/*
- * Bt8xx based DVB adapter driver
+ * Bt8xx based DVB adapter driver
*
* Copyright (C) 2002,2003 Florian Schirmer <jolt@tuxbox.org>
*
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
-
#include "dvb-bt8xx.h"
-
#include "bt878.h"
static int debug;
MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
#define dprintk( args... ) \
- do { \
+ do \
if (debug) printk(KERN_DEBUG args); \
- } while (0)
+ while (0)
+
+#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
static void dvb_bt8xx_task(unsigned long data)
{
static int dvb_bt8xx_start_feed(struct dvb_demux_feed *dvbdmxfeed)
{
- struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct dvb_demux*dvbdmx = dvbdmxfeed->demux;
struct dvb_bt8xx_card *card = dvbdmx->priv;
int rc;
dprintk("dvb_bt8xx: start_feed\n");
-
+
if (!dvbdmx->dmx.frontend)
return -EINVAL;
- down(&card->lock);
+ mutex_lock(&card->lock);
card->nfeeds++;
rc = card->nfeeds;
if (card->nfeeds == 1)
bt878_start(card->bt, card->gpio_mode,
card->op_sync_orin, card->irq_err_ignore);
- up(&card->lock);
+ mutex_unlock(&card->lock);
return rc;
}
struct dvb_bt8xx_card *card = dvbdmx->priv;
dprintk("dvb_bt8xx: stop_feed\n");
-
+
if (!dvbdmx->dmx.frontend)
return -EINVAL;
-
- down(&card->lock);
+
+ mutex_lock(&card->lock);
card->nfeeds--;
if (card->nfeeds == 0)
bt878_stop(card->bt);
- up(&card->lock);
+ mutex_unlock(&card->lock);
return 0;
}
return 0;
}
-static struct bt878 __init *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
{
unsigned int card_nr;
-
+
/* Hmm, n squared. Hope n is small */
- for (card_nr = 0; card_nr < bt878_num; card_nr++) {
+ for (card_nr = 0; card_nr < bt878_num; card_nr++)
if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev))
return &bt878[card_nr];
- }
return NULL;
}
-
static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 };
static u8 mt352_reset [] = { 0x50, 0x80 };
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0x20 };
- static u8 mt352_gpp_ctl_cfg [] = { 0x75, 0x33 };
+ static u8 mt352_gpp_ctl_cfg [] = { 0x8C, 0x33 };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
- mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
+ mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
return 0;
}
-static int thomson_dtt7579_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+static int thomson_dtt7579_tuner_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf, int buf_len)
{
u32 div;
unsigned char bs = 0;
unsigned char cp = 0;
- #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
+ if (buf_len < 5)
+ return -EINVAL;
+
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
- if (params->frequency < 542000000) cp = 0xb4;
- else if (params->frequency < 771000000) cp = 0xbc;
- else cp = 0xf4;
+ if (params->frequency < 542000000)
+ cp = 0xb4;
+ else if (params->frequency < 771000000)
+ cp = 0xbc;
+ else
+ cp = 0xf4;
- if (params->frequency == 0) bs = 0x03;
- else if (params->frequency < 443250000) bs = 0x02;
- else bs = 0x08;
+ if (params->frequency == 0)
+ bs = 0x03;
+ else if (params->frequency < 443250000)
+ bs = 0x02;
+ else
+ bs = 0x08;
- pllbuf[0] = 0xc0; // Note: non-linux standard PLL i2c address
+ pllbuf[0] = 0x60;
pllbuf[1] = div >> 8;
- pllbuf[2] = div & 0xff;
- pllbuf[3] = cp;
- pllbuf[4] = bs;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = cp;
+ pllbuf[4] = bs;
- return 0;
+ return 5;
}
static struct mt352_config thomson_dtt7579_config = {
-
.demod_address = 0x0f,
.demod_init = thomson_dtt7579_demod_init,
- .pll_set = thomson_dtt7579_pll_set,
};
