*
* (C) 2000 Red Hat. GPL'd
*
- *
+ * $Id: cfi_cmdset_0020.c,v 1.22 2005/11/07 11:14:22 gleixner Exp $
+ *
* 10/10/2000 Nicolas Pitre <nico@cam.org>
* - completely revamped method functions so they are aware and
* independent of the flash geometry (buswidth, interleave, etc.)
* - modified Intel Command Set 0x0001 to support ST Advanced Architecture
* (command set 0x0020)
* - added a writev function
+ * 07/13/2005 Joern Engel <joern@wh.fh-wedel.de>
+ * - Plugged memory leak in cfi_staa_writev().
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported");
printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported");
for (i=9; i<32; i++) {
- if (extp->FeatureSupport & (1<<i))
+ if (extp->FeatureSupport & (1<<i))
printk(" - Unknown Bit %X: supported\n", i);
}
-
+
printk(" Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport);
printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported");
for (i=1; i<8; i++) {
if (extp->SuspendCmdSupport & (1<<i))
printk(" - Unknown Bit %X: supported\n", i);
}
-
+
printk(" Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask);
printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no");
printk(" - Valid Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no");
if (extp->BlkStatusRegMask & (1<<i))
printk(" - Unknown Bit %X Active: yes\n",i);
}
-
- printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n",
+
+ printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n",
extp->VccOptimal >> 8, extp->VccOptimal & 0xf);
if (extp->VppOptimal)
- printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n",
+ printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n",
extp->VppOptimal >> 8, extp->VppOptimal & 0xf);
}
#endif
{
struct cfi_private *cfi = map->fldrv_priv;
int i;
- __u32 base = cfi->chips[0].start;
if (cfi->cfi_mode) {
- /*
+ /*
* It's a real CFI chip, not one for which the probe
* routine faked a CFI structure. So we read the feature
* table from it.
*/
__u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR;
struct cfi_pri_intelext *extp;
- int ofs_factor = cfi->interleave * cfi->device_type;
- printk(" ST Microelectronics Extended Query Table at 0x%4.4X\n", adr);
- if (!adr)
+ extp = (struct cfi_pri_intelext*)cfi_read_pri(map, adr, sizeof(*extp), "ST Microelectronics");
+ if (!extp)
return NULL;
- /* Switch it into Query Mode */
- cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
-
- extp = kmalloc(sizeof(*extp), GFP_KERNEL);
- if (!extp) {
- printk(KERN_ERR "Failed to allocate memory\n");
+ if (extp->MajorVersion != '1' ||
+ (extp->MinorVersion < '0' || extp->MinorVersion > '3')) {
+ printk(KERN_ERR " Unknown ST Microelectronics"
+ " Extended Query version %c.%c.\n",
+ extp->MajorVersion, extp->MinorVersion);
+ kfree(extp);
return NULL;
}
-
- /* Read in the Extended Query Table */
- for (i=0; i<sizeof(*extp); i++) {
- ((unsigned char *)extp)[i] =
- cfi_read_query(map, (base+((adr+i)*ofs_factor)));
- }
-
- if (extp->MajorVersion != '1' ||
- (extp->MinorVersion < '0' || extp->MinorVersion > '2')) {
- printk(KERN_WARNING " Unknown staa Extended Query "
- "version %c.%c.\n", extp->MajorVersion,
- extp->MinorVersion);
- kfree(extp);
- return NULL;
- }
-
+
/* Do some byteswapping if necessary */
extp->FeatureSupport = cfi32_to_cpu(extp->FeatureSupport);
extp->BlkStatusRegMask = cfi32_to_cpu(extp->BlkStatusRegMask);
-
+
#ifdef DEBUG_CFI_FEATURES
/* Tell the user about it in lots of lovely detail */
