#include "stv0299.h"
#include "tda10021.h"
#include "tda1004x.h"
+#include "tua6100.h"
#include "dvb-pll.h"
#include <media/saa7146_vv.h>
#include <linux/module.h>
/* set tda10021 back to original clock configuration on reset */
if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
budget_av->tda10021_ts_enabled = 0;
}
/* set tda10021 back to original clock configuration when cam removed */
if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
budget_av->tda10021_ts_enabled = 0;
}
return 0;
/* tda10021 seems to need a different TS clock config when data is routed to the CAM */
if (budget_av->tda10021_poclkp) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1);
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1);
budget_av->tda10021_ts_enabled = 1;
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
/* Enable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
/* register CI interface */
budget_av->ca.owner = THIS_MODULE;
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
dvb_ca_en50221_release(&budget_av->ca);
/* disable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
return 0;
}
-#define MIN2(a,b) ((a) < (b) ? (a) : (b))
-#define MIN3(a,b,c) MIN2(MIN2(a,b),c)
-
-static int philips_su1278sh2_tua6100_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
-{
- u8 reg0 [2] = { 0x00, 0x00 };
- u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 };
- u8 reg2 [3] = { 0x02, 0x00, 0x00 };
- int _fband;
- int first_ZF;
- int R, A, N, P, M;
- struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 };
- int freq = params->frequency;
- struct budget *budget = (struct budget *) fe->dvb->priv;
-
- first_ZF = (freq) / 1000;
-
- if (abs(MIN2(abs(first_ZF-1190),abs(first_ZF-1790))) <
- abs(MIN3(abs(first_ZF-1202),abs(first_ZF-1542),abs(first_ZF-1890))))
- _fband = 2;
- else
- _fband = 3;
-
- if (_fband == 2) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1430) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1430)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- }
-
- if(_fband == 3) {
- if (((first_ZF >= 950) && (first_ZF < 1350)) ||
- ((first_ZF >= 1455) && (first_ZF < 1950)))
- reg0[1] = 0x07;
- else if (((first_ZF >= 1350) && (first_ZF < 1420)) ||
- ((first_ZF >= 1950) && (first_ZF < 2150)))
- reg0[1] = 0x0B;
- else if ((first_ZF >= 1420) && (first_ZF < 1455))
- reg0[1] = 0x0F;
- }
-
- if (first_ZF > 1525)
- reg1[1] |= 0x80;
- else
- reg1[1] &= 0x7F;
-
- if (_fband == 2) {
- if (first_ZF > 1430) { /* 1430MHZ */
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
-
- if (_fband == 3) {
- if ((first_ZF >= 1455) &&
- (first_ZF < 1630)) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- } else {
- if (first_ZF < 1455) {
- reg1[1] &= 0xCF; /* N2 */
- reg1[1] |= 0x20;
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- } else {
- if (first_ZF >= 1630) {
- reg1[1] &= 0xCF; /* N2 */
- reg2[1] &= 0xCF; /* R2 */
- reg2[1] |= 0x10;
- }
- }
- }
- }
-
- /* set ports, enable P0 for symbol rates > 4Ms/s */
- if (params->u.qpsk.symbol_rate >= 4000000)
- reg1[1] |= 0x0c;
- else
- reg1[1] |= 0x04;
-
- reg2[1] |= 0x0c;
-
- R = 64;
- A = 64;
- P = 64; //32
-
- M = (freq * R) / 4; /* in Mhz */
- N = (M - A * 1000) / (P * 1000);
-
- reg1[1] |= (N >> 9) & 0x03;
- reg1[2] = (N >> 1) & 0xff;
- reg1[3] = (N << 7) & 0x80;
-
- reg2[1] |= (R >> 8) & 0x03;
- reg2[2] = R & 0xFF; /* R */
-
- reg1[3] |= A & 0x7f; /* A */
-
- if (P == 64)
- reg1[1] |= 0x40; /* Prescaler 64/65 */
-
- reg0[1] |= 0x03;
-
- /* already enabled - do not reenable i2c repeater or TX fails */
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- msg.buf = reg0;
- msg.len = sizeof(reg0);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- msg.buf = reg1;
- msg.len = sizeof(reg1);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- msg.buf = reg2;
- msg.len = sizeof(reg2);
- if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
-
- return 0;
-}
-
static u8 typhoon_cinergy1200s_inittab[] = {
