* Split from:
* linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2005-2006 MontaVista Software, Inc.
* Portions Copyright (C) 1999 Promise Technology, Inc.
* Author: Frank Tiernan (frankt@promise.com)
* Released under terms of General Public License
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <asm/pci-bridge.h>
#endif
-#include "pdc202xx_new.h"
-
#define PDC202_DEBUG_CABLE 0
-#if defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 pdcnew_proc = 0;
-#define PDC202_MAX_DEVS 5
-static struct pci_dev *pdc202_devs[PDC202_MAX_DEVS];
-static int n_pdc202_devs;
-
-static char * pdcnew_info(char *buf, struct pci_dev *dev)
-{
- char *p = buf;
-
- p += sprintf(p, "\n ");
- switch(dev->device) {
- case PCI_DEVICE_ID_PROMISE_20277:
- p += sprintf(p, "SBFastTrak 133 Lite"); break;
- case PCI_DEVICE_ID_PROMISE_20276:
- p += sprintf(p, "MBFastTrak 133 Lite"); break;
- case PCI_DEVICE_ID_PROMISE_20275:
- p += sprintf(p, "MBUltra133"); break;
- case PCI_DEVICE_ID_PROMISE_20271:
- p += sprintf(p, "FastTrak TX2000"); break;
- case PCI_DEVICE_ID_PROMISE_20270:
- p += sprintf(p, "FastTrak LP/TX2/TX4"); break;
- case PCI_DEVICE_ID_PROMISE_20269:
- p += sprintf(p, "Ultra133 TX2"); break;
- case PCI_DEVICE_ID_PROMISE_20268:
- p += sprintf(p, "Ultra100 TX2"); break;
- default:
- p += sprintf(p, "Ultra series"); break;
- break;
- }
- p += sprintf(p, " Chipset.\n");
- return (char *)p;
-}
-
-static int pdcnew_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- int i, len;
+#undef DEBUG
- for (i = 0; i < n_pdc202_devs; i++) {
- struct pci_dev *dev = pdc202_devs[i];
- p = pdcnew_info(buffer, dev);
- }
- /* p - buffer must be less than 4k! */
- len = (p - buffer) - offset;
- *addr = buffer + offset;
-
- return len > count ? count : len;
-}
-#endif /* defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS) */
+#ifdef DEBUG
+#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+static const char *pdc_quirk_drives[] = {
+ "QUANTUM FIREBALLlct08 08",
+ "QUANTUM FIREBALLP KA6.4",
+ "QUANTUM FIREBALLP KA9.1",
+ "QUANTUM FIREBALLP LM20.4",
+ "QUANTUM FIREBALLP KX13.6",
+ "QUANTUM FIREBALLP KX20.5",
+ "QUANTUM FIREBALLP KX27.3",
+ "QUANTUM FIREBALLP LM20.5",
+ NULL
+};
-static u8 pdcnew_ratemask (ide_drive_t *drive)
+static u8 max_dma_rate(struct pci_dev *pdev)
{
u8 mode;
- switch(HWIF(drive)->pci_dev->device) {
+ switch(pdev->device) {
case PCI_DEVICE_ID_PROMISE_20277:
case PCI_DEVICE_ID_PROMISE_20276:
case PCI_DEVICE_ID_PROMISE_20275:
default:
return 0;
}
- if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
+
return mode;
}
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
+static u8 pdcnew_ratemask(ide_drive_t *drive)
+{
+ u8 mode = max_dma_rate(HWIF(drive)->pci_dev);
+
+ if (!eighty_ninty_three(drive))
+ mode = min_t(u8, mode, 1);
+
+ return mode;
+}
+
+static int check_in_drive_lists(ide_drive_t *drive, const char **list)
{
struct hd_driveid *id = drive->id;
return 0;
}
-static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+/**
+ * get_indexed_reg - Get indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
+{
+ u8 value;
+
+ hwif->OUTB(index, hwif->dma_vendor1);
+ value = hwif->INB(hwif->dma_vendor3);
+
+ DBG("index[%02X] value[%02X]\n", index, value);
+ return value;
+}
+
+/**
+ * set_indexed_reg - Set indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
+{
+ hwif->OUTB(index, hwif->dma_vendor1);
+ hwif->OUTB(value, hwif->dma_vendor3);
+ DBG("index[%02X] value[%02X]\n", index, value);
+}
+
+/*
+ * ATA Timing Tables based on 133 MHz PLL output clock.
