* For use with LSI Logic PCI chip/adapter(s)
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
-#ifdef __sparc__
-#include <asm/irq.h> /* needed for __irq_itoa() proto */
-#endif
#include "mptbase.h"
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT_LINUX_VERSION_COMMON);
+MODULE_VERSION(my_VERSION);
/*
* cmd line parameters
/*
* Forward protos...
*/
-static irqreturn_t mpt_interrupt(int irq, void *bus_id, struct pt_regs *r);
+static irqreturn_t mpt_interrupt(int irq, void *bus_id);
static int mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
u32 *req, int replyBytes, u16 *u16reply, int maxwait,
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
* @irq: irq number (not used)
* @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
- * @r: pt_regs pointer (not used)
*
* This routine is registered via the request_irq() kernel API call,
* and handles all interrupts generated from a specific MPT adapter
* the protocol-specific details of the MPT request completion.
*/
static irqreturn_t
-mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
+mpt_interrupt(int irq, void *bus_id)
{
MPT_ADAPTER *ioc = bus_id;
- u32 pa;
+ u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+
+ if (pa == 0xFFFFFFFF)
+ return IRQ_NONE;
/*
* Drain the reply FIFO!
*/
- while (1) {
- pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
- if (pa == 0xFFFFFFFF)
- return IRQ_HANDLED;
- else if (pa & MPI_ADDRESS_REPLY_A_BIT)
+ do {
+ if (pa & MPI_ADDRESS_REPLY_A_BIT)
mpt_reply(ioc, pa);
else
mpt_turbo_reply(ioc, pa);
- }
+ pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+ } while (pa != 0xFFFFFFFF);
return IRQ_HANDLED;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mpt_base_reply - MPT base driver's callback routine; all base driver
- * "internal" request/reply processing is routed here.
- * Currently used for EventNotification and EventAck handling.
+/**
+ * mpt_base_reply - MPT base driver's callback routine
* @ioc: Pointer to MPT_ADAPTER structure
* @mf: Pointer to original MPT request frame
* @reply: Pointer to MPT reply frame (NULL if TurboReply)
*
+ * MPT base driver's callback routine; all base driver
+ * "internal" request/reply processing is routed here.
+ * Currently used for EventNotification and EventAck handling.
+ *
* Returns 1 indicating original alloc'd request frame ptr
* should be freed, or 0 if it shouldn't.
*/
*/
if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
freereq = 0;
- devtverboseprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
- ioc->name, pEvReply));
} else {
devtverboseprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
ioc->name, pEvReply));
* @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
*
* This routine is called by a protocol-specific driver (SCSI host,
- * LAN, SCSI target) to register it's reply callback routine. Each
+ * LAN, SCSI target) to register its reply callback routine. Each
* protocol-specific driver must do this before it will be able to
* use any IOC resources, such as obtaining request frames.
*
* mpt_deregister - Deregister a protocol drivers resources.
* @cb_idx: previously registered callback handle
*
- * Each protocol-specific driver should call this routine when it's
+ * Each protocol-specific driver should call this routine when its
* module is unloaded.
*/
void
*
* Each protocol-specific driver should call this routine
* when it does not (or can no longer) handle events,
- * or when it's module is unloaded.
+ * or when its module is unloaded.
*/
void
mpt_event_deregister(int cb_idx)
*
* Each protocol-specific driver should call this routine
* when it does not (or can no longer) handle IOC reset handling,
- * or when it's module is unloaded.
+ * or when its module is unloaded.
*/
void
mpt_reset_deregister(int cb_idx)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_device_driver_register - Register device driver hooks
+ * @dd_cbfunc: driver callbacks struct
+ * @cb_idx: MPT protocol driver index
*/
int
mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx)
{
MPT_ADAPTER *ioc;
+ const struct pci_device_id *id;
- if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) {
+ if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
return -EINVAL;
- }
MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
/* call per pci device probe entry point */
list_for_each_entry(ioc, &ioc_list, list) {
- if(dd_cbfunc->probe) {
- dd_cbfunc->probe(ioc->pcidev,
- ioc->pcidev->driver->id_table);
- }
+ id = ioc->pcidev->driver ?
