vserver 1.9.3

[linux-2.6.git] / drivers / ide / pci / alim15x3.c

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index eb51201..82a449d 100644 (file)
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -38,7 +38,7 @@
 
 #include <asm/io.h>
 
-#include "alim15x3.h"
+#define DISPLAY_ALI_TIMINGS
 
 /*
  *     ALi devices are not plug in. Otherwise these static values would
@@ -752,8 +752,8 @@ static void __init init_hwif_common_ali15x3 (ide_hwif_t *hwif)
        hwif->tuneproc = &ali15x3_tune_drive;
        hwif->speedproc = &ali15x3_tune_chipset;
 
-       /* Don't use LBA48 on ALi devices before rev 0xC5 */
-       hwif->no_lba48 = (m5229_revision <= 0xC4) ? 1 : 0;
+       /* don't use LBA48 DMA on ALi devices before rev 0xC5 */
+       hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0;
 
        if (!hwif->dma_base) {
                hwif->drives[0].autotune = 1;
@@ -853,6 +853,16 @@ static void __init init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
        ide_setup_dma(hwif, dmabase, 8);
 }
 
+static ide_pci_device_t ali15x3_chipset __devinitdata = {
+       .name           = "ALI15X3",
+       .init_chipset   = init_chipset_ali15x3,
+       .init_hwif      = init_hwif_ali15x3,
+       .init_dma       = init_dma_ali15x3,
+       .channels       = 2,
+       .autodma        = AUTODMA,
+       .bootable       = ON_BOARD,
+};
+
 /**
  *     alim15x3_init_one       -       set up an ALi15x3 IDE controller
  *     @dev: PCI device to set up
@@ -863,8 +873,8 @@ static void __init init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
  
 static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       ide_pci_device_t *d = &ali15x3_chipsets[id->driver_data];
-       
+       ide_pci_device_t *d = &ali15x3_chipset;
+
        if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL))
                printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n");
 
@@ -883,7 +893,7 @@ static struct pci_device_id alim15x3_pci_tbl[] = {
 MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
 
 static struct pci_driver driver = {
-       .name           = "ALI15x3 IDE",
+       .name           = "ALI15x3_IDE",
        .id_table       = alim15x3_pci_tbl,
        .probe          = alim15x3_init_one,
 };