-static int cx24108_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+static struct zl10353_config thomson_dtt7579_zl10353_config = {
+ .demod_address = 0x0f,
+};
+
+static int cx24108_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
- u32 freq = params->frequency;
-
- int i, a, n, pump;
- u32 band, pll;
-
-
- u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
- 1576000,1718000,1856000,2036000,2150000};
- u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
- 0x00102000,0x00104000,0x00108000,0x00110000,
- 0x00120000,0x00140000};
-
-#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
- printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
-
- /* This is really the bit driving the tuner chip cx24108 */
-
- if(freq<950000) freq=950000; /* kHz */
- if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
-
- /* decide which VCO to use for the input frequency */
- for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
- printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
- band=bandsel[i];
- /* the gain values must be set by SetSymbolrate */
- /* compute the pll divider needed, from Conexant data sheet,
- resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
- depending on the divider bit. It is set to /4 on the 2 lowest
- bands */
- n=((i<=2?2:1)*freq*10L)/(XTAL/100);
- a=n%32; n/=32; if(a==0) n--;
- pump=(freq<(osci[i-1]+osci[i])/2);
- pll=0xf8000000|
- ((pump?1:2)<<(14+11))|
- ((n&0x1ff)<<(5+11))|
- ((a&0x1f)<<11);
- /* everything is shifted left 11 bits to left-align the bits in the
- 32bit word. Output to the tuner goes MSB-aligned, after all */
- printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
- cx24110_pll_write(fe,band);
- /* set vga and vca to their widest-band settings, as a precaution.
- SetSymbolrate might not be called to set this up */
- cx24110_pll_write(fe,0x500c0000);
- cx24110_pll_write(fe,0x83f1f800);
- cx24110_pll_write(fe,pll);
-/* writereg(client,0x56,0x7f);*/
+ u32 freq = params->frequency;
+
+ int i, a, n, pump;
+ u32 band, pll;
+
+ u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+ 1576000,1718000,1856000,2036000,2150000};
+ u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+ 0x00102000,0x00104000,0x00108000,0x00110000,
+ 0x00120000,0x00140000};
+
+ #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+ printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
+
+ /* This is really the bit driving the tuner chip cx24108 */
+
+ if (freq<950000)
+ freq = 950000; /* kHz */
+ else if (freq>2150000)
+ freq = 2150000; /* satellite IF is 950..2150MHz */
+
+ /* decide which VCO to use for the input frequency */
+ for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+ printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
+ band=bandsel[i];
+ /* the gain values must be set by SetSymbolrate */
+ /* compute the pll divider needed, from Conexant data sheet,
+ resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+ depending on the divider bit. It is set to /4 on the 2 lowest
+ bands */
+ n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+ a=n%32; n/=32; if(a==0) n--;
+ pump=(freq<(osci[i-1]+osci[i])/2);
+ pll=0xf8000000|
+ ((pump?1:2)<<(14+11))|
+ ((n&0x1ff)<<(5+11))|
+ ((a&0x1f)<<11);
+ /* everything is shifted left 11 bits to left-align the bits in the
+ 32bit word. Output to the tuner goes MSB-aligned, after all */
+ printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+ cx24110_pll_write(fe,band);
+ /* set vga and vca to their widest-band settings, as a precaution.
