fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / ieee1394 / pcilynx.c

diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index bdb3a85..fbb7f14 100644 (file)
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -30,7 +30,6 @@
  *        Enhancements in async and iso send code
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
@@ -76,7 +75,7 @@
 
 
 /* Module Parameters */
-static int skip_eeprom = 0;
+static int skip_eeprom;
 module_param(skip_eeprom, int, 0444);
 MODULE_PARM_DESC(skip_eeprom, "Use generic bus info block instead of serial eeprom (default = 0).");
 
@@ -138,7 +137,6 @@ static struct i2c_algo_bit_data bit_data = {
        .getsda                 = bit_getsda,
        .getscl                 = bit_getscl,
        .udelay                 = 5,
-       .mdelay                 = 5,
        .timeout                = 100,
 };
 
@@ -841,8 +839,7 @@ static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
  ********************************************************/
 
 
-static irqreturn_t lynx_irq_handler(int irq, void *dev_id,
-                             struct pt_regs *regs_are_unused)
+static irqreturn_t lynx_irq_handler(int irq, void *dev_id)
 {
         struct ti_lynx *lynx = (struct ti_lynx *)dev_id;
         struct hpsb_host *host = lynx->host;
@@ -1252,13 +1249,9 @@ static int __devinit add_card(struct pci_dev *dev,
         /* Fix buggy cards with autoboot pin not tied low: */
         reg_write(lynx, DMA0_CHAN_CTRL, 0);
 
-#ifndef __sparc__
        sprintf (irq_buf, "%d", dev->irq);
-#else
-       sprintf (irq_buf, "%s", __irq_itoa(dev->irq));
-#endif
 
-        if (!request_irq(dev->irq, lynx_irq_handler, SA_SHIRQ,
+        if (!request_irq(dev->irq, lynx_irq_handler, IRQF_SHARED,
                          PCILYNX_DRIVER_NAME, lynx)) {
                 PRINT(KERN_INFO, lynx->id, "allocated interrupt %s", irq_buf);
                 lynx->state = have_intr;
@@ -1422,7 +1415,7 @@ static int __devinit add_card(struct pci_dev *dev,
                i = get_phy_reg(lynx, 4);
                i |= PHY_04_LCTRL;
                if (hpsb_disable_irm)
-                       i &= !PHY_04_CONTENDER;
+                       i &= ~PHY_04_CONTENDER;
                else
                        i |= PHY_04_CONTENDER;
                if (i != -1) set_phy_reg(lynx, 4, i);
@@ -1435,10 +1428,9 @@ static int __devinit add_card(struct pci_dev *dev,
                struct i2c_algo_bit_data i2c_adapter_data;
 
                error = -ENOMEM;
-               i2c_ad = kmalloc(sizeof(struct i2c_adapter), SLAB_KERNEL);
+               i2c_ad = kmemdup(&bit_ops, sizeof(*i2c_ad), GFP_KERNEL);
                if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
 
-               memcpy(i2c_ad, &bit_ops, sizeof(struct i2c_adapter));
                 i2c_adapter_data = bit_data;
                 i2c_ad->algo_data = &i2c_adapter_data;
                 i2c_adapter_data.data = lynx;
@@ -1464,26 +1456,6 @@ static int __devinit add_card(struct pci_dev *dev,
                                                   { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
                                                 };
 
-
-#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
-                        union i2c_smbus_data data;
-
-                        if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE,NULL))
-                                PRINT(KERN_ERR, lynx->id,"eeprom read start has failed");
-                        else
-                        {
-                                u16 addr;
-                                for (addr=0x00; addr < 0x100; addr++) {
-                                        if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE,& data)) {
-                                                PRINT(KERN_ERR, lynx->id, "unable to read i2c %x", addr);
-                                                break;
-                                        }
-                                        else
-                                                PRINT(KERN_DEBUG, lynx->id,"got serial eeprom data at %x: %x",addr, data.byte);
-                                }
-                        }
-#endif
-
                         /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we
                            do it more efficiently in one transaction rather then using several reads */
                         if (i2c_transfer(i2c_ad, msg, 2) < 0) {
@@ -1513,7 +1485,7 @@ static int __devinit add_card(struct pci_dev *dev,
 
                         }
 
-                        i2c_bit_del_bus(i2c_ad);
+                       i2c_del_adapter(i2c_ad);
                        kfree(i2c_ad);
                 }
         }