+ ioc->pcidev->driver->id_table : NULL;
+ if (dd_cbfunc->probe)
+ dd_cbfunc->probe(ioc->pcidev, id);
}
return 0;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_device_driver_deregister - DeRegister device driver hooks
+ * @cb_idx: MPT protocol driver index
*/
void
mpt_device_driver_deregister(int cb_idx)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_send_handshake_request - Send MPT request via doorbell
- * handshake method.
+ * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
* @handle: Handle of registered MPT protocol driver
* @ioc: Pointer to MPT adapter structure
* @reqBytes: Size of the request in bytes
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_host_page_access_control - provides mechanism for the host
- * driver to control the IOC's Host Page Buffer access.
+ * mpt_host_page_access_control - control the IOC's Host Page Buffer access
* @ioc: Pointer to MPT adapter structure
* @access_control_value: define bits below
+ * @sleepFlag: Specifies whether the process can sleep
+ *
+ * Provides mechanism for the host driver to control the IOC's
+ * Host Page Buffer access.
*
* Access Control Value - bits[15:12]
* 0h Reserved
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_host_page_alloc - allocate system memory for the fw
- * If we already allocated memory in past, then resend the same pointer.
- * ioc@: Pointer to pointer to IOC adapter
- * ioc_init@: Pointer to ioc init config page
+ * @ioc: Pointer to pointer to IOC adapter
+ * @ioc_init: Pointer to ioc init config page
*
+ * If we already allocated memory in past, then resend the same pointer.
* Returns 0 for success, non-zero for failure.
*/
static int
dinitprintk((MYIOC_s_INFO_FMT
"host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
- ioc->name,
- ioc->HostPageBuffer,
- ioc->HostPageBuffer_dma,
+ ioc->name, ioc->HostPageBuffer,
+ (u32)ioc->HostPageBuffer_dma,
host_page_buffer_sz));
ioc->alloc_total += host_page_buffer_sz;
ioc->HostPageBuffer_sz = host_page_buffer_sz;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_verify_adapter - Given a unique IOC identifier, set pointer to
- * the associated MPT adapter structure.
+ * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
* @iocid: IOC unique identifier (integer)
* @iocpp: Pointer to pointer to IOC adapter
*
- * Returns iocid and sets iocpp.
+ * Given a unique IOC identifier, set pointer to the associated MPT
+ * adapter structure.
+ *
+ * Returns iocid and sets iocpp if iocid is found.
+ * Returns -1 if iocid is not found.
*/
int
mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_attach - Install a PCI intelligent MPT adapter.
* @pdev: Pointer to pci_dev structure
+ * @id: PCI device ID information
*
* This routine performs all the steps necessary to bring the IOC of
* a MPT adapter to a OPERATIONAL state. This includes registering
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
- spin_lock_init(&ioc->fc_rescan_work_lock);
spin_lock_init(&ioc->initializing_hba_lock);
/* Initialize the event logging.
port = psize = 0;
for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
+ if (psize)
+ continue;
/* Get I/O space! */
port = pci_resource_start(pdev, ii);
psize = pci_resource_len(pdev,ii);
} else {
+ if (msize)
+ continue;
/* Get memmap */
mem_phys = pci_resource_start(pdev, ii);
msize = pci_resource_len(pdev,ii);
- break;
}
}
ioc->mem_size = msize;
- if (ii == DEVICE_COUNT_RESOURCE) {
- printk(KERN_ERR MYNAM ": ERROR - MPT adapter has no memory regions defined!\n");
- kfree(ioc);
- return -EINVAL;
- }
-
- dinitprintk((KERN_INFO MYNAM ": MPT adapter @ %lx, msize=%dd bytes\n", mem_phys, msize));
- dinitprintk((KERN_INFO MYNAM ": (port i/o @ %lx, psize=%dd bytes)\n", port, psize));
-
mem = NULL;
/* Get logical ptr for PciMem0 space */
/*mem = ioremap(mem_phys, msize);*/
- mem = ioremap(mem_phys, 0x100);
+ mem = ioremap(mem_phys, msize);
if (mem == NULL) {
printk(KERN_ERR MYNAM ": ERROR - Unable to map adapter memory!\n");
kfree(ioc);
ioc->bus_type = SAS;
ioc->errata_flag_1064 = 1;
}
- else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066) {
- ioc->prod_name = "LSISAS1066";
- ioc->bus_type = SAS;
- ioc->errata_flag_1064 = 1;
- }
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068) {
ioc->prod_name = "LSISAS1068";
ioc->bus_type = SAS;
ioc->prod_name = "LSISAS1064E";
ioc->bus_type = SAS;
}
- else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066E) {
- ioc->prod_name = "LSISAS1066E";
- ioc->bus_type = SAS;
- }
else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068E) {
ioc->prod_name = "LSISAS1068E";
ioc->bus_type = SAS;
}
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+ ioc->prod_name = "LSISAS1078";
+ ioc->bus_type = SAS;
+ }
if (ioc->errata_flag_1064)
pci_disable_io_access(pdev);
/* Set lookup ptr. */
list_add_tail(&ioc->list, &ioc_list);
- ioc->pci_irq = -1;
- if (pdev->irq) {
- if (mpt_msi_enable && !pci_enable_msi(pdev))
- printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", ioc->name);
-
- r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
-
- if (r < 0) {
-#ifndef __sparc__
- printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n",
- ioc->name, pdev->irq);
-#else
- printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %s!\n",
- ioc->name, __irq_itoa(pdev->irq));
-#endif
- list_del(&ioc->list);
- iounmap(mem);
- kfree(ioc);
- return -EBUSY;
- }
-
- ioc->pci_irq = pdev->irq;
-
- pci_set_master(pdev); /* ?? */
- pci_set_drvdata(pdev, ioc);
-
-#ifndef __sparc__
- dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq));
-#else
- dprintk((KERN_INFO MYNAM ": %s installed at interrupt %s\n", ioc->name, __irq_itoa(pdev->irq)));
-#endif
- }
-
/* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
*/
mpt_detect_bound_ports(ioc, pdev);
ioc->name, r);
list_del(&ioc->list);
- free_irq(ioc->pci_irq, ioc);
- if (mpt_msi_enable)
- pci_disable_msi(pdev);
if (ioc->alt_ioc)
ioc->alt_ioc->alt_ioc = NULL;
iounmap(mem);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_detach - Remove a PCI intelligent MPT adapter.
* @pdev: Pointer to pci_dev structure
- *
*/
void
*/
#ifdef CONFIG_PM
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_suspend - Fusion MPT base driver suspend routine.
- *
- *
+ * @pdev: Pointer to pci_dev structure
+ * @state: new state to enter
*/
int
mpt_suspend(struct pci_dev *pdev, pm_message_t state)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_resume - Fusion MPT base driver resume routine.
- *
- *
+ * @pdev: Pointer to pci_dev structure
*/
int
mpt_resume(struct pci_dev *pdev)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_do_ioc_recovery - Initialize or recover MPT adapter.
* @ioc: Pointer to MPT adapter structure
* @reason: Event word / reason
int handlers;
int ret = 0;
int reset_alt_ioc_active = 0;
+ int irq_allocated = 0;
printk(KERN_INFO MYNAM ": Initiating %s %s\n",
ioc->name, reason==MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
}
}
+ /*
+ * Device is reset now. It must have de-asserted the interrupt line
+ * (if it was asserted) and it should be safe to register for the
+ * interrupt now.
+ */
+ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
+ ioc->pci_irq = -1;
+ if (ioc->pcidev->irq) {
+ if (mpt_msi_enable && !pci_enable_msi(ioc->pcidev))
+ printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
+ ioc->name);
+ rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
+ IRQF_SHARED, ioc->name, ioc);
+ if (rc < 0) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate "
+ "interrupt %d!\n", ioc->name,
+ ioc->pcidev->irq);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ return -EBUSY;
+ }
+ irq_allocated = 1;
+ ioc->pci_irq = ioc->pcidev->irq;
+ pci_set_master(ioc->pcidev); /* ?? */
+ pci_set_drvdata(ioc->pcidev, ioc);
+ dprintk((KERN_INFO MYNAM ": %s installed at interrupt "
+ "%d\n", ioc->name, ioc->pcidev->irq));
+ }
+ }
+
/* Prime reply & request queues!
* (mucho alloc's) Must be done prior to
* init as upper addresses are needed for init.
* chips (mpt_adapter_disable,
* mpt_diag_reset)
*/
- ioc->cached_fw = NULL;
ddlprintk((MYIOC_s_INFO_FMT ": mpt_upload: alt_%s has cached_fw=%p \n",
ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
+ ioc->alt_ioc->cached_fw = NULL;
}
} else {
printk(KERN_WARNING MYNAM ": firmware upload failure!\n");
ret = mptbase_sas_persist_operation(ioc,
MPI_SAS_OP_CLEAR_NOT_PRESENT);
if(ret != 0)
- return -1;
+ goto out;
}
/* Find IM volumes
mpt_findImVolumes(ioc);
} else if (ioc->bus_type == FC) {
- /*
- * Pre-fetch FC port WWN and stuff...
- * (FCPortPage0_t stuff)
- */
- for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) mptbase_GetFcPortPage0(ioc, ii);
- }
-
if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
(ioc->lan_cnfg_page0.Header.PageLength == 0)) {
/*
/* FIXME? Examine results here? */
}
+ out:
+ if ((ret != 0) && irq_allocated) {
+ free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ }
return ret;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mpt_detect_bound_ports - Search for PCI bus/dev_function
- * which matches PCI bus/dev_function (+/-1) for newly discovered 929,
- * 929X, 1030 or 1035.
+/**
+ * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
* @ioc: Pointer to MPT adapter structure
* @pdev: Pointer to (struct pci_dev) structure
*
+ * Search for PCI bus/dev_function which matches
+ * PCI bus/dev_function (+/-1) for newly discovered 929,
+ * 929X, 1030 or 1035.
+ *
* If match on PCI dev_function +/-1 is found, bind the two MPT adapters
* using alt_ioc pointer fields in their %MPT_ADAPTER structures.
*/
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_adapter_disable - Disable misbehaving MPT adapter.
- * @this: Pointer to MPT adapter structure
+ * @ioc: Pointer to MPT adapter structure
*/
static void
mpt_adapter_disable(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mpt_adapter_dispose - Free all resources associated with a MPT
- * adapter.
+/**
+ * mpt_adapter_dispose - Free all resources associated with an MPT adapter
* @ioc: Pointer to MPT adapter structure
*
* This routine unregisters h/w resources and frees all alloc'd memory
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * MptDisplayIocCapabilities - Disply IOC's capacilities.
+/**
+ * MptDisplayIocCapabilities - Disply IOC's capabilities.
* @ioc: Pointer to MPT adapter structure
*/
static void
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* MakeIocReady - Get IOC to a READY state, using KickStart if needed.
* @ioc: Pointer to MPT_ADAPTER structure
* @force: Force hard KickStart of IOC
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1); /* 1 msec delay */
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_GetIocState - Get the current state of a MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @cooked: Request raw or cooked IOC state
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* GetIocFacts - Send IOCFacts request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Specifies whether the process can sleep
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* GetPortFacts - Send PortFacts request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @portnum: Port number
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* SendIocInit - Send IOCInit request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Specifies whether the process can sleep
}
/* No need to byte swap the multibyte fields in the reply
- * since we don't even look at it's contents.
+ * since we don't even look at its contents.
*/
dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
state = mpt_GetIocState(ioc, 1);
while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay(1);
}
dinitprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
ioc->name, count));
+ ioc->aen_event_read_flag=0;
return r;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* SendPortEnable - Send PortEnable request to MPT adapter port.
* @ioc: Pointer to MPT_ADAPTER structure
* @portnum: Port number to enable
return rc;
}
-/*
- * ioc: Pointer to MPT_ADAPTER structure
- * size - total FW bytes
+/**
+ * mpt_alloc_fw_memory - allocate firmware memory
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @size: total FW bytes
+ *
+ * If memory has already been allocated, the same (cached) value
+ * is returned.
*/
void
mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
+ ioc->alloc_total += size;
+ ioc->alt_ioc->alloc_total -= size;
} else {
if ( (ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma) ) )
ioc->alloc_total += size;
}
}
-/*
- * If alt_img is NULL, delete from ioc structure.
- * Else, delete a secondary image in same format.
+/**
+ * mpt_free_fw_memory - free firmware memory
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * If alt_img is NULL, delete from ioc structure.
+ * Else, delete a secondary image in same format.
*/
void
mpt_free_fw_memory(MPT_ADAPTER *ioc)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Specifies whether the process can sleep
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_downloadboot - DownloadBoot code
* @ioc: Pointer to MPT_ADAPTER structure
- * @flag: Specify which part of IOC memory is to be uploaded.
+ * @pFwHeader: Pointer to firmware header info
* @sleepFlag: Specifies whether the process can sleep
*
* FwDownloadBoot requires Programmed IO access.
/* wait 1 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1);
}
}
/* wait .1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
/* wait 1 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1);
+ msleep (1);
} else {
mdelay (1);
}
return 0;
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (10);
+ msleep (10);
} else {
mdelay (10);
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* KickStart - Perform hard reset of MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @force: Force hard reset
SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
return hard_reset_done;
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (10);
+ msleep (10);
} else {
mdelay (10);
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_diag_reset - Perform hard reset of the adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @ignore: Set if to honor and clear to ignore
* the reset history bit
- * @sleepflag: CAN_SLEEP if called in a non-interrupt thread,
+ * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
* else set to NO_SLEEP (use mdelay instead)
*
* This routine places the adapter in diagnostic mode via the
static int
mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
{
+ MPT_ADAPTER *iocp=NULL;
u32 diag0val;
u32 doorbell;
int hard_reset_done = 0;
u32 diag1val = 0;
#endif
+ if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+ drsprintk((MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
+ "address=%p\n", ioc->name, __FUNCTION__,
+ &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
+ CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
+ if (sleepFlag == CAN_SLEEP)
+ msleep(1);
+ else
+ mdelay(1);
+
+ for (count = 0; count < 60; count ++) {
+ doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
+ doorbell &= MPI_IOC_STATE_MASK;
+
+ drsprintk((MYIOC_s_INFO_FMT
+ "looking for READY STATE: doorbell=%x"
+ " count=%d\n",
+ ioc->name, doorbell, count));
+ if (doorbell == MPI_IOC_STATE_READY) {
+ return 0;
+ }
+
+ /* wait 1 sec */
+ if (sleepFlag == CAN_SLEEP)
+ msleep(1000);
+ else
+ mdelay(1000);
+ }
+ return -1;
+ }
+
/* Clear any existing interrupts */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
/* wait 100 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
/* FIXME? Examine results here? */
}
- if (ioc->cached_fw) {
+ if (ioc->cached_fw)
+ iocp = ioc;
+ else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
+ iocp = ioc->alt_ioc;
+ if (iocp) {
/* If the DownloadBoot operation fails, the
* IOC will be left unusable. This is a fatal error
* case. _diag_reset will return < 0
*/
for (count = 0; count < 30; count ++) {
- diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ diag0val = CHIPREG_READ32(&iocp->chip->Diagnostic);
if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
break;
}
+ dprintk((MYIOC_s_INFO_FMT "cached_fw: diag0val=%x count=%d\n",
+ iocp->name, diag0val, count));
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
}
if ((count = mpt_downloadboot(ioc,
- (MpiFwHeader_t *)ioc->cached_fw, sleepFlag)) < 0) {
+ (MpiFwHeader_t *)iocp->cached_fw, sleepFlag)) < 0) {
printk(KERN_WARNING MYNAM
": firmware downloadboot failure (%d)!\n", count);
}
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
/* wait 100 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* SendIocReset - Send IOCReset request to MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @reset_type: reset type, expected values are
* %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
+ * @sleepFlag: Specifies whether the process can sleep
*
* Send IOCReset request to the MPT adapter.
*
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1); /* 1 msec delay */
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * initChainBuffers - Allocate memory for and initialize
- * chain buffers, chain buffer control arrays and spinlock.
- * @hd: Pointer to MPT_SCSI_HOST structure
- * @init: If set, initialize the spin lock.
+/**
+ * initChainBuffers - Allocate memory for and initialize chain buffers
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Allocates memory for and initializes chain buffers,
+ * chain buffer control arrays and spinlock.
*/
static int
initChainBuffers(MPT_ADAPTER *ioc)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* PrimeIocFifos - Initialize IOC request and reply FIFOs.
* @ioc: Pointer to MPT_ADAPTER structure
*
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * WaitForDoorbellAck - Wait for IOC to clear the IOP_DOORBELL_STATUS bit
- * in it's IntStatus register.
+/**
+ * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
* @ioc: Pointer to MPT_ADAPTER structure
* @howlong: How long to wait (in seconds)
* @sleepFlag: Specifies whether the process can sleep
*
* This routine waits (up to ~2 seconds max) for IOC doorbell
- * handshake ACKnowledge.
+ * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
+ * bit in its IntStatus register being clear.
*
* Returns a negative value on failure, else wait loop count.
*/
if (sleepFlag == CAN_SLEEP) {
while (--cntdn) {
+ msleep (1);
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
break;
- msleep_interruptible (1);
count++;
}
} else {
while (--cntdn) {
+ mdelay (1);
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
break;
- mdelay (1);
count++;
}
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * WaitForDoorbellInt - Wait for IOC to set the HIS_DOORBELL_INTERRUPT bit
- * in it's IntStatus register.
+/**
+ * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
* @ioc: Pointer to MPT_ADAPTER structure
* @howlong: How long to wait (in seconds)
* @sleepFlag: Specifies whether the process can sleep
*
- * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt.
+ * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
+ * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
*
* Returns a negative value on failure, else wait loop count.
*/
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
break;
- msleep_interruptible(1);
+ msleep(1);
count++;
}
} else {
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * WaitForDoorbellReply - Wait for and capture a IOC handshake reply.
+/**
+ * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
* @ioc: Pointer to MPT_ADAPTER structure
* @howlong: How long to wait (in seconds)
* @sleepFlag: Specifies whether the process can sleep
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* GetLanConfigPages - Fetch LANConfig pages.
* @ioc: Pointer to MPT_ADAPTER structure
*
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mptbase_GetFcPortPage0 - Fetch FCPort config Page0.
- * @ioc: Pointer to MPT_ADAPTER structure
- * @portnum: IOC Port number
- *
- * Return: 0 for success
- * -ENOMEM if no memory available
- * -EPERM if not allowed due to ISR context
- * -EAGAIN if no msg frames currently available
- * -EFAULT for non-successful reply or no reply (timeout)
- */
-int
-mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
-{
- ConfigPageHeader_t hdr;
- CONFIGPARMS cfg;
- FCPortPage0_t *ppage0_alloc;
- FCPortPage0_t *pp0dest;
- dma_addr_t page0_dma;
- int data_sz;
- int copy_sz;
- int rc;
- int count = 400;
-
-
- /* Get FCPort Page 0 header */
- hdr.PageVersion = 0;
- hdr.PageLength = 0;
- hdr.PageNumber = 0;
- hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
- cfg.cfghdr.hdr = &hdr;
- cfg.physAddr = -1;
- cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
- cfg.dir = 0;
- cfg.pageAddr = portnum;
- cfg.timeout = 0;
-
- if ((rc = mpt_config(ioc, &cfg)) != 0)
- return rc;
-
- if (hdr.PageLength == 0)
- return 0;
-
- data_sz = hdr.PageLength * 4;
- rc = -ENOMEM;
- ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
- if (ppage0_alloc) {
-
- try_again:
- memset((u8 *)ppage0_alloc, 0, data_sz);
- cfg.physAddr = page0_dma;
- cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
-
- if ((rc = mpt_config(ioc, &cfg)) == 0) {
- /* save the data */
- pp0dest = &ioc->fc_port_page0[portnum];
- copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
- memcpy(pp0dest, ppage0_alloc, copy_sz);
-
- /*
- * Normalize endianness of structure data,
- * by byte-swapping all > 1 byte fields!
- */
- pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
- pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
- pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
- pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
- pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
- pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
- pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
- pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
- pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
- pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
- pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
- pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
- pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
- pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
- pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
- pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
-
- /*
- * if still doing discovery,
- * hang loose a while until finished
- */
- if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
- if (count-- > 0) {
- msleep_interruptible(100);
- goto try_again;
- }
- printk(MYIOC_s_INFO_FMT "Firmware discovery not"
- " complete.\n",
- ioc->name);
- }
- }
-
- pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
- }
-
- return rc;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table
+/**
+ * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
* @ioc: Pointer to MPT_ADAPTER structure
- * @sas_address: 64bit SAS Address for operation.
- * @target_id: specified target for operation
- * @bus: specified bus for operation
* @persist_opcode: see below
*
* MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
*
* NOTE: Don't use not this function during interrupt time.
*
- * Returns: 0 for success, non-zero error
+ * Returns 0 for success, non-zero error
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* GetIoUnitPage2 - Retrieve BIOS version and boot order information.
