#include <asm/io.h>
-#include "piix.h"
-
static int no_piix_dma;
-#if defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 piix_proc = 0;
-#define PIIX_MAX_DEVS 5
-static struct pci_dev *piix_devs[PIIX_MAX_DEVS];
-static int n_piix_devs;
-
-/**
- * piix_get_info - fill in /proc for PIIX ide
- * @buffer: buffer to fill
- * @addr: address of user start in buffer
- * @offset: offset into 'file'
- * @count: buffer count
- *
- * Walks the PIIX devices and outputs summary data on the tuning and
- * anything else that will help with debugging
- */
-
-static int piix_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- int i;
-
- for (i = 0; i < n_piix_devs; i++) {
- struct pci_dev *dev = piix_devs[i];
- unsigned long bibma = pci_resource_start(dev, 4);
- u16 reg40 = 0, psitre = 0, reg42 = 0, ssitre = 0;
- u8 c0 = 0, c1 = 0, reg54 = 0, reg55 = 0;
- u8 reg44 = 0, reg48 = 0, reg4a = 0, reg4b = 0;
-
- p += sprintf(p, "\nController: %d\n", i);
- p += sprintf(p, "\n Intel ");
- switch(dev->device) {
- case PCI_DEVICE_ID_INTEL_82801EB_1:
- p += sprintf(p, "PIIX4 SATA 150 ");
- break;
- case PCI_DEVICE_ID_INTEL_82801BA_8:
- case PCI_DEVICE_ID_INTEL_82801BA_9:
- case PCI_DEVICE_ID_INTEL_82801CA_10:
- case PCI_DEVICE_ID_INTEL_82801CA_11:
- case PCI_DEVICE_ID_INTEL_82801DB_10:
- case PCI_DEVICE_ID_INTEL_82801DB_11:
- case PCI_DEVICE_ID_INTEL_82801EB_11:
- case PCI_DEVICE_ID_INTEL_82801E_11:
- case PCI_DEVICE_ID_INTEL_ESB_2:
- case PCI_DEVICE_ID_INTEL_ICH6_19:
- p += sprintf(p, "PIIX4 Ultra 100 ");
- break;
- case PCI_DEVICE_ID_INTEL_82372FB_1:
- case PCI_DEVICE_ID_INTEL_82801AA_1:
- p += sprintf(p, "PIIX4 Ultra 66 ");
- break;
- case PCI_DEVICE_ID_INTEL_82451NX:
- case PCI_DEVICE_ID_INTEL_82801AB_1:
- case PCI_DEVICE_ID_INTEL_82443MX_1:
- case PCI_DEVICE_ID_INTEL_82371AB:
- p += sprintf(p, "PIIX4 Ultra 33 ");
- break;
- case PCI_DEVICE_ID_INTEL_82371SB_1:
- p += sprintf(p, "PIIX3 ");
- break;
- case PCI_DEVICE_ID_INTEL_82371MX:
- p += sprintf(p, "MPIIX ");
- break;
- case PCI_DEVICE_ID_INTEL_82371FB_1:
- case PCI_DEVICE_ID_INTEL_82371FB_0:
- default:
- p += sprintf(p, "PIIX ");
- break;
- }
- p += sprintf(p, "Chipset.\n");
-
- if (dev->device == PCI_DEVICE_ID_INTEL_82371MX)
- continue;
-
- pci_read_config_word(dev, 0x40, ®40);
- pci_read_config_word(dev, 0x42, ®42);
- pci_read_config_byte(dev, 0x44, ®44);
- pci_read_config_byte(dev, 0x48, ®48);
- pci_read_config_byte(dev, 0x4a, ®4a);
- pci_read_config_byte(dev, 0x4b, ®4b);
- pci_read_config_byte(dev, 0x54, ®54);
- pci_read_config_byte(dev, 0x55, ®55);
-
- psitre = (reg40 & 0x4000) ? 1 : 0;
- ssitre = (reg42 & 0x4000) ? 1 : 0;
-
- /*
- * at that point bibma+0x2 et bibma+0xa are byte registers
- * to investigate:
- */
- c0 = inb(bibma + 0x02);
- c1 = inb(bibma + 0x0a);
-
- p += sprintf(p, "--------------- Primary Channel "
- "---------------- Secondary Channel "
- "-------------\n");
- p += sprintf(p, " %sabled "
- " %sabled\n",
- (c0&0x80) ? "dis" : " en",
- (c1&0x80) ? "dis" : " en");
- p += sprintf(p, "--------------- drive0 --------- drive1 "
- "-------- drive0 ---------- drive1 ------\n");
- p += sprintf(p, "DMA enabled: %s %s "
- " %s %s\n",
- (c0&0x20) ? "yes" : "no ",
- (c0&0x40) ? "yes" : "no ",
- (c1&0x20) ? "yes" : "no ",
