/*
- * linux/drivers/ide/pci/hpt366.c Version 0.34 Sept 17, 2002
+ * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
+ * Portions Copyright (C) 2003 Red Hat Inc
*
* Thanks to HighPoint Technologies for their assistance, and hardware.
* Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
* Reset the hpt366 on error, reset on dma
* Fix disabling Fast Interrupt hpt366.
* Mike Waychison <crlf@sun.com>
+ *
+ * Added support for 372N clocking and clock switching. The 372N needs
+ * different clocks on read/write. This requires overloading rw_disk and
+ * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for
+ * keeping me sane.
+ * Alan Cox <alan@redhat.com>
+ *
*/
#include <asm/io.h>
#include <asm/irq.h>
-#include "hpt366.h"
+/* various tuning parameters */
+#define HPT_RESET_STATE_ENGINE
+#undef HPT_DELAY_INTERRUPT
+#undef HPT_SERIALIZE_IO
+
+static const char *quirk_drives[] = {
+ "QUANTUM FIREBALLlct08 08",
+ "QUANTUM FIREBALLP KA6.4",
+ "QUANTUM FIREBALLP LM20.4",
+ "QUANTUM FIREBALLP LM20.5",
+ NULL
+};
-#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-#endif /* defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS) */
+static const char *bad_ata100_5[] = {
+ "IBM-DTLA-307075",
+ "IBM-DTLA-307060",
+ "IBM-DTLA-307045",
+ "IBM-DTLA-307030",
+ "IBM-DTLA-307020",
+ "IBM-DTLA-307015",
+ "IBM-DTLA-305040",
+ "IBM-DTLA-305030",
+ "IBM-DTLA-305020",
+ "IC35L010AVER07-0",
+ "IC35L020AVER07-0",
+ "IC35L030AVER07-0",
+ "IC35L040AVER07-0",
+ "IC35L060AVER07-0",
+ "WDC AC310200R",
+ NULL
+};
-static unsigned int hpt_revision(struct pci_dev *dev);
-static unsigned int hpt_minimum_revision(struct pci_dev *dev, int revision);
+static const char *bad_ata66_4[] = {
+ "IBM-DTLA-307075",
+ "IBM-DTLA-307060",
+ "IBM-DTLA-307045",
+ "IBM-DTLA-307030",
+ "IBM-DTLA-307020",
+ "IBM-DTLA-307015",
+ "IBM-DTLA-305040",
+ "IBM-DTLA-305030",
+ "IBM-DTLA-305020",
+ "IC35L010AVER07-0",
+ "IC35L020AVER07-0",
+ "IC35L030AVER07-0",
+ "IC35L040AVER07-0",
+ "IC35L060AVER07-0",
+ "WDC AC310200R",
+ NULL
+};
-#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
+static const char *bad_ata66_3[] = {
+ "WDC AC310200R",
+ NULL
+};
-static u8 hpt366_proc = 0;
-static struct pci_dev *hpt_devs[HPT366_MAX_DEVS];
-static int n_hpt_devs;
+static const char *bad_ata33[] = {
+ "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
+ "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
+ "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
+ "Maxtor 90510D4",
+ "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
+ "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
+ "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
+ NULL
+};
-static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- char *chipset_nums[] = {"366", "366", "368",
- "370", "370A", "372",
- "302", "371", "374" };
- int i, len;
-
- p += sprintf(p, "\n "
- "HighPoint HPT366/368/370/372/374\n");
- for (i = 0; i < n_hpt_devs; i++) {
- struct pci_dev *dev = hpt_devs[i];
- unsigned long iobase = dev->resource[4].start;
- u32 class_rev = hpt_revision(dev);
- u8 c0, c1;
-
- p += sprintf(p, "\nController: %d\n", i);
- p += sprintf(p, "Chipset: HPT%s\n", chipset_nums[class_rev]);
- p += sprintf(p, "--------------- Primary Channel "
- "--------------- Secondary Channel "
- "--------------\n");
-
- /* get the bus master status registers */
- c0 = inb(iobase + 0x2);
- c1 = inb(iobase + 0xa);
- p += sprintf(p, "Enabled: %s"
- " %s\n",
- (c0 & 0x80) ? "no" : "yes",
- (c1 & 0x80) ? "no" : "yes");
+struct chipset_bus_clock_list_entry {
+ u8 xfer_speed;
+ unsigned int chipset_settings;
+};
+
+/* key for bus clock timings
+ * bit
+ * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
+ * DMA. cycles = value + 1
+ * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW
+ * DMA. cycles = value + 1
+ * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file
+ * register access.
+ * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file
+ * register access.
+ * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer.
+ * during task file register access.
+ * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA
+ * xfer.
+ * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task
+ * register access.
+ * 28 UDMA enable
+ * 29 DMA enable
+ * 30 PIO_MST enable. if set, the chip is in bus master mode during
+ * PIO.
+ * 31 FIFO enable.
+ */
+static struct chipset_bus_clock_list_entry forty_base_hpt366[] = {
+ { XFER_UDMA_4, 0x900fd943 },
+ { XFER_UDMA_3, 0x900ad943 },
+ { XFER_UDMA_2, 0x900bd943 },
+ { XFER_UDMA_1, 0x9008d943 },
+ { XFER_UDMA_0, 0x9008d943 },
+
+ { XFER_MW_DMA_2, 0xa008d943 },
+ { XFER_MW_DMA_1, 0xa010d955 },
+ { XFER_MW_DMA_0, 0xa010d9fc },
+
+ { XFER_PIO_4, 0xc008d963 },
+ { XFER_PIO_3, 0xc010d974 },
+ { XFER_PIO_2, 0xc010d997 },
+ { XFER_PIO_1, 0xc010d9c7 },
+ { XFER_PIO_0, 0xc018d9d9 },
+ { 0, 0x0120d9d9 }
+};
+
+static struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = {
+ { XFER_UDMA_4, 0x90c9a731 },
+ { XFER_UDMA_3, 0x90cfa731 },
+ { XFER_UDMA_2, 0x90caa731 },
+ { XFER_UDMA_1, 0x90cba731 },
+ { XFER_UDMA_0, 0x90c8a731 },
+
+ { XFER_MW_DMA_2, 0xa0c8a731 },
+ { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */
+ { XFER_MW_DMA_0, 0xa0c8a797 },
+
+ { XFER_PIO_4, 0xc0c8a731 },
+ { XFER_PIO_3, 0xc0c8a742 },
+ { XFER_PIO_2, 0xc0d0a753 },
+ { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */
+ { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */
+ { 0, 0x0120a7a7 }
+};
+
+static struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = {
+ { XFER_UDMA_4, 0x90c98521 },
+ { XFER_UDMA_3, 0x90cf8521 },
+ { XFER_UDMA_2, 0x90cf8521 },
+ { XFER_UDMA_1, 0x90cb8521 },
+ { XFER_UDMA_0, 0x90cb8521 },
+
+ { XFER_MW_DMA_2, 0xa0ca8521 },
+ { XFER_MW_DMA_1, 0xa0ca8532 },
+ { XFER_MW_DMA_0, 0xa0ca8575 },
+
+ { XFER_PIO_4, 0xc0ca8521 },
+ { XFER_PIO_3, 0xc0ca8532 },
+ { XFER_PIO_2, 0xc0ca8542 },
+ { XFER_PIO_1, 0xc0d08572 },
+ { XFER_PIO_0, 0xc0d08585 },
+ { 0, 0x01208585 }
+};
+
+/* from highpoint documentation. these are old values */
+static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = {
+/* { XFER_UDMA_5, 0x1A85F442, 0x16454e31 }, */
+ { XFER_UDMA_5, 0x16454e31 },
+ { XFER_UDMA_4, 0x16454e31 },
+ { XFER_UDMA_3, 0x166d4e31 },
+ { XFER_UDMA_2, 0x16494e31 },
+ { XFER_UDMA_1, 0x164d4e31 },
+ { XFER_UDMA_0, 0x16514e31 },
+
+ { XFER_MW_DMA_2, 0x26514e21 },
+ { XFER_MW_DMA_1, 0x26514e33 },
+ { XFER_MW_DMA_0, 0x26514e97 },
+
+ { XFER_PIO_4, 0x06514e21 },
+ { XFER_PIO_3, 0x06514e22 },
+ { XFER_PIO_2, 0x06514e33 },
+ { XFER_PIO_1, 0x06914e43 },
+ { XFER_PIO_0, 0x06914e57 },
+ { 0, 0x06514e57 }
+};
+
+static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = {
+ { XFER_UDMA_5, 0x14846231 },
+ { XFER_UDMA_4, 0x14886231 },
+ { XFER_UDMA_3, 0x148c6231 },
+ { XFER_UDMA_2, 0x148c6231 },
+ { XFER_UDMA_1, 0x14906231 },
+ { XFER_UDMA_0, 0x14986231 },
+
+ { XFER_MW_DMA_2, 0x26514e21 },
+ { XFER_MW_DMA_1, 0x26514e33 },
+ { XFER_MW_DMA_0, 0x26514e97 },
+
+ { XFER_PIO_4, 0x06514e21 },
+ { XFER_PIO_3, 0x06514e22 },
+ { XFER_PIO_2, 0x06514e33 },
+ { XFER_PIO_1, 0x06914e43 },
+ { XFER_PIO_0, 0x06914e57 },
+ { 0, 0x06514e57 }
+};
+
+/* these are the current (4 sep 2001) timings from highpoint */
+static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = {
+ { XFER_UDMA_5, 0x12446231 },
+ { XFER_UDMA_4, 0x12446231 },
+ { XFER_UDMA_3, 0x126c6231 },
+ { XFER_UDMA_2, 0x12486231 },
+ { XFER_UDMA_1, 0x124c6233 },
+ { XFER_UDMA_0, 0x12506297 },
+
+ { XFER_MW_DMA_2, 0x22406c31 },
