#include <asm/io.h>
-#include "aec62xx.h"
-
-#if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
+struct chipset_bus_clock_list_entry {
+ u8 xfer_speed;
+ u8 chipset_settings;
+ u8 ultra_settings;
+};
-static u8 aec62xx_proc = 0;
+static struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
+ { XFER_UDMA_6, 0x31, 0x07 },
+ { XFER_UDMA_5, 0x31, 0x06 },
+ { XFER_UDMA_4, 0x31, 0x05 },
+ { XFER_UDMA_3, 0x31, 0x04 },
+ { XFER_UDMA_2, 0x31, 0x03 },
+ { XFER_UDMA_1, 0x31, 0x02 },
+ { XFER_UDMA_0, 0x31, 0x01 },
+
+ { XFER_MW_DMA_2, 0x31, 0x00 },
+ { XFER_MW_DMA_1, 0x31, 0x00 },
+ { XFER_MW_DMA_0, 0x0a, 0x00 },
+ { XFER_PIO_4, 0x31, 0x00 },
+ { XFER_PIO_3, 0x33, 0x00 },
+ { XFER_PIO_2, 0x08, 0x00 },
+ { XFER_PIO_1, 0x0a, 0x00 },
+ { XFER_PIO_0, 0x00, 0x00 },
+ { 0, 0x00, 0x00 }
+};
-#define AEC_MAX_DEVS 5
+static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
+ { XFER_UDMA_6, 0x41, 0x06 },
+ { XFER_UDMA_5, 0x41, 0x05 },
+ { XFER_UDMA_4, 0x41, 0x04 },
+ { XFER_UDMA_3, 0x41, 0x03 },
+ { XFER_UDMA_2, 0x41, 0x02 },
+ { XFER_UDMA_1, 0x41, 0x01 },
+ { XFER_UDMA_0, 0x41, 0x01 },
+
+ { XFER_MW_DMA_2, 0x41, 0x00 },
+ { XFER_MW_DMA_1, 0x42, 0x00 },
+ { XFER_MW_DMA_0, 0x7a, 0x00 },
+ { XFER_PIO_4, 0x41, 0x00 },
+ { XFER_PIO_3, 0x43, 0x00 },
+ { XFER_PIO_2, 0x78, 0x00 },
+ { XFER_PIO_1, 0x7a, 0x00 },
+ { XFER_PIO_0, 0x70, 0x00 },
+ { 0, 0x00, 0x00 }
+};
-static struct pci_dev *aec_devs[AEC_MAX_DEVS];
-static int n_aec_devs;
+#define BUSCLOCK(D) \
+ ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
-#undef DEBUG_AEC_REGS
-
-static int aec62xx_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- char *chipset_nums[] = {"error", "error", "error", "error",
- "error", "error", "850UF", "860",
- "860R", "865", "865R", "error" };
- int len;
- int i;
-
- for (i = 0; i < n_aec_devs; i++) {
- struct pci_dev *dev = aec_devs[i];
- unsigned long iobase = pci_resource_start(dev, 4);
- u8 c0 = 0, c1 = 0, art = 0;
-#ifdef DEBUG_AEC_REGS
- u8 uart = 0;
-#endif /* DEBUG_AEC_REGS */
-
- c0 = inb(iobase + 0x02);
- c1 = inb(iobase + 0x0a);
-
- p += sprintf(p, "\nController: %d\n", i);
- p += sprintf(p, "Chipset: AEC%s\n", chipset_nums[dev->device]);
-
- p += sprintf(p, "--------------- Primary Channel "
- "---------------- Secondary Channel "
- "-------------\n");
- (void) pci_read_config_byte(dev, 0x4a, &art);
- p += sprintf(p, " %sabled ",
- (art&0x02)?" en":"dis");
- p += sprintf(p, " %sabled\n",
- (art&0x04)?" en":"dis");
- p += sprintf(p, "--------------- drive0 --------- drive1 "
- "-------- drive0 ---------- drive1 ------\n");
- p += sprintf(p, "DMA enabled: %s %s ",
- (c0&0x20)?"yes":"no ",(c0&0x40)?"yes":"no ");
- p += sprintf(p, " %s %s\n",
- (c1&0x20)?"yes":"no ",(c1&0x40)?"yes":"no ");
-
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
- (void) pci_read_config_byte(dev, 0x54, &art);
- p += sprintf(p, "DMA Mode: %s(%s)",
- (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO",
- (art&0x02)?"2":(art&0x01)?"1":"0");
- p += sprintf(p, " %s(%s)",
- (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO",
- (art&0x08)?"2":(art&0x04)?"1":"0");
- p += sprintf(p, " %s(%s)",
- (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO",
- (art&0x20)?"2":(art&0x10)?"1":"0");
- p += sprintf(p, " %s(%s)\n",
- (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
- (art&0x80)?"2":(art&0x40)?"1":"0");
