comment "Video Adapters"
+config VIDEO_ADV_DEBUG
+ bool "Enable advanced debug functionality"
+ depends on VIDEO_DEV
+ default n
+ ---help---
+ Say Y here to enable advanced debugging functionality on some
+ V4L devices.
+ In doubt, say N.
+
config VIDEO_BT848
tristate "BT848 Video For Linux"
depends on VIDEO_DEV && PCI && I2C
the Miro, Hauppauge and STB boards. Please read the material in
<file:Documentation/video4linux/bttv/> for more information.
- If you say Y or M here, you need to say Y or M to "I2C support" and
- "I2C bit-banging interfaces" in the device drivers section.
-
To compile this driver as a module, choose M here: the
module will be called bttv.
+config VIDEO_BT848_DVB
+ bool "DVB/ATSC Support for bt878 based TV cards"
+ depends on VIDEO_BT848 && DVB_CORE
+ select DVB_BT8XX
+ ---help---
+ This adds support for DVB/ATSC cards based on the BT878 chip.
+
+config VIDEO_SAA6588
+ tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
+ depends on VIDEO_DEV && I2C && VIDEO_BT848
+
+ help
+ Support for Radio Data System (RDS) decoder. This allows seeing
+ radio station identification transmitted using this standard.
+ Currentlly, it works only with bt8x8 chips.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa6588.
+
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
depends on VIDEO_DEV && ISA
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
- <http://www.stradis.com/decoder.html>.
+ <http://www.stradis.com/>.
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
To compile this driver as a module, choose M here: the
module will be called zr36067.
-
+
config VIDEO_ZORAN_BUZ
tristate "Iomega Buz support"
depends on VIDEO_ZORAN
config VIDEO_ZORAN_DC30
tristate "Pinnacle/Miro DC30(+) support"
- depends on VIDEO_ZORAN
- help
+ depends on VIDEO_ZORAN
+ help
Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
card. This also supports really old DC10 cards based on the
zr36050 MJPEG codec and zr36016 VFE.
To compile this driver as a module, choose M here: the
module will be called meye.
-config VIDEO_SAA7134
- tristate "Philips SAA7134 support"
- depends on VIDEO_DEV && PCI && I2C
- select VIDEO_BUF
- select VIDEO_IR
- select VIDEO_TUNER
- select CRC32
- ---help---
- This is a video4linux driver for Philips SAA7130/7134 based
- TV cards.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7134.
-
-config VIDEO_SAA7134_DVB
- tristate "DVB Support for saa7134 based TV cards"
- depends on VIDEO_SAA7134 && DVB_CORE
- select VIDEO_BUF_DVB
- select DVB_MT352
- select DVB_CX22702
- ---help---
- This adds support for DVB cards based on the
- Philips saa7134 chip.
+source "drivers/media/video/saa7134/Kconfig"
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
---help---
This is a video4linux driver for the 'Multimedia eXtension Board'
TV card by Siemens-Nixdorf.
-
+
To compile this driver as a module, choose M here: the
module will be called mxb.
for SAA7146 bases boards, so if you have some unsupported
saa7146 based, analog video card, chances are good that it
will work with this skeleton driver.
-
+
To compile this driver as a module, choose M here: the
module will be called dpc7146.
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
-
+
To compile this driver as a module, choose M here: the
module will be called hexium_orion.
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
card is *not* fully supported.
-
+
To compile this driver as a module, choose M here: the
module will be called hexium_gemini.
-config VIDEO_CX88
- tristate "Conexant 2388x (bt878 successor) support"
- depends on VIDEO_DEV && PCI && I2C && EXPERIMENTAL
- select I2C_ALGOBIT
- select FW_LOADER
- select VIDEO_BTCX
- select VIDEO_BUF
- select VIDEO_TUNER
- select VIDEO_TVEEPROM
- select VIDEO_IR
- ---help---
- This is a video4linux driver for Conexant 2388x based
- TV cards.
+source "drivers/media/video/cx88/Kconfig"
- To compile this driver as a module, choose M here: the
- module will be called cx8800
-
-config VIDEO_CX88_DVB
- tristate "DVB Support for cx2388x based TV cards"
- depends on VIDEO_CX88 && DVB_CORE
- select VIDEO_BUF_DVB
- select DVB_MT352
- select DVB_OR51132
- ---help---
- This adds support for DVB/ATSC cards based on the
- Connexant 2388x chip.
+source "drivers/media/video/em28xx/Kconfig"
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support"
config VIDEO_M32R_AR_M64278
tristate "Use Colour AR module M64278(VGA)"
- depends on VIDEO_M32R_AR
+ depends on VIDEO_M32R_AR && PLAT_M32700UT
---help---
Say Y here to use the Renesas M64278E-800 camera module,
which supports VGA(640x480 pixcels) size of images.
+config VIDEO_AUDIO_DECODER
+ tristate "Add support for additional audio chipsets"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Say Y here to compile drivers for WM8775 and CS53L32A audio
+ decoders.
+
+config VIDEO_DECODER
+ tristate "Add support for additional video chipsets"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ select FW_LOADER
+ ---help---
+ Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
+ video decoders.
+
endmenu