+ { XFER_MW_DMA_1, 0x22406c33 },
+ { XFER_MW_DMA_0, 0x22406c97 },
+
+ { XFER_PIO_4, 0x06414e31 },
+ { XFER_PIO_3, 0x06414e42 },
+ { XFER_PIO_2, 0x06414e53 },
+ { XFER_PIO_1, 0x06814e93 },
+ { XFER_PIO_0, 0x06814ea7 },
+ { 0, 0x06814ea7 }
+};
+
+/* 2x 33MHz timings */
+static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = {
+ { XFER_UDMA_5, 0x1488e673 },
+ { XFER_UDMA_4, 0x1488e673 },
+ { XFER_UDMA_3, 0x1498e673 },
+ { XFER_UDMA_2, 0x1490e673 },
+ { XFER_UDMA_1, 0x1498e677 },
+ { XFER_UDMA_0, 0x14a0e73f },
+
+ { XFER_MW_DMA_2, 0x2480fa73 },
+ { XFER_MW_DMA_1, 0x2480fa77 },
+ { XFER_MW_DMA_0, 0x2480fb3f },
+
+ { XFER_PIO_4, 0x0c82be73 },
+ { XFER_PIO_3, 0x0c82be95 },
+ { XFER_PIO_2, 0x0c82beb7 },
+ { XFER_PIO_1, 0x0d02bf37 },
+ { XFER_PIO_0, 0x0d02bf5f },
+ { 0, 0x0d02bf5f }
+};
+
+static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = {
+ { XFER_UDMA_5, 0x12848242 },
+ { XFER_UDMA_4, 0x12ac8242 },
+ { XFER_UDMA_3, 0x128c8242 },
+ { XFER_UDMA_2, 0x120c8242 },
+ { XFER_UDMA_1, 0x12148254 },
+ { XFER_UDMA_0, 0x121882ea },
+
+ { XFER_MW_DMA_2, 0x22808242 },
+ { XFER_MW_DMA_1, 0x22808254 },
+ { XFER_MW_DMA_0, 0x228082ea },
+
+ { XFER_PIO_4, 0x0a81f442 },
+ { XFER_PIO_3, 0x0a81f443 },
+ { XFER_PIO_2, 0x0a81f454 },
+ { XFER_PIO_1, 0x0ac1f465 },
+ { XFER_PIO_0, 0x0ac1f48a },
+ { 0, 0x0ac1f48a }
+};
+
+static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = {
+ { XFER_UDMA_6, 0x1c81dc62 },
+ { XFER_UDMA_5, 0x1c6ddc62 },
+ { XFER_UDMA_4, 0x1c8ddc62 },
+ { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */
+ { XFER_UDMA_2, 0x1c91dc62 },
+ { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */
+ { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */
+
+ { XFER_MW_DMA_2, 0x2c829262 },
+ { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */
+ { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */
+
+ { XFER_PIO_4, 0x0c829c62 },
+ { XFER_PIO_3, 0x0c829c84 },
+ { XFER_PIO_2, 0x0c829ca6 },
+ { XFER_PIO_1, 0x0d029d26 },
+ { XFER_PIO_0, 0x0d029d5e },
+ { 0, 0x0d029d5e }
+};
+
+static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = {
+ { XFER_UDMA_5, 0x12848242 },
+ { XFER_UDMA_4, 0x12ac8242 },
+ { XFER_UDMA_3, 0x128c8242 },
+ { XFER_UDMA_2, 0x120c8242 },
+ { XFER_UDMA_1, 0x12148254 },
+ { XFER_UDMA_0, 0x121882ea },
+
+ { XFER_MW_DMA_2, 0x22808242 },
+ { XFER_MW_DMA_1, 0x22808254 },
+ { XFER_MW_DMA_0, 0x228082ea },
+
+ { XFER_PIO_4, 0x0a81f442 },
+ { XFER_PIO_3, 0x0a81f443 },
+ { XFER_PIO_2, 0x0a81f454 },
+ { XFER_PIO_1, 0x0ac1f465 },
+ { XFER_PIO_0, 0x0ac1f48a },
+ { 0, 0x0a81f443 }
+};
+
+static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = {
+ { XFER_UDMA_6, 0x1c869c62 },
+ { XFER_UDMA_5, 0x1cae9c62 },
+ { XFER_UDMA_4, 0x1c8a9c62 },
+ { XFER_UDMA_3, 0x1c8e9c62 },
+ { XFER_UDMA_2, 0x1c929c62 },
+ { XFER_UDMA_1, 0x1c9a9c62 },
+ { XFER_UDMA_0, 0x1c829c62 },
+
+ { XFER_MW_DMA_2, 0x2c829c62 },
+ { XFER_MW_DMA_1, 0x2c829c66 },
+ { XFER_MW_DMA_0, 0x2c829d2e },
+
+ { XFER_PIO_4, 0x0c829c62 },
+ { XFER_PIO_3, 0x0c829c84 },
+ { XFER_PIO_2, 0x0c829ca6 },
+ { XFER_PIO_1, 0x0d029d26 },
+ { XFER_PIO_0, 0x0d029d5e },
+ { 0, 0x0d029d26 }
+};
+
+static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = {
+ { XFER_UDMA_6, 0x12808242 },
+ { XFER_UDMA_5, 0x12848242 },
+ { XFER_UDMA_4, 0x12ac8242 },
+ { XFER_UDMA_3, 0x128c8242 },
