/*
* budget-av.c: driver for the SAA7146 based Budget DVB cards
- * with analog video in
+ * with analog video in
*
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
*
* CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
* Andrew de Quincey <adq_dvb@lidskialf.net>
*
* Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
*
- * Copyright (C) 1999-2002 Ralph Metzler
+ * Copyright (C) 1999-2002 Ralph Metzler
* & Marcus Metzler for convergence integrated media GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
- *
+ *
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
+ *
*
* the project's page is at http://www.linuxtv.org/dvb/
*/
#include "stv0299.h"
#include "tda10021.h"
#include "tda1004x.h"
+#include "tua6100.h"
+#include "dvb-pll.h"
#include <media/saa7146_vv.h>
#include <linux/module.h>
#include <linux/errno.h>
#define DEBICICAM 0x02420000
+#define SLOTSTATUS_NONE 1
+#define SLOTSTATUS_PRESENT 2
+#define SLOTSTATUS_RESET 4
+#define SLOTSTATUS_READY 8
+#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+
struct budget_av {
struct budget budget;
struct video_device *vd;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
struct dvb_ca_en50221 ca;
+ u8 reinitialise_demod:1;
+ u8 tda10021_poclkp:1;
+ u8 tda10021_ts_enabled;
+ int (*tda10021_set_frontend)(struct dvb_frontend *fe, struct dvb_frontend_parameters *p);
};
-int enable_ci = 0;
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
+
+/* GPIO Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
+ * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
+ * 2 - CI Card Enable (Active Low)
+ * 3 - CI Card Detect
+ */
/****************************************************************************
* INITIALIZATION
****************************************************************************/
-
-static u8 i2c_readreg (struct i2c_adapter *i2c, u8 id, u8 reg)
+static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
{
- u8 mm1[] = {0x00};
- u8 mm2[] = {0x00};
+ u8 mm1[] = { 0x00 };
+ u8 mm2[] = { 0x00 };
struct i2c_msg msgs[2];
msgs[0].flags = 0;
msgs[1].flags = I2C_M_RD;
- msgs[0].addr = msgs[1].addr=id/2;
+ msgs[0].addr = msgs[1].addr = id / 2;
mm1[0] = reg;
msgs[0].len = 1;
msgs[1].len = 1;
return mm2[0];
}
-static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 *buf, u8 len)
+static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
{
- u8 mm1[] = { reg };
- struct i2c_msg msgs[2] = {
- { .addr = id/2, .flags = 0, .buf = mm1, .len = 1 },
- { .addr = id/2, .flags = I2C_M_RD, .buf = buf, .len = len }
+ u8 mm1[] = { reg };
+ struct i2c_msg msgs[2] = {
+ {.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
+ {.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
};
- if (i2c_transfer(i2c, msgs, 2) != 2)
+ if (i2c_transfer(i2c, msgs, 2) != 2)
return -EIO;
return 0;
}
-
-static int i2c_writereg (struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
+static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
{
- u8 msg[2]={ reg, val };
- struct i2c_msg msgs;
-
- msgs.flags=0;
- msgs.addr=id/2;
- msgs.len=2;
- msgs.buf=msg;
- return i2c_transfer(i2c, &msgs, 1);
+ u8 msg[2] = { reg, val };
+ struct i2c_msg msgs;
+
+ msgs.flags = 0;
+ msgs.addr = id / 2;
+ msgs.len = 2;
+ msgs.buf = msg;
+ return i2c_transfer(i2c, &msgs, 1);
}
static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
return -EINVAL;
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
- result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);
+ udelay(1);
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 1\n");
+ }
return result;
}
return -EINVAL;
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
- result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);
+ udelay(1);
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 2\n");
+ }
return result;
}
return -EINVAL;
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
+ udelay(1);
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
+ if ((result == -ETIMEDOUT) || ((result == 0xff) && ((address & 3) < 2))) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 3\n");
+ return -ETIMEDOUT;
+ }
return result;
}
return -EINVAL;
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
+ udelay(1);
- if (result == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
+ if (result == -ETIMEDOUT) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 5\n");
+ }
return result;
}
return -EINVAL;
dprintk(1, "ciintf_slot_reset\n");
+ budget_av->slot_status = SLOTSTATUS_RESET;
- /* reset the card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
