-/*
+/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
*
* o Each (bus,lun) is a logical device in I2O. We keep a map
* table. We spoof failed selection for unmapped units
- * o Request sense buffers can come back for free.
+ * o Request sense buffers can come back for free.
* o Scatter gather is a bit dynamic. We have to investigate at
* setup time.
* o Some of our resources are dynamically shared. The i2o core
* needs a message reservation protocol to avoid swap v net
* deadlocking. We need to back off queue requests.
- *
+ *
* In general the firmware wants to help. Where its help isn't performance
* useful we just ignore the aid. Its not worth the code in truth.
*
* Fix the resource management problems.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/prefetch.h>
#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/i2o.h>
+
#include <asm/dma.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/atomic.h>
-#include <linux/blkdev.h>
-#include <linux/i2o.h>
-#include "../../scsi/scsi.h"
-#include "../../scsi/hosts.h"
-
-#if BITS_PER_LONG == 64
-#error FIXME: driver does not support 64-bit platforms
-#endif
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
#define VERSION_STRING "Version 0.1.2"
-//#define DRIVERDEBUG
+static struct i2o_driver i2o_scsi_driver;
-#ifdef DRIVERDEBUG
-#define dprintk(s, args...) printk(s, ## args)
-#else
-#define dprintk(s, args...)
-#endif
+static int i2o_scsi_max_id = 16;
+static int i2o_scsi_max_lun = 8;
+
+struct i2o_scsi_host {
+ struct Scsi_Host *scsi_host; /* pointer to the SCSI host */
+ struct i2o_controller *iop; /* pointer to the I2O controller */
+ struct i2o_device *channel[0]; /* channel->i2o_dev mapping table */
+};
+
+static struct scsi_host_template i2o_scsi_host_template;
#define I2O_SCSI_CAN_QUEUE 4
-#define MAXHOSTS 32
-struct i2o_scsi_host
-{
- struct i2o_controller *controller;
- s16 task[16][8]; /* Allow 16 devices for now */
- unsigned long tagclock[16][8]; /* Tag clock for queueing */
- s16 bus_task; /* The adapter TID */
+/* SCSI OSM class handling definition */
+static struct i2o_class_id i2o_scsi_class_id[] = {
+ {I2O_CLASS_SCSI_PERIPHERAL},
+ {I2O_CLASS_END}
};
-static int scsi_context;
-static int lun_done;
-static int i2o_scsi_hosts;
+static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
+{
+ struct i2o_scsi_host *i2o_shost;
+ struct i2o_device *i2o_dev;
+ struct Scsi_Host *scsi_host;
+ int max_channel = 0;
+ u8 type;
+ int i;
+ size_t size;
+ i2o_status_block *sb;
-static u32 *retry[32];
-static struct i2o_controller *retry_ctrl[32];
-static struct timer_list retry_timer;
-static spinlock_t retry_lock = SPIN_LOCK_UNLOCKED;
-static int retry_ct = 0;
+ list_for_each_entry(i2o_dev, &c->devices, list)
+ if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) {
+ if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1)) /* SCSI bus */
+ max_channel++;
+ }
-static atomic_t queue_depth;
+ if (!max_channel) {
+ printk(KERN_WARNING "scsi-osm: no channels found on %s\n",
+ c->name);
+ return ERR_PTR(-EFAULT);
+ }
-/*
- * SG Chain buffer support...
+ size = max_channel * sizeof(struct i2o_device *)
+ + sizeof(struct i2o_scsi_host);
+
+ scsi_host = scsi_host_alloc(&i2o_scsi_host_template, size);
+ if (!scsi_host) {
+ printk(KERN_WARNING "scsi-osm: Could not allocate SCSI host\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ scsi_host->max_channel = max_channel - 1;
+ scsi_host->max_id = i2o_scsi_max_id;
+ scsi_host->max_lun = i2o_scsi_max_lun;
+ scsi_host->this_id = c->unit;
+
+ sb = c->status_block.virt;
+
+ scsi_host->sg_tablesize = (sb->inbound_frame_size -
+ sizeof(struct i2o_message) / 4 - 6) / 2;
+
+ i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata;
+ i2o_shost->scsi_host = scsi_host;
+ i2o_shost->iop = c;
+
+ i = 0;
+ list_for_each_entry(i2o_dev, &c->devices, list)
+ if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) {
+ if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1)) /* only SCSI bus */
+ i2o_shost->channel[i++] = i2o_dev;
+
+ if (i >= max_channel)
+ break;
+ }
+
+ return i2o_shost;
+};
+
+/**
+ * i2o_scsi_get_host - Get an I2O SCSI host
+ * @c: I2O controller to for which to get the SCSI host
+ *
+ * If the I2O controller already exists as SCSI host, the SCSI host
+ * is returned, otherwise the I2O controller is added to the SCSI
+ * core.
+ *
+ * Returns pointer to the I2O SCSI host on success or NULL on failure.
*/
+static struct i2o_scsi_host *i2o_scsi_get_host(struct i2o_controller *c)
+{
+ return c->driver_data[i2o_scsi_driver.context];
+};
-#define SG_MAX_FRAGS 64
+/**
+ * i2o_scsi_remove - Remove I2O device from SCSI core
+ * @dev: device which should be removed
+ *
+ * Removes the I2O device from the SCSI core again.
+ *
+ * Returns 0 on success.
+ */
+static int i2o_scsi_remove(struct device *dev)
+{
+ struct i2o_device *i2o_dev = to_i2o_device(dev);
+ struct i2o_controller *c = i2o_dev->iop;
+ struct i2o_scsi_host *i2o_shost;
+ struct scsi_device *scsi_dev;
+
+ i2o_shost = i2o_scsi_get_host(c);
+
+ shost_for_each_device(scsi_dev, i2o_shost->scsi_host)
+ if (scsi_dev->hostdata == i2o_dev) {
+ scsi_remove_device(scsi_dev);
+ scsi_device_put(scsi_dev);
+ break;
+ }
-/*
- * FIXME: we should allocate one of these per bus we find as we
- * locate them not in a lump at boot.
+ return 0;
+};
+
+/**
+ * i2o_scsi_probe - verify if dev is a I2O SCSI device and install it
+ * @dev: device to verify if it is a I2O SCSI device
+ *
+ * Retrieve channel, id and lun for I2O device. If everthing goes well
+ * register the I2O device as SCSI device on the I2O SCSI controller.
+ *
+ * Returns 0 on success or negative error code on failure.
*/
-
-typedef struct _chain_buf
+static int i2o_scsi_probe(struct device *dev)
{
- u32 sg_flags_cnt[SG_MAX_FRAGS];
- u32 sg_buf[SG_MAX_FRAGS];
-} chain_buf;
+ struct i2o_device *i2o_dev = to_i2o_device(dev);
+ struct i2o_controller *c = i2o_dev->iop;
+ struct i2o_scsi_host *i2o_shost;
+ struct Scsi_Host *scsi_host;
+ struct i2o_device *parent;
+ struct scsi_device *scsi_dev;
+ u32 id;
+ u64 lun;
+ int channel = -1;
+ int i;
+
+ i2o_shost = i2o_scsi_get_host(c);
+ if (!i2o_shost)
+ return -EFAULT;
+
+ scsi_host = i2o_shost->scsi_host;
+
+ if (i2o_parm_field_get(i2o_dev, 0, 3, &id, 4) < 0)
+ return -EFAULT;
-#define SG_CHAIN_BUF_SZ sizeof(chain_buf)
+ if (id >= scsi_host->max_id) {
+ printk(KERN_WARNING "scsi-osm: SCSI device id (%d) >= max_id "
+ "of I2O host (%d)", id, scsi_host->max_id);
+ return -EFAULT;
+ }
+
+ if (i2o_parm_field_get(i2o_dev, 0, 4, &lun, 8) < 0)
+ return -EFAULT;
+ if (lun >= scsi_host->max_lun) {
+ printk(KERN_WARNING "scsi-osm: SCSI device id (%d) >= max_lun "
+ "of I2O host (%d)", (unsigned int)lun,
+ scsi_host->max_lun);
+ return -EFAULT;
+ }
+
+ parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
+ if (!parent) {
+ printk(KERN_WARNING "scsi-osm: can not find parent of device "
+ "%03x\n", i2o_dev->lct_data.tid);
+ return -EFAULT;
+ }
+
+ for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
+ if (i2o_shost->channel[i] == parent)
+ channel = i;
+
+ if (channel == -1) {
+ printk(KERN_WARNING "scsi-osm: can not find channel of device "
+ "%03x\n", i2o_dev->lct_data.tid);
+ return -EFAULT;
+ }
+
+ scsi_dev =
+ __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev);
-#define SG_MAX_BUFS (i2o_num_controllers * I2O_SCSI_CAN_QUEUE)
-#define SG_CHAIN_POOL_SZ (SG_MAX_BUFS * SG_CHAIN_BUF_SZ)
+ if (!scsi_dev) {
+ printk(KERN_WARNING "scsi-osm: can not add SCSI device "
+ "%03x\n", i2o_dev->lct_data.tid);
+ return -EFAULT;
+ }
-static int max_sg_len = 0;
-static chain_buf *sg_chain_pool = NULL;
-static int sg_chain_tag = 0;
-static int sg_max_frags = SG_MAX_FRAGS;
+ pr_debug("Added new SCSI device %03x (cannel: %d, id: %d, lun: %d)\n",
+ i2o_dev->lct_data.tid, channel, id, (unsigned int)lun);
+ return 0;
+};
+
+static const char *i2o_scsi_info(struct Scsi_Host *SChost)
+{
+ struct i2o_scsi_host *hostdata;
+ hostdata = (struct i2o_scsi_host *)SChost->hostdata;
+ return hostdata->iop->name;
+}
+
+#if 0
/**
* i2o_retry_run - retry on timeout
* @f: unused
* and its default handler should be this in the core, and this
* call a 2nd "I give up" handler in the OSM ?
*/
-
+
static void i2o_retry_run(unsigned long f)
{
int i;
unsigned long flags;
-
+
spin_lock_irqsave(&retry_lock, flags);
- for(i=0;i<retry_ct;i++)
+ for (i = 0; i < retry_ct; i++)
i2o_post_message(retry_ctrl[i], virt_to_bus(retry[i]));
- retry_ct=0;
+ retry_ct = 0;
spin_unlock_irqrestore(&retry_lock, flags);
}
* Turn each of the pending commands into a NOP and post it back
* to the controller to clear it.
*/
-
+
static void flush_pending(void)
{
int i;
unsigned long flags;
-
+
spin_lock_irqsave(&retry_lock, flags);
- for(i=0;i<retry_ct;i++)
- {
- retry[i][0]&=~0xFFFFFF;
- retry[i][0]|=I2O_CMD_UTIL_NOP<<24;
- i2o_post_message(retry_ctrl[i],virt_to_bus(retry[i]));
+ for (i = 0; i < retry_ct; i++) {
+ retry[i][0] &= ~0xFFFFFF;
+ retry[i][0] |= I2O_CMD_UTIL_NOP << 24;
+ i2o_post_message(retry_ctrl[i], virt_to_bus(retry[i]));
}
- retry_ct=0;
+ retry_ct = 0;
spin_unlock_irqrestore(&retry_lock, flags);
}
+#endif
/**
- * i2o_scsi_reply - scsi message reply processor
- * @h: our i2o handler
+ * i2o_scsi_reply - SCSI OSM message reply handler
* @c: controller issuing the reply
- * @msg: the message from the controller (mapped)
+ * @m: message id for flushing
+ * @msg: the message from the controller
*
* Process reply messages (interrupts in normal scsi controller think).
* We can get a variety of messages to process. The normal path is
* scsi command completions. We must also deal with IOP failures,
* the reply to a bus reset and the reply to a LUN query.
*
- * Locks: the queue lock is taken to call the completion handler
+ * Returns 0 on success and if the reply should not be flushed or > 0
+ * on success and if the reply should be flushed. Returns negative error
+ * code on failure and if the reply should be flushed.
*/
-
-static void i2o_scsi_reply(struct i2o_handler *h, struct i2o_controller *c, struct i2o_message *msg)
+static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
+ struct i2o_message *msg)
{
- Scsi_Cmnd *current_command;
- spinlock_t *lock;
- u32 *m = (u32 *)msg;
- u8 as,ds,st;
- unsigned long flags;
+ struct scsi_cmnd *cmd;
+ struct device *dev;
+ u8 as, ds, st;
+
+ cmd = i2o_cntxt_list_get(c, readl(&msg->u.s.tcntxt));
+
+ if (msg->u.head[0] & (1 << 13)) {
+ struct i2o_message *pmsg; /* preserved message */
+ u32 pm;
+
+ pm = readl(&msg->body[3]);
+
+ pmsg = c->in_queue.virt + pm;
- if(m[0] & (1<<13))
- {
printk("IOP fail.\n");
printk("From %d To %d Cmd %d.\n",
- (m[1]>>12)&0xFFF,
- m[1]&0xFFF,
- m[1]>>24);
- printk("Failure Code %d.\n", m[4]>>24);
- if(m[4]&(1<<16))
+ (msg->u.head[1] >> 12) & 0xFFF,
+ msg->u.head[1] & 0xFFF, msg->u.head[1] >> 24);
+ printk("Failure Code %d.\n", msg->body[0] >> 24);
+ if (msg->body[0] & (1 << 16))
printk("Format error.\n");
- if(m[4]&(1<<17))
+ if (msg->body[0] & (1 << 17))
printk("Path error.\n");
- if(m[4]&(1<<18))
+ if (msg->body[0] & (1 << 18))
printk("Path State.\n");
- if(m[4]&(1<<18))
+ if (msg->body[0] & (1 << 18))
printk("Congestion.\n");
-
- m=(u32 *)bus_to_virt(m[7]);
- printk("Failing message is %p.\n", m);
-
- /* This isnt a fast path .. */
- spin_lock_irqsave(&retry_lock, flags);
-
- if((m[4]&(1<<18)) && retry_ct < 32)
- {
- retry_ctrl[retry_ct]=c;
- retry[retry_ct]=m;
- if(!retry_ct++)
- {
- retry_timer.expires=jiffies+1;
- add_timer(&retry_timer);
- }
- spin_unlock_irqrestore(&retry_lock, flags);
- }
- else
- {
- spin_unlock_irqrestore(&retry_lock, flags);
- /* Create a scsi error for this */
- current_command = (Scsi_Cmnd *)m[3];
- lock = current_command->device->host->host_lock;
- printk("Aborted %ld\n", current_command->serial_number);
-
- spin_lock_irqsave(lock, flags);
- current_command->result = DID_ERROR << 16;
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(lock, flags);
-
- /* Now flush the message by making it a NOP */
- m[0]&=0x00FFFFFF;
- m[0]|=(I2O_CMD_UTIL_NOP)<<24;
- i2o_post_message(c,virt_to_bus(m));
- }
- return;
- }
-
- prefetchw(&queue_depth);
-
-
- /*
- * Low byte is device status, next is adapter status,
- * (then one byte reserved), then request status.
