* For use with LSI Logic PCI chip/adapter(s)
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
+ * Copyright (c) 1999-2007 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
break;
}
}
+ } else if (ioc->bus_type == FC) {
+ /*
+ * The FC IOC may kill a request for variety of
+ * reasons, some of which may be recovered by a
+ * retry, some which are unlikely to be
+ * recovered. Return DID_ERROR instead of
+ * DID_RESET to permit retry of the command,
+ * just not an infinite number of them
+ */
+ sc->result = DID_ERROR << 16;
+ break;
}
/*
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_proc_info - Return information about MPT adapter
+ * @host: scsi host struct
+ * @buffer: if write, user data; if read, buffer for user
+ * @start: returns the buffer address
+ * @offset: if write, 0; if read, the current offset into the buffer from
+ * the previous read.
+ * @length: if write, return length;
+ * @func: write = 1; read = 0
*
* (linux scsi_host_template.info routine)
- *
- * buffer: if write, user data; if read, buffer for user
- * length: if write, return length;
- * offset: if write, 0; if read, the current offset into the buffer from
- * the previous read.
- * hostno: scsi host number
- * func: if write = 1; if read = 0
*/
int
mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mptscsih_host_reset - Perform a SCSI host adapter RESET!
- * new_eh variant
+ * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
*
* (linux scsi_host_template.eh_host_reset_handler routine)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mptscsih_tm_pending_wait - wait for pending task management request to
- * complete.
+ * mptscsih_tm_pending_wait - wait for pending task management request to complete
* @hd: Pointer to MPT host structure.
*
* Returns {SUCCESS,FAILED}.
/**
* mptscsih_tm_wait_for_completion - wait for completion of TM task
* @hd: Pointer to MPT host structure.
+ * @timeout: timeout in seconds
*
* Returns {SUCCESS,FAILED}.
*/
struct scsi_device *sdev)
{
dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
- hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd));
+ hd->ioc->name, vtarget->bus_id, vtarget->target_id,
+ sdev->lun, hd));
/* Is LUN supported? If so, upper 2 bits will be 0
* in first byte of inquiry data.
else {
factor = MPT_ULTRA320;
if (scsi_device_qas(sdev)) {
- ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
+ ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
noQas = 0;
}
if (sdev->type == TYPE_TAPE &&
/**
* mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
* @hd: Pointer to a SCSI HOST structure
- * @vtarget: per device private data
- * @lun: lun
+ * @vdevice: virtual target device
*
* Uses the ISR, but with special processing.
* MUST be single-threaded.