- msleep(100);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
- msleep(2000); /* horrendous I know, but its the only way to be absolutely sure without an IRQ line! */
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+ msleep(2);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
+ msleep(20); /* 20 ms Vcc settling time */
+
+ saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+ msleep(20);
+
+ /* reinitialise the frontend if necessary */
+ if (budget_av->reinitialise_demod)
+ dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
+
+ /* set tda10021 back to original clock configuration on reset */
+ if (budget_av->tda10021_poclkp) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ budget_av->tda10021_ts_enabled = 0;
+ }
+
return 0;
}
dprintk(1, "ciintf_slot_shutdown\n");
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
- budget_av->slot_status = 0;
+ budget_av->slot_status = SLOTSTATUS_NONE;
+
+ /* set tda10021 back to original clock configuration when cam removed */
+ if (budget_av->tda10021_poclkp) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ budget_av->tda10021_ts_enabled = 0;
+ }
return 0;
}
dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+
+ /* tda10021 seems to need a different TS clock config when data is routed to the CAM */
+ if (budget_av->tda10021_poclkp) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1);
+ budget_av->tda10021_ts_enabled = 1;
+ }
+
return 0;
}
{
struct budget_av *budget_av = (struct budget_av *) ca->data;
struct saa7146_dev *saa = budget_av->budget.dev;
- int cam = 0;
+ int result;
if (slot != 0)
return -EINVAL;
- if (!budget_av->slot_status) {
+ /* test the card detect line - needs to be done carefully
+ * since it never goes high for some CAMs on this interface (e.g. topuptv) */
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
udelay(1);
- cam = saa7146_read(saa, PSR) & MASK_06;
+ if (saa7146_read(saa, PSR) & MASK_06) {
+ if (budget_av->slot_status == SLOTSTATUS_NONE) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ printk(KERN_INFO "budget-av: cam inserted A\n");
+ }
+ }
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+ }
- if (cam)
- budget_av->slot_status = 1;
- } else if (!open) {
+ /* We also try and read from IO memory to work round the above detection bug. If
+ * there is no CAM, we will get a timeout. Only done if there is no cam
+ * present, since this test actually breaks some cams :(
+ *
+ * if the CI interface is not open, we also do the above test since we
+ * don't care if the cam has problems - we'll be resetting it on open() anyway */
+ if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
- if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT)
- budget_av->slot_status = 0;
+ result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
+ if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
+ budget_av->slot_status = SLOTSTATUS_PRESENT;
+ printk(KERN_INFO "budget-av: cam inserted B\n");
+ } else if (result < 0) {
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ ciintf_slot_shutdown(ca, slot);
+ printk(KERN_INFO "budget-av: cam ejected 5\n");
+ return 0;
+ }
+ }
}
- if (budget_av->slot_status == 1)
- return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ /* read from attribute memory in reset/ready state to know when the CAM is ready */
+ if (budget_av->slot_status == SLOTSTATUS_RESET) {
+ result = ciintf_read_attribute_mem(ca, slot, 0);
+ if (result == 0x1d) {
+ budget_av->slot_status = SLOTSTATUS_READY;
+ }
+ }
+ /* work out correct return code */
+ if (budget_av->slot_status != SLOTSTATUS_NONE) {
+ if (budget_av->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
return 0;
}
memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
- /* setup GPIOs */
- saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
- /* Reset the card */
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
- msleep(50);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
- msleep(100);
-
/* Enable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
/* register CI interface */
budget_av->ca.owner = THIS_MODULE;
budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
budget_av->ca.data = budget_av;
- if ((result = dvb_ca_en50221_init(budget_av->budget.dvb_adapter,
+ budget_av->budget.ci_present = 1;
+ budget_av->slot_status = SLOTSTATUS_NONE;
+
+ if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
&budget_av->ca, 0, 1)) != 0) {
- printk("budget_av: CI interface detected, but initialisation failed.\n");
+ printk(KERN_ERR "budget-av: ci initialisation failed.\n");
goto error;
}
- // success!