- */
- ds=(u8)le32_to_cpu(m[4]);
- as=(u8)le32_to_cpu(m[4]>>8);
- st=(u8)le32_to_cpu(m[4]>>24);
-
- dprintk(KERN_INFO "i2o got a scsi reply %08X: ", m[0]);
- dprintk(KERN_INFO "m[2]=%08X: ", m[2]);
- dprintk(KERN_INFO "m[4]=%08X\n", m[4]);
-
- if(m[2]&0x80000000)
- {
- if(m[2]&0x40000000)
- {
- dprintk(KERN_INFO "Event.\n");
- lun_done=1;
- return;
- }
- printk(KERN_INFO "i2o_scsi: bus reset completed.\n");
- return;
+
+ printk("Failing message is %p.\n", pmsg);
+
+ cmd = i2o_cntxt_list_get(c, readl(&pmsg->u.s.tcntxt));
+ if (!cmd)
+ return 1;
+
+ printk("Aborted %ld\n", cmd->serial_number);
+ cmd->result = DID_ERROR << 16;
+ cmd->scsi_done(cmd);
+
+ /* Now flush the message by making it a NOP */
+ i2o_msg_nop(c, pm);
+
+ return 1;
}
+
/*
- * FIXME: 64bit breakage
+ * Low byte is device status, next is adapter status,
+ * (then one byte reserved), then request status.
*/
+ ds = (u8) readl(&msg->body[0]);
+ as = (u8) (readl(&msg->body[0]) >> 8);
+ st = (u8) (readl(&msg->body[0]) >> 24);
- current_command = (Scsi_Cmnd *)m[3];
-
/*
- * Is this a control request coming back - eg an abort ?
+ * Is this a control request coming back - eg an abort ?
*/
-
- if(current_command==NULL)
- {
- if(st)
- dprintk(KERN_WARNING "SCSI abort: %08X", m[4]);
- dprintk(KERN_INFO "SCSI abort completed.\n");
- return;
- }
-
- dprintk(KERN_INFO "Completed %ld\n", current_command->serial_number);
-
- atomic_dec(&queue_depth);
-
- if(st == 0x06)
- {
- if(le32_to_cpu(m[5]) < current_command->underflow)
- {
- int i;
- printk(KERN_ERR "SCSI: underflow 0x%08X 0x%08X\n",
- le32_to_cpu(m[5]), current_command->underflow);
- printk("Cmd: ");
- for(i=0;i<15;i++)
- printk("%02X ", current_command->cmnd[i]);
- printk(".\n");
- }
- else st=0;
- }
-
- if(st)
- {
- /* An error has occurred */
- dprintk(KERN_WARNING "SCSI error %08X", m[4]);
-
- if (as == 0x0E)
- /* SCSI Reset */
- current_command->result = DID_RESET << 16;
- else if (as == 0x0F)
- current_command->result = DID_PARITY << 16;
- else
- current_command->result = DID_ERROR << 16;
+ if (!cmd) {
+ if (st)
+ printk(KERN_WARNING "SCSI abort: %08X",
+ readl(&msg->body[0]));
+ printk(KERN_INFO "SCSI abort completed.\n");
+ return -EFAULT;
}
- else
- /*
- * It worked maybe ?
- */
- current_command->result = DID_OK << 16 | ds;
-
- if (current_command->use_sg)
- pci_unmap_sg(c->pdev, (struct scatterlist *)current_command->buffer, current_command->use_sg, scsi_to_pci_dma_dir(current_command->sc_data_direction));
- else if (current_command->request_bufflen)
- pci_unmap_single(c->pdev, (dma_addr_t)((long)current_command->SCp.ptr), current_command->request_bufflen, scsi_to_pci_dma_dir(current_command->sc_data_direction));
-
- lock = current_command->device->host->host_lock;
- spin_lock_irqsave(lock, flags);
- current_command->scsi_done(current_command);
- spin_unlock_irqrestore(lock, flags);
- return;
-}
-struct i2o_handler i2o_scsi_handler = {
- .reply = i2o_scsi_reply,
- .name = "I2O SCSI OSM",
- .class = I2O_CLASS_SCSI_PERIPHERAL,
-};
+ pr_debug("Completed %ld\n", cmd->serial_number);
-/**
- * i2o_find_lun - report the lun of an i2o device
- * @c: i2o controller owning the device
- * @d: i2o disk device
- * @target: filled in with target id
- * @lun: filled in with target lun
- *
- * Query an I2O device to find out its SCSI lun and target numbering. We
- * don't currently handle some of the fancy SCSI-3 stuff although our
- * querying is sufficient to do so.