+ SetSymbolrate might not be called to set this up */
+ cx24110_pll_write(fe,0x500c0000);
+ cx24110_pll_write(fe,0x83f1f800);
+ cx24110_pll_write(fe,pll);
+ //writereg(client,0x56,0x7f);
return 0;
}
-static int pinnsat_pll_init(struct dvb_frontend* fe)
+static int pinnsat_tuner_init(struct dvb_frontend* fe)
{
- return 0;
+ struct dvb_bt8xx_card *card = fe->dvb->priv;
+
+ bttv_gpio_enable(card->bttv_nr, 1, 1); /* output */
+ bttv_write_gpio(card->bttv_nr, 1, 1); /* relay on */
+
+ return 0;
}
+static int pinnsat_tuner_sleep(struct dvb_frontend* fe)
+{
+ struct dvb_bt8xx_card *card = fe->dvb->priv;
-static struct cx24110_config pctvsat_config = {
+ bttv_write_gpio(card->bttv_nr, 1, 0); /* relay off */
+
+ return 0;
+}
+static struct cx24110_config pctvsat_config = {
.demod_address = 0x55,
- .pll_init = pinnsat_pll_init,
- .pll_set = cx24108_pll_set,
};
-
-static int microtune_mt7202dtf_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+static int microtune_mt7202dtf_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
u8 cfg, cpump, band_select;
div = (36000000 + params->frequency + 83333) / 166666;
cfg = 0x88;
- if (params->frequency < 175000000) cpump = 2;
- else if (params->frequency < 390000000) cpump = 1;
- else if (params->frequency < 470000000) cpump = 2;
- else if (params->frequency < 750000000) cpump = 2;
- else cpump = 3;
+ if (params->frequency < 175000000)
+ cpump = 2;
+ else if (params->frequency < 390000000)
+ cpump = 1;
+ else if (params->frequency < 470000000)
+ cpump = 2;
+ else if (params->frequency < 750000000)
+ cpump = 2;
+ else
+ cpump = 3;
- if (params->frequency < 175000000) band_select = 0x0e;
- else if (params->frequency < 470000000) band_select = 0x05;
- else band_select = 0x03;
+ if (params->frequency < 175000000)
+ band_select = 0x0e;
+ else if (params->frequency < 470000000)
+ band_select = 0x05;
+ else
+ band_select = 0x03;
data[0] = (div >> 8) & 0x7f;
data[1] = div & 0xff;
data[2] = ((div >> 10) & 0x60) | cfg;
- data[3] = cpump | band_select;
+ data[3] = (cpump << 6) | band_select;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(card->i2c_adapter, &msg, 1);
return (div * 166666 - 36000000);
}
}
static struct sp887x_config microtune_mt7202dtf_config = {
-
.demod_address = 0x70,
- .pll_set = microtune_mt7202dtf_pll_set,
.request_firmware = microtune_mt7202dtf_request_firmware,
};
-
-
static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
static u8 mt352_reset [] = { 0x50, 0x80 };
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
- 0x00, 0xFF, 0x00, 0x40, 0x40 };
+ 0x00, 0xFF, 0x00, 0x40, 0x40 };
static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
udelay(2000);
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
return 0;
}
-static int advbt771_samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf)
+static int advbt771_samsung_tdtc9251dh0_tuner_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf, int buf_len)
{
u32 div;
unsigned char bs = 0;
unsigned char cp = 0;
- #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
+ if (buf_len < 5) return -EINVAL;
+
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
- if (params->frequency < 150000000) cp = 0xB4;
- else if (params->frequency < 173000000) cp = 0xBC;
- else if (params->frequency < 250000000) cp = 0xB4;
- else if (params->frequency < 400000000) cp = 0xBC;
- else if (params->frequency < 420000000) cp = 0xF4;
- else if (params->frequency < 470000000) cp = 0xFC;
- else if (params->frequency < 600000000) cp = 0xBC;
- else if (params->frequency < 730000000) cp = 0xF4;
- else cp = 0xFC;
-
- if (params->frequency < 150000000) bs = 0x01;
- else if (params->frequency < 173000000) bs = 0x01;
- else if (params->frequency < 250000000) bs = 0x02;
- else if (params->frequency < 400000000) bs = 0x02;
- else if (params->frequency < 420000000) bs = 0x02;
- else if (params->frequency < 470000000) bs = 0x02;
- else if (params->frequency < 600000000) bs = 0x08;
- else if (params->frequency < 730000000) bs = 0x08;
- else bs = 0x08;
-
- pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
+ if (params->frequency < 150000000)
+ cp = 0xB4;
+ else if (params->frequency < 173000000)
+ cp = 0xBC;
+ else if (params->frequency < 250000000)
+ cp = 0xB4;
+ else if (params->frequency < 400000000)
+ cp = 0xBC;
+ else if (params->frequency < 420000000)
