#define GUNZE_MAX_LENGTH 10
-static char *gunze_name = "Gunze AHL-51S TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct gunze {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[GUNZE_MAX_LENGTH];
char phys[32];
};
-static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs)
+static void gunze_process_packet(struct gunze* gunze)
{
- struct input_dev *dev = &gunze->dev;
+ struct input_dev *dev = gunze->dev;
if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
- gunze->data[10] = 0;
- printk(KERN_WARNING "gunze.c: bad packet: >%s<\n", gunze->data);
+ printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
return;
}
- input_regs(dev, regs);
- input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10) * 4);
- input_report_abs(dev, ABS_Y, 3072 - simple_strtoul(gunze->data + 6, NULL, 10) * 3);
+ input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10));
+ input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10));
input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T');
input_sync(dev);
}
static irqreturn_t gunze_interrupt(struct serio *serio,
- unsigned char data, unsigned int flags, struct pt_regs *regs)
+ unsigned char data, unsigned int flags)
{
- struct gunze* gunze = serio->private;
+ struct gunze* gunze = serio_get_drvdata(serio);
if (data == '\r') {
- gunze_process_packet(gunze, regs);
+ gunze_process_packet(gunze);
gunze->idx = 0;
} else {
if (gunze->idx < GUNZE_MAX_LENGTH)
static void gunze_disconnect(struct serio *serio)
{
- struct gunze* gunze = serio->private;
- input_unregister_device(&gunze->dev);
+ struct gunze *gunze = serio_get_drvdata(serio);
+
+ input_get_device(gunze->dev);
+ input_unregister_device(gunze->dev);
serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_put_device(gunze->dev);
kfree(gunze);
}
/*
* gunze_connect() is the routine that is called when someone adds a
- * new serio device. It looks whether it was registered as a Gunze touchscreen
- * and if yes, registers it as an input device.
+ * new serio device that supports Gunze protocol and registers it as
+ * an input device.
*/
-static void gunze_connect(struct serio *serio, struct serio_driver *drv)
+static int gunze_connect(struct serio *serio, struct serio_driver *drv)
{
struct gunze *gunze;
-
- if (serio->type != (SERIO_RS232 | SERIO_GUNZE))
- return;
-
- if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL)))
- return;
-
- memset(gunze, 0, sizeof(struct gunze));
-
- init_input_dev(&gunze->dev);
- gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(&gunze->dev, ABS_X, 96, 4000, 0, 0);
- input_set_abs_params(&gunze->dev, ABS_Y, 72, 3000, 0, 0);
+ struct input_dev *input_dev;
+ int err;
+
+ gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!gunze || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
gunze->serio = serio;
- serio->private = gunze;
-
- sprintf(gunze->phys, "%s/input0", serio->phys);
-
- gunze->dev.private = gunze;
- gunze->dev.name = gunze_name;
- gunze->dev.phys = gunze->phys;
- gunze->dev.id.bustype = BUS_RS232;
- gunze->dev.id.vendor = SERIO_GUNZE;
- gunze->dev.id.product = 0x0051;
- gunze->dev.id.version = 0x0100;
+ gunze->dev = input_dev;
+ snprintf(gunze->phys, sizeof(serio->phys), "%s/input0", serio->phys);
+
+ input_dev->private = gunze;
+ input_dev->name = "Gunze AHL-51S TouchScreen";
+ input_dev->phys = gunze->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_GUNZE;
+ input_dev->id.product = 0x0051;
+ input_dev->id.version = 0x0100;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0);
+
+ serio_set_drvdata(serio, gunze);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto fail2;
+
+ err = input_register_device(gunze->dev);
+ if (err)
+ goto fail3;
- if (serio_open(serio, drv)) {
- kfree(gunze);
- return;
- }
-
- input_register_device(&gunze->dev);
+ return 0;
- printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(gunze);
+ return err;
}
/*
- * The serio device structure.
+ * The serio driver structure.
*/
+static struct serio_device_id gunze_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_GUNZE,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, gunze_serio_ids);
+
static struct serio_driver gunze_drv = {
.driver = {
.name = "gunze",
},
.description = DRIVER_DESC,
+ .id_table = gunze_serio_ids,
.interrupt = gunze_interrupt,
.connect = gunze_connect,
.disconnect = gunze_disconnect,
* The functions for inserting/removing us as a module.
*/
-int __init gunze_init(void)
+static int __init gunze_init(void)
{
- serio_register_driver(&gunze_drv);
- return 0;
+ return serio_register_driver(&gunze_drv);
}
-void __exit gunze_exit(void)
+static void __exit gunze_exit(void)
{
serio_unregister_driver(&gunze_drv);
}