* @ioc: Pointer to MPT_ADAPTER structure
*
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
+/**
+ * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
* @ioc: Pointer to a Adapter Strucutre
* @portnum: IOC port number
*
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mpt_readScsiDevicePageHeaders - save version and length of SDP1
+/**
+ * mpt_readScsiDevicePageHeaders - save version and length of SDP1
* @ioc: Pointer to a Adapter Strucutre
* @portnum: IOC port number
*
pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
if (!pIoc4)
return;
+ ioc->alloc_total += iocpage4sz;
} else {
ioc4_dma = ioc->spi_data.IocPg4_dma;
iocpage4sz = ioc->spi_data.IocPg4Sz;
} else {
pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
ioc->spi_data.pIocPg4 = NULL;
+ ioc->alloc_total -= iocpage4sz;
}
}
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * SendEventNotification - Send EventNotification (on or off) request
- * to MPT adapter.
+/**
+ * SendEventNotification - Send EventNotification (on or off) request to adapter
* @ioc: Pointer to MPT_ADAPTER structure
* @EvSwitch: Event switch flags
*/
EventAck_t *pAck;
if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK "
- "request frame for Event=%x EventContext=%x EventData=%x!\n",
- ioc->name, evnp->Event, le32_to_cpu(evnp->EventContext),
- le32_to_cpu(evnp->Data[0]));
+ dfailprintk((MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
+ ioc->name,__FUNCTION__));
return -1;
}
- memset(pAck, 0, sizeof(*pAck));
- dprintk((MYIOC_s_INFO_FMT "Sending EventAck\n", ioc->name));
+ devtverboseprintk((MYIOC_s_INFO_FMT "Sending EventAck\n", ioc->name));
pAck->Function = MPI_FUNCTION_EVENT_ACK;
pAck->ChainOffset = 0;
+ pAck->Reserved[0] = pAck->Reserved[1] = 0;
pAck->MsgFlags = 0;
+ pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
pAck->Event = evnp->Event;
pAck->EventContext = evnp->EventContext;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_config - Generic function to issue config message
- * @ioc - Pointer to an adapter structure
- * @cfg - Pointer to a configuration structure. Struct contains
+ * @ioc: Pointer to an adapter structure
+ * @pCfg: Pointer to a configuration structure. Struct contains
* action, page address, direction, physical address
* and pointer to a configuration page header
* Page header is updated.
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mpt_timer_expired - Call back for timer process.
+/**
+ * mpt_timer_expired - Callback for timer process.
* Used only internal config functionality.
* @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
*/
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_ioc_reset - Base cleanup for hard reset
* @ioc: Pointer to the adapter structure
* @reset_phase: Indicates pre- or post-reset functionality
*
- * Remark: Free's resources with internally generated commands.
+ * Remark: Frees resources with internally generated commands.
*/
static int
mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
* procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
*
* Returns 0 for success, non-zero for failure.
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
*
* Returns 0 for success, non-zero for failure.
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * procmpt_summary_read - Handle read request from /proc/mpt/summary
- * or from /proc/mpt/iocN/summary.
+/**
+ * procmpt_summary_read - Handle read request of a summary file
* @buf: Pointer to area to write information
* @start: Pointer to start pointer
* @offset: Offset to start writing
- * @request:
+ * @request: Amount of read data requested
* @eof: Pointer to EOF integer
* @data: Pointer
*
+ * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
* Returns number of characters written to process performing the read.
*/
static int
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* procmpt_version_read - Handle read request from /proc/mpt/version.
* @buf: Pointer to area to write information
* @start: Pointer to start pointer
* @offset: Offset to start writing
- * @request:
+ * @request: Amount of read data requested
* @eof: Pointer to EOF integer
* @data: Pointer
*
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info.
* @buf: Pointer to area to write information
* @start: Pointer to start pointer
* @offset: Offset to start writing
- * @request:
+ * @request: Amount of read data requested
* @eof: Pointer to EOF integer
* @data: Pointer
*
a[5], a[4], a[3], a[2], a[1], a[0]);
}
-#ifndef __sparc__
y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
-#else
- y += sprintf(buffer+len+y, ", IRQ=%s", __irq_itoa(ioc->pci_irq));
-#endif
if (!ioc->active)
y += sprintf(buffer+len+y, " (disabled)");
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_HardResetHandler - Generic reset handler, issue SCSI Task
- * Management call based on input arg values. If TaskMgmt fails,
- * return associated SCSI request.
