it87.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring.
- Supports: IT8705F Super I/O chip w/LPC interface
- IT8712F Super I/O chip w/LPC interface & SMbus
+ Supports: IT8705F Super I/O chip w/LPC interface & SMBus
+ IT8712F Super I/O chip w/LPC interface & SMBus
Sis950 A clone of the IT8705F
Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24,
- 0x25, 0x26, 0x27, 0x28, 0x29,
- 0x2a, 0x2b, 0x2c, 0x2d, 0x2e,
- 0x2f, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+ 0x2e, 0x2f, I2C_CLIENT_END };
static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
/* Insmod parameters */
#define VAL 0x2f /* The value to read/write */
#define PME 0x04 /* The device with the fan registers in it */
#define DEVID 0x20 /* Register: Device ID */
+#define DEVREV 0x22 /* Register: Device Revision */
static inline int
superio_inb(int reg)
return inb(VAL);
}
+static int superio_inw(int reg)
+{
+ int val;
+ outb(reg++, REG);
+ val = inb(VAL) << 8;
+ outb(reg, REG);
+ val |= inb(VAL);
+ return val;
+}
+
static inline void
superio_select(void)
{
outb(0x02, VAL);
}
-/* just IT8712F for now - this should be extended to support the other
- chips as well */
#define IT8712F_DEVID 0x8712
+#define IT8705F_DEVID 0x8705
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
/* Update battery voltage after every reading if true */
static int update_vbat;
-/* Reset the registers on init if true */
-static int reset;
+/* Not all BIOSes properly configure the PWM registers */
+static int fix_pwm_polarity;
/* Chip Type */
#define IT87_REG_FAN(nr) (0x0d + (nr))
#define IT87_REG_FAN_MIN(nr) (0x10 + (nr))
#define IT87_REG_FAN_MAIN_CTRL 0x13
+#define IT87_REG_FAN_CTL 0x14
+#define IT87_REG_PWM(nr) (0x15 + (nr))
#define IT87_REG_VIN(nr) (0x20 + (nr))
#define IT87_REG_TEMP(nr) (0x29 + (nr))
#define ALARMS_FROM_REG(val) (val)
+#define PWM_TO_REG(val) ((val) >> 1)
+#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
+
static int DIV_TO_REG(int val)
{
int answer = 0;
u8 vid; /* Register encoding, combined */
int vrm;
u32 alarms; /* Register encoding, combined */
+ u8 fan_main_ctrl; /* Register value */
+ u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
};
static int it87_write_value(struct i2c_client *client, u8 register,
u8 value);
static struct it87_data *it87_update_device(struct device *dev);
+static int it87_check_pwm(struct i2c_client *client);
static void it87_init_client(struct i2c_client *client, struct it87_data *data);
.detach_client = it87_detach_client,
};
-static int it87_id;
-
static ssize_t show_in(struct device *dev, char *buf, int nr)
{
struct it87_data *data = it87_update_device(dev);
struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
it87_write_value(client, IT87_REG_VIN_MIN(nr),
data->in_min[nr]);
+ up(&data->update_lock);
return count;
}
static ssize_t set_in_max(struct device *dev, const char *buf,
struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
it87_write_value(client, IT87_REG_VIN_MAX(nr),
data->in_max[nr]);
+ up(&data->update_lock);
return count;
}
struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
data->temp_high[nr] = TEMP_TO_REG(val);
it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ up(&data->update_lock);
return count;
}
static ssize_t set_temp_min(struct device *dev, const char *buf,
struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
data->temp_low[nr] = TEMP_TO_REG(val);
it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+ up(&data->update_lock);
return count;
}
#define show_temp_offset(offset) \
static ssize_t show_sensor(struct device *dev, char *buf, int nr)
{
struct it87_data *data = it87_update_device(dev);
- if (data->sensor & (1 << nr))
+ u8 reg = data->sensor; /* In case the value is updated while we use it */
+
+ if (reg & (1 << nr))
return sprintf(buf, "3\n"); /* thermal diode */
- if (data->sensor & (8 << nr))
+ if (reg & (8 << nr))
return sprintf(buf, "2\n"); /* thermistor */
return sprintf(buf, "0\n"); /* disabled */
}
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
+ down(&data->update_lock);
+
data->sensor &= ~(1 << nr);
data->sensor &= ~(8 << nr);
/* 3 = thermal diode; 2 = thermistor; 0 = disabled */
data->sensor |= 1 << nr;
else if (val == 2)
data->sensor |= 8 << nr;
- else if (val != 0)
+ else if (val != 0) {
+ up(&data->update_lock);
return -EINVAL;
+ }
it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+ up(&data->update_lock);
return count;
}
#define show_sensor_offset(offset) \
{
struct it87_data *data = it87_update_device(dev);
return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
- DIV_FROM_REG(data->fan_div[nr])) );
+ DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
{
struct it87_data *data = it87_update_device(dev);
return sprintf(buf,"%d\n",
- FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
+ FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
{
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf,"%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0);
+}
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]);
}
static ssize_t set_fan_min(struct device *dev, const char *buf,
size_t count, int nr)
struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ up(&data->update_lock);
return count;
}
static ssize_t set_fan_div(struct device *dev, const char *buf,
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
int i, min[3];
- u8 old = it87_read_value(client, IT87_REG_FAN_DIV);
+ u8 old;
+
+ down(&data->update_lock);
+ old = it87_read_value(client, IT87_REG_FAN_DIV);
for (i = 0; i < 3; i++)
min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i]));
else
data->fan_div[nr] = 3;
}
- val = old & 0x100;
+ val = old & 0x80;
val |= (data->fan_div[0] & 0x07);
val |= (data->fan_div[1] & 0x07) << 3;
if (data->fan_div[2] == 3)
