* This driver needs external firmware. Please use the commands
* "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
* "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
- * download/extract them, and then copy them to /usr/lib/hotplug/firmware.
+ * download/extract them, and then copy them to /usr/lib/hotplug/firmware
+ * or /lib/firmware (depending on configuration of firmware hotplug).
*/
#define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw"
#define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw"
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
#include "dvb_frontend.h"
#include "tda1004x.h"
struct tda1004x_state {
struct i2c_adapter* i2c;
- struct dvb_frontend_ops ops;
const struct tda1004x_config* config;
struct dvb_frontend frontend;
/* private demod data */
- u8 initialised;
enum tda1004x_demod demod_type;
- u8 fw_version;
};
-
static int debug;
#define dprintk(args...) \
do { \
#define TDA10046H_GPIO_OUT_SEL 0x41
#define TDA10046H_GPIO_SELECT 0x42
#define TDA10046H_AGC_CONF 0x43
+#define TDA10046H_AGC_THR 0x44
+#define TDA10046H_AGC_RENORM 0x45
#define TDA10046H_AGC_GAINS 0x46
#define TDA10046H_AGC_TUN_MIN 0x47
#define TDA10046H_AGC_TUN_MAX 0x48
dprintk("%s\n", __FUNCTION__);
result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
- msleep(1);
+ msleep(20);
return result;
}
static int tda10046h_set_bandwidth(struct tda1004x_state *state,
fe_bandwidth_t bandwidth)
{
- static u8 bandwidth_6mhz[] = { 0x80, 0x15, 0xfe, 0xab, 0x8e };
- static u8 bandwidth_7mhz[] = { 0x6e, 0x02, 0x53, 0xc8, 0x25 };
- static u8 bandwidth_8mhz[] = { 0x60, 0x12, 0xa8, 0xe4, 0xbd };
-
+ static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };
+ static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };
+ static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };
+
+ static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };
+ static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };
+ static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };
+ int tda10046_clk53m;
+
+ if ((state->config->if_freq == TDA10046_FREQ_045) ||
+ (state->config->if_freq == TDA10046_FREQ_052))
+ tda10046_clk53m = 0;
+ else
+ tda10046_clk53m = 1;
switch (bandwidth) {
case BANDWIDTH_6_MHZ:
- tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz, sizeof(bandwidth_6mhz));
+ if (tda10046_clk53m)
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
+ sizeof(bandwidth_6mhz_53M));
+ else
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
+ sizeof(bandwidth_6mhz_48M));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
+ }
break;
case BANDWIDTH_7_MHZ:
- tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz, sizeof(bandwidth_7mhz));
+ if (tda10046_clk53m)
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
+ sizeof(bandwidth_7mhz_53M));
+ else
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
+ sizeof(bandwidth_7mhz_48M));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
+ }
break;
case BANDWIDTH_8_MHZ:
- tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz, sizeof(bandwidth_8mhz));
+ if (tda10046_clk53m)
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
+ sizeof(bandwidth_8mhz_53M));
+ else
+ tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
+ sizeof(bandwidth_8mhz_48M));
+ if (state->config->if_freq == TDA10046_FREQ_045) {
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);
+ }
break;
default:
memcpy(buf + 1, mem + pos, tx_size);
fw_msg.len = tx_size + 1;
if (i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
- printk("tda1004x: Error during firmware upload\n");
+ printk(KERN_ERR "tda1004x: Error during firmware upload\n");
return -EIO;
}
pos += tx_size;
dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos);
}
+ // give the DSP a chance to settle 03/10/05 Hac
+ msleep(100);
return 0;
}
-static int tda1004x_check_upload_ok(struct tda1004x_state *state, u8 dspVersion)
+static int tda1004x_check_upload_ok(struct tda1004x_state *state)
{
u8 data1, data2;
+ unsigned long timeout;
+
+ if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
+ timeout = jiffies + 2 * HZ;
+ while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
+ if (time_after(jiffies, timeout)) {
+ printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");
+ break;
+ }
+ msleep(1);
+ }
+ } else
+ msleep(100);
// check upload was OK
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP
data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
- if ((data1 != 0x67) || (data2 != dspVersion))
+ if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) {
+ printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);
return -EIO;
-
+ }
+ printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);
return 0;
}
const struct firmware *fw;
/* don't re-upload unless necessary */
- if (tda1004x_check_upload_ok(state, 0x2c) == 0)
+ if (tda1004x_check_upload_ok(state) == 0)
return 0;
/* request the firmware, this will block until someone uploads it */
- printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
+ printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
if (ret) {
- printk("tda1004x: no firmware upload (timeout or file not found?)\n");
+ printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
return ret;
}
tda10045h_set_bandwidth(state, BANDWIDTH_8_MHZ);
ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN);
+ release_firmware(fw);
if (ret)
return ret;
- printk("tda1004x: firmware upload complete\n");
+ printk(KERN_INFO "tda1004x: firmware upload complete\n");
/* wait for DSP to initialise */
/* DSPREADY doesn't seem to work on the TDA10045H */
msleep(100);
- return tda1004x_check_upload_ok(state, 0x2c);
+ return tda1004x_check_upload_ok(state);
}
-static int tda10046_get_fw_version(struct tda1004x_state *state,
- const struct firmware *fw)
+static void tda10046_init_plls(struct dvb_frontend* fe)
{
- const unsigned char pattern[] = { 0x67, 0x00, 0x50, 0x62, 0x5e, 0x18, 0x67 };
- unsigned int i;
-
- /* area guessed from firmware v20, v21 and v25 */
- for (i = 0x660; i < 0x700; i++) {
- if (!memcmp(&fw->data[i], pattern, sizeof(pattern))) {
- state->fw_version = fw->data[i + sizeof(pattern)];
- printk(KERN_INFO "tda1004x: using firmware v%02x\n",
- state->fw_version);
- return 0;
- }
- }
+ struct tda1004x_state* state = fe->demodulator_priv;
+ int tda10046_clk53m;
- return -EINVAL;
+ if ((state->config->if_freq == TDA10046_FREQ_045) ||
+ (state->config->if_freq == TDA10046_FREQ_052))
+ tda10046_clk53m = 0;
+ else
+ tda10046_clk53m = 1;
+
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
+ if(tda10046_clk53m) {
+ printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8
+ } else {
+ printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3
+ }
+ if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
+ dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__);
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
+ } else {
+ dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __FUNCTION__);
+ tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3
+ }
+ if(tda10046_clk53m)
+ tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);
+ else
+ tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);
+ /* Note clock frequency is handled implicitly */
+ switch (state->config->if_freq) {
+ case TDA10046_FREQ_045:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
+ break;
+ case TDA10046_FREQ_052:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);
+ break;
+ case TDA10046_FREQ_3617:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);
+ break;
+ case TDA10046_FREQ_3613:
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
+ tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);
+ break;
+ }
+ tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz
+ /* let the PLLs settle */
+ msleep(120);
}
static int tda10046_fwupload(struct dvb_frontend* fe)
{
struct tda1004x_state* state = fe->demodulator_priv;
- unsigned long timeout;
int ret;
const struct firmware *fw;
/* reset + wake up chip */
- tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 0);
+ if (state->config->xtal_freq == TDA10046_XTAL_4M) {
+ tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
+ } else {
+ dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __FUNCTION__);
+ tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80);
+ }
tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
- msleep(100);
+ /* let the clocks recover from sleep */
+ msleep(5);
+
+ /* The PLLs need to be reprogrammed after sleep */
+ tda10046_init_plls(fe);
/* don't re-upload unless necessary */
- if (tda1004x_check_upload_ok(state, state->fw_version) == 0)
+ if (tda1004x_check_upload_ok(state) == 0)
return 0;
- /* request the firmware, this will block until someone uploads it */
- printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10046_DEFAULT_FIRMWARE);
- ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
- if (ret) {
- printk("tda1004x: no firmware upload (timeout or file not found?)\n");
- return ret;
- }
-
- if (fw->size < 24478) { /* size of firmware v20, which is the smallest of v20, v21 and v25 */
- printk("tda1004x: firmware file seems to be too small (%d bytes)\n", fw->size);
- return -EINVAL;
- }
-
- ret = tda10046_get_fw_version(state, fw);
- if (ret < 0) {
- printk("tda1004x: unable to find firmware version\n");
- return ret;
- }
-
- /* set parameters */
- tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10);
- tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c);
- tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99);
- tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4);
- tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c);
- tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
-
- ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
- if (ret)
- return ret;
- printk("tda1004x: firmware upload complete\n");
-
- /* wait for DSP to initialise */
- timeout = jiffies + HZ;
- while (!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
- if (time_after(jiffies, timeout)) {
- printk("tda1004x: DSP failed to initialised.\n");
- return -EIO;
+ if (state->config->request_firmware != NULL) {
+ /* request the firmware, this will block until someone uploads it */
+ printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
+ ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
+ if (ret) {
+ printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
+ return ret;
}
- msleep(1);
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
+ ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
+ release_firmware(fw);
+ if (ret)
+ return ret;
+ } else {
+ /* boot from firmware eeprom */
+ printk(KERN_INFO "tda1004x: booting from eeprom\n");
+ tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4);
+ msleep(300);
}
-
- return tda1004x_check_upload_ok(state, state->fw_version);
+ return tda1004x_check_upload_ok(state);
}
static int tda1004x_encode_fec(int fec)
return -1;
}
-int tda1004x_write_byte(struct dvb_frontend* fe, int reg, int data)
+int tda1004x_write(struct dvb_frontend* fe, u8 *buf, int len)
{
struct tda1004x_state* state = fe->demodulator_priv;
- return tda1004x_write_byteI(state, reg, data);
+ if (len != 2)
+ return -EINVAL;
+
+ return tda1004x_write_byteI(state, buf[0], buf[1]);
}
static int tda10045_init(struct dvb_frontend* fe)
dprintk("%s\n", __FUNCTION__);
- if (state->initialised)
- return 0;
-
if (tda10045_fwupload(fe)) {
printk("tda1004x: firmware upload failed\n");
return -EIO;
tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC
- // Init the PLL
- if (state->config->pll_init) {
- tda1004x_enable_tuner_i2c(state);
- state->config->pll_init(fe);
- tda1004x_disable_tuner_i2c(state);
- }
-
// tda setup
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk);
- state->initialised = 1;
return 0;
}
struct tda1004x_state* state = fe->demodulator_priv;
dprintk("%s\n", __FUNCTION__);
- if (state->initialised)
- return 0;
-
if (tda10046_fwupload(fe)) {
printk("tda1004x: firmware upload failed\n");
- return -EIO;
- }
-
- tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 0); // wake up the chip
-
- // Init the PLL
- if (state->config->pll_init) {
- tda1004x_enable_tuner_i2c(state);
- state->config->pll_init(fe);
- tda1004x_disable_tuner_i2c(state);
+ return -EIO;
}
// tda setup
tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
- tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0x40);
- tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
- tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0); // disable pulse killer
- tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10
- tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); // PLL P = N = 0
- tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); // FREQOFFS = 99
- tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); // } PHY2 = -11221
- tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); // }
- tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0); // AGC setup
- tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x60, 0x60); // set AGC polarities
+ tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87); // 100 ppm crystal, select HP stream
+ tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88); // enable pulse killer
+
+ switch (state->config->agc_config) {
+ case TDA10046_AGC_DEFAULT:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+ break;
+ case TDA10046_AGC_IFO_AUTO_NEG:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+ break;
+ case TDA10046_AGC_IFO_AUTO_POS:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
+ break;
+ case TDA10046_AGC_TDA827X_GP11:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
+ break;
+ case TDA10046_AGC_TDA827X_GP00:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+ break;
+ case TDA10046_AGC_TDA827X_GP01:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities
+ break;
+ }
+ tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
+ tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // }
tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // }
tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // }
- tda1004x_write_mask(state, TDA10046H_CVBER_CTRL, 0x30, 0x10); // 10^6 VBER measurement bits
- tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 1); // IF gain 2, TUN gain 1
- tda1004x_write_mask(state, TDA1004X_AUTO, 0x80, 0); // crystal is 50ppm
+ tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1
+ tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
- tda1004x_write_mask(state, TDA1004X_CONF_TS2, 0x31, 0); // MPEG2 interface config
- tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0x9e, 0); // disable AGC_TUN
- tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0xe1); // tristate setup
- tda1004x_write_byteI(state, TDA10046H_GPIO_OUT_SEL, 0xcc); // GPIO output config
- tda1004x_write_mask(state, TDA10046H_GPIO_SELECT, 8, 8); // GPIO select
- tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz
-
+ tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
+ // tda1004x_write_mask(state, 0x50, 0x80, 0x80); // handle out of guard echoes
tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
- state->initialised = 1;
return 0;
}
}
// set frequency
- tda1004x_enable_tuner_i2c(state);
- state->config->pll_set(fe, fe_params);
- tda1004x_disable_tuner_i2c(state);
-
- if (state->demod_type == TDA1004X_DEMOD_TDA10046)
- tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 4);
+ if (fe->ops.tuner_ops.set_params) {
+ fe->ops.tuner_ops.set_params(fe, fe_params);
+ if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
+ }
// Hardcoded to use auto as much as possible on the TDA10045 as it
// is very unreliable if AUTO mode is _not_ used.