+ *
+ * If the PLL outputs 100 MHz clock, the ASIC hardware will set
+ * the timing registers automatically when "set features" command is
+ * issued to the device. However, if the PLL output clock is 133 MHz,
+ * the following tables must be used.
+ */
+static struct pio_timing {
+ u8 reg0c, reg0d, reg13;
+} pio_timings [] = {
+ { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */
+ { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */
+ { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */
+ { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
+ { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
+};
+
+static struct mwdma_timing {
+ u8 reg0e, reg0f;
+} mwdma_timings [] = {
+ { 0xdf, 0x5f }, /* MWDMA mode 0 */
+ { 0x6b, 0x27 }, /* MWDMA mode 1 */
+ { 0x69, 0x25 }, /* MWDMA mode 2 */
+};
+
+static struct udma_timing {
+ u8 reg10, reg11, reg12;
+} udma_timings [] = {
+ { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
+ { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
+ { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
+ { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
+ { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
+ { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
+ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
+};
+
+static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned long indexreg = hwif->dma_vendor1;
- unsigned long datareg = hwif->dma_vendor3;
- u8 thold = 0x10;
- u8 adj = (drive->dn%2) ? 0x08 : 0x00;
- u8 speed = ide_rate_filter(pdcnew_ratemask(drive), xferspeed);
-
- if (speed == XFER_UDMA_2) {
- hwif->OUTB((thold + adj), indexreg);
- hwif->OUTB((hwif->INB(datareg) & 0x7f), datareg);
- }
+ u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+ int err;
- switch (speed) {
- case XFER_UDMA_7:
- speed = XFER_UDMA_6;
- case XFER_UDMA_6: set_ultra(0x1a, 0x01, 0xcb); break;
- case XFER_UDMA_5: set_ultra(0x1a, 0x02, 0xcb); break;
- case XFER_UDMA_4: set_ultra(0x1a, 0x03, 0xcd); break;
- case XFER_UDMA_3: set_ultra(0x1a, 0x05, 0xcd); break;
- case XFER_UDMA_2: set_ultra(0x2a, 0x07, 0xcd); break;
- case XFER_UDMA_1: set_ultra(0x3a, 0x0a, 0xd0); break;
- case XFER_UDMA_0: set_ultra(0x4a, 0x0f, 0xd5); break;
- case XFER_MW_DMA_2: set_ata2(0x69, 0x25); break;
- case XFER_MW_DMA_1: set_ata2(0x6b, 0x27); break;
- case XFER_MW_DMA_0: set_ata2(0xdf, 0x5f); break;
- case XFER_PIO_4: set_pio(0x23, 0x09, 0x25); break;
- case XFER_PIO_3: set_pio(0x27, 0x0d, 0x35); break;
- case XFER_PIO_2: set_pio(0x23, 0x26, 0x64); break;
- case XFER_PIO_1: set_pio(0x46, 0x29, 0xa4); break;
- case XFER_PIO_0: set_pio(0xfb, 0x2b, 0xac); break;
- default:
- ;
- }
+ speed = ide_rate_filter(pdcnew_ratemask(drive), speed);
+
+ /*
+ * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
+ * automatically set the timing registers based on 100 MHz PLL output.
+ */
+ err = ide_config_drive_speed(drive, speed);
+
+ /*
+ * As we set up the PLL to output 133 MHz for UltraDMA/133 capable
+ * chips, we must override the default register settings...