+ { XFER_UDMA_2, 0x120c8242 },
+ { XFER_UDMA_1, 0x12148254 },
+ { XFER_UDMA_0, 0x121882ea },
+
+ { XFER_MW_DMA_2, 0x22808242 },
+ { XFER_MW_DMA_1, 0x22808254 },
+ { XFER_MW_DMA_0, 0x228082ea },
+
+ { XFER_PIO_4, 0x0a81f442 },
+ { XFER_PIO_3, 0x0a81f443 },
+ { XFER_PIO_2, 0x0a81f454 },
+ { XFER_PIO_1, 0x0ac1f465 },
+ { XFER_PIO_0, 0x0ac1f48a },
+ { 0, 0x06814e93 }
+};
+
+/* FIXME: 50MHz timings for HPT374 */
+
+#if 0
+static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = {
+ { XFER_UDMA_6, 0x12406231 }, /* checkme */
+ { XFER_UDMA_5, 0x12446231 }, /* 0x14846231 */
+ { XFER_UDMA_4, 0x16814ea7 }, /* 0x14886231 */
+ { XFER_UDMA_3, 0x16814ea7 }, /* 0x148c6231 */
+ { XFER_UDMA_2, 0x16814ea7 }, /* 0x148c6231 */
+ { XFER_UDMA_1, 0x16814ea7 }, /* 0x14906231 */
+ { XFER_UDMA_0, 0x16814ea7 }, /* 0x14986231 */
+ { XFER_MW_DMA_2, 0x16814ea7 }, /* 0x26514e21 */
+ { XFER_MW_DMA_1, 0x16814ea7 }, /* 0x26514e97 */
+ { XFER_MW_DMA_0, 0x16814ea7 }, /* 0x26514e97 */
+ { XFER_PIO_4, 0x06814ea7 }, /* 0x06514e21 */
+ { XFER_PIO_3, 0x06814ea7 }, /* 0x06514e22 */
+ { XFER_PIO_2, 0x06814ea7 }, /* 0x06514e33 */
+ { XFER_PIO_1, 0x06814ea7 }, /* 0x06914e43 */
+ { XFER_PIO_0, 0x06814ea7 }, /* 0x06914e57 */
+ { 0, 0x06814ea7 }
+};
+#endif
+
+#define HPT366_DEBUG_DRIVE_INFO 0
+#define HPT374_ALLOW_ATA133_6 0
+#define HPT371_ALLOW_ATA133_6 0
+#define HPT302_ALLOW_ATA133_6 0
+#define HPT372_ALLOW_ATA133_6 1
+#define HPT370_ALLOW_ATA100_5 1
+#define HPT366_ALLOW_ATA66_4 1
+#define HPT366_ALLOW_ATA66_3 1
+#define HPT366_MAX_DEVS 8
+
+#define F_LOW_PCI_33 0x23
+#define F_LOW_PCI_40 0x29
+#define F_LOW_PCI_50 0x2d
+#define F_LOW_PCI_66 0x42
+
+/* FIXME: compare with driver's code before removing */
#if 0
if (hpt_minimum_revision(dev, 3)) {
u8 cbl;
(cbl & 0x01) ? 33 : 66);
p += sprintf(p, "\n");
}
-#endif
- p += sprintf(p, "--------------- drive0 --------- drive1 "
- "------- drive0 ---------- drive1 -------\n");
- p += sprintf(p, "DMA capable: %s %s"
- " %s %s\n",
- (c0 & 0x20) ? "yes" : "no ",
- (c0 & 0x40) ? "yes" : "no ",
- (c1 & 0x20) ? "yes" : "no ",
- (c1 & 0x40) ? "yes" : "no ");
-
{
u8 c2, c3;
/* older revs don't have these registers mapped
(c3 & 0x80) ? "PIO " : "off ");
}
}
- p += sprintf(p, "\n");
-
- /* p - buffer must be less than 4k! */
- len = (p - buffer) - offset;
- *addr = buffer + offset;
-
- return len > count ? count : len;
-}
-#endif /* defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS) */
+#endif
static u32 hpt_revision (struct pci_dev *dev)
{
class_rev &= 0xff;
switch(dev->device) {
+ /* Remap new 372N onto 372 */
+ case PCI_DEVICE_ID_TTI_HPT372N:
+ class_rev = PCI_DEVICE_ID_TTI_HPT372; break;
case PCI_DEVICE_ID_TTI_HPT374:
class_rev = PCI_DEVICE_ID_TTI_HPT374; break;
case PCI_DEVICE_ID_TTI_HPT371:
return mode;
}
+/*
+ * Note for the future; the SATA hpt37x we must set
+ * either PIO or UDMA modes 0,4,5
+ */
+
static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
return chipset_table->chipset_settings;
}
-static void hpt366_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
reg2 &= ~0x80000000;
pci_write_config_dword(dev, regtime, reg2);
-}
-static void hpt368_tune_chipset (ide_drive_t *drive, u8 speed)
-{
- hpt366_tune_chipset(drive, speed);
+ return ide_config_drive_speed(drive, speed);
}
-static void hpt370_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