- */
-
-static int i2o_find_lun(struct i2o_controller *c, struct i2o_device *d, int *target, int *lun)
-{
- u8 reply[8];
-
- if(i2o_query_scalar(c, d->lct_data.tid, 0, 3, reply, 4)<0)
- return -1;
-
- *target=reply[0];
-
- if(i2o_query_scalar(c, d->lct_data.tid, 0, 4, reply, 8)<0)
- return -1;
-
- *lun=reply[1];
-
- dprintk(KERN_INFO "SCSI (%d,%d)\n", *target, *lun);
- return 0;
-}
+ if (st) {
+ u32 count, error;
+ /* An error has occurred */
-/**
- * i2o_scsi_init - initialize an i2o device for scsi
- * @c: i2o controller owning the device
- * @d: scsi controller
- * @shpnt: scsi device we wish it to become
- *
- * Enumerate the scsi peripheral/fibre channel peripheral class
- * devices that are children of the controller. From that we build
- * a translation map for the command queue code. Since I2O works on
- * its own tid's we effectively have to think backwards to get what
- * the midlayer wants
- */
-
-static void i2o_scsi_init(struct i2o_controller *c, struct i2o_device *d, struct Scsi_Host *shpnt)
-{
- struct i2o_device *unit;
- struct i2o_scsi_host *h =(struct i2o_scsi_host *)shpnt->hostdata;
- int lun;
- int target;
-
- h->controller=c;
- h->bus_task=d->lct_data.tid;
-
- for(target=0;target<16;target++)
- for(lun=0;lun<8;lun++)
- h->task[target][lun] = -1;
-
- for(unit=c->devices;unit!=NULL;unit=unit->next)
- {
- dprintk(KERN_INFO "Class %03X, parent %d, want %d.\n",
- unit->lct_data.class_id, unit->lct_data.parent_tid, d->lct_data.tid);
-
- /* Only look at scsi and fc devices */
- if ( (unit->lct_data.class_id != I2O_CLASS_SCSI_PERIPHERAL)
- && (unit->lct_data.class_id != I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL)
- )
- continue;
-
- /* On our bus ? */
- dprintk(KERN_INFO "Found a disk (%d).\n", unit->lct_data.tid);
- if ((unit->lct_data.parent_tid == d->lct_data.tid)
- || (unit->lct_data.parent_tid == d->lct_data.parent_tid)
- )
- {
- u16 limit;
- dprintk(KERN_INFO "Its ours.\n");
- if(i2o_find_lun(c, unit, &target, &lun)==-1)
- {
- printk(KERN_ERR "i2o_scsi: Unable to get lun for tid %d.\n", unit->lct_data.tid);
- continue;
+ switch (st) {
+ case 0x06:
+ count = readl(&msg->body[1]);
+ if (count < cmd->underflow) {
+ int i;
+ printk(KERN_ERR "SCSI: underflow 0x%08X 0x%08X"
+ "\n", count, cmd->underflow);
+ printk("Cmd: ");
+ for (i = 0; i < 15; i++)
+ printk("%02X ", cmd->cmnd[i]);
+ printk(".\n");
+ cmd->result = (DID_ERROR << 16);
}
- dprintk(KERN_INFO "Found disk %d %d.\n", target, lun);
- h->task[target][lun]=unit->lct_data.tid;
- h->tagclock[target][lun]=jiffies;
-
- /* Get the max fragments/request */
- i2o_query_scalar(c, d->lct_data.tid, 0xF103, 3, &limit, 2);
-
- /* sanity */
- if ( limit == 0 )
- {
- printk(KERN_WARNING "i2o_scsi: Ignoring unreasonable SG limit of 0 from IOP!\n");
- limit = 1;
+ break;
+
+ default:
+ error = readl(&msg->body[0]);
+
+ printk(KERN_ERR "scsi-osm: SCSI error %08x\n", error);
+
+ if ((error & 0xff) == 0x02 /*CHECK_CONDITION */ ) {
+ int i;
+ u32 len = sizeof(cmd->sense_buffer);
+ len = (len > 40) ? 40 : len;
+ // Copy over the sense data
+ memcpy(cmd->sense_buffer, (void *)&msg->body[3],
+ len);
+ for (i = 0; i <= len; i++)
+ printk(KERN_INFO "%02x\n",
+ cmd->sense_buffer[i]);
+ if (cmd->sense_buffer[0] == 0x70
+ && cmd->sense_buffer[2] == DATA_PROTECT) {
+ /* This is to handle an array failed */
+ cmd->result = (DID_TIME_OUT << 16);
+ printk(KERN_WARNING "%s: SCSI Data "
+ "Protect-Device (%d,%d,%d) "
+ "hba_status=0x%x, dev_status="
+ "0x%x, cmd=0x%x\n", c->name,
+ (u32) cmd->device->channel,
+ (u32) cmd->device->id,
+ (u32) cmd->device->lun,
+ (error >> 8) & 0xff,
+ error & 0xff, cmd->cmnd[0]);
+ } else
+ cmd->result = (DID_ERROR << 16);
+
+ break;
}
-
- shpnt->sg_tablesize = limit;
- dprintk(KERN_INFO "i2o_scsi: set scatter-gather to %d.\n",
- shpnt->sg_tablesize);
+ switch (as) {
+ case 0x0E:
+ /* SCSI Reset */
+ cmd->result = DID_RESET << 16;
+ break;
+
+ case 0x0F:
+ cmd->result = DID_PARITY << 16;
+ break;
+
+ default:
+ cmd->result = DID_ERROR << 16;
+ break;
+ }
+
+ break;
}
- }
-}
+
+ cmd->scsi_done(cmd);
+ return 1;
+ }
+
+ cmd->result = DID_OK << 16 | ds;
+
+ cmd->scsi_done(cmd);
+
+ dev = &c->pdev->dev;
+ if (cmd->use_sg)
+ dma_unmap_sg(dev, (struct scatterlist *)cmd->buffer,
+ cmd->use_sg, cmd->sc_data_direction);
+ else if (cmd->request_bufflen)
+ dma_unmap_single(dev, (dma_addr_t) ((long)cmd->SCp.ptr),
+ cmd->request_bufflen, cmd->sc_data_direction);
+
+ return 1;
+};
/**
- * i2o_scsi_detect - probe for I2O scsi devices
- * @tpnt: scsi layer template
+ * i2o_scsi_notify_controller_add - Retrieve notifications of added
+ * controllers
+ * @c: the controller which was added
*
- * I2O is a little odd here. The I2O core already knows what the
- * devices are. It also knows them by disk and tape as well as
- * by controller. We register each I2O scsi class object as a
- * scsi controller and then let the enumeration fake up the rest
+ * If a I2O controller is added, we catch the notification to add a
+ * corresponding Scsi_Host.
*/
-
-static int i2o_scsi_detect(Scsi_Host_Template * tpnt)
+void i2o_scsi_notify_controller_add(struct i2o_controller *c)
{
- struct Scsi_Host *shpnt = NULL;
- int i;
- int count;
-
- printk(KERN_INFO "i2o_scsi.c: %s\n", VERSION_STRING);
+ struct i2o_scsi_host *i2o_shost;
+ int rc;
- if(i2o_install_handler(&i2o_scsi_handler)<0)
- {
- printk(KERN_ERR "i2o_scsi: Unable to install OSM handler.\n");
- return 0;
- }
- scsi_context = i2o_scsi_handler.context;
-
- if((sg_chain_pool = kmalloc(SG_CHAIN_POOL_SZ, GFP_KERNEL)) == NULL)
- {
- printk(KERN_INFO "i2o_scsi: Unable to alloc %d byte SG chain buffer pool.\n", SG_CHAIN_POOL_SZ);
- printk(KERN_INFO "i2o_scsi: SG chaining DISABLED!\n");
- sg_max_frags = 11;
- }
- else
- {
- printk(KERN_INFO " chain_pool: %d bytes @ %p\n", SG_CHAIN_POOL_SZ, sg_chain_pool);
- printk(KERN_INFO " (%d byte buffers X %d can_queue X %d i2o controllers)\n",
- SG_CHAIN_BUF_SZ, I2O_SCSI_CAN_QUEUE, i2o_num_controllers);
- sg_max_frags = SG_MAX_FRAGS; // 64
- }
-
- init_timer(&retry_timer);
- retry_timer.data = 0UL;
- retry_timer.function = i2o_retry_run;
-
-// printk("SCSI OSM at %d.\n", scsi_context);
-
- for (count = 0, i = 0; i < MAX_I2O_CONTROLLERS; i++)
- {
- struct i2o_controller *c=i2o_find_controller(i);
- struct i2o_device *d;
- /*
- * This controller doesn't exist.
- */
-
- if(c==NULL)
- continue;
-
- /*
- * Fixme - we need some altered device locking. This
- * is racing with device addition in theory. Easy to fix.
- */
-
- for(d=c->devices;d!=NULL;d=d->next)
- {
- /*
- * bus_adapter, SCSI (obsolete), or FibreChannel busses only
- */
- if( (d->lct_data.class_id!=I2O_CLASS_BUS_ADAPTER_PORT) // bus_adapter
-// && (d->lct_data.class_id!=I2O_CLASS_FIBRE_CHANNEL_PORT) // FC_PORT
- )
- continue;
-
- shpnt = scsi_register(tpnt, sizeof(struct i2o_scsi_host));
- if(shpnt==NULL)
- continue;
- shpnt->unique_id = (u32)d;
- shpnt->io_port = 0;
- shpnt->n_io_port = 0;
- shpnt->irq = 0;
- shpnt->this_id = /* Good question */15;
- i2o_scsi_init(c, d, shpnt);
- count++;
- }
- }
- i2o_scsi_hosts = count;
-
- if(count==0)
- {
- if(sg_chain_pool!=NULL)
- {
- kfree(sg_chain_pool);
- sg_chain_pool = NULL;
- }
- flush_pending();
- del_timer(&retry_timer);
- i2o_remove_handler(&i2o_scsi_handler);
+ i2o_shost = i2o_scsi_host_alloc(c);
+ if (IS_ERR(i2o_shost)) {
+ printk(KERN_ERR "scsi-osm: Could not initialize"
+ " SCSI host\n");
+ return;
}
-
- return count;
-}
-static int i2o_scsi_release(struct Scsi_Host *host)
-{
- if(--i2o_scsi_hosts==0)
- {
- if(sg_chain_pool!=NULL)
- {
- kfree(sg_chain_pool);
- sg_chain_pool = NULL;
- }
- flush_pending();
- del_timer(&retry_timer);
- i2o_remove_handler(&i2o_scsi_handler);
+ rc = scsi_add_host(i2o_shost->scsi_host, &c->device);
+ if (rc) {
+ printk(KERN_ERR "scsi-osm: Could not add SCSI "
+ "host\n");
+ scsi_host_put(i2o_shost->scsi_host);
+ return;
}
- scsi_unregister(host);
-
- return 0;
-}
+ c->driver_data[i2o_scsi_driver.context] = i2o_shost;
+ pr_debug("new I2O SCSI host added\n");
+};
-static const char *i2o_scsi_info(struct Scsi_Host *SChost)
+/**
+ * i2o_scsi_notify_controller_remove - Retrieve notifications of removed
+ * controllers
+ * @c: the controller which was removed
+ *
+ * If a I2O controller is removed, we catch the notification to remove the
+ * corresponding Scsi_Host.
+ */
+void i2o_scsi_notify_controller_remove(struct i2o_controller *c)
{
- struct i2o_scsi_host *hostdata;
- hostdata = (struct i2o_scsi_host *)SChost->hostdata;
- return(&hostdata->controller->name[0]);
-}
+ struct i2o_scsi_host *i2o_shost;
+ i2o_shost = i2o_scsi_get_host(c);
+ if (!i2o_shost)
+ return;
+
+ c->driver_data[i2o_scsi_driver.context] = NULL;
+
+ scsi_remove_host(i2o_shost->scsi_host);
+ scsi_host_put(i2o_shost->scsi_host);
+ pr_debug("I2O SCSI host removed\n");
+};
+
+/* SCSI OSM driver struct */
+static struct i2o_driver i2o_scsi_driver = {
+ .name = "scsi-osm",
+ .reply = i2o_scsi_reply,
+ .classes = i2o_scsi_class_id,
+ .notify_controller_add = i2o_scsi_notify_controller_add,
+ .notify_controller_remove = i2o_scsi_notify_controller_remove,
+ .driver = {
+ .probe = i2o_scsi_probe,
+ .remove = i2o_scsi_remove,
+ },
+};
/**
- * i2o_scsi_queuecommand - queue a SCSI command
+ * i2o_scsi_queuecommand - queue a SCSI command
* @SCpnt: scsi command pointer
* @done: callback for completion
*
- * Issue a scsi comamnd asynchronously. Return 0 on success or 1 if
- * we hit an error (normally message queue congestion). The only
+ * Issue a scsi command asynchronously. Return 0 on success or 1 if
+ * we hit an error (normally message queue congestion). The only
* minor complication here is that I2O deals with the device addressing
* so we have to map the bus/dev/lun back to an I2O handle as well
- * as faking absent devices ourself.
+ * as faking absent devices ourself.
*
* Locks: takes the controller lock on error path only
*/
-
-static int i2o_scsi_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+
+static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
+ void (*done) (struct scsi_cmnd *))
{
- int i;
- int tid;
struct i2o_controller *c;
- Scsi_Cmnd *current_command;
struct Scsi_Host *host;
- struct i2o_scsi_host *hostdata;
- u32 *msg, *mptr;
+ struct i2o_device *i2o_dev;
+ struct device *dev;
+ int tid;
+ struct i2o_message *msg;
u32 m;
- u32 *lenptr;
- int direction;
- int scsidir;
- u32 len;
- u32 reqlen;
- u32 tag;
- unsigned long flags;
-
- static int max_qd = 1;
-
+ u32 scsi_flags, sg_flags;
+ u32 *mptr, *lenptr;
+ u32 len, reqlen;
+ int i;
+
/*
- * Do the incoming paperwork
+ * Do the incoming paperwork
*/
-
+
+ i2o_dev = SCpnt->device->hostdata;
host = SCpnt->device->host;
- hostdata = (struct i2o_scsi_host *)host->hostdata;
-
- c = hostdata->controller;
- prefetch(c);
- prefetchw(&queue_depth);
+ c = i2o_dev->iop;
+ dev = &c->pdev->dev;
SCpnt->scsi_done = done;
-
- if(SCpnt->device->id > 15)
- {
- printk(KERN_ERR "i2o_scsi: Wild target %d.\n", SCpnt->device->id);
- return -1;
- }
-
- tid = hostdata->task[SCpnt->device->id][SCpnt->device->lun];
-
- dprintk(KERN_INFO "qcmd: Tid = %d\n", tid);
-
- current_command = SCpnt; /* set current command */
- current_command->scsi_done = done; /* set ptr to done function */
-
- /* We don't have such a device. Pretend we did the command
- and that selection timed out */
-
- if(tid == -1)
- {
+
+ if (unlikely(!i2o_dev)) {
+ printk(KERN_WARNING "scsi-osm: no I2O device in request\n");
SCpnt->result = DID_NO_CONNECT << 16;
- spin_lock_irqsave(host->host_lock, flags);
done(SCpnt);
- spin_unlock_irqrestore(host->host_lock, flags);
return 0;
}
-
- dprintk(KERN_INFO "Real scsi messages.\n");
+
+ tid = i2o_dev->lct_data.tid;
+
+ pr_debug("qcmd: Tid = %03x\n", tid);
+ pr_debug("Real scsi messages.\n");
/*
- * Obtain an I2O message. If there are none free then
- * throw it back to the scsi layer
- */
-
- m = le32_to_cpu(I2O_POST_READ32(c));
- if(m==0xFFFFFFFF)
- return 1;
+ * Obtain an I2O message. If there are none free then
+ * throw it back to the scsi layer
+ */
+
+ m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+ if (m == I2O_QUEUE_EMPTY)
+ return SCSI_MLQUEUE_HOST_BUSY;
- msg = (u32 *)(c->mem_offset + m);
-
/*
- * Put together a scsi execscb message
+ * Put together a scsi execscb message
*/
-
+
len = SCpnt->request_bufflen;
- direction = 0x00000000; // SGL IN (osm<--iop)
-
- if(SCpnt->sc_data_direction == SCSI_DATA_NONE)
- scsidir = 0x00000000; // DATA NO XFER
- else if(SCpnt->sc_data_direction == SCSI_DATA_WRITE)
- {
- direction=0x04000000; // SGL OUT (osm-->iop)
- scsidir =0x80000000; // DATA OUT (iop-->dev)
- }
- else if(SCpnt->sc_data_direction == SCSI_DATA_READ)
- {
- scsidir =0x40000000; // DATA IN (iop<--dev)
- }
- else
- {
+
+ switch (SCpnt->sc_data_direction) {
+ case PCI_DMA_NONE:
+ scsi_flags = 0x00000000; // DATA NO XFER
+ sg_flags = 0x00000000;
+ break;
+
+ case PCI_DMA_TODEVICE:
+ scsi_flags = 0x80000000; // DATA OUT (iop-->dev)
+ sg_flags = 0x14000000;
+ break;
+
+ case PCI_DMA_FROMDEVICE:
+ scsi_flags = 0x40000000; // DATA IN (iop<--dev)
+ sg_flags = 0x10000000;
+ break;
+
+ default:
/* Unknown - kill the command */
SCpnt->result = DID_NO_CONNECT << 16;
-
- /* We must lock the request queue while completing */
- spin_lock_irqsave(host->host_lock, flags);
done(SCpnt);
- spin_unlock_irqrestore(host->host_lock, flags);
return 0;
}
-
- i2o_raw_writel(I2O_CMD_SCSI_EXEC<<24|HOST_TID<<12|tid, &msg[1]);
- i2o_raw_writel(scsi_context, &msg[2]); /* So the I2O layer passes to us */
- /* Sorry 64bit folks. FIXME */
- i2o_raw_writel((u32)SCpnt, &msg[3]); /* We want the SCSI control block back */
+ writel(I2O_CMD_SCSI_EXEC << 24 | HOST_TID << 12 | tid, &msg->u.head[1]);
+ writel(i2o_scsi_driver.context, &msg->u.s.icntxt);
+
+ /* We want the SCSI control block back */
+ writel(i2o_cntxt_list_add(c, SCpnt), &msg->u.s.tcntxt);
/* LSI_920_PCI_QUIRK
*
- * Intermittant observations of msg frame word data corruption
- * observed on msg[4] after:
- * WRITE, READ-MODIFY-WRITE
- * operations. 19990606 -sralston
+ * Intermittant observations of msg frame word data corruption
+ * observed on msg[4] after:
+ * WRITE, READ-MODIFY-WRITE
+ * operations. 19990606 -sralston
*
- * (Hence we build this word via tag. Its good practice anyway
- * we don't want fetches over PCI needlessly)
+ * (Hence we build this word via tag. Its good practice anyway
+ * we don't want fetches over PCI needlessly)
*/
- tag=0;
-
+ /* Attach tags to the devices */
/*
- * Attach tags to the devices
- */
- if(SCpnt->device->tagged_supported)
- {
- /*
- * Some drives are too stupid to handle fairness issues
- * with tagged queueing. We throw in the odd ordered
- * tag to stop them starving themselves.
- */
- if((jiffies - hostdata->tagclock[SCpnt->device->id][SCpnt->device->lun]) > (5*HZ))
- {
- tag=0x01800000; /* ORDERED! */
- hostdata->tagclock[SCpnt->device->id][SCpnt->device->lun]=jiffies;
- }
- else
- {
- /* Hmmm... I always see value of 0 here,
- * of which {HEAD_OF, ORDERED, SIMPLE} are NOT! -sralston
- */
- if(SCpnt->tag == HEAD_OF_QUEUE_TAG)
- tag=0x01000000;
- else if(SCpnt->tag == ORDERED_QUEUE_TAG)
- tag=0x01800000;
- }
- }
+ if(SCpnt->device->tagged_supported) {
+ if(SCpnt->tag == HEAD_OF_QUEUE_TAG)
+ scsi_flags |= 0x01000000;
+ else if(SCpnt->tag == ORDERED_QUEUE_TAG)
+ scsi_flags |= 0x01800000;
+ }
+ */
/* Direction, disconnect ok, tag, CDBLen */
- i2o_raw_writel(scsidir|0x20000000|SCpnt->cmd_len|tag, &msg[4]);
+ writel(scsi_flags | 0x20200000 | SCpnt->cmd_len, &msg->body[0]);
- mptr=msg+5;
+ mptr = &msg->body[1];
- /*
- * Write SCSI command into the message - always 16 byte block
- */
-
+ /* Write SCSI command into the message - always 16 byte block */
memcpy_toio(mptr, SCpnt->cmnd, 16);
- mptr+=4;
- lenptr=mptr++; /* Remember me - fill in when we know */
-
+ mptr += 4;
+ lenptr = mptr++; /* Remember me - fill in when we know */
+
reqlen = 12; // SINGLE SGE
-
- /*
- * Now fill in the SGList and command
- *
- * FIXME: we need to set the sglist limits according to the
- * message size of the I2O controller. We might only have room
- * for 6 or so worst case
- */
-
- if(SCpnt->use_sg)
- {
- struct scatterlist *sg = (struct scatterlist *)SCpnt->request_buffer;
+
+ /* Now fill in the SGList and command */
+ if (SCpnt->use_sg) {
+ struct scatterlist *sg;
int sg_count;
- int chain = 0;
-
+
+ sg = SCpnt->request_buffer;
len = 0;
- sg_count = pci_map_sg(c->pdev, sg, SCpnt->use_sg,
- scsi_to_pci_dma_dir(SCpnt->sc_data_direction));
-
- /* FIXME: handle fail */
- if(!sg_count)
- BUG();
-
- if((sg_max_frags > 11) && (SCpnt->use_sg > 11))
- {
- chain = 1;
- /*
- * Need to chain!
- */
- i2o_raw_writel(direction|0xB0000000|(SCpnt->use_sg*2*4), mptr++);
- i2o_raw_writel(virt_to_bus(sg_chain_pool + sg_chain_tag), mptr);
- mptr = (u32*)(sg_chain_pool + sg_chain_tag);
- if (SCpnt->use_sg > max_sg_len)
- {
- max_sg_len = SCpnt->use_sg;
- printk("i2o_scsi: Chain SG! SCpnt=%p, SG_FragCnt=%d, SG_idx=%d\n",
- SCpnt, SCpnt->use_sg, sg_chain_tag);
- }
- if ( ++sg_chain_tag == SG_MAX_BUFS )
- sg_chain_tag = 0;
- for(i = 0 ; i < SCpnt->use_sg; i++)
- {
- *mptr++=cpu_to_le32(direction|0x10000000|sg_dma_len(sg));
- len+=sg_dma_len(sg);
- *mptr++=cpu_to_le32(sg_dma_address(sg));
- sg++;
- }
- mptr[-2]=cpu_to_le32(direction|0xD0000000|sg_dma_len(sg-1));
- }
- else
- {
- for(i = 0 ; i < SCpnt->use_sg; i++)
- {
- i2o_raw_writel(direction|0x10000000|sg_dma_len(sg), mptr++);
- len+=sg->length;
- i2o_raw_writel(sg_dma_address(sg), mptr++);
- sg++;
- }
+ sg_count = dma_map_sg(dev, sg, SCpnt->use_sg,
+ SCpnt->sc_data_direction);
- /* Make this an end of list. Again evade the 920 bug and
- unwanted PCI read traffic */
-
- i2o_raw_writel(direction|0xD0000000|sg_dma_len(sg-1), &mptr[-2]);
- }
-
- if(!chain)
- reqlen = mptr - msg;
-
- i2o_raw_writel(len, lenptr);
-
- if(len != SCpnt->underflow)
- printk("Cmd len %08X Cmd underflow %08X\n",
- len, SCpnt->underflow);
- }
- else
- {
- dprintk(KERN_INFO "non sg for %p, %d\n", SCpnt->request_buffer,
- SCpnt->request_bufflen);
- i2o_raw_writel(len = SCpnt->request_bufflen, lenptr);
- if(len == 0)
- {
- reqlen = 9;
+ if (unlikely(sg_count <= 0))
+ return -ENOMEM;
+
+ for (i = SCpnt->use_sg; i > 0; i--) {
+ if (i == 1)
+ sg_flags |= 0xC0000000;
+ writel(sg_flags | sg_dma_len(sg), mptr++);
+ writel(sg_dma_address(sg), mptr++);
+ len += sg_dma_len(sg);
+ sg++;
}
- else
- {
+
+ reqlen = mptr - &msg->u.head[0];
+ writel(len, lenptr);
+ } else {
+ len = SCpnt->request_bufflen;
+
+ writel(len, lenptr);
+
+ if (len > 0) {
dma_addr_t dma_addr;
- dma_addr = pci_map_single(c->pdev,
- SCpnt->request_buffer,
- SCpnt->request_bufflen,
- scsi_to_pci_dma_dir(SCpnt->sc_data_direction));
- if(dma_addr == 0)
- BUG(); /* How to handle ?? */
- SCpnt->SCp.ptr = (char *)(unsigned long) dma_addr;
- i2o_raw_writel(0xD0000000|direction|SCpnt->request_bufflen, mptr++);
- i2o_raw_writel(dma_addr, mptr++);
- }
+
+ dma_addr = dma_map_single(dev, SCpnt->request_buffer,
+ SCpnt->request_bufflen,
+ SCpnt->sc_data_direction);
+ if (!dma_addr)
+ return -ENOMEM;
+
+ SCpnt->SCp.ptr = (void *)(unsigned long)dma_addr;
+ sg_flags |= 0xC0000000;
+ writel(sg_flags | SCpnt->request_bufflen, mptr++);
+ writel(dma_addr, mptr++);
+ } else
+ reqlen = 9;
}
-
- /*
- * Stick the headers on
- */
- i2o_raw_writel(reqlen<<16 | SGL_OFFSET_10, msg);
-
+ /* Stick the headers on */
+ writel(reqlen << 16 | SGL_OFFSET_10, &msg->u.head[0]);
+
/* Queue the message */
- i2o_post_message(c,m);
-
- atomic_inc(&queue_depth);
-
- if(atomic_read(&queue_depth)> max_qd)
- {
- max_qd=atomic_read(&queue_depth);
- printk("Queue depth now %d.\n", max_qd);
- }
-
- mb();
- dprintk(KERN_INFO "Issued %ld\n", current_command->serial_number);
-
+ i2o_msg_post(c, m);
+
+ pr_debug("Issued %ld\n", SCpnt->serial_number);
+
return 0;
-}
+};
/**
- * i2o_scsi_abort - abort a running command
+ * i2o_scsi_abort - abort a running command
* @SCpnt: command to abort
*
* Ask the I2O controller to abort a command. This is an asynchrnous
- * process and oru callback handler will see the command complete
- * with an aborted message if it succeeds.
+ * process and our callback handler will see the command complete with an
+ * aborted message if it succeeds.
*
- * Locks: no locks are held or needed
+ * Returns 0 if the command is successfully aborted or negative error code
+ * on failure.
*/
-
-int i2o_scsi_abort(Scsi_Cmnd * SCpnt)
+int i2o_scsi_abort(struct scsi_cmnd *SCpnt)
{
+ struct i2o_device *i2o_dev;
struct i2o_controller *c;
- struct Scsi_Host *host;
- struct i2o_scsi_host *hostdata;
- unsigned long msg;
+ struct i2o_message *msg;
u32 m;
int tid;
- unsigned long timeout;
-
- printk(KERN_WARNING "i2o_scsi: Aborting command block.\n");
-
- host = SCpnt->device->host;
- hostdata = (struct i2o_scsi_host *)host->hostdata;
- tid = hostdata->task[SCpnt->device->id][SCpnt->device->lun];
- if(tid==-1)
- {
- printk(KERN_ERR "i2o_scsi: Impossible command to abort!\n");
- return FAILED;
- }
- c = hostdata->controller;
-
- spin_unlock_irq(host->host_lock);
-
- timeout = jiffies+2*HZ;
- do
- {
- m = le32_to_cpu(I2O_POST_READ32(c));
- if(m != 0xFFFFFFFF)
- break;
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
- mb();
- }
- while(time_before(jiffies, timeout));
-
- msg = c->mem_offset + m;
-
- i2o_raw_writel(FIVE_WORD_MSG_SIZE, msg);
- i2o_raw_writel(I2O_CMD_SCSI_ABORT<<24|HOST_TID<<12|tid, msg+4);
- i2o_raw_writel(scsi_context, msg+8);
- i2o_raw_writel(0, msg+12); /* Not needed for an abort */
- i2o_raw_writel((u32)SCpnt, msg+16);
- wmb();
- i2o_post_message(c,m);
- wmb();
-
- spin_lock_irq(host->host_lock);
- return SUCCESS;
-}
-
-/**
- * i2o_scsi_bus_reset - Issue a SCSI reset
- * @SCpnt: the command that caused the reset
- *
- * Perform a SCSI bus reset operation. In I2O this is just a message
- * we pass. I2O can do clever multi-initiator and shared reset stuff
- * but we don't support this.