+ cp = 0xF4;
+ else if (params->frequency < 470000000)
+ cp = 0xFC;
+ else if (params->frequency < 600000000)
+ cp = 0xBC;
+ else if (params->frequency < 730000000)
+ cp = 0xF4;
+ else
+ cp = 0xFC;
+
+ if (params->frequency < 150000000)
+ bs = 0x01;
+ else if (params->frequency < 173000000)
+ bs = 0x01;
+ else if (params->frequency < 250000000)
+ bs = 0x02;
+ else if (params->frequency < 400000000)
+ bs = 0x02;
+ else if (params->frequency < 420000000)
+ bs = 0x02;
+ else if (params->frequency < 470000000)
+ bs = 0x02;
+ else if (params->frequency < 600000000)
+ bs = 0x08;
+ else if (params->frequency < 730000000)
+ bs = 0x08;
+ else
+ bs = 0x08;
+
+ pllbuf[0] = 0x61;
pllbuf[1] = div >> 8;
- pllbuf[2] = div & 0xff;
- pllbuf[3] = cp;
- pllbuf[4] = bs;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = cp;
+ pllbuf[4] = bs;
- return 0;
+ return 5;
}
static struct mt352_config advbt771_samsung_tdtc9251dh0_config = {
-
.demod_address = 0x0f,
.demod_init = advbt771_samsung_tdtc9251dh0_demod_init,
- .pll_set = advbt771_samsung_tdtc9251dh0_pll_set,
};
-
static struct dst_config dst_config = {
-
.demod_address = 0x55,
};
+static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+ struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
+
+ return request_firmware(fw, name, &bt->bt->dev->dev);
+}
-static int vp3021_alps_tded4_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+static void or51211_setmode(struct dvb_frontend * fe, int mode)
+{
+ struct dvb_bt8xx_card *bt = fe->dvb->priv;
+ bttv_write_gpio(bt->bttv_nr, 0x0002, mode); /* Reset */
+ msleep(20);
+}
+
+static void or51211_reset(struct dvb_frontend * fe)
+{
+ struct dvb_bt8xx_card *bt = fe->dvb->priv;
+
+ /* RESET DEVICE
+ * reset is controled by GPIO-0
+ * when set to 0 causes reset and when to 1 for normal op
+ * must remain reset for 128 clock cycles on a 50Mhz clock
+ * also PRM1 PRM2 & PRM4 are controled by GPIO-1,GPIO-2 & GPIO-4
+ * We assume that the reset has be held low long enough or we
+ * have been reset by a power on. When the driver is unloaded
+ * reset set to 0 so if reloaded we have been reset.
+ */
+ /* reset & PRM1,2&4 are outputs */
+ int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F);
+ if (ret != 0)
+ printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR (%i)\n", ret);
+ bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000); /* Reset */
+ msleep(20);
+ /* Now set for normal operation */
+ bttv_write_gpio(bt->bttv_nr, 0x0001F, 0x0001);
+ /* wait for operation to begin */
+ msleep(500);
+}
+
+static void or51211_sleep(struct dvb_frontend * fe)
+{
+ struct dvb_bt8xx_card *bt = fe->dvb->priv;
+ bttv_write_gpio(bt->bttv_nr, 0x0001, 0x0000);
+}
+
+static struct or51211_config or51211_config = {
+ .demod_address = 0x15,
+ .request_firmware = or51211_request_firmware,
+ .setmode = or51211_setmode,
+ .reset = or51211_reset,
+ .sleep = or51211_sleep,
+};
+
+static int vp3021_alps_tded4_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
u8 buf[4];
else
return -EINVAL;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(card->i2c_adapter, &msg, 1);
return 0;
}
static struct nxt6000_config vp3021_alps_tded4_config = {
-
.demod_address = 0x0a,
.clock_inversion = 1,
- .pll_set = vp3021_alps_tded4_pll_set,
};
+static int digitv_alps_tded4_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x20, 0xa0 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+ mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int digitv_alps_tded4_tuner_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf, int buf_len)
+{
+ u32 div;
+ struct dvb_ofdm_parameters *op = ¶ms->u.ofdm;
+
+ if (buf_len < 5)
+ return -EINVAL;
+
+ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ pllbuf[0] = 0x61;
+ pllbuf[1] = (div >> 8) & 0x7F;
+ pllbuf[2] = div & 0xFF;
+ pllbuf[3] = 0x85;
+
+ dprintk("frequency %u, div %u\n", params->frequency, div);
+
+ if (params->frequency < 470000000)
+ pllbuf[4] = 0x02;
+ else if (params->frequency > 823000000)
+ pllbuf[4] = 0x88;
+ else
+ pllbuf[4] = 0x08;
+
+ if (op->bandwidth == 8)
+ pllbuf[4] |= 0x04;
+
+ return 5;
+}
+
+static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt)
+{
+ /*
+ * Reset the frontend, must be called before trying
+ * to initialise the MT352 or mt352_attach
+ * will fail. Same goes for the nxt6000 frontend.