+ */
+ if (max_dma_rate(hwif->pci_dev) == 4) {
+ u8 mode = speed & 0x07;
+
+ switch (speed) {
+ case XFER_UDMA_6:
+ case XFER_UDMA_5:
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ set_indexed_reg(hwif, 0x10 + adj,
+ udma_timings[mode].reg10);
+ set_indexed_reg(hwif, 0x11 + adj,
+ udma_timings[mode].reg11);
+ set_indexed_reg(hwif, 0x12 + adj,
+ udma_timings[mode].reg12);
+ break;
+
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ set_indexed_reg(hwif, 0x0e + adj,
+ mwdma_timings[mode].reg0e);
+ set_indexed_reg(hwif, 0x0f + adj,
+ mwdma_timings[mode].reg0f);
+ break;
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ set_indexed_reg(hwif, 0x0c + adj,
+ pio_timings[mode].reg0c);
+ set_indexed_reg(hwif, 0x0d + adj,
+ pio_timings[mode].reg0d);
+ set_indexed_reg(hwif, 0x13 + adj,
+ pio_timings[mode].reg13);
+ break;
+ default:
+ printk(KERN_ERR "pdc202xx_new: "
+ "Unknown speed %d ignored\n", speed);
+ }
+ } else if (speed == XFER_UDMA_2) {
+ /* Set tHOLD bit to 0 if using UDMA mode 2 */
+ u8 tmp = get_indexed_reg(hwif, 0x10 + adj);
+
+ set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
+ }
- return (ide_config_drive_speed(drive, speed));
+ return err;
}
/* 0 1 2 3 4 5 6 7 8
*/
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
- u8 speed;
-
- if (pio == 5) pio = 4;
- speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL);
-
- (void)pdcnew_new_tune_chipset(drive, speed);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
-static u8 pdcnew_new_cable_detect (ide_hwif_t *hwif)
+static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
{
- hwif->OUTB(0x0b, hwif->dma_vendor1);
- return ((u8)((hwif->INB(hwif->dma_vendor3) & 0x04)));
+ return get_indexed_reg(hwif, 0x0b) & 0x04;
}
-static int config_chipset_for_dma (ide_drive_t *drive)
+
+static int config_chipset_for_dma(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
- u8 speed = -1;
- u8 cable;
-
- u8 ultra_66 = ((id->dma_ultra & 0x0010) ||
- (id->dma_ultra & 0x0008)) ? 1 : 0;
-
- cable = pdcnew_new_cable_detect(hwif);
+ u8 ultra_66 = (id->dma_ultra & 0x0078) ? 1 : 0;
+ u8 cable = pdcnew_cable_detect(hwif);
+ u8 speed;
if (ultra_66 && cable) {
- printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
+ printk(KERN_WARNING "Warning: %s channel "
+ "requires an 80-pin cable for operation.\n",
+ hwif->channel ? "Secondary" : "Primary");
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
}
if (drive->media != ide_disk)
return 0;
- if (id->capability & 4) { /* IORDY_EN & PREFETCH_EN */
- hwif->OUTB((0x13 + ((drive->dn%2) ? 0x08 : 0x00)), hwif->dma_vendor1);
- hwif->OUTB((hwif->INB(hwif->dma_vendor3)|0x03), hwif->dma_vendor3);
+
+ if (id->capability & 4) {
+ /*
+ * Set IORDY_EN & PREFETCH_EN (this seems to have
+ * NO real effect since this register is reloaded
+ * by hardware when the transfer mode is selected)
+ */
+ u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00;
+
+ tmp = get_indexed_reg(hwif, 0x13 + adj);
+ set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03);
}
speed = ide_dma_speed(drive, pdcnew_ratemask(drive));
- if (!(speed)) {
- hwif->tuneproc(drive, 5);
+ if (!speed)
return 0;
- }
(void) hwif->speedproc(drive, speed);
return ide_dma_enable(drive);
}
-static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive)
+static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
drive->init_speed = 0;
if (id && (id->capability & 1) && drive->autodma) {
- /* Consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- goto fast_ata_pio;
- if (id->field_valid & 4) {
- if (id->dma_ultra & hwif->ultra_mask) {
- /* Force if Capable UltraDMA */
- int dma = config_chipset_for_dma(drive);
- if ((id->field_valid & 2) && !dma)
- goto try_dma_modes;
- }
- } else if (id->field_valid & 2) {
-try_dma_modes:
- if ((id->dma_mword & hwif->mwdma_mask) ||
- (id->dma_1word & hwif->swdma_mask)) {
