--- /dev/null
+/*
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "ipath_verbs.h"
+
+/*
+ * Convert the AETH RNR timeout code into the number of milliseconds.
+ */
+const u32 ib_ipath_rnr_table[32] = {
+ 656, /* 0 */
+ 1, /* 1 */
+ 1, /* 2 */
+ 1, /* 3 */
+ 1, /* 4 */
+ 1, /* 5 */
+ 1, /* 6 */
+ 1, /* 7 */
+ 1, /* 8 */
+ 1, /* 9 */
+ 1, /* A */
+ 1, /* B */
+ 1, /* C */
+ 1, /* D */
+ 2, /* E */
+ 2, /* F */
+ 3, /* 10 */
+ 4, /* 11 */
+ 6, /* 12 */
+ 8, /* 13 */
+ 11, /* 14 */
+ 16, /* 15 */
+ 21, /* 16 */
+ 31, /* 17 */
+ 41, /* 18 */
+ 62, /* 19 */
+ 82, /* 1A */
+ 123, /* 1B */
+ 164, /* 1C */
+ 246, /* 1D */
+ 328, /* 1E */
+ 492 /* 1F */
+};
+
+/**
+ * ipath_insert_rnr_queue - put QP on the RNR timeout list for the device
+ * @qp: the QP
+ *
+ * XXX Use a simple list for now. We might need a priority
+ * queue if we have lots of QPs waiting for RNR timeouts
+ * but that should be rare.
+ */
+void ipath_insert_rnr_queue(struct ipath_qp *qp)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ if (list_empty(&dev->rnrwait))
+ list_add(&qp->timerwait, &dev->rnrwait);
+ else {
+ struct list_head *l = &dev->rnrwait;
+ struct ipath_qp *nqp = list_entry(l->next, struct ipath_qp,
+ timerwait);
+
+ while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) {
+ qp->s_rnr_timeout -= nqp->s_rnr_timeout;
+ l = l->next;
+ if (l->next == &dev->rnrwait)
+ break;
+ nqp = list_entry(l->next, struct ipath_qp,
+ timerwait);
+ }
+ list_add(&qp->timerwait, l);
+ }
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+}
+
+/**
+ * ipath_get_rwqe - copy the next RWQE into the QP's RWQE
+ * @qp: the QP
+ * @wr_id_only: update wr_id only, not SGEs
+ *
+ * Return 0 if no RWQE is available, otherwise return 1.
+ *
+ * Called at interrupt level with the QP r_rq.lock held.
+ */
+int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
+{
+ struct ipath_rq *rq;
+ struct ipath_srq *srq;
+ struct ipath_rwqe *wqe;
+ int ret;
+
+ if (!qp->ibqp.srq) {
+ rq = &qp->r_rq;
+ if (unlikely(rq->tail == rq->head)) {
+ ret = 0;
+ goto bail;
+ }
+ wqe = get_rwqe_ptr(rq, rq->tail);
+ qp->r_wr_id = wqe->wr_id;
+ if (!wr_id_only) {
+ qp->r_sge.sge = wqe->sg_list[0];
+ qp->r_sge.sg_list = wqe->sg_list + 1;
+ qp->r_sge.num_sge = wqe->num_sge;
+ qp->r_len = wqe->length;
+ }
+ if (++rq->tail >= rq->size)
+ rq->tail = 0;
+ ret = 1;
+ goto bail;
+ }
+
+ srq = to_isrq(qp->ibqp.srq);
+ rq = &srq->rq;
+ spin_lock(&rq->lock);
+ if (unlikely(rq->tail == rq->head)) {
+ spin_unlock(&rq->lock);
+ ret = 0;
+ goto bail;
+ }
+ wqe = get_rwqe_ptr(rq, rq->tail);
+ qp->r_wr_id = wqe->wr_id;
+ if (!wr_id_only) {
+ qp->r_sge.sge = wqe->sg_list[0];
+ qp->r_sge.sg_list = wqe->sg_list + 1;
+ qp->r_sge.num_sge = wqe->num_sge;
+ qp->r_len = wqe->length;
+ }
+ if (++rq->tail >= rq->size)
+ rq->tail = 0;
+ if (srq->ibsrq.event_handler) {
+ struct ib_event ev;
+ u32 n;
+
+ if (rq->head < rq->tail)
+ n = rq->size + rq->head - rq->tail;
+ else
+ n = rq->head - rq->tail;
+ if (n < srq->limit) {
+ srq->limit = 0;
+ spin_unlock(&rq->lock);
+ ev.device = qp->ibqp.device;
+ ev.element.srq = qp->ibqp.srq;
+ ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
+ srq->ibsrq.event_handler(&ev,
+ srq->ibsrq.srq_context);
+ } else
+ spin_unlock(&rq->lock);
+ } else
+ spin_unlock(&rq->lock);
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_ruc_loopback - handle UC and RC lookback requests
+ * @sqp: the loopback QP
+ * @wc: the work completion entry
+ *
+ * This is called from ipath_do_uc_send() or ipath_do_rc_send() to
+ * forward a WQE addressed to the same HCA.