-#ifdef DEBUG_AEC_REGS
- (void) pci_read_config_byte(dev, 0x40, &art);
- p += sprintf(p, "Active: 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x42, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x44, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x46, &art);
- p += sprintf(p, " 0x%02x\n", art);
- (void) pci_read_config_byte(dev, 0x41, &art);
- p += sprintf(p, "Recovery: 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x43, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x45, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x47, &art);
- p += sprintf(p, " 0x%02x\n", art);
-#endif /* DEBUG_AEC_REGS */
- } else {
- /*
- * case PCI_DEVICE_ID_ARTOP_ATP860:
- * case PCI_DEVICE_ID_ARTOP_ATP860R:
- * case PCI_DEVICE_ID_ARTOP_ATP865:
- * case PCI_DEVICE_ID_ARTOP_ATP865R:
- */
- (void) pci_read_config_byte(dev, 0x44, &art);
- p += sprintf(p, "DMA Mode: %s(%s)",
- (c0&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
- ((art&0x07)==0x07)?"6":
- ((art&0x06)==0x06)?"5":
- ((art&0x05)==0x05)?"4":
- ((art&0x04)==0x04)?"3":
- ((art&0x03)==0x03)?"2":
- ((art&0x02)==0x02)?"1":
- ((art&0x01)==0x01)?"0":"?");
- p += sprintf(p, " %s(%s)",
- (c0&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
- ((art&0x70)==0x70)?"6":
- ((art&0x60)==0x60)?"5":
- ((art&0x50)==0x50)?"4":
- ((art&0x40)==0x40)?"3":
- ((art&0x30)==0x30)?"2":
- ((art&0x20)==0x20)?"1":
- ((art&0x10)==0x10)?"0":"?");
- (void) pci_read_config_byte(dev, 0x45, &art);
- p += sprintf(p, " %s(%s)",
- (c1&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
- ((art&0x07)==0x07)?"6":
- ((art&0x06)==0x06)?"5":
- ((art&0x05)==0x05)?"4":
- ((art&0x04)==0x04)?"3":
- ((art&0x03)==0x03)?"2":
- ((art&0x02)==0x02)?"1":
- ((art&0x01)==0x01)?"0":"?");
- p += sprintf(p, " %s(%s)\n",
- (c1&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
- ((art&0x70)==0x70)?"6":
- ((art&0x60)==0x60)?"5":
- ((art&0x50)==0x50)?"4":
- ((art&0x40)==0x40)?"3":
- ((art&0x30)==0x30)?"2":
- ((art&0x20)==0x20)?"1":
- ((art&0x10)==0x10)?"0":"?");
-#ifdef DEBUG_AEC_REGS
- (void) pci_read_config_byte(dev, 0x40, &art);
- p += sprintf(p, "Active: 0x%02x", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x41, &art);
- p += sprintf(p, " 0x%02x", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x42, &art);
- p += sprintf(p, " 0x%02x", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x43, &art);
- p += sprintf(p, " 0x%02x\n", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x40, &art);
- p += sprintf(p, "Recovery: 0x%02x", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x41, &art);
- p += sprintf(p, " 0x%02x", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x42, &art);
- p += sprintf(p, " 0x%02x", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x43, &art);
- p += sprintf(p, " 0x%02x\n", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x49, &uart);
- p += sprintf(p, "reg49h = 0x%02x ", uart);
- (void) pci_read_config_byte(dev, 0x4a, &uart);
- p += sprintf(p, "reg4ah = 0x%02x\n", uart);
-#endif /* DEBUG_AEC_REGS */
- }
- }
- /* p - buffer must be less than 4k! */
- len = (p - buffer) - offset;
- *addr = buffer + offset;
-
- return len > count ? count : len;
-}
-#endif /* defined(DISPLAY_AEC62xx_TIMINGS) && defined(CONFIG_PROC_FS) */
/*
* TO DO: active tuning and correction of cards without a bios.