}
pci_write_config_dword(dev, drive_pci, list_conf);
+
+ return ide_config_drive_speed(drive, speed);
}
-static void hpt372_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
if (speed < XFER_MW_DMA_0)
list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
pci_write_config_dword(dev, drive_pci, list_conf);
-}
-static void hpt374_tune_chipset (ide_drive_t *drive, u8 speed)
-{
- hpt372_tune_chipset(drive, speed);
+ return ide_config_drive_speed(drive, speed);
}
static int hpt3xx_tune_chipset (ide_drive_t *drive, u8 speed)
struct pci_dev *dev = HWIF(drive)->pci_dev;
if (hpt_minimum_revision(dev, 8))
- hpt374_tune_chipset(drive, speed);
+ return hpt372_tune_chipset(drive, speed); /* not a typo */
#if 0
else if (hpt_minimum_revision(dev, 7))
hpt371_tune_chipset(drive, speed);
hpt302_tune_chipset(drive, speed);
#endif
else if (hpt_minimum_revision(dev, 5))
- hpt372_tune_chipset(drive, speed);
+ return hpt372_tune_chipset(drive, speed);
else if (hpt_minimum_revision(dev, 3))
- hpt370_tune_chipset(drive, speed);
- else if (hpt_minimum_revision(dev, 2))
- hpt368_tune_chipset(drive, speed);
- else
- hpt366_tune_chipset(drive, speed);
-
- return ((int) ide_config_drive_speed(drive, speed));
+ return hpt370_tune_chipset(drive, speed);
+ else /* hpt368: hpt_minimum_revision(dev, 2) */
+ return hpt36x_tune_chipset(drive, speed);
}
static void hpt3xx_tune_drive (ide_drive_t *drive, u8 pio)
drive->init_speed = 0;
if (id && (id->capability & 1) && drive->autodma) {
- /* Consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- goto fast_ata_pio;
- if (id->field_valid & 4) {
- if (id->dma_ultra & hwif->ultra_mask) {
- /* Force if Capable UltraDMA */
- int dma = config_chipset_for_dma(drive);
- if ((id->field_valid & 2) && !dma)
- goto try_dma_modes;
- }
- } else if (id->field_valid & 2) {
-try_dma_modes:
- if (id->dma_mword & hwif->mwdma_mask) {
- /* Force if Capable regular DMA modes */
- if (!config_chipset_for_dma(drive))
- goto no_dma_set;
- }
- } else if (__ide_dma_good_drive(drive) &&
- (id->eide_dma_time < 150)) {
- /* Consult the list of known "good" drives */
- if (!config_chipset_for_dma(drive))
- goto no_dma_set;
- } else {
- goto fast_ata_pio;
+
+ if (ide_use_dma(drive)) {
+ if (config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
}
- return hwif->ide_dma_on(drive);
+
+ goto fast_ata_pio;
+
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
-no_dma_set:
hpt3xx_tune_drive(drive, 5);
return hwif->ide_dma_off_quietly(drive);
}
/* how about we flush and reset, mmmkay? */
pci_write_config_byte(dev, 0x51, 0x1F);
/* fall through to a reset */
- case ide_dma_begin:
+ case dma_start:
case ide_dma_end:
/* reset the chips state over and over.. */
pci_write_config_byte(dev, 0x51, 0x13);
udelay(10);
}
-static int hpt370_ide_dma_begin (ide_drive_t *drive)
+static void hpt370_ide_dma_start(ide_drive_t *drive)
{
#ifdef HPT_RESET_STATE_ENGINE
hpt370_clear_engine(drive);
#endif
- return __ide_dma_begin(drive);
+ ide_dma_start(drive);
}
static int hpt370_ide_dma_end (ide_drive_t *drive)
return __ide_dma_end(drive);
}
+/**
+ * hpt372n_set_clock - perform clock switching dance
+ * @drive: Drive to switch
+ * @mode: Switching mode (0x21 for write, 0x23 otherwise)
+ *
+ * Switch the DPLL clock on the HPT372N devices. This is a
+ * right mess.