- *
- * Locks: called with no lock held, requires no locks.
- */
-
-static int i2o_scsi_bus_reset(Scsi_Cmnd * SCpnt)
-{
- int tid;
- struct i2o_controller *c;
- struct Scsi_Host *host;
- struct i2o_scsi_host *hostdata;
- u32 m;
- unsigned long msg;
- unsigned long timeout;
-
-
- /*
- * Find the TID for the bus
- */
-
-
- host = SCpnt->device->host;
+ int status = FAILED;
- spin_unlock_irq(host->host_lock);
+ printk(KERN_WARNING "i2o_scsi: Aborting command block.\n");
- printk(KERN_WARNING "i2o_scsi: Attempting to reset the bus.\n");
+ i2o_dev = SCpnt->device->hostdata;
+ c = i2o_dev->iop;
+ tid = i2o_dev->lct_data.tid;
- hostdata = (struct i2o_scsi_host *)host->hostdata;
- tid = hostdata->bus_task;
- c = hostdata->controller;
+ m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+ if (m == I2O_QUEUE_EMPTY)
+ return SCSI_MLQUEUE_HOST_BUSY;
- /*
- * Now send a SCSI reset request. Any remaining commands
- * will be aborted by the IOP. We need to catch the reply
- * possibly ?
- */
-
- timeout = jiffies+2*HZ;
- do
- {
- m = le32_to_cpu(I2O_POST_READ32(c));
- if(m != 0xFFFFFFFF)
- break;
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
- mb();
- }
- while(time_before(jiffies, timeout));
-
-
- msg = c->mem_offset + m;
- i2o_raw_writel(FOUR_WORD_MSG_SIZE|SGL_OFFSET_0, msg);
- i2o_raw_writel(I2O_CMD_SCSI_BUSRESET<<24|HOST_TID<<12|tid, msg+4);
- i2o_raw_writel(scsi_context|0x80000000, msg+8);
- /* We use the top bit to split controller and unit transactions */
- /* Now store unit,tid so we can tie the completion back to a specific device */
- __raw_writel(c->unit << 16 | tid, msg+12);
- wmb();
-
- /* We want the command to complete after we return */
- spin_lock_irq(host->host_lock);
- i2o_post_message(c,m);
-
- /* Should we wait for the reset to complete ? */
- return SUCCESS;
-}
+ writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+ writel(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid,
+ &msg->u.head[1]);
+ writel(i2o_cntxt_list_get_ptr(c, SCpnt), &msg->body[0]);
-/**
- * i2o_scsi_host_reset - host reset callback
- * @SCpnt: command causing the reset
- *
- * An I2O controller can be many things at once. While we can
- * reset a controller the potential mess from doing so is vast, and
- * it's better to simply hold on and pray
- */
-
-static int i2o_scsi_host_reset(Scsi_Cmnd * SCpnt)
-{
- return FAILED;
-}
+ if (i2o_msg_post_wait(c, m, I2O_TIMEOUT_SCSI_SCB_ABORT))
+ status = SUCCESS;
-/**
- * i2o_scsi_device_reset - device reset callback
- * @SCpnt: command causing the reset
- *
- * I2O does not (AFAIK) support doing a device reset
- */
-
-static int i2o_scsi_device_reset(Scsi_Cmnd * SCpnt)
-{
- return FAILED;
+ return status;
}
/**
* i2o_scsi_bios_param - Invent disk geometry
- * @sdev: scsi device
+ * @sdev: scsi device
* @dev: block layer device
* @capacity: size in sectors
* @ip: geometry array
*
- * This is anyones guess quite frankly. We use the same rules everyone
+ * This is anyones guess quite frankly. We use the same rules everyone
* else appears to and hope. It seems to work.
*/
-
-static int i2o_scsi_bios_param(struct scsi_device * sdev,
- struct block_device *dev, sector_t capacity, int *ip)
+
+static int i2o_scsi_bios_param(struct scsi_device *sdev,
+ struct block_device *dev, sector_t capacity,
+ int *ip)
{
int size;
return 0;
}
-MODULE_AUTHOR("Red Hat Software");
-MODULE_LICENSE("GPL");
+static struct scsi_host_template i2o_scsi_host_template = {
+ .proc_name = "SCSI-OSM",
+ .name = "I2O SCSI Peripheral OSM",
+ .info = i2o_scsi_info,
+ .queuecommand = i2o_scsi_queuecommand,
+ .eh_abort_handler = i2o_scsi_abort,
+ .bios_param = i2o_scsi_bios_param,
+ .can_queue = I2O_SCSI_CAN_QUEUE,
+ .sg_tablesize = 8,
+ .cmd_per_lun = 6,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+/*
+int
+i2o_scsi_queuecommand(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+{
+ printk(KERN_INFO "queuecommand\n");
+ return SCSI_MLQUEUE_HOST_BUSY;
+};
+*/
+/**
+ * i2o_scsi_init - SCSI OSM initialization function
+ *
+ * Register SCSI OSM into I2O core.
+ *
+ * Returns 0 on success or negative error code on failure.
+ */
+static int __init i2o_scsi_init(void)
+{
+ int rc;
+
+ printk(KERN_INFO "I2O SCSI Peripheral OSM\n");
+
+ /* Register SCSI OSM into I2O core */
+ rc = i2o_driver_register(&i2o_scsi_driver);
+ if (rc) {
+ printk(KERN_ERR "scsi-osm: Could not register SCSI driver\n");
+ return rc;
+ }
+
+ return 0;
+};
-static Scsi_Host_Template driver_template = {
- .proc_name = "i2o_scsi",
- .name = "I2O SCSI Layer",
- .detect = i2o_scsi_detect,
- .release = i2o_scsi_release,
- .info = i2o_scsi_info,
- .queuecommand = i2o_scsi_queuecommand,
- .eh_abort_handler = i2o_scsi_abort,
- .eh_bus_reset_handler = i2o_scsi_bus_reset,
- .eh_device_reset_handler= i2o_scsi_device_reset,
- .eh_host_reset_handler = i2o_scsi_host_reset,
- .bios_param = i2o_scsi_bios_param,
- .can_queue = I2O_SCSI_CAN_QUEUE,
- .this_id = 15,
- .sg_tablesize = 8,
- .cmd_per_lun = 6,
- .use_clustering = ENABLE_CLUSTERING,
+/**
+ * i2o_scsi_exit - SCSI OSM exit function
+ *
+ * Unregisters SCSI OSM from I2O core.
+ */
+static void __exit i2o_scsi_exit(void)
+{
+ /* Unregister I2O SCSI OSM from I2O core */
+ i2o_driver_unregister(&i2o_scsi_driver);
};
-#include "../../scsi/scsi_module.c"
+MODULE_AUTHOR("Red Hat Software");
+MODULE_LICENSE("GPL");
+
+module_init(i2o_scsi_init);
+module_exit(i2o_scsi_exit);