+ *
+ */
+
+ int ret = bttv_gpio_enable(bt->bttv_nr, 0x08, 0x08);
+ if (ret != 0)
+ printk(KERN_WARNING "digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n", ret);
+
+ /* Pulse the reset line */
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x00); /* Low */
+ msleep(100);
+
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+}
+
+static struct mt352_config digitv_alps_tded4_config = {
+ .demod_address = 0x0a,
+ .demod_init = digitv_alps_tded4_demod_init,
+};
+
+static struct lgdt330x_config tdvs_tua6034_config = {
+ .demod_address = 0x0e,
+ .demod_chip = LGDT3303,
+ .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+};
+
+static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
+{
+ /* Set pin 27 of the lgdt3303 chip high to reset the frontend */
+
+ /* Pulse the reset line */
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
+ msleep(100);
+
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+ msleep(100);
+}
static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
{
+ struct dst_state* state = NULL;
+
switch(type) {
-#ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
- card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter);
+ case BTTV_BOARD_DVICO_DVBT_LITE:
+ card->fe = dvb_attach(mt352_attach, &thomson_dtt7579_config, card->i2c_adapter);
+
+ if (card->fe == NULL)
+ card->fe = dvb_attach(zl10353_attach, &thomson_dtt7579_zl10353_config,
+ card->i2c_adapter);
+
if (card->fe != NULL) {
- card->fe->ops->info.frequency_min = 174000000;
- card->fe->ops->info.frequency_max = 862000000;
- break;
+ card->fe->ops.tuner_ops.calc_regs = thomson_dtt7579_tuner_calc_regs;
+ card->fe->ops.info.frequency_min = 174000000;
+ card->fe->ops.info.frequency_max = 862000000;
}
break;
-#endif
-
-#ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
-#else
- case BTTV_NEBULA_DIGITV:
-#endif
- card->fe = nxt6000_attach(&vp3021_alps_tded4_config, card->i2c_adapter);
+
+ case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+ lgdt330x_reset(card);
+ card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter);
if (card->fe != NULL) {
- break;
+ dvb_attach(lgh06xf_attach, card->fe, card->i2c_adapter);
+ dprintk ("dvb_bt8xx: lgdt330x detected\n");
}
break;
- case BTTV_AVDVBT_761:
- card->fe = sp887x_attach(µtune_mt7202dtf_config, card->i2c_adapter);
+ case BTTV_BOARD_NEBULA_DIGITV:
+ /*
+ * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK);
+ * this would be a cleaner solution than trying each frontend in turn.