- (c1&0x40) ? "yes" : "no " );
- p += sprintf(p, "UDMA enabled: %s %s "
- " %s %s\n",
- (reg48&0x01) ? "yes" : "no ",
- (reg48&0x02) ? "yes" : "no ",
- (reg48&0x04) ? "yes" : "no ",
- (reg48&0x08) ? "yes" : "no " );
- p += sprintf(p, "UDMA enabled: %s %s "
- " %s %s\n",
- ((reg54&0x11) &&
- (reg55&0x10) && (reg4a&0x01)) ? "5" :
- ((reg54&0x11) && (reg4a&0x02)) ? "4" :
- ((reg54&0x11) && (reg4a&0x01)) ? "3" :
- (reg4a&0x02) ? "2" :
- (reg4a&0x01) ? "1" :
- (reg4a&0x00) ? "0" : "X",
- ((reg54&0x22) &&
- (reg55&0x20) && (reg4a&0x10)) ? "5" :
- ((reg54&0x22) && (reg4a&0x20)) ? "4" :
- ((reg54&0x22) && (reg4a&0x10)) ? "3" :
- (reg4a&0x20) ? "2" :
- (reg4a&0x10) ? "1" :
- (reg4a&0x00) ? "0" : "X",
- ((reg54&0x44) &&
- (reg55&0x40) && (reg4b&0x03)) ? "5" :
- ((reg54&0x44) && (reg4b&0x02)) ? "4" :
- ((reg54&0x44) && (reg4b&0x01)) ? "3" :
- (reg4b&0x02) ? "2" :
- (reg4b&0x01) ? "1" :
- (reg4b&0x00) ? "0" : "X",
- ((reg54&0x88) &&
- (reg55&0x80) && (reg4b&0x30)) ? "5" :
- ((reg54&0x88) && (reg4b&0x20)) ? "4" :
- ((reg54&0x88) && (reg4b&0x10)) ? "3" :
- (reg4b&0x20) ? "2" :
- (reg4b&0x10) ? "1" :
- (reg4b&0x00) ? "0" : "X");
-
- p += sprintf(p, "UDMA\n");
- p += sprintf(p, "DMA\n");
- p += sprintf(p, "PIO\n");
-
- /*
- * FIXME.... Add configuration junk data....blah blah......
- */
- }
- return p-buffer; /* => must be less than 4k! */
-}
-#endif /* defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS) */
/**
* piix_ratemask - compute rate mask for PIIX IDE
case PCI_DEVICE_ID_INTEL_82801CA_10:
case PCI_DEVICE_ID_INTEL_82801CA_11:
case PCI_DEVICE_ID_INTEL_82801E_11:
+ case PCI_DEVICE_ID_INTEL_82801DB_1:
case PCI_DEVICE_ID_INTEL_82801DB_10:
case PCI_DEVICE_ID_INTEL_82801DB_11:
case PCI_DEVICE_ID_INTEL_82801EB_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
case PCI_DEVICE_ID_INTEL_ICH6_19:
+ case PCI_DEVICE_ID_INTEL_ICH7_21:
+ case PCI_DEVICE_ID_INTEL_ESB2_18:
+ case PCI_DEVICE_ID_INTEL_ICH8_6:
mode = 3;
break;
/* UDMA 66 capable */
}
}
+static spinlock_t tune_lock = SPIN_LOCK_UNLOCKED;
+
/**
* piix_tune_drive - tune a drive attached to a PIIX
* @drive: drive to tune
{ 2, 3 }, };
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
- spin_lock_irqsave(&ide_lock, flags);
+
+ /* Master v slave is synchronized above us but the slave register is
+ shared by the two hwifs so the corner case of two slave timeouts in
+ parallel must be locked */
+
+ spin_lock_irqsave(&tune_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
if (is_slave) {
master_data = master_data | 0x4000;
pci_write_config_word(dev, master_port, master_data);
if (is_slave)
pci_write_config_byte(dev, slave_port, slave_data);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&tune_lock, flags);
}
/**
if ((id->capability & 1) && drive->autodma) {
- /* Consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- goto fast_ata_pio;
-
- /**
- * Try to turn DMA on if:
- * - UDMA or EIDE modes are supported or
- * - drive is a known "good" drive
- *
- * Checks for best mode supported are down later by
- * piix_config_drive_for_dma() -> ide_dma_speed()
- */
- if ((id->field_valid & (4 | 2)) ||
- (__ide_dma_good_drive(drive) && id->eide_dma_time < 150)) {
+ if (ide_use_dma(drive)) {
