#include "stv0299.h"
#include "tda10021.h"
#include "tda1004x.h"
+#include "tua6100.h"
+#include "dvb-pll.h"
#include <media/saa7146_vv.h>
#include <linux/module.h>
#include <linux/errno.h>
#define DEBICICAM 0x02420000
+#define SLOTSTATUS_NONE 1
+#define SLOTSTATUS_PRESENT 2
+#define SLOTSTATUS_RESET 4
+#define SLOTSTATUS_READY 8
+#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+
struct budget_av {
struct budget budget;
struct video_device *vd;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
struct dvb_ca_en50221 ca;
+ u8 reinitialise_demod:1;
+ u8 tda10021_poclkp:1;
+ u8 tda10021_ts_enabled;
+ int (*tda10021_set_frontend)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p);
};
-/* GPIO CI Connections:
- * 0 - Vcc/Reset (Reset is controlled by capacitor)
- * 1 - Attribute Memory
- * 2 - Card Enable (Active Low)
- * 3 - Card Detect
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
+
+
+/* GPIO Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
+ * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
+ * 2 - CI Card Enable (Active Low)
+ * 3 - CI Card Detect
*/
/****************************************************************************
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
udelay(1);
- result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 1\n");
+ }
return result;
}
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
udelay(1);
- result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 2\n");
+ }
return result;
}
udelay(1);
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 3\n");
+ return -ETIMEDOUT;
+ }
return result;
}
udelay(1);
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
-
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 5\n");
+ }
return result;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
- int timeout = 50; // 5 seconds (4.4.6 Ready)
if (slot != 0)
return -EINVAL;
dprintk(1, "ciintf_slot_reset\n");
+ budget_av->slot_status = SLOTSTATUS_RESET;
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
msleep(20); /* 20 ms Vcc settling time */
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+ ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ msleep(20);
- /* This should have been based on pin 16 READY of the pcmcia port,
- * but AFAICS it is not routed to the saa7146 */
- while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
- msleep(100);
+ /* reinitialise the frontend if necessary */
+ if (budget_av->reinitialise_demod)
+ dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
- if (timeout <= 0)
- {
- printk(KERN_ERR "budget-av: cam reset failed (timeout).\n");
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
- return -ETIMEDOUT;
+ /* set tda10021 back to original clock configuration on reset */
+ if (budget_av->tda10021_poclkp) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ budget_av->tda10021_ts_enabled = 0;
}
return 0;
dprintk(1, "ciintf_slot_shutdown\n");
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- budget_av->slot_status = 0;
+ budget_av->slot_status = SLOTSTATUS_NONE;
+
+ /* set tda10021 back to original clock configuration when cam removed */
+ if (budget_av->tda10021_poclkp) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ budget_av->tda10021_ts_enabled = 0;
+ }
return 0;
}
dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+
+ /* tda10021 seems to need a different TS clock config when data is routed to the CAM */
+ if (budget_av->tda10021_poclkp) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1);
+ budget_av->tda10021_ts_enabled = 1;
+ }
+
return 0;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
+ int result;
if (slot != 0)
return -EINVAL;
- if (!budget_av->slot_status) {
+ /* test the card detect line - needs to be done carefully
+ * since it never goes high for some CAMs on this interface (e.g. topuptv) */
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
udelay(1);
- if (saa7146_read(saa, PSR) & MASK_06)
- {
- printk(KERN_INFO "budget-av: cam inserted\n");
- budget_av->slot_status = 1;
+ if (saa7146_read(saa, PSR) & MASK_06) {
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ printk(KERN_INFO "budget-av: cam inserted A\n");
+ }
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
- } else if (!open) {
+ }
+
+ /* We also try and read from IO memory to work round the above detection bug. If
+ * there is no CAM, we will get a timeout. Only done if there is no cam
+ * present, since this test actually breaks some cams :(
+ *
+ * if the CI interface is not open, we also do the above test since we
+ * don't care if the cam has problems - we'll be resetting it on open() anyway */
+ if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
- {
- printk(KERN_INFO "budget-av: cam ejected\n");
- saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
+ if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ printk(KERN_INFO "budget-av: cam inserted B\n");
+ } else if (result < 0) {
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 5\n");
+ return 0;
+ }
}
}
- if (budget_av->slot_status == 1)
