Savage"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
also be specified with a module parameter.
config SCx200_ACB
- tristate "NatSemi SCx200 ACCESS.bus"
- depends on I2C && PCI
+ tristate "Geode ACCESS.bus support"
+ depends on X86_32 && I2C && PCI
help
- Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+ Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
+ SC1100 processors and the CS5535 and CS5536 Geode companion devices.
If you don't know what to do here, say N.
config I2C_SIS5595
tristate "SiS 5595"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
config I2C_SIS630
tristate "SiS 630/730"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the
SiS630 and SiS730 SMBus (a subset of I2C) interface.
config I2C_SIS96X
tristate "SiS 96x"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the SiS
96x SMBus (a subset of I2C) interfaces. Specifically, the following
648/961
650/961
735
+ 745
This driver can also be built as a module. If so, the module
will be called i2c-sis96x.
config I2C_VIAPRO
tristate "VIA 82C596/82C686/823x"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
help
If you say yes to this option, support will be included for the VIA
82C596/82C686/823x I2C interfaces. Specifically, the following
config I2C_VOODOO3
tristate "Voodoo 3"
- depends on I2C && PCI && EXPERIMENTAL
+ depends on I2C && PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
This driver can also be built as a module. If so, the module
will be called i2c-pca-isa.
+config I2C_MV64XXX
+ tristate "Marvell mv64xxx I2C Controller"
+ depends on I2C && MV64X60 && EXPERIMENTAL
+ help
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the Marvell 64xxx line of host bridges.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mv64xxx.
+
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff