This commit was manufactured by cvs2svn to create branch 'vserver'.

[linux-2.6.git] / drivers / media / dvb / cinergyT2 / Kconfig

diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
new file mode 100644 (file)
index 0000000..2267140
--- /dev/null
+++ b/drivers/media/dvb/cinergyT2/Kconfig
@@ -0,0 +1,85 @@
+config DVB_CINERGYT2
+       tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver"
+       depends on DVB_CORE && USB
+       help
+         Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
+
+         Say Y if you own such a device and want to use it.
+
+
+config DVB_CINERGYT2_TUNING
+       bool "sophisticated fine-tuning for CinergyT2 cards"
+       depends on DVB_CINERGYT2
+       help
+         Here you can fine-tune some parameters of the CinergyT2 driver.
+
+         Normally you don't need to touch this, but in exotic setups you
+         may fine-tune your setup and adjust e.g. DMA buffer sizes for
+         a particular application.
+
+
+config DVB_CINERGYT2_STREAM_URB_COUNT
+       int "Number of queued USB Request Blocks for Highspeed Stream Transfers"
+       depends on DVB_CINERGYT2_TUNING
+        default "32"
+       help
+         USB Request Blocks for Highspeed Stream transfers are scheduled in
+         a queue for the Host Controller.
+
+         Usually the default value is a safe choice.
+
+         You may increase this number if you are using this device in a 
+         Server Environment with many high-traffic USB Highspeed devices 
+         sharing the same USB bus.
+
+
+config DVB_CINERGYT2_STREAM_BUF_SIZE
+       int "Size of URB Stream Buffers for Highspeed Transfers"
+       depends on DVB_CINERGYT2_TUNING
+        default "512"
+       help
+         Should be a multiple of native buffer size of 512 bytes.
+         Default value is a safe choice.
+
+         You may increase this number if you are using this device in a 
+         Server Environment with many high-traffic USB Highspeed devices 
+         sharing the same USB bus.
+
+
+config DVB_CINERGYT2_QUERY_INTERVAL
+       int "Status update interval [milliseconds]"
+       depends on DVB_CINERGYT2_TUNING
+        default "250"
+       help
+         This is the interval for status readouts from the demodulator.
+         You may try lower values if you need more responsive signal quality
+         measurements.
+
+         Please keep in mind that these updates cause traffic on the tuner
+         control bus and thus may or may not affect receiption sensitivity.
+
+         The default value should be a safe choice for common applications.
+
+
+config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
+       bool "Register the onboard IR Remote Control Receiver as Input Device"
+       depends on DVB_CINERGYT2_TUNING
+        default "yes"
+       help
+         Enable this option if you want to use the onboard Infrared Remote 
+         Control Receiver as Linux-Input device.
+
+         Right now only the keycode table for the default Remote Control
+         delivered with the device is supported, please see the driver
+         source code to find out how to add support for other controls.
+
+
+config DVB_CINERGYT2_RC_QUERY_INTERVAL
+       int "Infrared Remote Controller update interval [milliseconds]"
+       depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
+        default "100"
+       help
+         If you have a very fast-repeating remote control you can try lower
+         values, for normal consumer receivers the default value should be
+         a safe choice.
+