+ */
+
+static void hpt372n_set_clock(ide_drive_t *drive, int mode)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+
+ /* FIXME: should we check for DMA active and BUG() */
+ /* Tristate the bus */
+ outb(0x80, hwif->dma_base+0x73);
+ outb(0x80, hwif->dma_base+0x77);
+
+ /* Switch clock and reset channels */
+ outb(mode, hwif->dma_base+0x7B);
+ outb(0xC0, hwif->dma_base+0x79);
+
+ /* Reset state machines */
+ outb(0x37, hwif->dma_base+0x70);
+ outb(0x37, hwif->dma_base+0x74);
+
+ /* Complete reset */
+ outb(0x00, hwif->dma_base+0x79);
+
+ /* Reconnect channels to bus */
+ outb(0x00, hwif->dma_base+0x73);
+ outb(0x00, hwif->dma_base+0x77);
+}
+
+/**
+ * hpt372n_rw_disk - prepare for I/O
+ * @drive: drive for command
+ * @rq: block request structure
+ *
+ * This is called when a disk I/O is issued to the 372N.
+ * We need it because of the clock switching.
+ */
+
+static void hpt372n_rw_disk(ide_drive_t *drive, struct request *rq)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ int wantclock;
+
+ wantclock = rq_data_dir(rq) ? 0x23 : 0x21;
+
+ if (hwif->config_data != wantclock) {
+ hpt372n_set_clock(drive, wantclock);
+ hwif->config_data = wantclock;
+ }
+}
+
/*
* Since SUN Cobalt is attempting to do this operation, I should disclose
* this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date
u8 reg59h = 0, reset = (hwif->channel) ? 0x80 : 0x40;
u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53;
- if (!hwif)
- return -EINVAL;
-
// hwif->bus_state = state;
pci_read_config_byte(dev, 0x59, ®59h);
u8 tristate = 0, resetmask = 0, bus_reg = 0;
u16 tri_reg;
- if (!hwif)
- return -EINVAL;
-
hwif->bus_state = state;
if (hwif->channel) {
u16 freq;
u32 pll;
u8 reg5bh;
-
-#if 1
u8 reg5ah = 0;
+ unsigned long dmabase = pci_resource_start(dev, 4);
+ u8 did, rid;
+ int is_372n = 0;
+
pci_read_config_byte(dev, 0x5a, ®5ah);
/* interrupt force enable */
pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10));
-#endif
+
+ if(dmabase)
+ {
+ did = inb(dmabase + 0x22);
+ rid = inb(dmabase + 0x28);
+
+ if((did == 4 && rid == 6) || (did == 5 && rid > 1))
+ is_372n = 1;
+ }
/*
* default to pci clock. make sure MA15/16 are set to output
/*
* set up the PLL. we need to adjust it so that it's stable.
* freq = Tpll * 192 / Tpci
+ *
+ * Todo. For non x86 should probably check the dword is
+ * set to 0xABCDExxx indicating the BIOS saved f_CNT
*/
pci_read_config_word(dev, 0x78, &freq);
freq &= 0x1FF;
- if (freq < 0xa0) {
- pll = F_LOW_PCI_33;
- if (hpt_minimum_revision(dev,8))
- pci_set_drvdata(dev, (void *) thirty_three_base_hpt374);
- else if (hpt_minimum_revision(dev,5))
- pci_set_drvdata(dev, (void *) thirty_three_base_hpt372);
- else if (hpt_minimum_revision(dev,4))
- pci_set_drvdata(dev, (void *) thirty_three_base_hpt370a);
+
+ /*
+ * The 372N uses different PCI clock information and has
+ * some other complications
+ * On PCI33 timing we must clock switch
+ * On PCI66 timing we must NOT use the PCI clock
+ *
+ * Currently we always set up the PLL for the 372N
+ */
+
+ pci_set_drvdata(dev, NULL);
+
+ if(is_372n)
+ {
+ printk(KERN_INFO "hpt: HPT372N detected, using 372N timing.\n");
+ if(freq < 0x55)
+ pll = F_LOW_PCI_33;
+ else if(freq < 0x70)
+ pll = F_LOW_PCI_40;
+ else if(freq < 0x7F)
+ pll = F_LOW_PCI_50;
else
- pci_set_drvdata(dev, (void *) thirty_three_base_hpt370);
- printk("HPT37X: using 33MHz PCI clock\n");
- } else if (freq < 0xb0) {
- pll = F_LOW_PCI_40;
- } else if (freq < 0xc8) {
- pll = F_LOW_PCI_50;
- if (hpt_minimum_revision(dev,8))
- pci_set_drvdata(dev, NULL);
- else if (hpt_minimum_revision(dev,5))
- pci_set_drvdata(dev, (void *) fifty_base_hpt372);
- else if (hpt_minimum_revision(dev,4))
- pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
+ pll = F_LOW_PCI_66;
+
+ printk(KERN_INFO "FREQ: %d PLL: %d\n", freq, pll);
+
+ /* We always use the pll not the PCI clock on 372N */
+ }
+ else
+ {
+ if(freq < 0x9C)
+ pll = F_LOW_PCI_33;
+ else if(freq < 0xb0)
+ pll = F_LOW_PCI_40;
+ else if(freq <0xc8)
+ pll = F_LOW_PCI_50;
else
- pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
- printk("HPT37X: using 50MHz PCI clock\n");
- } else {
- pll = F_LOW_PCI_66;
- if (hpt_minimum_revision(dev,8))
- {
- printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n");
- pci_set_drvdata(dev, NULL);
+ pll = F_LOW_PCI_66;
+
+ if (pll == F_LOW_PCI_33) {
+ if (hpt_minimum_revision(dev,8))
+ pci_set_drvdata(dev, (void *) thirty_three_base_hpt374);
+ else if (hpt_minimum_revision(dev,5))
+ pci_set_drvdata(dev, (void *) thirty_three_base_hpt372);
+ else if (hpt_minimum_revision(dev,4))
+ pci_set_drvdata(dev, (void *) thirty_three_base_hpt370a);
+ else
+ pci_set_drvdata(dev, (void *) thirty_three_base_hpt370);
+ printk("HPT37X: using 33MHz PCI clock\n");
+ } else if (pll == F_LOW_PCI_40) {
+ /* Unsupported */
+ } else if (pll == F_LOW_PCI_50) {
+ if (hpt_minimum_revision(dev,8))
+ pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
+ else if (hpt_minimum_revision(dev,5))
+ pci_set_drvdata(dev, (void *) fifty_base_hpt372);
+ else if (hpt_minimum_revision(dev,4))
+ pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
+ else
+ pci_set_drvdata(dev, (void *) fifty_base_hpt370a);
+ printk("HPT37X: using 50MHz PCI clock\n");
+ } else {
+ if (hpt_minimum_revision(dev,8))
+ {
+ printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n");
+ }
+ else if (hpt_minimum_revision(dev,5))
+ pci_set_drvdata(dev, (void *) sixty_six_base_hpt372);
+ else if (hpt_minimum_revision(dev,4))
+ pci_set_drvdata(dev, (void *) sixty_six_base_hpt370a);
+ else
+ pci_set_drvdata(dev, (void *) sixty_six_base_hpt370);
+ printk("HPT37X: using 66MHz PCI clock\n");
}
- else if (hpt_minimum_revision(dev,5))
- pci_set_drvdata(dev, (void *) sixty_six_base_hpt372);
- else if (hpt_minimum_revision(dev,4))
- pci_set_drvdata(dev, (void *) sixty_six_base_hpt370a);
- else
- pci_set_drvdata(dev, (void *) sixty_six_base_hpt370);
- printk("HPT37X: using 66MHz PCI clock\n");
}
/*
}
if (ret)
return ret;
-
-#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
- hpt_devs[n_hpt_devs++] = dev;
-
- if (!hpt366_proc) {
- hpt366_proc = 1;
- ide_pci_create_host_proc("hpt366", hpt366_get_info);
- }
-#endif /* DISPLAY_HPT366_TIMINGS && CONFIG_PROC_FS */
return dev->irq;
}
{
struct pci_dev *dev = hwif->pci_dev;
u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02;