- /* Force if Capable regular DMA modes */
- if (!config_chipset_for_dma(drive))
- goto no_dma_set;
- }
- } else if (__ide_dma_good_drive(drive) &&
- (id->eide_dma_time < 150)) {
- goto no_dma_set;
- /* Consult the list of known "good" drives */
- if (!config_chipset_for_dma(drive))
- goto no_dma_set;
- } else {
- goto fast_ata_pio;
+
+ if (ide_use_dma(drive)) {
+ if (config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
}
- return hwif->ide_dma_on(drive);
+
+ goto fast_ata_pio;
+
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
-no_dma_set:
- hwif->tuneproc(drive, 5);
+ hwif->tuneproc(drive, 255);
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
return 0;
}
-static int pdcnew_quirkproc (ide_drive_t *drive)
+static int pdcnew_quirkproc(ide_drive_t *drive)
{
- return ((int) check_in_drive_lists(drive, pdc_quirk_drives));
+ return check_in_drive_lists(drive, pdc_quirk_drives);
}
static int pdcnew_ide_dma_lostirq(ide_drive_t *drive)
return __ide_dma_timeout(drive);
}
-static void pdcnew_new_reset (ide_drive_t *drive)
+static void pdcnew_reset(ide_drive_t *drive)
{
/*
* Deleted this because it is redundant from the caller.
*/
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
+ printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n",
HWIF(drive)->channel ? "Secondary" : "Primary");
}
-static void pdcnew_reset_host (ide_hwif_t *hwif)
+/**
+ * read_counter - Read the byte count registers
+ * @dma_base: for the port address
+ */
+static long __devinit read_counter(u32 dma_base)
{
-// unsigned long high_16 = hwif->dma_base - (8*(hwif->channel));
- unsigned long high_16 = hwif->dma_master;
- u8 udma_speed_flag = hwif->INB(high_16|0x001f);
-
- hwif->OUTB((udma_speed_flag | 0x10), (high_16|0x001f));
- mdelay(100);
- hwif->OUTB((udma_speed_flag & ~0x10), (high_16|0x001f));
- mdelay(2000); /* 2 seconds ?! */
-
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
- hwif->channel ? "Secondary" : "Primary");
+ u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
+ u8 cnt0, cnt1, cnt2, cnt3;
+ long count = 0, last;
+ int retry = 3;
+
+ do {
+ last = count;
+
+ /* Read the current count */
+ outb(0x20, pri_dma_base + 0x01);
+ cnt0 = inb(pri_dma_base + 0x03);
+ outb(0x21, pri_dma_base + 0x01);
+ cnt1 = inb(pri_dma_base + 0x03);
+ outb(0x20, sec_dma_base + 0x01);
+ cnt2 = inb(sec_dma_base + 0x03);
+ outb(0x21, sec_dma_base + 0x01);
+ cnt3 = inb(sec_dma_base + 0x03);
+
+ count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0;
+
+ /*
+ * The 30-bit decrementing counter is read in 4 pieces.
+ * Incorrect value may be read when the most significant bytes
+ * are changing...
+ */
+ } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count));
+
+ DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n",
+ cnt0, cnt1, cnt2, cnt3);
+
+ return count;
}
-void pdcnew_reset (ide_drive_t *drive)
+/**
+ * detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * @dma_base: for the port address
+ * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
+ */
+static long __devinit detect_pll_input_clock(unsigned long dma_base)
{
- ide_hwif_t *hwif = HWIF(drive);
- ide_hwif_t *mate = hwif->mate;
-
- pdcnew_reset_host(hwif);
- pdcnew_reset_host(mate);
-#if 0
+ long start_count, end_count;
+ long pll_input;
+ u8 scr1;
+
+ start_count = read_counter(dma_base);
+
+ /* Start the test mode */
+ outb(0x01, dma_base + 0x01);
+ scr1 = inb(dma_base + 0x03);
+ DBG("scr1[%02X]\n", scr1);
+ outb(scr1 | 0x40, dma_base + 0x03);
+
+ /* Let the counter run for 10 ms. */
+ mdelay(10);
+
+ end_count = read_counter(dma_base);
+
+ /* Stop the test mode */
+ outb(0x01, dma_base + 0x01);
+ scr1 = inb(dma_base + 0x03);
+ DBG("scr1[%02X]\n", scr1);
+ outb(scr1 & ~0x40, dma_base + 0x03);
+
/*
- * FIXME: Have to kick all the drives again :-/
- * What a pain in the ACE!