+ */
+
+ /* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */
+ digitv_alps_tded4_reset(card);
+ card->fe = dvb_attach(nxt6000_attach, &vp3021_alps_tded4_config, card->i2c_adapter);
if (card->fe != NULL) {
+ card->fe->ops.tuner_ops.set_params = vp3021_alps_tded4_tuner_set_params;
+ dprintk ("dvb_bt8xx: an nxt6000 was detected on your digitv card\n");
break;
}
- break;
- case BTTV_AVDVBT_771:
- card->fe = mt352_attach(&advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
+ /* New Nebula (marked (c)2005 on low profile pci card) has mt352 demod */
+ digitv_alps_tded4_reset(card);
+ card->fe = dvb_attach(mt352_attach, &digitv_alps_tded4_config, card->i2c_adapter);
+
if (card->fe != NULL) {
- card->fe->ops->info.frequency_min = 174000000;
- card->fe->ops->info.frequency_max = 862000000;
- break;
+ card->fe->ops.tuner_ops.calc_regs = digitv_alps_tded4_tuner_calc_regs;
+ dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n");
}
break;
- case BTTV_TWINHAN_DST:
- card->fe = dst_attach(&dst_config, card->i2c_adapter, card->bt);
- if (card->fe != NULL) {
- break;
+ case BTTV_BOARD_AVDVBT_761:
+ card->fe = dvb_attach(sp887x_attach, µtune_mt7202dtf_config, card->i2c_adapter);
+ if (card->fe) {
+ card->fe->ops.tuner_ops.set_params = microtune_mt7202dtf_tuner_set_params;
}
break;
-
- case BTTV_PINNACLESAT:
- card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter);
+
+ case BTTV_BOARD_AVDVBT_771:
+ card->fe = dvb_attach(mt352_attach, &advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
if (card->fe != NULL) {
+ card->fe->ops.tuner_ops.calc_regs = advbt771_samsung_tdtc9251dh0_tuner_calc_regs;
+ card->fe->ops.info.frequency_min = 174000000;
+ card->fe->ops.info.frequency_max = 862000000;
+ }
+ break;
+
+ case BTTV_BOARD_TWINHAN_DST:
+ /* DST is not a frontend driver !!! */
+ state = kmalloc(sizeof (struct dst_state), GFP_KERNEL);
+ if (!state) {
+ printk("dvb_bt8xx: No memory\n");
+ break;
+ }
+ /* Setup the Card */
+ state->config = &dst_config;
+ state->i2c = card->i2c_adapter;
+ state->bt = card->bt;
+ state->dst_ca = NULL;
+ /* DST is not a frontend, attaching the ASIC */
+ if (dvb_attach(dst_attach, state, &card->dvb_adapter) == NULL) {
+ printk("%s: Could not find a Twinhan DST.\n", __FUNCTION__);
break;
}
+ /* Attach other DST peripherals if any */
+ /* Conditional Access device */
+ card->fe = &state->frontend;
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA)
+ dvb_attach(dst_ca_attach, state, &card->dvb_adapter);
+ break;
+
+ case BTTV_BOARD_PINNACLESAT:
+ card->fe = dvb_attach(cx24110_attach, &pctvsat_config, card->i2c_adapter);
+ if (card->fe) {
+ card->fe->ops.tuner_ops.init = pinnsat_tuner_init;
+ card->fe->ops.tuner_ops.sleep = pinnsat_tuner_sleep;
+ card->fe->ops.tuner_ops.set_params = cx24108_tuner_set_params;
+ }
+ break;
+
+ case BTTV_BOARD_PC_HDTV:
+ card->fe = dvb_attach(or51211_attach, &or51211_config, card->i2c_adapter);
break;
}
- if (card->fe == NULL) {
+ if (card->fe == NULL)
printk("dvb-bt8xx: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
card->bt->dev->vendor,
card->bt->dev->device,
card->bt->dev->subsystem_vendor,
card->bt->dev->subsystem_device);
- } else {
- if (dvb_register_frontend(card->dvb_adapter, card->fe)) {
+ else
+ if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
printk("dvb-bt8xx: Frontend registration failed!\n");
- if (card->fe->ops->release)
- card->fe->ops->release(card->fe);
+ dvb_frontend_detach(card->fe);
card->fe = NULL;
}
- }
}
-static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
{
int result;
- if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name,
- THIS_MODULE)) < 0) {