switch(hwif->pci_dev->device) {
case PCI_DEVICE_ID_ARTOP_ATP865:
case PCI_DEVICE_ID_ARTOP_ATP865R:
-#if 0
- mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3;
-#else
mode = (hwif->INB(((hwif->channel) ?
hwif->mate->dma_status :
hwif->dma_status)) & 0x10) ? 4 : 3;
-#endif
break;
case PCI_DEVICE_ID_ARTOP_ATP860:
case PCI_DEVICE_ID_ARTOP_ATP860R:
unsigned long flags;
local_irq_save(flags);
+ /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
- SPLIT_BYTE(tmp0,tmp1,tmp2);
- MAKE_WORD(d_conf,tmp1,tmp2);
+ d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
tmp1 = 0x00;
unsigned long flags;
local_irq_save(flags);
+ /* high 4-bits: Active, low 4-bits: Recovery */
pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev));
pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
struct hd_driveid *id = drive->id;
if ((id->capability & 1) && drive->autodma) {
- /* Consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- goto fast_ata_pio;
- if (id->field_valid & 4) {
- if (id->dma_ultra & hwif->ultra_mask) {
- /* Force if Capable UltraDMA */
- int dma = config_chipset_for_dma(drive);
- if ((id->field_valid & 2) && !dma)
- goto try_dma_modes;
- }
- } else if (id->field_valid & 2) {
-try_dma_modes:
- if ((id->dma_mword & hwif->mwdma_mask) ||
- (id->dma_1word & hwif->swdma_mask)) {
- /* Force if Capable regular DMA modes */
- if (!config_chipset_for_dma(drive))
- goto no_dma_set;
- }
- } else if (__ide_dma_good_drive(drive) &&
- (id->eide_dma_time < 150)) {
- /* Consult the list of known "good" drives */
- if (!config_chipset_for_dma(drive))
- goto no_dma_set;
- } else {
- goto fast_ata_pio;
+
+ if (ide_use_dma(drive)) {
+ if (config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
}
- return hwif->ide_dma_on(drive);
+
+ goto fast_ata_pio;
+
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
-no_dma_set:
aec62xx_tune_drive(drive, 5);
return hwif->ide_dma_off_quietly(drive);
}
case PCI_DEVICE_ID_ARTOP_ATP865:
case PCI_DEVICE_ID_ARTOP_ATP865R:
printk(" AEC62XX time out ");
-#if 0
- {
- int i = 0;
- u8 reg49h = 0;
- pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, ®49h);
- for (i=0;i<256;i++)
- pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10);
- pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10);
- }
- return 0;
-#endif
default:
break;
}
-#if 0
- {
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- u8 tmp1 = 0, tmp2 = 0, mode6 = 0;
-
- pci_read_config_byte(dev, 0x44, &tmp1);
- pci_read_config_byte(dev, 0x45, &tmp2);
- printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2);
- mode6 = HWIF(drive)->INB(((hwif->channel) ?