- printk("ciintf_init: CI interface initialised\n");
- budget_av->budget.ci_present = 1;
+
+ printk(KERN_INFO "budget-av: ci interface initialised.\n");
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
dvb_ca_en50221_release(&budget_av->ca);
/* disable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
0x0c, 0x40,
0x0d, 0x00,
0x0e, 0x01,
- 0x0f, 0x44,
+ 0x0f, 0x44,
0x10, 0x08,
0x11, 0x0c,
0x12, 0x7b,
0x13, 0x00,
- 0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
+ 0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
- 0x57, 0xff,
- 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
- 0x5b, 0x83, 0x5e, 0x00,
- 0xff
+ 0x57, 0xff,
+ 0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
+ 0x5b, 0x83, 0x5e, 0x00,
+ 0xff
};
-
-static int saa7113_init (struct budget_av *budget_av)
+static int saa7113_init(struct budget_av *budget_av)
{
struct budget *budget = &budget_av->budget;
+ struct saa7146_dev *saa = budget->dev;
const u8 *data = saa7113_tab;
- if (i2c_writereg (&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
- dprintk(1, "saa7113 not found on KNC card\n");
- return -ENODEV;
- }
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+ msleep(200);
- dprintk(1, "saa7113 detected and initializing\n");
+ if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
+ dprintk(1, "saa7113 not found on KNC card\n");
+ return -ENODEV;
+ }
+
+ dprintk(1, "saa7113 detected and initializing\n");
while (*data != 0xff) {
- i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data+1));
- data += 2;
- }
+ i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
+ data += 2;
+ }
dprintk(1, "saa7113 status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
return 0;
}
-
-static int saa7113_setinput (struct budget_av *budget_av, int input)
+static int saa7113_setinput(struct budget_av *budget_av, int input)
{
struct budget *budget = &budget_av->budget;
- if ( 1 != budget_av->has_saa7113 )
+ if (1 != budget_av->has_saa7113)
return -ENODEV;
if (input == 1) {
return 0;
}
-static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
+static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
{
- struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv;
u32 div;
u8 buf[4];
+ struct budget *budget = (struct budget *) fe->dvb->priv;
struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
if ((params->frequency < 950000) || (params->frequency > 2150000))
else if (params->frequency < 2150000)
buf[3] |= 0xC0;
- if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1)
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
}
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
0x10, 0x3f, // AGC2 0x3d
0x11, 0x84,
- 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x12, 0xb9,
0x15, 0xc9, // lock detector threshold
0x16, 0x00,
0x17, 0x00,
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
- .enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
};
.inittab = typhoon_cinergy1200s_inittab,
.mclk = 88000000UL,
.invert = 0,
- .enhanced_tuning = 0,
.skip_reinit = 0,
.lock_output = STV0229_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
- .pll_set = philips_su1278_ty_ci_pll_set,
};
+static struct stv0299_config cinergy_1200s_1894_0010_config = {
+ .demod_address = 0x68,
+ .inittab = typhoon_cinergy1200s_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
-static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
u8 buf[4];
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
- buf[2] = 0x8e;
- buf[3] = (params->frequency < 174500000 ? 0xa1 :
- params->frequency < 454000000 ? 0x92 : 0x34);
+ buf[2] = 0x86;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
return -EIO;
return 0;
static struct tda10021_config philips_cu1216_config = {
.demod_address = 0x0c,
- .pll_set = philips_cu1216_pll_set,
+};
+
+static struct tda10021_config philips_cu1216_config_altaddress = {
+ .demod_address = 0x0d,
};
-static int philips_tu1216_pll_init(struct dvb_frontend *fe)
+static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
// setup PLL configuration
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
