/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
+ * the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
+ *
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
#include <linux/interrupt.h>
#include <linux/serio.h>
#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
MODULE_DESCRIPTION("82C710 C&T mouse port chip driver");
MODULE_LICENSE("GPL");
-static char ct82c710_name[] = "C&T 82c710 mouse port";
-static char ct82c710_phys[16];
-
/*
* ct82c710 interface
*/
#define CT82C710_IRQ 12
-static int ct82c710_data;
-static int ct82c710_status;
+#define CT82C710_DATA ct82c710_iores.start
+#define CT82C710_STATUS (ct82c710_iores.start + 1)
+
+static struct serio *ct82c710_port;
+static struct platform_device *ct82c710_device;
+static struct resource ct82c710_iores;
-static irqreturn_t ct82c710_interrupt(int cpl, void *dev_id, struct pt_regs * regs);
+/*
+ * Interrupt handler for the 82C710 mouse port. A character
+ * is waiting in the 82C710.
+ */
+
+static irqreturn_t ct82c710_interrupt(int cpl, void *dev_id, struct pt_regs * regs)
+{
+ return serio_interrupt(ct82c710_port, inb(CT82C710_DATA), 0, regs);
+}
/*
* Wait for device to send output char and flush any input char.
{
int timeout = 60000;
- while ((inb(ct82c710_status) & (CT82C710_RX_FULL | CT82C710_TX_IDLE | CT82C710_DEV_IDLE))
+ while ((inb(CT82C710_STATUS) & (CT82C710_RX_FULL | CT82C710_TX_IDLE | CT82C710_DEV_IDLE))
!= (CT82C710_DEV_IDLE | CT82C710_TX_IDLE) && timeout) {
- if (inb_p(ct82c710_status) & CT82C710_RX_FULL) inb_p(ct82c710_data);
+ if (inb_p(CT82C710_STATUS) & CT82C710_RX_FULL) inb_p(CT82C710_DATA);
udelay(1);
timeout--;
if (ct82c170_wait())
printk(KERN_WARNING "ct82c710.c: Device busy in close()\n");
- outb_p(inb_p(ct82c710_status) & ~(CT82C710_ENABLE | CT82C710_INTS_ON), ct82c710_status);
+ outb_p(inb_p(CT82C710_STATUS) & ~(CT82C710_ENABLE | CT82C710_INTS_ON), CT82C710_STATUS);
if (ct82c170_wait())
printk(KERN_WARNING "ct82c710.c: Device busy in close()\n");
if (request_irq(CT82C710_IRQ, ct82c710_interrupt, 0, "ct82c710", NULL))
return -1;
- status = inb_p(ct82c710_status);
+ status = inb_p(CT82C710_STATUS);
status |= (CT82C710_ENABLE | CT82C710_RESET);
- outb_p(status, ct82c710_status);
+ outb_p(status, CT82C710_STATUS);
status &= ~(CT82C710_RESET);
- outb_p(status, ct82c710_status);
+ outb_p(status, CT82C710_STATUS);
status |= CT82C710_INTS_ON;
- outb_p(status, ct82c710_status); /* Enable interrupts */
+ outb_p(status, CT82C710_STATUS); /* Enable interrupts */
while (ct82c170_wait()) {
printk(KERN_ERR "ct82c710: Device busy in open()\n");
status &= ~(CT82C710_ENABLE | CT82C710_INTS_ON);
- outb_p(status, ct82c710_status);
+ outb_p(status, CT82C710_STATUS);
free_irq(CT82C710_IRQ, NULL);
return -1;
}
static int ct82c710_write(struct serio *port, unsigned char c)
{
if (ct82c170_wait()) return -1;
- outb_p(c, ct82c710_data);
+ outb_p(c, CT82C710_DATA);
return 0;
}
-static struct serio ct82c710_port =
-{
- .type = SERIO_8042,
- .name = ct82c710_name,
- .phys = ct82c710_phys,
- .write = ct82c710_write,
- .open = ct82c710_open,
- .close = ct82c710_close,
-};
-
-/*
- * Interrupt handler for the 82C710 mouse port. A character
- * is waiting in the 82C710.
- */
-
-static irqreturn_t ct82c710_interrupt(int cpl, void *dev_id, struct pt_regs * regs)
-{
- return serio_interrupt(&ct82c710_port, inb(ct82c710_data), 0, regs);
-}
-
/*
* See if we can find a 82C710 device. Read mouse address.