cfi_tell_features(extp);
-#endif
+#endif
/* Install our own private info structure */
cfi->cmdset_priv = extp;
- }
+ }
for (i=0; i< cfi->numchips; i++) {
cfi->chips[i].word_write_time = 128;
cfi->chips[i].buffer_write_time = 128;
cfi->chips[i].erase_time = 1024;
- }
+ }
- /* Make sure it's in read mode */
- cfi_send_gen_cmd(0xff, 0x55, base, map, cfi, cfi->device_type, NULL);
return cfi_staa_setup(map);
}
+EXPORT_SYMBOL_GPL(cfi_cmdset_0020);
static struct mtd_info *cfi_staa_setup(struct map_info *map)
{
int i,j;
unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave;
- mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
+ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL);
//printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips);
if (!mtd) {
return NULL;
}
- memset(mtd, 0, sizeof(*mtd));
mtd->priv = map;
mtd->type = MTD_NORFLASH;
mtd->size = devsize * cfi->numchips;
mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips;
- mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
+ mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info)
* mtd->numeraseregions, GFP_KERNEL);
- if (!mtd->eraseregions) {
+ if (!mtd->eraseregions) {
printk(KERN_ERR "Failed to allocate memory for MTD erase region info\n");
kfree(cfi->cmdset_priv);
kfree(mtd);
return NULL;
}
-
+
for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
unsigned long ernum, ersize;
ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave;
mtd->eraseregions[i].numblocks);
}
- /* Also select the correct geometry setup too */
+ /* Also select the correct geometry setup too */
mtd->erase = cfi_staa_erase_varsize;
mtd->read = cfi_staa_read;
mtd->write = cfi_staa_write_buffers;
mtd->unlock = cfi_staa_unlock;
mtd->suspend = cfi_staa_suspend;
mtd->resume = cfi_staa_resume;
- mtd->flags = MTD_CAP_NORFLASH;
- mtd->flags |= MTD_ECC; /* FIXME: Not all STMicro flashes have this */
- mtd->eccsize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
+ mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE;
+ mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */
map->fldrv = &cfi_staa_chipdrv;
__module_get(THIS_MODULE);
mtd->name = map->name;
static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf)
{
- __u32 status, status_OK;
+ map_word status, status_OK;
unsigned long timeo;
DECLARE_WAITQUEUE(wait, current);
int suspended = 0;
adr += chip->start;
- /* Ensure cmd read/writes are aligned. */
- cmd_addr = adr & ~(CFIDEV_BUSWIDTH-1);
+ /* Ensure cmd read/writes are aligned. */
+ cmd_addr = adr & ~(map_bankwidth(map)-1);
/* Let's determine this according to the interleave only once */
status_OK = CMD(0x80);
*/
switch (chip->state) {
case FL_ERASING:
- if (!((struct cfi_pri_intelext *)cfi->cmdset_priv)->FeatureSupport & 2)
+ if (!(((struct cfi_pri_intelext *)cfi->cmdset_priv)->FeatureSupport & 2))
goto sleep; /* We don't support erase suspend */
-
- cfi_write (map, CMD(0xb0), cmd_addr);
+
+ map_write (map, CMD(0xb0), cmd_addr);
/* If the flash has finished erasing, then 'erase suspend'
* appears to make some (28F320) flash devices switch to
* 'read' mode. Make sure that we switch to 'read status'
* mode so we get the right data. --rmk
*/
- cfi_write(map, CMD(0x70), cmd_addr);
+ map_write(map, CMD(0x70), cmd_addr);
chip->oldstate = FL_ERASING;
chip->state = FL_ERASE_SUSPENDING;
// printk("Erase suspending at 0x%lx\n", cmd_addr);
for (;;) {
