linux 2.6.16.38 w/ vs2.0.3-rc1

[linux-2.6.git] / drivers / md / Kconfig

diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index ac25a48..ac43f98 100644 (file)
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -127,33 +127,6 @@ config MD_RAID5
 
          If unsure, say Y.
 
-config MD_RAID5_RESHAPE
-       bool "Support adding drives to a raid-5 array (experimental)"
-       depends on MD_RAID5 && EXPERIMENTAL
-       ---help---
-         A RAID-5 set can be expanded by adding extra drives. This
-         requires "restriping" the array which means (almost) every
-         block must be written to a different place.
-
-          This option allows such restriping to be done while the array
-         is online.  However it is still EXPERIMENTAL code.  It should
-         work, but please be sure that you have backups.
-
-         You will need mdadm verion 2.4.1 or later to use this
-         feature safely.  During the early stage of reshape there is
-         a critical section where live data is being over-written.  A
-         crash during this time needs extra care for recovery.  The
-         newer mdadm takes a copy of the data in the critical section
-         and will restore it, if necessary, after a crash.
-
-         The mdadm usage is e.g.
-              mdadm --grow /dev/md1 --raid-disks=6
-         to grow '/dev/md1' to having 6 disks.
-
-         Note: The array can only be expanded, not contracted.
-         There should be enough spares already present to make the new
-         array workable.
-
 config MD_RAID6
        tristate "RAID-6 mode"
        depends on BLK_DEV_MD