+ * Note that although we are single threaded due to the tasklet, we still
+ * have to protect against post_send(). We don't have to worry about
+ * receive interrupts since this is a connected protocol and all packets
+ * will pass through here.
+ */
+void ipath_ruc_loopback(struct ipath_qp *sqp, struct ib_wc *wc)
+{
+ struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
+ struct ipath_qp *qp;
+ struct ipath_swqe *wqe;
+ struct ipath_sge *sge;
+ unsigned long flags;
+ u64 sdata;
+
+ qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
+ if (!qp) {
+ dev->n_pkt_drops++;
+ return;
+ }
+
+again:
+ spin_lock_irqsave(&sqp->s_lock, flags);
+
+ if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_SEND_OK)) {
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+ goto done;
+ }
+
+ /* Get the next send request. */
+ if (sqp->s_last == sqp->s_head) {
+ /* Send work queue is empty. */
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+ goto done;
+ }
+
+ /*
+ * We can rely on the entry not changing without the s_lock
+ * being held until we update s_last.
+ */
+ wqe = get_swqe_ptr(sqp, sqp->s_last);
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+
+ wc->wc_flags = 0;
+ wc->imm_data = 0;
+
+ sqp->s_sge.sge = wqe->sg_list[0];
+ sqp->s_sge.sg_list = wqe->sg_list + 1;
+ sqp->s_sge.num_sge = wqe->wr.num_sge;
+ sqp->s_len = wqe->length;
+ switch (wqe->wr.opcode) {
+ case IB_WR_SEND_WITH_IMM:
+ wc->wc_flags = IB_WC_WITH_IMM;
+ wc->imm_data = wqe->wr.imm_data;
+ /* FALLTHROUGH */
+ case IB_WR_SEND:
+ spin_lock_irqsave(&qp->r_rq.lock, flags);
+ if (!ipath_get_rwqe(qp, 0)) {
+ rnr_nak:
+ spin_unlock_irqrestore(&qp->r_rq.lock, flags);
+ /* Handle RNR NAK */
+ if (qp->ibqp.qp_type == IB_QPT_UC)
+ goto send_comp;
+ if (sqp->s_rnr_retry == 0) {
+ wc->status = IB_WC_RNR_RETRY_EXC_ERR;
+ goto err;
+ }
+ if (sqp->s_rnr_retry_cnt < 7)
+ sqp->s_rnr_retry--;
+ dev->n_rnr_naks++;
+ sqp->s_rnr_timeout =
+ ib_ipath_rnr_table[sqp->s_min_rnr_timer];
+ ipath_insert_rnr_queue(sqp);
+ goto done;
+ }
+ spin_unlock_irqrestore(&qp->r_rq.lock, flags);
+ break;
+
+ case IB_WR_RDMA_WRITE_WITH_IMM:
+ wc->wc_flags = IB_WC_WITH_IMM;
+ wc->imm_data = wqe->wr.imm_data;
+ spin_lock_irqsave(&qp->r_rq.lock, flags);
+ if (!ipath_get_rwqe(qp, 1))
+ goto rnr_nak;
+ spin_unlock_irqrestore(&qp->r_rq.lock, flags);
+ /* FALLTHROUGH */
+ case IB_WR_RDMA_WRITE:
+ if (wqe->length == 0)
+ break;
+ if (unlikely(!ipath_rkey_ok(dev, &qp->r_sge, wqe->length,
+ wqe->wr.wr.rdma.remote_addr,
+ wqe->wr.wr.rdma.rkey,
+ IB_ACCESS_REMOTE_WRITE))) {
+ acc_err:
+ wc->status = IB_WC_REM_ACCESS_ERR;
+ err:
+ wc->wr_id = wqe->wr.wr_id;
+ wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+ wc->vendor_err = 0;
+ wc->byte_len = 0;
+ wc->qp_num = sqp->ibqp.qp_num;
+ wc->src_qp = sqp->remote_qpn;
+ wc->pkey_index = 0;
+ wc->slid = sqp->remote_ah_attr.dlid;
+ wc->sl = sqp->remote_ah_attr.sl;
+ wc->dlid_path_bits = 0;
+ wc->port_num = 0;
+ ipath_sqerror_qp(sqp, wc);
+ goto done;
+ }
+ break;
+
+ case IB_WR_RDMA_READ:
+ if (unlikely(!ipath_rkey_ok(dev, &sqp->s_sge, wqe->length,
+ wqe->wr.wr.rdma.remote_addr,
+ wqe->wr.wr.rdma.rkey,
+ IB_ACCESS_REMOTE_READ)))