- status = cfi_read(map, cmd_addr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, cmd_addr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
-
+
if (time_after(jiffies, timeo)) {
/* Urgh */
- cfi_write(map, CMD(0xd0), cmd_addr);
+ map_write(map, CMD(0xd0), cmd_addr);
/* make sure we're in 'read status' mode */
- cfi_write(map, CMD(0x70), cmd_addr);
+ map_write(map, CMD(0x70), cmd_addr);
chip->state = FL_ERASING;
spin_unlock_bh(chip->mutex);
printk(KERN_ERR "Chip not ready after erase "
- "suspended: status = 0x%x\n", status);
+ "suspended: status = 0x%lx\n", status.x[0]);
return -EIO;
}
-
+
spin_unlock_bh(chip->mutex);
cfi_udelay(1);
spin_lock_bh(chip->mutex);
}
-
+
suspended = 1;
- cfi_write(map, CMD(0xff), cmd_addr);
+ map_write(map, CMD(0xff), cmd_addr);
chip->state = FL_READY;
break;
-
+
#if 0
case FL_WRITING:
/* Not quite yet */
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
- cfi_write(map, CMD(0x70), cmd_addr);
+ map_write(map, CMD(0x70), cmd_addr);
chip->state = FL_STATUS;
case FL_STATUS:
- status = cfi_read(map, cmd_addr);
- if ((status & status_OK) == status_OK) {
- cfi_write(map, CMD(0xff), cmd_addr);
+ status = map_read(map, cmd_addr);
+ if (map_word_andequal(map, status, status_OK, status_OK)) {
+ map_write(map, CMD(0xff), cmd_addr);
chip->state = FL_READY;
break;
}
-
+
/* Urgh. Chip not yet ready to talk to us. */
if (time_after(jiffies, timeo)) {
spin_unlock_bh(chip->mutex);
- printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %x\n", status);
+ printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %lx\n", status.x[0]);
return -EIO;
}
if (suspended) {
chip->state = chip->oldstate;
- /* What if one interleaved chip has finished and the
+ /* What if one interleaved chip has finished and the
other hasn't? The old code would leave the finished
- one in READY mode. That's bad, and caused -EROFS
+ one in READY mode. That's bad, and caused -EROFS
errors to be returned from do_erase_oneblock because
that's the only bit it checked for at the time.
- As the state machine appears to explicitly allow
+ As the state machine appears to explicitly allow
sending the 0x70 (Read Status) command to an erasing
- chip and expecting it to be ignored, that's what we
+ chip and expecting it to be ignored, that's what we
do. */
- cfi_write(map, CMD(0xd0), cmd_addr);
- cfi_write(map, CMD(0x70), cmd_addr);
+ map_write(map, CMD(0xd0), cmd_addr);
+ map_write(map, CMD(0x70), cmd_addr);
}
wake_up(&chip->wq);
*retlen += thislen;
len -= thislen;
buf += thislen;
-
+
ofs = 0;
chipnum++;
}
return ret;
}
-static inline int do_write_buffer(struct map_info *map, struct flchip *chip,
+static inline int do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf, int len)
{
struct cfi_private *cfi = map->fldrv_priv;
- __u32 status, status_OK;
+ map_word status, status_OK;
unsigned long cmd_adr, timeo;
DECLARE_WAITQUEUE(wait, current);
int wbufsize, z;
-
+
/* M58LW064A requires bus alignment for buffer wriets -- saw */
- if (adr & (CFIDEV_BUSWIDTH-1))
+ if (adr & (map_bankwidth(map)-1))
return -EINVAL;
- wbufsize = CFIDEV_INTERLEAVE << cfi->cfiq->MaxBufWriteSize;
+ wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
adr += chip->start;
cmd_adr = adr & ~(wbufsize-1);
-
+
/* Let's determine this according to the interleave only once */
status_OK = CMD(0x80);
-
+
timeo = jiffies + HZ;
retry:
printk("%s: chip->state[%d]\n", __FUNCTION__, chip->state);
#endif
spin_lock_bh(chip->mutex);
-
+
/* Check that the chip's ready to talk to us.