msleep(1);
return 0;
}
-static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct budget *budget = (struct budget *) fe->dvb->priv;
u8 tuner_buf[4];
tuner_buf[2] = 0xca;
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
return -EIO;
return request_firmware(fw, name, &budget->dev->pci->dev);
}
-struct tda1004x_config philips_tu1216_config = {
+static struct tda1004x_config philips_tu1216_config = {
.demod_address = 0x8,
.invert = 1,
.invert_oclk = 1,
- .pll_init = philips_tu1216_pll_init,
- .pll_set = philips_tu1216_pll_set,
+ .xtal_freq = TDA10046_XTAL_4M,
+ .agc_config = TDA10046_AGC_DEFAULT,
+ .if_freq = TDA10046_FREQ_3617,
.request_firmware = philips_tu1216_request_firmware,
};
+static u8 philips_sd1878_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d,
+ 0x05, 0x35,
+ 0x06, 0x40,
+ 0x07, 0x00,
+ 0x08, 0x43,
+ 0x09, 0x02,
+ 0x0C, 0x51,
+ 0x0D, 0x82,
+ 0x0E, 0x23,
+ 0x10, 0x3f,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9,
+ 0x16, 0x19,
+ 0x17, 0x8c,
+ 0x18, 0x59,
+ 0x19, 0xf8,
+ 0x1a, 0xfe,
+ 0x1c, 0x7f,
+ 0x1d, 0x00,
+ 0x1e, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x09,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x93,
+ 0xff, 0xff
+};
+
+static int philips_sd1878_tda8261_tuner_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ u8 buf[4];
+ int rc;
+ struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)};
+ struct budget *budget = (struct budget *) fe->dvb->priv;
+
+ if((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
+ params->frequency, 0);
+ if(rc < 0) return rc;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if(i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+ u8 m1;
+
+ aclk = 0xb5;
+ if (srate < 2000000)
+ bclk = 0x86;
+ else if (srate < 5000000)
+ bclk = 0x89;
+ else if (srate < 15000000)
+ bclk = 0x8f;
+ else if (srate < 45000000)
+ bclk = 0x95;
+
+ m1 = 0x14;
+ if (srate < 4000000)
+ m1 = 0x10;
+
+ stv0299_writereg(fe, 0x0e, 0x23);
+ stv0299_writereg(fe, 0x0f, 0x94);
+ stv0299_writereg(fe, 0x10, 0x39);
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x15, 0xc9);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+ stv0299_writereg(fe, 0x0f, 0x80 | m1);
+ return 0;
+}
+static struct stv0299_config philips_sd1878_config = {
+ .demod_address = 0x68,
+ .inittab = philips_sd1878_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
+};
static u8 read_pwm(struct budget_av *budget_av)
{
return pwm;
}
+#define SUBID_DVBS_KNC1 0x0010
+#define SUBID_DVBS_KNC1_PLUS 0x0011
+#define SUBID_DVBS_TYPHOON 0x4f56
+#define SUBID_DVBS_CINERGY1200 0x1154
+#define SUBID_DVBS_CYNERGY1200N 0x1155
+
+#define SUBID_DVBS_TV_STAR 0x0014
+#define SUBID_DVBS_TV_STAR_CI 0x0016
+#define SUBID_DVBS_EASYWATCH_1 0x001a
+#define SUBID_DVBS_EASYWATCH 0x001e
+#define SUBID_DVBC_EASYWATCH 0x002a
+#define SUBID_DVBC_KNC1 0x0020
+#define SUBID_DVBC_KNC1_PLUS 0x0021
+#define SUBID_DVBC_CINERGY1200 0x1156
+
+#define SUBID_DVBT_KNC1_PLUS 0x0031
+#define SUBID_DVBT_KNC1 0x0030
+#define SUBID_DVBT_CINERGY1200 0x1157
+
+
+static int tda10021_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct budget_av* budget_av = fe->dvb->priv;
+ int result;
+
+ result = budget_av->tda10021_set_frontend(fe, p);
+ if (budget_av->tda10021_ts_enabled) {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa1);
+ } else {
+ tda10021_writereg(budget_av->budget.dvb_frontend, 0x12, 0xa0);
+ }
+
+ return result;
+}
static void frontend_init(struct budget_av *budget_av)
{
- switch (budget_av->budget.dev->pci->subsystem_device) {
- case 0x4f56: // Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059))
- budget_av->budget.dvb_frontend =
- stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend != NULL) {
+ struct saa7146_dev * saa = budget_av->budget.dev;
+ struct dvb_frontend * fe = NULL;
+
+ /* Enable / PowerON Frontend */
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+
+ /* Wait for PowerON */
+ msleep(100);
+
+ /* additional setup necessary for the PLUS cards */
+ switch (saa->pci->subsystem_device) {
+ case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBC_KNC1_PLUS:
+ case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBC_EASYWATCH:
+ saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
+ }
+
+ switch (saa->pci->subsystem_device) {
+
+ case SUBID_DVBS_KNC1:
+ case SUBID_DVBS_KNC1_PLUS:
+ case SUBID_DVBS_EASYWATCH_1:
+ if (saa->pci->subsystem_vendor == 0x1894) {
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
+ }
+ } else {
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+ }
}
break;
- case 0x0020: // KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034))
- budget_av->budget.dvb_frontend =
- tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap, read_pwm(budget_av));
- if (budget_av->budget.dvb_frontend != NULL) {
- break;
+ case SUBID_DVBS_TV_STAR:
+ case SUBID_DVBS_TV_STAR_CI:
+ case SUBID_DVBS_CYNERGY1200N:
+ case SUBID_DVBS_EASYWATCH:
+ fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_sd1878_tda8261_tuner_set_params;
}
break;
- case 0x0030: // KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt))
- budget_av->budget.dvb_frontend =
- tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend != NULL) {
- break;
+ case SUBID_DVBS_TYPHOON:
+ fe = dvb_attach(stv0299_attach, &typhoon_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
}
break;
- case 0x1154: // TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059))
- budget_av->budget.dvb_frontend =
- stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend != NULL) {
- break;
+ case SUBID_DVBS_CINERGY1200:
+ fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
}
break;
- case 0x1156: // Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034))
- budget_av->budget.dvb_frontend =
- tda10021_attach(&philips_cu1216_config,
- &budget_av->budget.i2c_adap, read_pwm(budget_av));
- if (budget_av->budget.dvb_frontend) {
- break;
+ case SUBID_DVBC_KNC1:
+ case SUBID_DVBC_KNC1_PLUS:
+ case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
+ budget_av->reinitialise_demod = 1;
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe == NULL)
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
+ if (fe) {
+ budget_av->tda10021_poclkp = 1;
+ budget_av->tda10021_set_frontend = fe->ops.set_frontend;
+ fe->ops.set_frontend = tda10021_set_frontend;
+ fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
}
break;
- case 0x1157: // Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt))
- budget_av->budget.dvb_frontend =
- tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap);
- if (budget_av->budget.dvb_frontend) {
- break;
+ case SUBID_DVBT_KNC1:
+ case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBT_CINERGY1200:
+ budget_av->reinitialise_demod = 1;
+ fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
+ &budget_av->budget.i2c_adap);
+ if (fe) {
+ fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
+ fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
}
break;
}
- if (budget_av->budget.dvb_frontend == NULL) {
- printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
- budget_av->budget.dev->pci->vendor,
- budget_av->budget.dev->pci->device,
- budget_av->budget.dev->pci->subsystem_vendor,
- budget_av->budget.dev->pci->subsystem_device);
- } else {
- if (dvb_register_frontend
- (budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) {
- printk("budget-av: Frontend registration failed!\n");
- if (budget_av->budget.dvb_frontend->ops->release)
- budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend);
- budget_av->budget.dvb_frontend = NULL;
- }
+ if (fe == NULL) {
+ printk(KERN_ERR "budget-av: A frontend driver was not found "
+ "for device %04x/%04x subsystem %04x/%04x\n",
+ saa->pci->vendor,
+ saa->pci->device,
+ saa->pci->subsystem_vendor,
+ saa->pci->subsystem_device);
+ return;
+ }
+
+ budget_av->budget.dvb_frontend = fe;
+
+ if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
+ budget_av->budget.dvb_frontend)) {
+ printk(KERN_ERR "budget-av: Frontend registration failed!\n");
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ budget_av->budget.dvb_frontend = NULL;
}
}
ttpci_budget_irq10_handler(dev, isr);
}