// Set standard params.. or put them to auto
if ((fe_params->u.ofdm.code_rate_HP == FEC_AUTO) ||
- (fe_params->u.ofdm.code_rate_LP == FEC_AUTO) ||
- (fe_params->u.ofdm.constellation == QAM_AUTO) ||
- (fe_params->u.ofdm.hierarchy_information == HIERARCHY_AUTO)) {
+ (fe_params->u.ofdm.code_rate_LP == FEC_AUTO) ||
+ (fe_params->u.ofdm.constellation == QAM_AUTO) ||
+ (fe_params->u.ofdm.hierarchy_information == HIERARCHY_AUTO)) {
tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1); // enable auto
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); // turn off constellation bits
tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits
case TDA1004X_DEMOD_TDA10046:
tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
+ msleep(1);
+ tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);
break;
}
static int tda1004x_get_fe(struct dvb_frontend* fe, struct dvb_frontend_parameters *fe_params)
{
struct tda1004x_state* state = fe->demodulator_priv;
+
dprintk("%s\n", __FUNCTION__);
// inversion status
break;
}
break;
-
case TDA1004X_DEMOD_TDA10046:
switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {
- case 0x60:
+ case 0x5c:
+ case 0x54:
fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
break;
- case 0x6e:
+ case 0x6a:
+ case 0x60:
fe_params->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
break;
- case 0x80:
+ case 0x7b:
+ case 0x70:
fe_params->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
break;
}
if (status == -1)
return -EIO;
cber |= (status << 8);
+ // The address 0x20 should be read to cope with a TDA10046 bug
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
if (cber != 65535)
status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
if (status == -1)
return -EIO;
- vber |= ((status << 16) & 0x0f);
+ vber |= (status & 0x0f) << 16;
+ // The CVBER_LUT should be read to cope with TDA10046 hardware bug
tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
// if RS has passed some valid TS packets, then we must be
tmp = tda1004x_read_byte(state, TDA1004X_SNR);
if (tmp < 0)
return -EIO;
- if (tmp)
- tmp = 255 - tmp;
+ tmp = 255 - tmp;
*snr = ((tmp << 8) | tmp);
dprintk("%s: snr=0x%x\n", __FUNCTION__, *snr);
if (tmp < 0)
return -EIO;
*ber |= (tmp << 9);
+ // The address 0x20 should be read to cope with a TDA10046 bug
tda1004x_read_byte(state, TDA1004X_CBER_RESET);
dprintk("%s: ber=0x%x\n", __FUNCTION__, *ber);
break;
case TDA1004X_DEMOD_TDA10046:
+ /* set outputs to tristate */
+ tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
break;
}
- state->initialised = 0;
return 0;
}
+static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
+{
+ struct tda1004x_state* state = fe->demodulator_priv;
+
+ if (enable) {
+ return tda1004x_enable_tuner_i2c(state);
+ } else {
+ return tda1004x_disable_tuner_i2c(state);
+ }
+}
+
static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
fesettings->min_delay_ms = 800;
- fesettings->step_size = 166667;
- fesettings->max_drift = 166667*2;
+ /* Drift compensation makes no sense for DVB-T */
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
return 0;
}
.init = tda10045_init,
.sleep = tda1004x_sleep,
+ .write = tda1004x_write,
+ .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
.set_frontend = tda1004x_set_fe,
.get_frontend = tda1004x_get_fe,
/* setup the state */
state->config = config;
state->i2c = i2c;
- memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
- state->initialised = 0;
state->demod_type = TDA1004X_DEMOD_TDA10045;
/* check if the demod is there */
}
/* create dvb_frontend */
- state->frontend.ops = &state->ops;
+ memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
return &state->frontend;
}
.init = tda10046_init,
.sleep = tda1004x_sleep,
+ .write = tda1004x_write,
+ .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
.set_frontend = tda1004x_set_fe,
.get_frontend = tda1004x_get_fe,
/* setup the state */
state->config = config;
state->i2c = i2c;
- memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
- state->initialised = 0;
state->demod_type = TDA1004X_DEMOD_TDA10046;
- state->fw_version = 0x20; /* dummy default value */
/* check if the demod is there */
if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
}
/* create dvb_frontend */
- state->frontend.ops = &state->ops;
+ memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
return &state->frontend;
}
EXPORT_SYMBOL(tda10045_attach);
EXPORT_SYMBOL(tda10046_attach);
-EXPORT_SYMBOL(tda1004x_write_byte);
git://git.onelab.eu / linux-2.6.git / blobdiff