/*
- * budget.c: driver for the SAA7146 based Budget DVB cards
+ * budget.c: driver for the SAA7146 based Budget DVB cards
*
- * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
*
* Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
*
- * Copyright (C) 1999-2002 Ralph Metzler
+ * Copyright (C) 1999-2002 Ralph Metzler
* & Marcus Metzler for convergence integrated media GmbH
*
* 26feb2004 Support for FS Activy Card (Grundig tuner) by
* Michael Dreher <michael@5dot1.de>,
* Oliver Endriss <o.endriss@gmx.de> and
* Andreas 'randy' Weinberger
- *
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
- *
+ *
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
+ *
*
* the project's page is at http://www.linuxtv.org/dvb/
*/
#include "ves1820.h"
#include "l64781.h"
#include "tda8083.h"
+#include "s5h1420.h"
+#include "lnbp21.h"
+#include "bsru6.h"
static void Set22K (struct budget *budget, int state)
{
saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
}
-
/* Diseqc functions only for TT Budget card */
/* taken from the Skyvision DVB driver by
Ralph Metzler <rjkm@metzlerbros.de> */
udelay(data ? 1000 : 500);
}
-
static void DiseqcSendByte (struct budget *budget, int data)
{
int i, par=1, d;
DiseqcSendBit(budget, par);
}
-
static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
{
struct saa7146_dev *dev=budget->dev;
* Routines for the Fujitsu Siemens Activy budget card
* 22 kHz tone and DiSEqC are handled by the frontend.
* Voltage must be set here.
+ * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
*/
static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
{
struct saa7146_dev *dev=budget->dev;
- dprintk(2, "budget: %p\n", budget);
+ dprintk(2, "budget: %p\n", budget);
switch (voltage) {
case SEC_VOLTAGE_13:
+ saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
break;
case SEC_VOLTAGE_18:
+ saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
break;
+ case SEC_VOLTAGE_OFF:
+ saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
+ break;
default:
return -EINVAL;
}
struct budget* budget = (struct budget*) fe->dvb->priv;
switch (tone) {
- case SEC_TONE_ON:
- Set22K (budget, 1);
- break;
- case SEC_TONE_OFF:
- Set22K (budget, 0);
- break;
-
- default:
- return -EINVAL;
+ case SEC_TONE_ON:
+ Set22K (budget, 1);
+ break;
+
+ case SEC_TONE_OFF:
+ Set22K (budget, 0);
+ break;
+
+ default:
+ return -EINVAL;
}
return 0;
}
static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
- {
+{
struct budget* budget = (struct budget*) fe->dvb->priv;
- SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
+ SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
return 0;
- }
+}
static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
{
SendDiSEqCMsg (budget, 0, NULL, minicmd);
- return 0;
+ return 0;
}
static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
buf[2] = ((div & 0x18000) >> 10) | 0x95;
buf[3] = (pwr << 6) | 0x30;
- // NOTE: since we're using a prescaler of 2, we set the
+ // NOTE: since we're using a prescaler of 2, we set the
// divisor frequency to 62.5kHz and divide by 125 above
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
.pll_set = alps_bsrv2_pll_set,
};
-static u8 alps_bsru6_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x00,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x52,
- 0xff, 0xff
-};
-
-static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
- u8 aclk = 0;
- u8 bclk = 0;
-
- if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
- else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
- else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
- else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
- else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
- else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
- stv0299_writereg (fe, 0x13, aclk);
- stv0299_writereg (fe, 0x14, bclk);
- stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
- stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
- stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
-
- return 0;
- }
-
-static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
- struct budget* budget = (struct budget*) fe->dvb->priv;
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = 0xC4;
-
- if (params->frequency > 1530000) data[3] = 0xc0;
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
- return 0;
-}
-
-static struct stv0299_config alps_bsru6_config = {
-
- .demod_address = 0x68,
- .inittab = alps_bsru6_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .enhanced_tuning = 0,
- .skip_reinit = 0,
- .lock_output = STV0229_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsru6_pll_set,
-};
-
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
return 0;
- }
+}
static struct l64781_config grundig_29504_401_config = {
.demod_address = 0x55,
.pll_set = grundig_29504_451_pll_set,
};
+static int s5h1420_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u32* freqout)
+{
+ struct budget* budget = (struct budget*) fe->dvb->priv;
+ u32 div;
+ u8 data[4];
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = params->frequency / 1000;
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0xc2;