- hwif->mate->dma_status :
- hwif->dma_status));
- printk(" AEC6280 133=%x ", (mode6 & 0x10));
- }
-#endif
return 0;
}
-static unsigned int __init init_chipset_aec62xx (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
{
int bus_speed = system_bus_clock();
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
}
-#if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
- aec_devs[n_aec_devs++] = dev;
-
- if (!aec62xx_proc) {
- aec62xx_proc = 1;
- ide_pci_create_host_proc("aec62xx", aec62xx_get_info);
- }
-#endif /* DISPLAY_AEC62XX_TIMINGS && CONFIG_PROC_FS */
-
if (bus_speed <= 33)
pci_set_drvdata(dev, (void *) aec6xxx_33_base);
else
pci_set_drvdata(dev, (void *) aec6xxx_34_base);
+ /* These are necessary to get AEC6280 Macintosh cards to work */
+ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
+ (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
+ u8 reg49h = 0, reg4ah = 0;
+ /* Clear reset and test bits. */
+ pci_read_config_byte(dev, 0x49, ®49h);
+ pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
+ /* Enable chip interrupt output. */
+ pci_read_config_byte(dev, 0x4a, ®4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
+ /* Enable burst mode. */
+ pci_read_config_byte(dev, 0x4a, ®4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
+ }
+
return dev->irq;
}
-static void __init init_hwif_aec62xx (ide_hwif_t *hwif)
+static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
hwif->autodma = 0;
hwif->tuneproc = &aec62xx_tune_drive;
hwif->drives[1].autodma = hwif->autodma;
}
-static void __init init_dma_aec62xx (ide_hwif_t *hwif, unsigned long dmabase)
+static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase)
{
struct pci_dev *dev = hwif->pci_dev;
ide_setup_dma(hwif, dmabase, 8);
}
-static void __init init_setup_aec62xx (struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
{
- ide_setup_pci_device(dev, d);
+ return ide_setup_pci_device(dev, d);
}
-static void __init init_setup_aec6x80 (struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
{
unsigned long bar4reg = pci_resource_start(dev, 4);
strcpy(d->name, "AEC6280R");
}
- ide_setup_pci_device(dev, d);
+ return ide_setup_pci_device(dev, d);
}
+static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
+ { /* 0 */
+ .name = "AEC6210",
+ .init_setup = init_setup_aec62xx,
+ .init_chipset = init_chipset_aec62xx,
+ .init_hwif = init_hwif_aec62xx,
+ .init_dma = init_dma_aec62xx,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .bootable = OFF_BOARD,
+ },{ /* 1 */
+ .name = "AEC6260",
+ .init_setup = init_setup_aec62xx,
+ .init_chipset = init_chipset_aec62xx,
+ .init_hwif = init_hwif_aec62xx,
+ .init_dma = init_dma_aec62xx,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 2 */
+ .name = "AEC6260R",
+ .init_setup = init_setup_aec62xx,
+ .init_chipset = init_chipset_aec62xx,
+ .init_hwif = init_hwif_aec62xx,
+ .init_dma = init_dma_aec62xx,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .bootable = NEVER_BOARD,
+ },{ /* 3 */
+ .name = "AEC6X80",
+ .init_setup = init_setup_aec6x80,
+ .init_chipset = init_chipset_aec62xx,
+ .init_hwif = init_hwif_aec62xx,
+ .init_dma = init_dma_aec62xx,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 4 */
+ .name = "AEC6X80R",
+ .init_setup = init_setup_aec6x80,
+ .init_chipset = init_chipset_aec62xx,
+ .init_hwif = init_hwif_aec62xx,
+ .init_dma = init_dma_aec62xx,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .bootable = OFF_BOARD,
+ }
+};
+
/**
* aec62xx_init_one - called when a AEC is found
* @dev: the aec62xx device
{
ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data];
- if (dev->device != d->device)
- BUG();
- d->init_setup(dev, d);
- return 0;
+ return d->init_setup(dev, d);
}
static struct pci_device_id aec62xx_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
static struct pci_driver driver = {
- .name = "AEC62xx IDE",
+ .name = "AEC62xx_IDE",
.id_table = aec62xx_pci_tbl,
.probe = aec62xx_init_one,
};
git://git.onelab.eu / linux-2.6.git / blobdiff