data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i]));
it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]);
}
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_pwm_enable(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ if (val == 0) {
+ int tmp;
+ /* make sure the fan is on when in on/off mode */
+ tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+ it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr));
+ /* set on/off mode */
+ data->fan_main_ctrl &= ~(1 << nr);
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ } else if (val == 1) {
+ /* set SmartGuardian mode */
+ data->fan_main_ctrl |= (1 << nr);
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ /* set saved pwm value, clear FAN_CTLX PWM mode bit */
+ it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ } else {
+ up(&data->update_lock);
+ return -EINVAL;
+ }
+
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_pwm(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ down(&data->update_lock);
+ data->manual_pwm_ctl[nr] = val;
+ if (data->fan_main_ctrl & (1 << nr))
+ it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ up(&data->update_lock);
return count;
}
show_fan_offset(2);
show_fan_offset(3);
+#define show_pwm_offset(offset) \
+static ssize_t show_pwm##offset##_enable (struct device *dev, \
+ char *buf) \
+{ \
+ return show_pwm_enable(dev, buf, offset - 1); \
+} \
+static ssize_t show_pwm##offset (struct device *dev, char *buf) \
+{ \
+ return show_pwm(dev, buf, offset - 1); \
+} \
+static ssize_t set_pwm##offset##_enable (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm_enable(dev, buf, count, offset - 1); \
+} \
+static ssize_t set_pwm##offset (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ show_pwm##offset##_enable, \
+ set_pwm##offset##_enable); \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_pwm##offset , set_pwm##offset );
+
+show_pwm_offset(1);
+show_pwm_offset(2);
+show_pwm_offset(3);
+
/* Alarms */
static ssize_t show_alarms(struct device *dev, char *buf)
{
struct it87_data *data = it87_update_device(dev);
return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
}
-static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static ssize_t
show_vrm_reg(struct device *dev, char *buf)
/* SuperIO detection - will change normal_isa[0] if a chip is found */
static int it87_find(int *address)
{
- u16 val;
+ int err = -ENODEV;
superio_enter();
- chip_type = (superio_inb(DEVID) << 8) |
- superio_inb(DEVID + 1);
- if (chip_type != IT8712F_DEVID) {
- superio_exit();
- return -ENODEV;
- }
+ chip_type = superio_inw(DEVID);
+ if (chip_type != IT8712F_DEVID
+ && chip_type != IT8705F_DEVID)
+ goto exit;
superio_select();
- val = (superio_inb(IT87_BASE_REG) << 8) |
- superio_inb(IT87_BASE_REG + 1);
- superio_exit();
- *address = val & ~(IT87_EXTENT - 1);
+ if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
+ pr_info("it87: Device not activated, skipping\n");
+ goto exit;
+ }
+
+ *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
if (*address == 0) {
- return -ENODEV;
+ pr_info("it87: Base address not set, skipping\n");
+ goto exit;
}
- return 0;
+
+ err = 0;
+ pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+ chip_type, *address, superio_inb(DEVREV) & 0x0f);
+
+exit:
+ superio_exit();
+ return err;
}
/* This function is called by i2c_detect */
int err = 0;
const char *name = "";
int is_isa = i2c_is_isa_adapter(adapter);
+ int enable_pwm_interface;
if (!is_isa &&
!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
/* Reserve the ISA region */
if (is_isa)
- if (!request_region(address, IT87_EXTENT, name))
+ if (!request_region(address, IT87_EXTENT, it87_driver.name))
goto ERROR0;
/* Probe whether there is anything available on this address. Already
- done for SMBus clients */
+ done for SMBus and Super-I/O clients */
if (kind < 0) {
- if (is_isa) {
-
+ if (is_isa && !chip_type) {
#define REALLY_SLOW_IO
/* We need the timeouts for at least some IT87-like chips. But only
if we read 'undefined' registers. */
/* Fill in the remaining client fields and put it into the global list */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
-
data->type = kind;
-
- new_client->id = it87_id++;
data->valid = 0;
init_MUTEX(&data->update_lock);
if ((err = i2c_attach_client(new_client)))
goto ERROR2;
+ /* Check PWM configuration */
+ enable_pwm_interface = it87_check_pwm(new_client);
+
/* Initialize the IT87 chip */
it87_init_client(new_client, data);
device_create_file(&new_client->dev, &dev_attr_fan2_div);
device_create_file(&new_client->dev, &dev_attr_fan3_div);
device_create_file(&new_client->dev, &dev_attr_alarms);
+ if (enable_pwm_interface) {
+ device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+ device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+ device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+ device_create_file(&new_client->dev, &dev_attr_pwm1);
+ device_create_file(&new_client->dev, &dev_attr_pwm2);
+ device_create_file(&new_client->dev, &dev_attr_pwm3);
+ }
if (data->type == it8712) {
+ data->vrm = i2c_which_vrm();
device_create_file_vrm(new_client);
device_create_file_vid(new_client);
- data->vrm = i2c_which_vrm();
}
return 0;
return i2c_smbus_write_byte_data(client, reg, value);
}
+/* Return 1 if and only if the PWM interface is safe to use */
+static int it87_check_pwm(struct i2c_client *client)
+{
+ /* Some BIOSes fail to correctly configure the IT87 fans. All fans off
+ * and polarity set to active low is sign that this is the case so we
+ * disable pwm control to protect the user. */
+ int tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+ if ((tmp & 0x87) == 0) {
+ if (fix_pwm_polarity) {
+ /* The user asks us to attempt a chip reconfiguration.
