config ADB
bool "Apple Desktop Bus (ADB) support"
- depends on MAC || PPC_PMAC
+ depends on MAC || (PPC_PMAC && PPC32)
help
Apple Desktop Bus (ADB) support is for support of devices which
are connected to an ADB port. ADB devices tend to have 4 pins.
on the "SMU" system control chip which replaces the old PMU.
If you don't know, say Y.
-config PMAC_PBOOK
- bool "Power management support for PowerBooks"
- depends on ADB_PMU
- ---help---
- This provides support for putting a PowerBook to sleep; it also
- enables media bay support. Power management works on the
- PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3 and
- the Titanium Powerbook G4, as well as the iBooks. You should get
- the power management daemon, pmud, to make it work and you must have
- the /dev/pmu device (see the pmud README).
-
- Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
-
- If you have a PowerBook, you should say Y here.
-
- You may also want to compile the dma sound driver as a module and
- have it autoloaded. The act of removing the module shuts down the
- sound hardware for more power savings.
-
-config PM
- bool
- depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK
- default y
-
config PMAC_APM_EMU
tristate "APM emulation"
- depends on PMAC_PBOOK
+ depends on PPC_PMAC && PPC32 && PM
+
+config PMAC_MEDIABAY
+ bool "Support PowerBook hotswap media bay"
+ depends on PPC_PMAC && PPC32
+ help
+ This option adds support for older PowerBook's hotswap media bay
+ that can contains batteries, floppy drives, or IDE devices. PCI
+ devices are not fully supported in the bay as I never had one to
+ try with
# made a separate option since backlight may end up beeing used
# on non-powerbook machines (but only on PMU based ones AFAIK)
config PMAC_BACKLIGHT
bool "Backlight control for LCD screens"
- depends on ADB_PMU
+ depends on ADB_PMU && (BROKEN || !PPC64)
help
Say Y here to build in code to manage the LCD backlight on a
Macintosh PowerBook. With this code, the backlight will be turned
events; also, the PowerBook button device will be enabled so you can
change the screen brightness.
-config MAC_SERIAL
- tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)"
- depends on PPC_PMAC && BROKEN
- help
- This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
- "Character devices --> Serial drivers --> PowerMac z85c30" option.
-
config ADB_MACIO
bool "Include MacIO (CHRP) ADB driver"
depends on ADB && PPC_CHRP && !PPC_PMAC64
config THERM_WINDTUNNEL
tristate "Support for thermal management on Windtunnel G4s"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the desktop
G4 "Windtunnel"
config THERM_ADT746X
tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
config THERM_PM72
tristate "Support for thermal management on PowerMac G5"
- depends on I2C && I2C_KEYWEST && PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC64
help
This driver provides thermostat and fan control for the desktop
G5 machines.
+config WINDFARM
+ tristate "New PowerMac thermal control infrastructure"
+
+config WINDFARM_PM81
+ tristate "Support for thermal management on iMac G5"
+ depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+ select I2C_POWERMAC
+ help
+ This driver provides thermal control for the iMacG5
+
+config WINDFARM_PM91
+ tristate "Support for thermal management on PowerMac9,1"
+ depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+ select I2C_POWERMAC
+ help
+ This driver provides thermal control for the PowerMac9,1
+ which is the recent (SMU based) single CPU desktop G5
+
+config WINDFARM_PM112
+ tristate "Support for thermal management on PowerMac11,2"
+ depends on WINDFARM && I2C && PMAC_SMU
+ select I2C_POWERMAC
+ help
+ This driver provides thermal control for the PowerMac11,2
+ which are the recent dual and quad G5 machines using the
+ 970MP dual-core processor.
+
config ANSLCD
tristate "Support for ANS LCD display"
depends on ADB_CUDA && PPC_PMAC