- return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ /* read from attribute memory in reset/ready state to know when the CAM is ready */
+ if (budget_av->slot_status == SLOTSTATUS_RESET) {
+ result = ciintf_read_attribute_mem(ca, slot, 0);
+ if (result == 0x1d) {
+ budget_av->slot_status = SLOTSTATUS_READY;
+ }
+ }
+ /* work out correct return code */
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ if (budget_av->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
return 0;
}
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
/* Enable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
/* register CI interface */
budget_av->ca.owner = THIS_MODULE;
budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
budget_av->ca.data = budget_av;
+ budget_av->budget.ci_present = 1;
+ budget_av->slot_status = SLOTSTATUS_NONE;
if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
&budget_av->ca, 0, 1)) != 0) {
}
printk(KERN_INFO "budget-av: ci interface initialised.\n");
- budget_av->budget.ci_present = 1;
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
dvb_ca_en50221_release(&budget_av->ca);
/* disable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
return 0;
}
-static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
+static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
{
- struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv;
u32 div;
u8 buf[4];
+ struct budget *budget = (struct budget *) fe->dvb->priv;
struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
if ((params->frequency < 950000) || (params->frequency > 2150000))
else if (params->frequency < 2150000)
buf[3] |= 0xC0;
- if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1)
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
0x10, 0x3f, // AGC2 0x3d
0x11, 0x84,
- 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x12, 0xb9,
0x15, 0xc9, // lock detector threshold
0x16, 0x00,
0x17, 0x00,
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
- .enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
};
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
- .enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
};
+static struct stv0299_config cinergy_1200s_1894_0010_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
-static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
u8 buf[4];
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
- buf[2] = 0x8e;
- buf[3] = (params->frequency < 174500000 ? 0xa1 :
- params->frequency < 454000000 ? 0x92 : 0x34);
+ buf[2] = 0x86;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
static struct tda10021_config philips_cu1216_config = {
.demod_address = 0x0c,
- .pll_set = philips_cu1216_pll_set,
+};
+
+static struct tda10021_config philips_cu1216_config_altaddress = {
+ .demod_address = 0x0d,
};
-static int philips_tu1216_pll_init(struct dvb_frontend *fe)
+static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
// setup PLL configuration
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
msleep(1);
return 0;
}
-static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
u8 tuner_buf[4];
tuner_buf[2] = 0xca;
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
.demod_address = 0x8,
.invert = 1,
.invert_oclk = 1,
- .pll_init = philips_tu1216_pll_init,
- .pll_set = philips_tu1216_pll_set,
+ .xtal_freq = TDA10046_XTAL_4M,
+ .agc_config = TDA10046_AGC_DEFAULT,
+ .if_freq = TDA10046_FREQ_3617,
.request_firmware = philips_tu1216_request_firmware,
};
+static u8 philips_sd1878_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d,
+ 0x05, 0x35,
+ 0x06, 0x40,
+ 0x07, 0x00,
+ 0x08, 0x43,
+ 0x09, 0x02,
+ 0x0C, 0x51,
+ 0x0D, 0x82,
+ 0x0E, 0x23,
+ 0x10, 0x3f,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9,
+ 0x16, 0x19,
+ 0x17, 0x8c,
+ 0x18, 0x59,
+ 0x19, 0xf8,
+ 0x1a, 0xfe,
+ 0x1c, 0x7f,
+ 0x1d, 0x00,
+ 0x1e, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x09,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x93,
+ 0xff, 0xff
+};
+
+static int philips_sd1878_tda8261_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ u8 buf[4];
+ int rc;
+ struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)};
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+ if((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
+ params->frequency, 0);
+ if(rc < 0) return rc;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if(i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+ u8 m1;
+
+ aclk = 0xb5;
+ if (srate < 2000000)
+ bclk = 0x86;
+ else if (srate < 5000000)
+ bclk = 0x89;
+ else if (srate < 15000000)
+ bclk = 0x8f;
+ else if (srate < 45000000)
+ bclk = 0x95;
+
+ m1 = 0x14;
+ if (srate < 4000000)
+ m1 = 0x10;
+
+ stv0299_writereg(fe, 0x0e, 0x23);
+ stv0299_writereg(fe, 0x0f, 0x94);
+ stv0299_writereg(fe, 0x10, 0x39);
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x15, 0xc9);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+ stv0299_writereg(fe, 0x0f, 0x80 | m1);
+
+ return 0;
+}
+
+static struct stv0299_config philips_sd1878_config = {
+ .demod_address = 0x68,