-static int budget_av_detach (struct saa7146_dev *dev)
+static int budget_av_detach(struct saa7146_dev *dev)
{
- struct budget_av *budget_av = (struct budget_av*) dev->ext_priv;
+ struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
int err;
dprintk(2, "dev: %p\n", dev);
- if ( 1 == budget_av->has_saa7113 ) {
- saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+ if (1 == budget_av->has_saa7113) {
+ saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
msleep(200);
- saa7146_unregister_device (&budget_av->vd, dev);
+ saa7146_unregister_device(&budget_av->vd, dev);
}
if (budget_av->budget.ci_present)
ciintf_deinit(budget_av);
- if (budget_av->budget.dvb_frontend != NULL)
+ if (budget_av->budget.dvb_frontend != NULL) {
dvb_unregister_frontend(budget_av->budget.dvb_frontend);
- err = ttpci_budget_deinit (&budget_av->budget);
+ dvb_frontend_detach(budget_av->budget.dvb_frontend);
+ }
+ err = ttpci_budget_deinit(&budget_av->budget);
- kfree (budget_av);
+ kfree(budget_av);
return err;
}
dprintk(2, "dev: %p\n", dev);
- if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL)))
+ if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
return -ENOMEM;
- memset(budget_av, 0, sizeof(struct budget_av));
-
+ budget_av->has_saa7113 = 0;
budget_av->budget.ci_present = 0;
dev->ext_priv = budget_av;
saa7146_write(dev, DD1_INIT, 0x07000600);
saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
- saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
- msleep(500);
-
- if ( 0 == saa7113_init(budget_av) ) {
+ if (saa7113_init(budget_av) == 0) {
budget_av->has_saa7113 = 1;
- if ( 0 != saa7146_vv_init(dev,&vv_data)) {
- /* fixme: proper cleanup here */
- ERR(("cannot init vv subsystem.\n"));
- return err;
- }
+ if (0 != saa7146_vv_init(dev, &vv_data)) {
+ /* fixme: proper cleanup here */
+ ERR(("cannot init vv subsystem.\n"));
+ return err;
+ }
if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_GRABBER))) {
- /* fixme: proper cleanup here */
- ERR(("cannot register capture v4l2 device.\n"));
- return err;
- }
-
- /* beware: this modifies dev->vv ... */
- saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
- SAA7146_HPS_SYNC_PORT_A);
+ /* fixme: proper cleanup here */
+ ERR(("cannot register capture v4l2 device.\n"));
+ return err;
+ }
- saa7113_setinput (budget_av, 0);
- } else {
- budget_av->has_saa7113 = 0;
+ /* beware: this modifies dev->vv ... */
+ saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
+ SAA7146_HPS_SYNC_PORT_A);
- saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+ saa7113_setinput(budget_av, 0);
}
/* fixme: find some sane values here... */
saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
- mac = budget_av->budget.dvb_adapter->proposed_mac;
+ mac = budget_av->budget.dvb_adapter.proposed_mac;
if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
- printk("KNC1-%d: Could not read MAC from KNC1 card\n",
- budget_av->budget.dvb_adapter->num);
+ printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n",
+ budget_av->budget.dvb_adapter.num);
memset(mac, 0, 6);
} else {
- printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
- budget_av->budget.dvb_adapter->num,
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-}
+ printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ budget_av->budget.dvb_adapter.num,
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ }
- budget_av->budget.dvb_adapter->priv = budget_av;
+ budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
+ ciintf_init(budget_av);
- if (enable_ci)
- ciintf_init(budget_av);
+ ttpci_budget_init_hooks(&budget_av->budget);
return 0;
}
#define KNC1_INPUTS 2
static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
- { 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
- { 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+ {0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
+ {1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
};
-
static struct saa7146_extension_ioctls ioctls[] = {
- { VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE },
- { VIDIOC_G_INPUT, SAA7146_EXCLUSIVE },
