*/
-#include <linux/config.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
- { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
+ { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
{ 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
+ { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
{ 0, -1, NULL }
};
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY2x0] = {
- .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
+ .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
.video_inputs = 2,
.audio_inputs = 1,
.tuner = -1,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
- .muxsel = { 3, 0, 1, 2 },
+ .muxsel = { 3, 1 },
.pll = PLL_28,
.no_gpioirq = 1,
.has_dvb = 1,
/* Michael Krufky <mkrufky@m1k.net> */
.name = "DViCO FusionHDTV 5 Lite",
.tuner = 0,
- .tuner_type = TUNER_LG_TDVS_H062F,
+ .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.video_inputs = 3,
},
/* ---- card 0x88---------------------------------- */
[BTTV_BOARD_ACORP_Y878F] = {
- /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
+ /* Mauro Carvalho Chehab <mchehab@infradead.org> */
.name = "Acorp Y878F",
.video_inputs = 3,
.audio_inputs = 1,
/* Hybrid DVB card, DOES have a tda9887 */
if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
tda9887 = 1;
- if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
- (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
- (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
- tda9887)
- request_module("tda9887");
if (btv->tuner_type != UNSET)
request_module("tuner");
}
break;
case 0x0060:
case 0x0070:
+ case 0x00A0:
btv->c.type = BTTV_BOARD_OSPREY2x0;
/* enable output on select control lines */
gpio_inout(0xffffff,0x000303);
* - sleep 1ms
* - write 0x0E
* read from GPIO_DATA into buf (uint_32)
- * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
+ * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
*
* The IVC120G security card has 4 i2c controlled TDA8540 matrix
* swichers to provide 16 channels to MUX0. The TDA8540's have
- * 4 indepedant outputs and as such the IVC120G also has the
+ * 4 independent outputs and as such the IVC120G also has the
* optional "Monitor Out" bus. This allows the card to be looking
* at one input while the monitor is looking at another.
*
int pcipci_fail = 0;
struct pci_dev *dev = NULL;
- if (pci_pci_problems & PCIPCI_FAIL)
+ if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
pcipci_fail = 1;
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
triton1 = 1;