+ * This means switching to active high polarity and
+ * inverting all fan speed values. */
+ int i;
+ u8 pwm[3];
+
+ for (i = 0; i < 3; i++)
+ pwm[i] = it87_read_value(client,
+ IT87_REG_PWM(i));
+
+ /* If any fan is in automatic pwm mode, the polarity
+ * might be correct, as suspicious as it seems, so we
+ * better don't change anything (but still disable the
+ * PWM interface). */
+ if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
+ dev_info(&client->dev, "Reconfiguring PWM to "
+ "active high polarity\n");
+ it87_write_value(client, IT87_REG_FAN_CTL,
+ tmp | 0x87);
+ for (i = 0; i < 3; i++)
+ it87_write_value(client,
+ IT87_REG_PWM(i),
+ 0x7f & ~pwm[i]);
+ return 1;
+ }
+
+ dev_info(&client->dev, "PWM configuration is "
+ "too broken to be fixed\n");
+ }
+
+ dev_info(&client->dev, "Detected broken BIOS "
+ "defaults, disabling PWM interface\n");
+ return 0;
+ } else if (fix_pwm_polarity) {
+ dev_info(&client->dev, "PWM configuration looks "
+ "sane, won't touch\n");
+ }
+
+ return 1;
+}
+
/* Called when we have found a new IT87. */
static void it87_init_client(struct i2c_client *client, struct it87_data *data)
{
- int tmp;
-
- if (reset) {
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others */
- it87_write_value(client, IT87_REG_CONFIG, 0x80);
+ int tmp, i;
+
+ /* initialize to sane defaults:
+ * - if the chip is in manual pwm mode, this will be overwritten with
+ * the actual settings on the chip (so in this case, initialization
+ * is not needed)
+ * - if in automatic or on/off mode, we could switch to manual mode,
+ * read the registers and set manual_pwm_ctl accordingly, but currently
+ * this is not implemented, so we initialize to something sane */
+ for (i = 0; i < 3; i++) {
+ data->manual_pwm_ctl[i] = 0xff;
}
/* Check if temperature channnels are reset manually or by some reason */
}
/* Check if tachometers are reset manually or by some reason */
- tmp = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
- if ((tmp & 0x70) == 0) {
+ data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+ if ((data->fan_main_ctrl & 0x70) == 0) {
/* Enable all fan tachometers */
- tmp = (tmp & 0x8f) | 0x70;
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, tmp);
+ data->fan_main_ctrl |= 0x70;
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
}
+ /* Set current fan mode registers and the default settings for the
+ * other mode registers */
+ for (i = 0; i < 3; i++) {
+ if (data->fan_main_ctrl & (1 << i)) {
+ /* pwm mode */
+ tmp = it87_read_value(client, IT87_REG_PWM(i));
+ if (tmp & 0x80) {
+ /* automatic pwm - not yet implemented, but
+ * leave the settings made by the BIOS alone
+ * until a change is requested via the sysfs
+ * interface */
+ } else {
+ /* manual pwm */
+ data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp);
+ }
+ }
+ }
+
/* Start monitoring */
it87_write_value(client, IT87_REG_CONFIG,
(it87_read_value(client, IT87_REG_CONFIG) & 0x36)
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
if (update_vbat) {
/* Cleared after each update, so reenable. Value
it87_read_value(client, IT87_REG_TEMP_LOW(i));
}
- /* The 8705 does not have VID capability */
- data->vid = 0x1f;
-
i = it87_read_value(client, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
it87_read_value(client, IT87_REG_ALARM1) |
(it87_read_value(client, IT87_REG_ALARM2) << 8) |
(it87_read_value(client, IT87_REG_ALARM3) << 16);
+ data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
/* The 8705 does not have VID capability */
MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Reset the chip's registers, default no");
+module_param(fix_pwm_polarity, bool, 0);
+MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)");
MODULE_LICENSE("GPL");
module_init(sm_it87_init);
git://git.onelab.eu / linux-2.6.git / blobdiff