if (piix_config_drive_for_dma(drive))
return hwif->ide_dma_on(drive);
}
- /* For some reason DMA wasn't turned on, so try PIO. */
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
case PCI_DEVICE_ID_INTEL_82801BA_9:
case PCI_DEVICE_ID_INTEL_82801CA_10:
case PCI_DEVICE_ID_INTEL_82801CA_11:
+ case PCI_DEVICE_ID_INTEL_82801DB_1:
case PCI_DEVICE_ID_INTEL_82801DB_10:
case PCI_DEVICE_ID_INTEL_82801DB_11:
case PCI_DEVICE_ID_INTEL_82801EB_11:
case PCI_DEVICE_ID_INTEL_82801E_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
case PCI_DEVICE_ID_INTEL_ICH6_19:
+ case PCI_DEVICE_ID_INTEL_ICH7_21:
+ case PCI_DEVICE_ID_INTEL_ESB2_18:
+ case PCI_DEVICE_ID_INTEL_ICH8_6:
{
unsigned int extra = 0;
pci_read_config_dword(dev, 0x54, &extra);
break;
}
-#if defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS)
- piix_devs[n_piix_devs++] = dev;
-
- if (!piix_proc) {
- piix_proc = 1;
- ide_pci_create_host_proc("piix", piix_get_info);
- }
-#endif /* DISPLAY_PIIX_TIMINGS && CONFIG_PROC_FS */
return 0;
}
hwif->drives[0].autodma = hwif->autodma;
}
-/**
- * init_setup_piix - callback for IDE initialize
- * @dev: PIIX PCI device
- * @d: IDE pci info
- *
- * Enable the xp fixup for the PIIX controller and then perform
- * a standard ide PCI setup
- */
+#define DECLARE_PIIX_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_chipset = init_chipset_piix, \
+ .init_hwif = init_hwif_piix, \
+ .channels = 2, \
+ .autodma = AUTODMA, \
+ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
+ .bootable = ON_BOARD, \
+ }
-static void __devinit init_setup_piix(struct pci_dev *dev, ide_pci_device_t *d)
-{
- ide_setup_pci_device(dev, d);
-}
+static ide_pci_device_t piix_pci_info[] __devinitdata = {
+ /* 0 */ DECLARE_PIIX_DEV("PIIXa"),
+ /* 1 */ DECLARE_PIIX_DEV("PIIXb"),
+
+ { /* 2 */
+ .name = "MPIIX",
+ .init_hwif = init_hwif_piix,
+ .channels = 2,
+ .autodma = NODMA,
+ .enablebits = {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}},
+ .bootable = ON_BOARD,
+ },
+
+ /* 3 */ DECLARE_PIIX_DEV("PIIX3"),
+ /* 4 */ DECLARE_PIIX_DEV("PIIX4"),
+ /* 5 */ DECLARE_PIIX_DEV("ICH0"),
+ /* 6 */ DECLARE_PIIX_DEV("PIIX4"),
+ /* 7 */ DECLARE_PIIX_DEV("ICH"),
+ /* 8 */ DECLARE_PIIX_DEV("PIIX4"),
+ /* 9 */ DECLARE_PIIX_DEV("PIIX4"),
+ /* 10 */ DECLARE_PIIX_DEV("ICH2"),
+ /* 11 */ DECLARE_PIIX_DEV("ICH2M"),
+ /* 12 */ DECLARE_PIIX_DEV("ICH3M"),
+ /* 13 */ DECLARE_PIIX_DEV("ICH3"),
+ /* 14 */ DECLARE_PIIX_DEV("ICH4"),
+ /* 15 */ DECLARE_PIIX_DEV("ICH5"),
+ /* 16 */ DECLARE_PIIX_DEV("C-ICH"),
+ /* 17 */ DECLARE_PIIX_DEV("ICH4"),
+ /* 18 */ DECLARE_PIIX_DEV("ICH5-SATA"),
+ /* 19 */ DECLARE_PIIX_DEV("ICH5"),
+ /* 20 */ DECLARE_PIIX_DEV("ICH6"),
+ /* 21 */ DECLARE_PIIX_DEV("ICH7"),
+ /* 22 */ DECLARE_PIIX_DEV("ICH4"),
+ /* 23 */ DECLARE_PIIX_DEV("ESB2"),
+ /* 24 */ DECLARE_PIIX_DEV("ICH8M"),
+};
/**
* piix_init_one - called when a PIIX is found
{
ide_pci_device_t *d = &piix_pci_info[id->driver_data];
- d->init_setup(dev, d);
- return 0;
+ return ide_setup_pci_device(dev, d);
}
/**
#endif
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_19, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 23},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 24},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);