*/
-static int __init ct82c710_probe(void)
+static int __init ct82c710_detect(void)
{
outb_p(0x55, 0x2fa); /* Any value except 9, ff or 36 */
outb_p(0xaa, 0x3fa); /* Inverse of 55 */
outb_p(0x1b, 0x2fa); /* Inverse of e4 */
outb_p(0x0f, 0x390); /* Write index */
if (inb_p(0x391) != 0xe4) /* Config address found? */
- return -1; /* No: no 82C710 here */
+ return -ENODEV; /* No: no 82C710 here */
outb_p(0x0d, 0x390); /* Write index */
- ct82c710_data = inb_p(0x391) << 2; /* Get mouse I/O address */
- ct82c710_status = ct82c710_data + 1;
+ ct82c710_iores.start = inb_p(0x391) << 2; /* Get mouse I/O address */
+ ct82c710_iores.end = ct82c710_iores.start + 1;
+ ct82c710_iores.flags = IORESOURCE_IO;
outb_p(0x0f, 0x390);
outb_p(0x0f, 0x391); /* Close config mode */
return 0;
}
-int __init ct82c710_init(void)
+static int __devinit ct82c710_probe(struct platform_device *dev)
{
- if (ct82c710_probe())
- return -ENODEV;
+ ct82c710_port = kzalloc(sizeof(struct serio), GFP_KERNEL);
+ if (!ct82c710_port)
+ return -ENOMEM;
+
+ ct82c710_port->id.type = SERIO_8042;
+ ct82c710_port->dev.parent = &dev->dev;
+ ct82c710_port->open = ct82c710_open;
+ ct82c710_port->close = ct82c710_close;
+ ct82c710_port->write = ct82c710_write;
+ strlcpy(ct82c710_port->name, "C&T 82c710 mouse port",
+ sizeof(ct82c710_port->name));
+ snprintf(ct82c710_port->phys, sizeof(ct82c710_port->phys),
+ "isa%04lx/serio0", CT82C710_DATA);
+
+ serio_register_port(ct82c710_port);
- if (request_region(ct82c710_data, 2, "ct82c710"))
- return -EBUSY;
+ return 0;
+}
- sprintf(ct82c710_phys, "isa%04x/serio0", ct82c710_data);
+static int __devexit ct82c710_remove(struct platform_device *dev)
+{
+ serio_unregister_port(ct82c710_port);
- serio_register_port(&ct82c710_port);
+ return 0;
+}
- printk(KERN_INFO "serio: C&T 82c710 mouse port at %#x irq %d\n",
- ct82c710_data, CT82C710_IRQ);
+static struct platform_driver ct82c710_driver = {
+ .driver = {
+ .name = "ct82c710",
+ .owner = THIS_MODULE,
+ },
+ .probe = ct82c710_probe,
+ .remove = __devexit_p(ct82c710_remove),
+};
+
+
+static int __init ct82c710_init(void)
+{
+ int error;
+
+ error = ct82c710_detect();
+ if (error)
+ return error;
+
+ error = platform_driver_register(&ct82c710_driver);
+ if (error)
+ return error;
+
+ ct82c710_device = platform_device_alloc("ct82c710", -1);
+ if (!ct82c710_device) {
+ error = -ENOMEM;
+ goto err_unregister_driver;
+ }
+
+ error = platform_device_add_resources(ct82c710_device, &ct82c710_iores, 1);
+ if (error)
+ goto err_free_device;
+
+ error = platform_device_add(ct82c710_device);
+ if (error)
+ goto err_free_device;
+
+ serio_register_port(ct82c710_port);
+
+ printk(KERN_INFO "serio: C&T 82c710 mouse port at %#lx irq %d\n",
+ CT82C710_DATA, CT82C710_IRQ);
return 0;
+
+ err_free_device:
+ platform_device_put(ct82c710_device);
+ err_unregister_driver:
+ platform_driver_unregister(&ct82c710_driver);
+ return error;
}
-void __exit ct82c710_exit(void)
+static void __exit ct82c710_exit(void)
{
- serio_unregister_port(&ct82c710_port);
- release_region(ct82c710_data, 2);
+ platform_device_unregister(ct82c710_device);
+ platform_driver_unregister(&ct82c710_driver);
}
module_init(ct82c710_init);