+ * Calculate the input clock in Hz
+ * (the clock counter is 30 bit wide and counts down)
*/
- if (hwif->present) {
- u16 hunit = 0;
- for (hunit = 0; hunit < MAX_DRIVES; ++hunit) {
- ide_drive_t *hdrive = &hwif->drives[hunit];
- if (hdrive->present) {
- if (hwif->ide_dma_check)
- hwif->ide_dma_check(hdrive);
- else
- hwif->tuneproc(hdrive, 5);
- }
- }
- }
- if (mate->present) {
- u16 munit = 0;
- for (munit = 0; munit < MAX_DRIVES; ++munit) {
- ide_drive_t *mdrive = &mate->drives[munit];
- if (mdrive->present) {
- if (mate->ide_dma_check)
- mate->ide_dma_check(mdrive);
- else
- mate->tuneproc(mdrive, 5);
- }
- }
- }
-#else
- hwif->tuneproc(drive, 5);
-#endif
+ pll_input = ((start_count - end_count) & 0x3ffffff) * 100;
+
+ DBG("start[%ld] end[%ld]\n", start_count, end_count);
+
+ return pll_input;
}
#ifdef CONFIG_PPC_PMAC
{
struct device_node *np = pci_device_to_OF_node(pdev);
unsigned int class_rev = 0;
- unsigned long mmio;
u8 conf;
if (np == NULL || !device_is_compatible(np, "kiwi-root"))
if (class_rev >= 0x03) {
/* Setup chip magic config stuff (from darwin) */
- pci_read_config_byte(pdev, 0x40, &conf);
- pci_write_config_byte(pdev, 0x40, conf | 0x01);
- }
- mmio = (unsigned long)ioremap(pci_resource_start(pdev, 5),
- pci_resource_len(pdev, 5));
-
- /* Setup some PLL stuffs */
- switch (pdev->device) {
- case PCI_DEVICE_ID_PROMISE_20270:
- writew(0x0d2b, mmio + 0x1202);
- mdelay(30);
- break;
- case PCI_DEVICE_ID_PROMISE_20271:
- writew(0x0826, mmio + 0x1202);
- mdelay(30);
- break;
+ pci_read_config_byte (pdev, 0x40, &conf);
+ pci_write_config_byte(pdev, 0x40, (conf | 0x01));
}
-
- iounmap((void *)mmio);
}
#endif /* CONFIG_PPC_PMAC */
-static unsigned int __init init_chipset_pdcnew (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name)
{
+ unsigned long dma_base = pci_resource_start(dev, 4);
+ unsigned long sec_dma_base = dma_base + 0x08;
+ long pll_input, pll_output, ratio;
+ int f, r;
+ u8 pll_ctl0, pll_ctl1;
+
if (dev->resource[PCI_ROM_RESOURCE].start) {
pci_write_config_dword(dev, PCI_ROM_ADDRESS,
dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n",
- name, dev->resource[PCI_ROM_RESOURCE].start);
+ printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
+ (unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
}
#ifdef CONFIG_PPC_PMAC
apple_kiwi_init(dev);
#endif
-#if defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS)
- pdc202_devs[n_pdc202_devs++] = dev;
+ /* Calculate the required PLL output frequency */
+ switch(max_dma_rate(dev)) {
+ case 4: /* it's 133 MHz for Ultra133 chips */
+ pll_output = 133333333;
+ break;
+ case 3: /* and 100 MHz for Ultra100 chips */
+ default:
+ pll_output = 100000000;
+ break;
+ }
- if (!pdcnew_proc) {
- pdcnew_proc = 1;
- ide_pci_create_host_proc("pdcnew", pdcnew_get_info);
+ /*
+ * Detect PLL input clock.