+ goto acc_err;
+ if (unlikely(!(qp->qp_access_flags &
+ IB_ACCESS_REMOTE_READ)))
+ goto acc_err;
+ qp->r_sge.sge = wqe->sg_list[0];
+ qp->r_sge.sg_list = wqe->sg_list + 1;
+ qp->r_sge.num_sge = wqe->wr.num_sge;
+ break;
+
+ case IB_WR_ATOMIC_CMP_AND_SWP:
+ case IB_WR_ATOMIC_FETCH_AND_ADD:
+ if (unlikely(!ipath_rkey_ok(dev, &qp->r_sge, sizeof(u64),
+ wqe->wr.wr.rdma.remote_addr,
+ wqe->wr.wr.rdma.rkey,
+ IB_ACCESS_REMOTE_ATOMIC)))
+ goto acc_err;
+ /* Perform atomic OP and save result. */
+ sdata = wqe->wr.wr.atomic.swap;
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ qp->r_atomic_data = *(u64 *) qp->r_sge.sge.vaddr;
+ if (wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
+ *(u64 *) qp->r_sge.sge.vaddr =
+ qp->r_atomic_data + sdata;
+ else if (qp->r_atomic_data == wqe->wr.wr.atomic.compare_add)
+ *(u64 *) qp->r_sge.sge.vaddr = sdata;
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+ *(u64 *) sqp->s_sge.sge.vaddr = qp->r_atomic_data;
+ goto send_comp;
+
+ default:
+ goto done;
+ }
+
+ sge = &sqp->s_sge.sge;
+ while (sqp->s_len) {
+ u32 len = sqp->s_len;
+
+ if (len > sge->length)
+ len = sge->length;
+ BUG_ON(len == 0);
+ ipath_copy_sge(&qp->r_sge, sge->vaddr, len);
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--sqp->s_sge.num_sge)
+ *sge = *sqp->s_sge.sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+ sqp->s_len -= len;
+ }
+
+ if (wqe->wr.opcode == IB_WR_RDMA_WRITE ||
+ wqe->wr.opcode == IB_WR_RDMA_READ)
+ goto send_comp;
+
+ if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
+ wc->opcode = IB_WC_RECV_RDMA_WITH_IMM;
+ else
+ wc->opcode = IB_WC_RECV;
+ wc->wr_id = qp->r_wr_id;
+ wc->status = IB_WC_SUCCESS;
+ wc->vendor_err = 0;
+ wc->byte_len = wqe->length;
+ wc->qp_num = qp->ibqp.qp_num;
+ wc->src_qp = qp->remote_qpn;
+ /* XXX do we know which pkey matched? Only needed for GSI. */
+ wc->pkey_index = 0;
+ wc->slid = qp->remote_ah_attr.dlid;
+ wc->sl = qp->remote_ah_attr.sl;
+ wc->dlid_path_bits = 0;
+ /* Signal completion event if the solicited bit is set. */
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), wc,
+ wqe->wr.send_flags & IB_SEND_SOLICITED);
+
+send_comp:
+ sqp->s_rnr_retry = sqp->s_rnr_retry_cnt;
+
+ if (!test_bit(IPATH_S_SIGNAL_REQ_WR, &sqp->s_flags) ||
+ (wqe->wr.send_flags & IB_SEND_SIGNALED)) {
+ wc->wr_id = wqe->wr.wr_id;
+ wc->status = IB_WC_SUCCESS;
+ wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+ wc->vendor_err = 0;
+ wc->byte_len = wqe->length;
+ wc->qp_num = sqp->ibqp.qp_num;
+ wc->src_qp = 0;
+ wc->pkey_index = 0;
+ wc->slid = 0;
+ wc->sl = 0;
+ wc->dlid_path_bits = 0;
+ wc->port_num = 0;
+ ipath_cq_enter(to_icq(sqp->ibqp.send_cq), wc, 0);
+ }
+
+ /* Update s_last now that we are finished with the SWQE */
+ spin_lock_irqsave(&sqp->s_lock, flags);
+ if (++sqp->s_last >= sqp->s_size)
+ sqp->s_last = 0;
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+ goto again;
+
+done:
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+}
+
+/**
+ * ipath_no_bufs_available - tell the layer driver we need buffers
+ * @qp: the QP that caused the problem
+ * @dev: the device we ran out of buffers on
+ *
+ * Called when we run out of PIO buffers.