+
+ if (div < 1450)
+ data[3] = 0x00;
+ else if (div < 1850)
+ data[3] = 0x40;
+ else if (div < 2000)
+ data[3] = 0x80;
+ else
+ data[3] = 0xc0;
+
+ if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+
+ *freqout = div * 1000;
+ return 0;
+}
+
+static struct s5h1420_config s5h1420_config = {
+ .demod_address = 0x53,
+ .invert = 1,
+ .pll_set = s5h1420_pll_set,
+};
+
static u8 read_pwm(struct budget* budget)
{
u8 b = 0xff;
struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
{ .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
- if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+ if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
pwm = 0x48;
return pwm;
{
switch(budget->dev->pci->subsystem_device) {
case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
-
+ case 0x1013:
// try the ALPS BSRV2 first of all
budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
- budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
budget->dvb_frontend->ops->set_tone = budget_set_tone;
break;
}
// try the ALPS BSRU6 now
budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
- if (budget->dvb_frontend) {
- budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
- budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
- budget->dvb_frontend->ops->set_tone = budget_set_tone;
- break;
- }
break;
- case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
+ case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
budget->dvb_frontend = ves1820_attach(&alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
if (budget->dvb_frontend) break;
break;
- case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
+ case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
budget->dvb_frontend = l64781_attach(&grundig_29504_401_config, &budget->i2c_adap);
if (budget->dvb_frontend) break;
break;
- case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI (tda8083/Grundig 29504-451(tsa5522))
+ case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059))
+ budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
+ budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
+ }
+ break;
- // grundig 29504-451
- budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
+ case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
+ budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
- break;
+ budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
}
break;
+
+ case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
+ budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) {
+ printk("%s: No LNBP21 found!\n", __FUNCTION__);
+ goto error_out;
+ }
+ break;
+ }
}
if (budget->dvb_frontend == NULL) {
budget->dev->pci->subsystem_vendor,
budget->dev->pci->subsystem_device);
} else {
- if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
- printk("budget: Frontend registration failed!\n");
- if (budget->dvb_frontend->ops->release)
- budget->dvb_frontend->ops->release(budget->dvb_frontend);
- budget->dvb_frontend = NULL;
- }
+ if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
+ goto error_out;
}
+ return;
+
+error_out:
+ printk("budget: Frontend registration failed!\n");
+ if (budget->dvb_frontend->ops->release)
+ budget->dvb_frontend->ops->release(budget->dvb_frontend);
+ budget->dvb_frontend = NULL;
+ return;
}
static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
return err;
}
- budget->dvb_adapter->priv = budget;
+ budget->dvb_adapter.priv = budget;
frontend_init(budget);
return 0;
}
-
static int budget_detach (struct saa7146_dev* dev)
{
struct budget *budget = (struct budget*) dev->ext_priv;
return err;
}
-
-
static struct saa7146_extension budget_extension;
MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
-/* MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); UNDEFINED HARDWARE - mail linuxtv.org list */
-MAKE_BUDGET_INFO(fsacs, "Fujitsu Siemens Activy Budget-S PCI", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC);
+MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
-/* MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), UNDEFINED HARDWARE */
- MAKE_EXTENSION_PCI(fsacs, 0x1131, 0x4f61),
+ MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
+ MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
+ MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
+ MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
{
.vendor = 0,
}
MODULE_DEVICE_TABLE(pci, pci_tbl);
static struct saa7146_extension budget_extension = {
- .name = "budget dvb\0",
- .flags = 0,
-
+ .name = "budget dvb",
+ .flags = SAA7146_I2C_SHORT_DELAY,
+
.module = THIS_MODULE,
.pci_tbl = pci_tbl,
.attach = budget_attach,
.irq_mask = MASK_10,
.irq_func = ttpci_budget_irq10_handler,
-};
-
+};
-static int __init budget_init(void)
+static int __init budget_init(void)
{
return saa7146_register_extension(&budget_extension);
}
-
static void __exit budget_exit(void)
{
- saa7146_unregister_extension(&budget_extension);
+ saa7146_unregister_extension(&budget_extension);
}
module_init(budget_init);
MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
"budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
-