- { VIDIOC_S_INPUT, SAA7146_EXCLUSIVE },
- { 0, 0 }
+ {VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE},
+ {VIDIOC_G_INPUT, SAA7146_EXCLUSIVE},
+ {VIDIOC_S_INPUT, SAA7146_EXCLUSIVE},
+ {0, 0}
};
-
-static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
+static int av_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
{
struct saa7146_dev *dev = fh->dev;
- struct budget_av *budget_av = (struct budget_av*) dev->ext_priv;
+ struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
- switch(cmd) {
+ switch (cmd) {
case VIDIOC_ENUMINPUT:{
struct v4l2_input *i = arg;
-
+
dprintk(1, "VIDIOC_ENUMINPUT %d.\n", i->index);
- if( i->index < 0 || i->index >= KNC1_INPUTS) {
+ if (i->index < 0 || i->index >= KNC1_INPUTS) {
return -EINVAL;
}
memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
return 0;
}
case VIDIOC_G_INPUT:{
- int *input = (int *)arg;
+ int *input = (int *) arg;
*input = budget_av->cur_input;
dprintk(1, "VIDIOC_G_INPUT %d.\n", *input);
- return 0;
- }
+ return 0;
+ }
case VIDIOC_S_INPUT:{
- int input = *(int *)arg;
+ int input = *(int *) arg;
dprintk(1, "VIDIOC_S_INPUT %d.\n", input);
- return saa7113_setinput (budget_av, input);
+ return saa7113_setinput(budget_av, input);
}
default:
return -ENOIOCTLCMD;
static struct saa7146_standard standard[] = {
{.name = "PAL",.id = V4L2_STD_PAL,
- .v_offset = 0x17, .v_field = 288,
- .h_offset = 0x14, .h_pixels = 680,
+ .v_offset = 0x17,.v_field = 288,
+ .h_offset = 0x14,.h_pixels = 680,
.v_max_out = 576,.h_max_out = 768 },
{.name = "NTSC",.id = V4L2_STD_NTSC,
- .v_offset = 0x16, .v_field = 240,
- .h_offset = 0x06, .h_pixels = 708,
+ .v_offset = 0x16,.v_field = 240,
+ .h_offset = 0x06,.h_pixels = 708,
.v_max_out = 480,.h_max_out = 640, },
};
static struct saa7146_ext_vv vv_data = {
- .inputs = 2,
- .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
- .flags = 0,
- .stds = &standard[0],
- .num_stds = sizeof(standard)/sizeof(struct saa7146_standard),
- .ioctls = &ioctls[0],
- .ioctl = av_ioctl,
+ .inputs = 2,
+ .capabilities = 0, // perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
+ .flags = 0,
+ .stds = &standard[0],
+ .num_stds = sizeof(standard) / sizeof(struct saa7146_standard),
+ .ioctls = &ioctls[0],
+ .ioctl = av_ioctl,
};
static struct saa7146_extension budget_extension;
MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
-static struct pci_device_id pci_tbl [] = {
+static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
+ MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
+ MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+ MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
+ MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
+ MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
+ MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
+ MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
+ MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
+ MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
{
- .vendor = 0,
+ .vendor = 0,
}
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
static struct saa7146_extension budget_extension = {
- .name = "budget dvb /w video in\0",
- .pci_tbl = pci_tbl,
+ .name = "budget_av",
+ .flags = SAA7146_USE_I2C_IRQ,
- .module = THIS_MODULE,
- .attach = budget_av_attach,
- .detach = budget_av_detach,
+ .pci_tbl = pci_tbl,
- .irq_mask = MASK_10,
+ .module = THIS_MODULE,
+ .attach = budget_av_attach,
+ .detach = budget_av_detach,
+
+ .irq_mask = MASK_10,
.irq_func = budget_av_irq,
-};
+};
-static int __init budget_av_init(void)
+static int __init budget_av_init(void)
{
return saa7146_register_extension(&budget_extension);
}
static void __exit budget_av_exit(void)
{
- saa7146_unregister_extension(&budget_extension);
+ saa7146_unregister_extension(&budget_extension);
}
module_init(budget_av_init);
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
"budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
-module_param_named(enable_ci, enable_ci, int, 0644);
-MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off).");
git://git.onelab.eu / linux-2.6.git / blobdiff