-
+ u8 did, rid;
+ unsigned long dmabase = hwif->dma_base;
+ int is_372n = 0;
+
+ if(dmabase)
+ {
+ did = inb(dmabase + 0x22);
+ rid = inb(dmabase + 0x28);
+
+ if((did == 4 && rid == 6) || (did == 5 && rid > 1))
+ is_372n = 1;
+ }
+
hwif->tuneproc = &hpt3xx_tune_drive;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;
+
+ if(is_372n)
+ hwif->rw_disk = &hpt372n_rw_disk;
/*
* The HPT37x uses the CBLID pins as outputs for MA15/MA16
hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
hwif->ide_dma_end = &hpt374_ide_dma_end;
} else if (hpt_minimum_revision(dev,3)) {
- hwif->ide_dma_begin = &hpt370_ide_dma_begin;
+ hwif->dma_start = &hpt370_ide_dma_start;
hwif->ide_dma_end = &hpt370_ide_dma_end;
hwif->ide_dma_timeout = &hpt370_ide_dma_timeout;
hwif->ide_dma_lostirq = &hpt370_ide_dma_lostirq;
ide_setup_dma(hwif, dmabase, 8);
}
-static void __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *findev = NULL;
if (PCI_FUNC(dev->devfn) & 1)
- return;
+ return -ENODEV;
while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
if ((findev->vendor == dev->vendor) &&
printk(KERN_WARNING "%s: pci-config space interrupt "
"fixed.\n", d->name);
}
- ide_setup_pci_devices(dev, findev, d);
- return;
+ return ide_setup_pci_devices(dev, findev, d);
}
}
- ide_setup_pci_device(dev, d);
+ return ide_setup_pci_device(dev, d);
}
-static void __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d)
{
- ide_setup_pci_device(dev, d);
+ return ide_setup_pci_device(dev, d);
}
-static void __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *findev = NULL;
u8 pin1 = 0, pin2 = 0;
unsigned int class_rev;
char *chipset_names[] = {"HPT366", "HPT366", "HPT368",
- "HPT370", "HPT370A", "HPT372"};
+ "HPT370", "HPT370A", "HPT372",
+ "HPT372N" };
if (PCI_FUNC(dev->devfn) & 1)
- return;
+ return -ENODEV;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
- strcpy(d->name, chipset_names[class_rev]);
+ if(dev->device == PCI_DEVICE_ID_TTI_HPT372N)
+ class_rev = 6;
+
+ if(class_rev <= 6)
+ d->name = chipset_names[class_rev];
switch(class_rev) {
+ case 6:
case 5:
case 4:
- case 3: ide_setup_pci_device(dev, d);
- return;
- default: break;
+ case 3:
+ goto init_single;
+ default:
+ break;
}
d->channels = 1;
"pin1=%d pin2=%d\n", d->name,
pin1, pin2);
}
- ide_setup_pci_devices(dev, findev, d);
- return;
+ return ide_setup_pci_devices(dev, findev, d);
}
}
- ide_setup_pci_device(dev, d);
+init_single:
+ return ide_setup_pci_device(dev, d);
}
+static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
+ { /* 0 */
+ .name = "HPT366",
+ .init_setup = init_setup_hpt366,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ .extra = 240
+ },{ /* 1 */
+ .name = "HPT372A",
+ .init_setup = init_setup_hpt37x,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 2 */
+ .name = "HPT302",
+ .init_setup = init_setup_hpt37x,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 3 */
+ .name = "HPT371",
+ .init_setup = init_setup_hpt37x,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 4 */
+ .name = "HPT374",
+ .init_setup = init_setup_hpt374,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ .channels = 2, /* 4 */
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 5 */
+ .name = "HPT372N",
+ .init_setup = init_setup_hpt37x,
+ .init_chipset = init_chipset_hpt366,
+ .init_hwif = init_hwif_hpt366,
+ .init_dma = init_dma_hpt366,
+ .channels = 2, /* 4 */
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ }
+};
/**
* hpt366_init_one - called when an HPT366 is found
{
ide_pci_device_t *d = &hpt366_chipsets[id->driver_data];
- d->init_setup(dev, d);
- return 0;
+ return d->init_setup(dev, d);
}
static struct pci_device_id hpt366_pci_tbl[] = {
{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT374, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
+ { PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372N, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);
static struct pci_driver driver = {
- .name = "HPT366 IDE",
+ .name = "HPT366_IDE",
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
};
git://git.onelab.eu / linux-2.6.git / blobdiff