+ .inittab = philips_sd1878_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
+};
static u8 read_pwm(struct budget_av *budget_av)
{
#define SUBID_DVBS_KNC1_PLUS 0x0011
#define SUBID_DVBS_TYPHOON 0x4f56
#define SUBID_DVBS_CINERGY1200 0x1154
+#define SUBID_DVBS_CYNERGY1200N 0x1155
+#define SUBID_DVBS_TV_STAR 0x0014
+#define SUBID_DVBS_TV_STAR_CI 0x0016
+#define SUBID_DVBS_EASYWATCH_1 0x001a
+#define SUBID_DVBS_EASYWATCH 0x001e
+#define SUBID_DVBC_EASYWATCH 0x002a
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_CINERGY1200 0x1156
#define SUBID_DVBT_KNC1 0x0030
#define SUBID_DVBT_CINERGY1200 0x1157
+
+static int tda10021_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct budget_av* budget_av = fe->dvb->priv;
+ int result;
+
+ result = budget_av->tda10021_set_frontend(fe, p);
+ if (budget_av->tda10021_ts_enabled) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1);
+ } else {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ }
+
+ return result;
+}
+
static void frontend_init(struct budget_av *budget_av)
{
struct saa7146_dev * saa = budget_av->budget.dev;
struct dvb_frontend * fe = NULL;
+ /* Enable / PowerON Frontend */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+
+ /* Wait for PowerON */
+ msleep(100);
+
+ /* additional setup necessary for the PLUS cards */
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBT_KNC1_PLUS:
- // Enable / PowerON Frontend
+ case SUBID_DVBC_EASYWATCH:
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
}
case SUBID_DVBS_KNC1:
case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBS_EASYWATCH_1:
+ if (saa->pci->subsystem_vendor == 0x1894) {
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
+ }
+ } else {
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
+ }
+ break;
+
+ case SUBID_DVBS_TV_STAR:
+ case SUBID_DVBS_TV_STAR_CI:
+ case SUBID_DVBS_CYNERGY1200N:
+ case SUBID_DVBS_EASYWATCH:
+ fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_sd1878_tda8261_tuner_set_params;
+ }
+ break;
+
case SUBID_DVBS_TYPHOON:
- fe = stv0299_attach(&typhoon_config,
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
break;
case SUBID_DVBS_CINERGY1200:
- fe = stv0299_attach(&cinergy_1200s_config,
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
break;
case SUBID_DVBC_KNC1:
case SUBID_DVBC_KNC1_PLUS:
- fe = tda10021_attach(&philips_cu1216_config,
+ case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
+ budget_av->reinitialise_demod = 1;
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
+ if (fe == NULL)
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe) {
+ budget_av->tda10021_poclkp = 1;
+ budget_av->tda10021_set_frontend = fe->ops.set_frontend;
+ fe->ops.set_frontend = tda10021_set_frontend;
+ fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+ }
break;
case SUBID_DVBT_KNC1:
case SUBID_DVBT_KNC1_PLUS:
- fe = tda10046_attach(&philips_tu1216_config,
- &budget_av->budget.i2c_adap);
- break;
-
- case SUBID_DVBC_CINERGY1200:
- fe = tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap,
- read_pwm(budget_av));
- break;
-
case SUBID_DVBT_CINERGY1200:
- fe = tda10046_attach(&philips_tu1216_config,
+ budget_av->reinitialise_demod = 1;
+ fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
&budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
+ fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
+ }
break;
}
if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
budget_av->budget.dvb_frontend)) {
printk(KERN_ERR "budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops->release)
- budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
budget_av->budget.dvb_frontend = NULL;
}
}
if (budget_av->budget.ci_present)
ciintf_deinit(budget_av);
- if (budget_av->budget.dvb_frontend != NULL)
+ if (budget_av->budget.dvb_frontend != NULL) {
dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ }
err = ttpci_budget_deinit(&budget_av->budget);
kfree(budget_av);
dprintk(2, "dev: %p\n", dev);
- if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
+ if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
return -ENOMEM;
- memset(budget_av, 0, sizeof(struct budget_av));
-
budget_av->has_saa7113 = 0;
budget_av->budget.ci_present = 0;
SAA7146_HPS_SYNC_PORT_A);
saa7113_setinput(budget_av, 0);
- } else {
- ciintf_init(budget_av);
}
/* fixme: find some sane values here... */
budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
+ ciintf_init(budget_av);
+
+ ttpci_budget_init_hooks(&budget_av->budget);
return 0;
}
MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
+ MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
+ MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
+ MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
+ MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
{
MODULE_DEVICE_TABLE(pci, pci_tbl);
static struct saa7146_extension budget_extension = {
- .name = "budget dvb /w video in\0",
+ .name = "budget_av",
+ .flags = SAA7146_USE_I2C_IRQ,
+
.pci_tbl = pci_tbl,
.module = THIS_MODULE,
git://git.onelab.eu / linux-2.6.git / blobdiff