+ * mpt_HardResetHandler - Generic reset handler
* @ioc: Pointer to MPT_ADAPTER structure
* @sleepFlag: Indicates if sleep or schedule must be called.
*
+ * Issues SCSI Task Management call based on input arg values.
+ * If TaskMgmt fails, returns associated SCSI request.
+ *
* Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
* or a non-interrupt thread. In the former, must not call schedule().
*
- * Remark: A return of -1 is a FATAL error case, as it means a
+ * Note: A return of -1 is a FATAL error case, as it means a
* FW reload/initialization failed.
*
* Returns 0 for SUCCESS or -1 if FAILED.
/* The SCSI driver needs to adjust timeouts on all current
* commands prior to the diagnostic reset being issued.
- * Prevents timeouts occuring during a diagnostic reset...very bad.
+ * Prevents timeouts occurring during a diagnostic reset...very bad.
* For all other protocol drivers, this is a no-op.
*/
{
break;
case MPI_EVENT_EVENT_CHANGE:
if (evData0)
- ds = "Events(ON) Change";
+ ds = "Events ON";
else
- ds = "Events(OFF) Change";
+ ds = "Events OFF";
break;
case MPI_EVENT_INTEGRATED_RAID:
{
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: No Persistancy "
- "Added: id=%d", id);
+ "SAS Device Status Change: No Persistancy: id=%d", id);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Device Reset : id=%d", id);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Task Abort : id=%d", id);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Abort Task Set : id=%d", id);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Clear Task Set : id=%d", id);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Internal Query Task : id=%d", id);
break;
default:
snprintf(evStr, EVENT_DESCR_STR_SZ,
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * ProcessEventNotification - Route a received EventNotificationReply to
- * all currently regeistered event handlers.
+/**
+ * ProcessEventNotification - Route EventNotificationReply to all event handlers
* @ioc: Pointer to MPT_ADAPTER structure
* @pEventReply: Pointer to EventNotification reply frame
* @evHandlers: Pointer to integer, number of event handlers
*
+ * Routes a received EventNotificationReply to all currently registered
+ * event handlers.
* Returns sum of event handlers return values.
*/
static int
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_fc_log_info - Log information returned from Fibre Channel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @log_info: U32 LogInfo reply word from the IOC
*
- * Refer to lsi/fc_log.h.
+ * Refer to lsi/mpi_log_fc.h.
*/
static void
mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @mr: Pointer to MPT reply frame
"Invalid SAS Address", /* 01h */
NULL, /* 02h */
"Invalid Page", /* 03h */
- NULL, /* 04h */
- "Task Terminated" /* 05h */
+ "Diag Message Error", /* 04h */
+ "Task Terminated", /* 05h */
+ "Enclosure Management", /* 06h */
+ "Target Mode" /* 07h */
};
static char *pl_code_str[] = {
NULL, /* 00h */
"Abort", /* 12h */
"IO Not Yet Executed", /* 13h */
"IO Executed", /* 14h */
- "Persistant Reservation Out Not Affiliation Owner", /* 15h */
+ "Persistent Reservation Out Not Affiliation Owner", /* 15h */
"Open Transmit DMA Abort", /* 16h */
- NULL, /* 17h */
+ "IO Device Missing Delay Retry", /* 17h */
NULL, /* 18h */
NULL, /* 19h */
NULL, /* 1Ah */
};
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_sas_log_info - Log information returned from SAS IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @log_info: U32 LogInfo reply word from the IOC
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @ioc_status: U32 IOCStatus word from IOC
mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
{
u32 status = ioc_status & MPI_IOCSTATUS_MASK;
- char *desc = "";
+ char *desc = NULL;
switch (status) {
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
desc = "Others";
break;
}
- if (desc != "")
+ if (desc != NULL)
printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc);
}
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
-EXPORT_SYMBOL(mptbase_GetFcPortPage0);
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* fusion_init - Fusion MPT base driver initialization routine.
*
* Returns 0 for success, non-zero for failure.
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* fusion_exit - Perform driver unload cleanup.
*
* This routine frees all resources associated with each MPT adapter
git://git.onelab.eu / linux-2.6.git / blobdiff