0x01, 0x15,
0x02, 0x30,
.demod_address = 0x0c,
};
+static struct tda10021_config philips_cu1216_config_altaddress = {
+ .demod_address = 0x0d,
+};
+
return -EINVAL;
rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
- params->frequency, 0);
+ params->frequency, 0);
if(rc < 0) return rc;
if (fe->ops.i2c_gate_ctrl)
#define SUBID_DVBS_TV_STAR_CI 0x0016
#define SUBID_DVBS_EASYWATCH_1 0x001a
#define SUBID_DVBS_EASYWATCH 0x001e
+#define SUBID_DVBC_EASYWATCH 0x002a
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_CINERGY1200 0x1156
result = budget_av->tda10021_set_frontend(fe, p);
if (budget_av->tda10021_ts_enabled) {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa1);
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1);
} else {
- tda10021_write_byte(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
}
return result;
/* Enable / PowerON Frontend */
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ /* Wait for PowerON */
+ msleep(100);
+
/* additional setup necessary for the PLUS cards */
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBC_EASYWATCH:
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
}
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1:
+ case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_EASYWATCH_1:
if (saa->pci->subsystem_vendor == 0x1894) {
- fe = stv0299_attach(&cinergy_1200s_1894_0010_config,
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
&budget_av->budget.i2c_adap);
if (fe) {
- fe->ops.tuner_ops.set_params = philips_su1278sh2_tua6100_tuner_set_params;
+ dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
}
} else {
- fe = stv0299_attach(&typhoon_config,
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
case SUBID_DVBS_TV_STAR_CI:
case SUBID_DVBS_CYNERGY1200N:
case SUBID_DVBS_EASYWATCH:
- fe = stv0299_attach(&philips_sd1878_config,
+ fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.set_params = philips_sd1878_tda8261_tuner_set_params;
}
break;
- case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBS_TYPHOON:
- fe = stv0299_attach(&typhoon_config,
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
break;
case SUBID_DVBS_CINERGY1200:
- fe = stv0299_attach(&cinergy_1200s_config,
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
break;
case SUBID_DVBC_KNC1:
- budget_av->reinitialise_demod = 1;
- fe = tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap,
- read_pwm(budget_av));
- if (fe) {
- fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
- }
- break;
-
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
budget_av->reinitialise_demod = 1;
- fe = tda10021_attach(&philips_cu1216_config,
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
+ if (fe == NULL)
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
if (fe) {
budget_av->tda10021_poclkp = 1;
budget_av->tda10021_set_frontend = fe->ops.set_frontend;
case SUBID_DVBT_KNC1_PLUS:
case SUBID_DVBT_CINERGY1200:
budget_av->reinitialise_demod = 1;
- fe = tda10046_attach(&philips_tu1216_config,
+ fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
&budget_av->budget.i2c_adap);
if (fe) {
fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
budget_av->budget.dvb_frontend)) {
printk(KERN_ERR "budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops.release)
- budget_av->budget.dvb_frontend->ops.release(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
budget_av->budget.dvb_frontend = NULL;
}
}
if (budget_av->budget.ci_present)
ciintf_deinit(budget_av);
- if (budget_av->budget.dvb_frontend != NULL)
+ if (budget_av->budget.dvb_frontend != NULL) {
dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ }
err = ttpci_budget_deinit(&budget_av->budget);
kfree(budget_av);
MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
static struct saa7146_extension budget_extension = {
.name = "budget_av",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.pci_tbl = pci_tbl,
git://git.onelab.eu / linux-2.6.git / blobdiff