+ */
+void ipath_no_bufs_available(struct ipath_qp *qp, struct ipath_ibdev *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ if (list_empty(&qp->piowait))
+ list_add_tail(&qp->piowait, &dev->piowait);
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+ /*
+ * Note that as soon as ipath_layer_want_buffer() is called and
+ * possibly before it returns, ipath_ib_piobufavail()
+ * could be called. If we are still in the tasklet function,
+ * tasklet_hi_schedule() will not call us until the next time
+ * tasklet_hi_schedule() is called.
+ * We clear the tasklet flag now since we are committing to return
+ * from the tasklet function.
+ */
+ clear_bit(IPATH_S_BUSY, &qp->s_flags);
+ tasklet_unlock(&qp->s_task);
+ ipath_layer_want_buffer(dev->dd);
+ dev->n_piowait++;
+}
+
+/**
+ * ipath_post_rc_send - post RC and UC sends
+ * @qp: the QP to post on
+ * @wr: the work request to send
+ */
+int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
+{
+ struct ipath_swqe *wqe;
+ unsigned long flags;
+ u32 next;
+ int i, j;
+ int acc;
+ int ret;
+
+ /*
+ * Don't allow RDMA reads or atomic operations on UC or
+ * undefined operations.
+ * Make sure buffer is large enough to hold the result for atomics.
+ */
+ if (qp->ibqp.qp_type == IB_QPT_UC) {
+ if ((unsigned) wr->opcode >= IB_WR_RDMA_READ) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ } else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD) {
+ ret = -EINVAL;
+ goto bail;
+ } else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP &&
+ (wr->num_sge == 0 ||
+ wr->sg_list[0].length < sizeof(u64) ||
+ wr->sg_list[0].addr & (sizeof(u64) - 1))) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ /* IB spec says that num_sge == 0 is OK. */
+ if (wr->num_sge > qp->s_max_sge) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+ spin_lock_irqsave(&qp->s_lock, flags);
+ next = qp->s_head + 1;
+ if (next >= qp->s_size)
+ next = 0;
+ if (next == qp->s_last) {
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ wqe = get_swqe_ptr(qp, qp->s_head);
+ wqe->wr = *wr;
+ wqe->ssn = qp->s_ssn++;
+ wqe->sg_list[0].mr = NULL;
+ wqe->sg_list[0].vaddr = NULL;
+ wqe->sg_list[0].length = 0;
+ wqe->sg_list[0].sge_length = 0;
+ wqe->length = 0;
+ acc = wr->opcode >= IB_WR_RDMA_READ ? IB_ACCESS_LOCAL_WRITE : 0;
+ for (i = 0, j = 0; i < wr->num_sge; i++) {
+ if (to_ipd(qp->ibqp.pd)->user && wr->sg_list[i].lkey == 0) {
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (wr->sg_list[i].length == 0)
+ continue;
+ if (!ipath_lkey_ok(&to_idev(qp->ibqp.device)->lk_table,
+ &wqe->sg_list[j], &wr->sg_list[i],
+ acc)) {
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ ret = -EINVAL;
+ goto bail;
+ }
+ wqe->length += wr->sg_list[i].length;
+ j++;
+ }
+ wqe->wr.num_sge = j;
+ qp->s_head = next;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ if (qp->ibqp.qp_type == IB_QPT_UC)
+ ipath_do_uc_send((unsigned long) qp);
+ else
+ ipath_do_rc_send((unsigned long) qp);
+
+ ret = 0;
+
+bail:
+ return ret;
+}
git://git.onelab.eu / linux-2.6.git / blobdiff