+ if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name, THIS_MODULE, &card->bt->dev->dev)) < 0) {
printk("dvb_bt8xx: dvb_register_adapter failed (errno = %d)\n", result);
return result;
-
}
- card->dvb_adapter->priv = card;
+ card->dvb_adapter.priv = card;
card->bt->adapter = card->i2c_adapter;
card->demux.start_feed = dvb_bt8xx_start_feed;
card->demux.stop_feed = dvb_bt8xx_stop_feed;
card->demux.write_to_decoder = NULL;
-
+
if ((result = dvb_dmx_init(&card->demux)) < 0) {
printk("dvb_bt8xx: dvb_dmx_init failed (errno = %d)\n", result);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
card->dmxdev.filternum = 256;
card->dmxdev.demux = &card->demux.dmx;
card->dmxdev.capabilities = 0;
-
- if ((result = dvb_dmxdev_init(&card->dmxdev, card->dvb_adapter)) < 0) {
+
+ if ((result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter)) < 0) {
printk("dvb_bt8xx: dvb_dmxdev_init failed (errno = %d)\n", result);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
-
+
card->fe_mem.source = DMX_MEMORY_FE;
if ((result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_mem)) < 0) {
card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- dvb_unregister_adapter(card->dvb_adapter);
+ dvb_unregister_adapter(&card->dvb_adapter);
return result;
}
- dvb_net_init(card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
+ dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
tasklet_init(&card->bt->tasklet, dvb_bt8xx_task, (unsigned long) card);
-
+
frontend_init(card, type);
return 0;
}
-static int dvb_bt8xx_probe(struct device *dev)
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
{
- struct bttv_sub_device *sub = to_bttv_sub_dev(dev);
struct dvb_bt8xx_card *card;
struct pci_dev* bttv_pci_dev;
int ret;
- if (!(card = kmalloc(sizeof(struct dvb_bt8xx_card), GFP_KERNEL)))
+ if (!(card = kzalloc(sizeof(struct dvb_bt8xx_card), GFP_KERNEL)))
return -ENOMEM;
- memset(card, 0, sizeof(*card));
- init_MUTEX(&card->lock);
+ mutex_init(&card->lock);
card->bttv_nr = sub->core->nr;
strncpy(card->card_name, sub->core->name, sizeof(sub->core->name));
card->i2c_adapter = &sub->core->i2c_adap;
- switch(sub->core->type)
- {
- case BTTV_PINNACLESAT:
+ switch(sub->core->type) {
+ case BTTV_BOARD_PINNACLESAT:
card->gpio_mode = 0x0400c060;
/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
- BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
- card->op_sync_orin = 0;
- card->irq_err_ignore = 0;
+ BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
break;
-
-#ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
-#endif
+
+ case BTTV_BOARD_DVICO_DVBT_LITE:
card->gpio_mode = 0x0400C060;
- card->op_sync_orin = 0;
- card->irq_err_ignore = 0;
- /* 26, 15, 14, 6, 5
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ /* 26, 15, 14, 6, 5
* A_PWRDN DA_DPM DA_SBR DA_IOM_DA
- * DA_APP(parallel) */
- break;
-
-#ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
-#else
- case BTTV_NEBULA_DIGITV:
-#endif
- case BTTV_AVDVBT_761:
+ * DA_APP(parallel) */
+ break;
+
+ case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+ card->gpio_mode = 0x0400c060;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ break;
+
+ case BTTV_BOARD_NEBULA_DIGITV:
+ case BTTV_BOARD_AVDVBT_761:
card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
- card->op_sync_orin = 0;
- card->irq_err_ignore = 0;
- /* A_PWRDN DA_SBR DA_APP (high speed serial) */
- break;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ /* A_PWRDN DA_SBR DA_APP (high speed serial) */
+ break;
- case BTTV_AVDVBT_771: //case 0x07711461:
+ case BTTV_BOARD_AVDVBT_771: //case 0x07711461:
card->gpio_mode = 0x0400402B;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
- card->irq_err_ignore = 0;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
/* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
- break;
+ break;
- case BTTV_TWINHAN_DST:
+ case BTTV_BOARD_TWINHAN_DST:
card->gpio_mode = 0x2204f2c;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
BT878_APPERR | BT878_AFBUS;
- /* 25,21,14,11,10,9,8,3,2 then
- * 0x33 = 5,4,1,0
- * A_SEL=SML, DA_MLB, DA_SBR,
- * DA_SDR=f, fifo trigger = 32 DWORDS
- * IOM = 0 == audio A/D
- * DPM = 0 == digital audio mode
- * == async data parallel port
- * then 0x33 (13 is set by start_capture)
- * DA_APP = async data parallel port,
- * ACAP_EN = 1,
- * RISC+FIFO ENABLE */
- break;
-
- default:
+ /* 25,21,14,11,10,9,8,3,2 then
+ * 0x33 = 5,4,1,0
+ * A_SEL=SML, DA_MLB, DA_SBR,
+ * DA_SDR=f, fifo trigger = 32 DWORDS
+ * IOM = 0 == audio A/D
+ * DPM = 0 == digital audio mode
+ * == async data parallel port
+ * then 0x33 (13 is set by start_capture)
+ * DA_APP = async data parallel port,
+ * ACAP_EN = 1,
+ * RISC+FIFO ENABLE */
+ break;
+
+ case BTTV_BOARD_PC_HDTV:
+ card->gpio_mode = 0x0100EC7B;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ break;
+
+ default:
printk(KERN_WARNING "dvb_bt8xx: Unknown bttv card type: %d.\n",
sub->core->type);
kfree(card);
return -ENODEV;
- }
+ }
dprintk("dvb_bt8xx: identified card%d as %s\n", card->bttv_nr, card->card_name);
kfree(card);
return -EFAULT;
+ }
-}
-
- init_MUTEX(&card->bt->gpio_lock);
+ mutex_init(&card->bt->gpio_lock);
card->bt->bttv_nr = sub->core->nr;
if ( (ret = dvb_bt8xx_load_card(card, sub->core->type)) ) {
return ret;
}
- dev_set_drvdata(dev, card);
+ dev_set_drvdata(&sub->dev, card);
return 0;
}
-static int dvb_bt8xx_remove(struct device *dev)
+static void dvb_bt8xx_remove(struct bttv_sub_device *sub)
{
- struct dvb_bt8xx_card *card = dev_get_drvdata(dev);
-
- dprintk("dvb_bt8xx: unloading card%d\n", card->bttv_nr);
-
- bt878_stop(card->bt);
- tasklet_kill(&card->bt->tasklet);
- dvb_net_release(&card->dvbnet);
- card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
- card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
- dvb_dmxdev_release(&card->dmxdev);
- dvb_dmx_release(&card->demux);
- if (card->fe) dvb_unregister_frontend(card->fe);
- dvb_unregister_adapter(card->dvb_adapter);
-
- kfree(card);
-
- return 0;
+ struct dvb_bt8xx_card *card = dev_get_drvdata(&sub->dev);
+
+ dprintk("dvb_bt8xx: unloading card%d\n", card->bttv_nr);
+
+ bt878_stop(card->bt);
+ tasklet_kill(&card->bt->tasklet);
+ dvb_net_release(&card->dvbnet);
+ card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
+ card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
+ dvb_dmxdev_release(&card->dmxdev);
+ dvb_dmx_release(&card->demux);
+ if (card->fe) {
+ dvb_unregister_frontend(card->fe);
+ dvb_frontend_detach(card->fe);
}
+ dvb_unregister_adapter(&card->dvb_adapter);
+
+ kfree(card);
+}
static struct bttv_sub_driver driver = {
.drv = {
.name = "dvb-bt8xx",
- .probe = dvb_bt8xx_probe,
- .remove = dvb_bt8xx_remove,
- /* FIXME:
- * .shutdown = dvb_bt8xx_shutdown,
- * .suspend = dvb_bt8xx_suspend,
- * .resume = dvb_bt8xx_resume,
- */
},
+ .probe = dvb_bt8xx_probe,
+ .remove = dvb_bt8xx_remove,
+ /* FIXME:
+ * .shutdown = dvb_bt8xx_shutdown,
+ * .suspend = dvb_bt8xx_suspend,
+ * .resume = dvb_bt8xx_resume,
+ */
};
static int __init dvb_bt8xx_init(void)
module_init(dvb_bt8xx_init);
module_exit(dvb_bt8xx_exit);
+
MODULE_DESCRIPTION("Bt8xx based DVB adapter driver");
MODULE_AUTHOR("Florian Schirmer <jolt@tuxbox.org>");
MODULE_LICENSE("GPL");
-
git://git.onelab.eu / linux-2.6.git / blobdiff