+ * On some systems, where PCI bus is running at non-standard clock rate
+ * (e.g. 25 or 40 MHz), we have to adjust the cycle time.
+ * PDC20268 and newer chips employ PLL circuit to help correct timing
+ * registers setting.
+ */
+ pll_input = detect_pll_input_clock(dma_base);
+ printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000);
+
+ /* Sanity check */
+ if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
+ printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n",
+ name, pll_input);
+ goto out;
+ }
+
+#ifdef DEBUG
+ DBG("pll_output is %ld Hz\n", pll_output);
+
+ /* Show the current clock value of PLL control register
+ * (maybe already configured by the BIOS)
+ */
+ outb(0x02, sec_dma_base + 0x01);
+ pll_ctl0 = inb(sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ pll_ctl1 = inb(sec_dma_base + 0x03);
+
+ DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+ /*
+ * Calculate the ratio of F, R and NO
+ * POUT = (F + 2) / (( R + 2) * NO)
+ */
+ ratio = pll_output / (pll_input / 1000);
+ if (ratio < 8600L) { /* 8.6x */
+ /* Using NO = 0x01, R = 0x0d */
+ r = 0x0d;
+ } else if (ratio < 12900L) { /* 12.9x */
+ /* Using NO = 0x01, R = 0x08 */
+ r = 0x08;
+ } else if (ratio < 16100L) { /* 16.1x */
+ /* Using NO = 0x01, R = 0x06 */
+ r = 0x06;
+ } else if (ratio < 64000L) { /* 64x */
+ r = 0x00;
+ } else {
+ /* Invalid ratio */
+ printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio);
+ goto out;
}
-#endif /* DISPLAY_PDC202XX_TIMINGS && CONFIG_PROC_FS */
+ f = (ratio * (r + 2)) / 1000 - 2;
+
+ DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio);
+
+ if (unlikely(f < 0 || f > 127)) {
+ /* Invalid F */
+ printk(KERN_ERR "%s: F[%d] invalid!\n", name, f);
+ goto out;
+ }
+
+ pll_ctl0 = (u8) f;
+ pll_ctl1 = (u8) r;
+
+ DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+
+ outb(0x02, sec_dma_base + 0x01);
+ outb(pll_ctl0, sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ outb(pll_ctl1, sec_dma_base + 0x03);
+
+ /* Wait the PLL circuit to be stable */
+ mdelay(30);
+
+#ifdef DEBUG
+ /*
+ * Show the current clock value of PLL control register
+ */
+ outb(0x02, sec_dma_base + 0x01);
+ pll_ctl0 = inb(sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ pll_ctl1 = inb(sec_dma_base + 0x03);
+
+ DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+ out:
return dev->irq;
}
-static void __init init_hwif_pdc202new (ide_hwif_t *hwif)
+static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
{
hwif->autodma = 0;
hwif->tuneproc = &pdcnew_tune_drive;
hwif->quirkproc = &pdcnew_quirkproc;
- hwif->speedproc = &pdcnew_new_tune_chipset;
- hwif->resetproc = &pdcnew_new_reset;
+ hwif->speedproc = &pdcnew_tune_chipset;
+ hwif->resetproc = &pdcnew_reset;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
+ hwif->err_stops_fifo = 1;
+
hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate;
hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq;
hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout;
- if (!(hwif->udma_four))
- hwif->udma_four = (pdcnew_new_cable_detect(hwif)) ? 0 : 1;
+
+ if (!hwif->udma_four)
+ hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1;
+
if (!noautodma)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
+
#if PDC202_DEBUG_CABLE
printk(KERN_DEBUG "%s: %s-pin cable\n",
hwif->name, hwif->udma_four ? "80" : "40");
#endif /* PDC202_DEBUG_CABLE */
}
-static void __init init_setup_pdcnew (struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d)
{
- ide_setup_pci_device(dev, d);
+ return ide_setup_pci_device(dev, d);
}
-static void __init init_setup_pdc20270 (struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_pdc20270(struct pci_dev *dev,
+ ide_pci_device_t *d)
{
struct pci_dev *findev = NULL;
+ int ret;
if ((dev->bus->self &&
dev->bus->self->vendor == PCI_VENDOR_ID_DEC) &&
(dev->bus->self->device == PCI_DEVICE_ID_DEC_21150)) {
- if (PCI_SLOT(dev->devfn) & 2) {
- return;
- }
+ if (PCI_SLOT(dev->devfn) & 2)
+ return -ENODEV;
d->extra = 0;
- while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
+ while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
if ((findev->vendor == dev->vendor) &&
(findev->device == dev->device) &&
(PCI_SLOT(findev->devfn) & 2)) {
if (findev->irq != dev->irq) {
findev->irq = dev->irq;
}
- ide_setup_pci_devices(dev, findev, d);
- return;
+ ret = ide_setup_pci_devices(dev, findev, d);
+ pci_dev_put(findev);
+ return ret;
}
}
}
- ide_setup_pci_device(dev, d);
+ return ide_setup_pci_device(dev, d);
}
-static void __init init_setup_pdc20276 (struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_pdc20276(struct pci_dev *dev,
+ ide_pci_device_t *d)
{
if ((dev->bus->self) &&
(dev->bus->self->vendor == PCI_VENDOR_ID_INTEL) &&
(dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960RM))) {
printk(KERN_INFO "ide: Skipping Promise PDC20276 "
"attached to I2O RAID controller.\n");
- return;
+ return -ENODEV;
}
- ide_setup_pci_device(dev, d);
+ return ide_setup_pci_device(dev, d);
}
+static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
+ { /* 0 */
+ .name = "PDC20268",
+ .init_setup = init_setup_pdcnew,
+ .init_chipset = init_chipset_pdcnew,
+ .init_hwif = init_hwif_pdc202new,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 1 */
+ .name = "PDC20269",
+ .init_setup = init_setup_pdcnew,
+ .init_chipset = init_chipset_pdcnew,
+ .init_hwif = init_hwif_pdc202new,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 2 */
+ .name = "PDC20270",
+ .init_setup = init_setup_pdc20270,
+ .init_chipset = init_chipset_pdcnew,
+ .init_hwif = init_hwif_pdc202new,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 3 */
+ .name = "PDC20271",
+ .init_setup = init_setup_pdcnew,
+ .init_chipset = init_chipset_pdcnew,
+ .init_hwif = init_hwif_pdc202new,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 4 */
+ .name = "PDC20275",
+ .init_setup = init_setup_pdcnew,
+ .init_chipset = init_chipset_pdcnew,
+ .init_hwif = init_hwif_pdc202new,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 5 */
+ .name = "PDC20276",
+ .init_setup = init_setup_pdc20276,
+ .init_chipset = init_chipset_pdcnew,
+ .init_hwif = init_hwif_pdc202new,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ },{ /* 6 */
+ .name = "PDC20277",
+ .init_setup = init_setup_pdcnew,
+ .init_chipset = init_chipset_pdcnew,
+ .init_hwif = init_hwif_pdc202new,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD,
+ }
+};
+
/**
* pdc202new_init_one - called when a pdc202xx is found
* @dev: the pdc202new device
{
ide_pci_device_t *d = &pdcnew_chipsets[id->driver_data];
- if (dev->device != d->device)
- BUG();
- d->init_setup(dev, d);
- return 0;
+ return d->init_setup(dev, d);
}
static struct pci_device_id pdc202new_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);
static struct pci_driver driver = {
- .name = "Promise IDE",
+ .name = "Promise_IDE",
.id_table = pdc202new_pci_tbl,
.probe = pdc202new_init_one,
};
-static int pdc202new_ide_init(void)
+static int __init pdc202new_ide_init(void)
{
return ide_pci_register_driver(&driver);
}