* Later, we can actually think about interrupting it
* if it's in FL_ERASING state.
switch (chip->state) {
case FL_READY:
break;
-
+
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
- cfi_write(map, CMD(0x70), cmd_adr);
+ map_write(map, CMD(0x70), cmd_adr);
chip->state = FL_STATUS;
#ifdef DEBUG_CFI_FEATURES
- printk("%s: 1 status[%x]\n", __FUNCTION__, cfi_read(map, cmd_adr));
+ printk("%s: 1 status[%x]\n", __FUNCTION__, map_read(map, cmd_adr));
#endif
case FL_STATUS:
- status = cfi_read(map, cmd_adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, cmd_adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
/* Urgh. Chip not yet ready to talk to us. */
if (time_after(jiffies, timeo)) {
spin_unlock_bh(chip->mutex);
- printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %x, status = %llx\n",
- status, cfi_read(map, cmd_adr));
+ printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx\n",
+ status.x[0], map_read(map, cmd_adr).x[0]);
return -EIO;
}
}
ENABLE_VPP(map);
- cfi_write(map, CMD(0xe8), cmd_adr);
+ map_write(map, CMD(0xe8), cmd_adr);
chip->state = FL_WRITING_TO_BUFFER;
z = 0;
for (;;) {
- status = cfi_read(map, cmd_adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, cmd_adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
spin_unlock_bh(chip->mutex);
if (++z > 100) {
/* Argh. Not ready for write to buffer */
DISABLE_VPP(map);
- cfi_write(map, CMD(0x70), cmd_adr);
+ map_write(map, CMD(0x70), cmd_adr);
chip->state = FL_STATUS;
spin_unlock_bh(chip->mutex);
- printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %x\n", status);
+ printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %lx\n", status.x[0]);
return -EIO;
}
}
/* Write length of data to come */
- cfi_write(map, CMD(len/CFIDEV_BUSWIDTH-1), cmd_adr );
-
+ map_write(map, CMD(len/map_bankwidth(map)-1), cmd_adr );
+
/* Write data */
- for (z = 0; z < len; z += CFIDEV_BUSWIDTH) {
- if (cfi_buswidth_is_1()) {
- u8 *b = (u8 *)buf;
-
- map_write8 (map, *b++, adr+z);
- buf = (const u_char *)b;
- } else if (cfi_buswidth_is_2()) {
- u16 *b = (u16 *)buf;
-
- map_write16 (map, *b++, adr+z);
- buf = (const u_char *)b;
- } else if (cfi_buswidth_is_4()) {
- u32 *b = (u32 *)buf;
-
- map_write32 (map, *b++, adr+z);
- buf = (const u_char *)b;
- } else {
- DISABLE_VPP(map);
- return -EINVAL;
- }
+ for (z = 0; z < len;
+ z += map_bankwidth(map), buf += map_bankwidth(map)) {
+ map_word d;
+ d = map_word_load(map, buf);
+ map_write(map, d, adr+z);
}
/* GO GO GO */
- cfi_write(map, CMD(0xd0), cmd_adr);
+ map_write(map, CMD(0xd0), cmd_adr);
chip->state = FL_WRITING;
spin_unlock_bh(chip->mutex);
continue;
}
- status = cfi_read(map, cmd_adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, cmd_adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
/* OK Still waiting */
if (time_after(jiffies, timeo)) {
/* clear status */
- cfi_write(map, CMD(0x50), cmd_adr);
+ map_write(map, CMD(0x50), cmd_adr);
/* put back into read status register mode */
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
DISABLE_VPP(map);
spin_unlock_bh(chip->mutex);
printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n");
return -EIO;
}
-
+
/* Latency issues. Drop the lock, wait a while and retry */
spin_unlock_bh(chip->mutex);
cfi_udelay(1);
if (!chip->buffer_write_time)
chip->buffer_write_time++;
}
- if (z > 1)
+ if (z > 1)
chip->buffer_write_time++;
-
+
/* Done and happy. */
DISABLE_VPP(map);
chip->state = FL_STATUS;
/* check for errors: 'lock bit', 'VPP', 'dead cell'/'unerased cell' or 'incorrect cmd' -- saw */
- if ((status & CMD(0x02)) || (status & CMD(0x08)) ||
- (status & CMD(0x10)) || (status & CMD(0x20))) {
+ if (map_word_bitsset(map, status, CMD(0x3a))) {
#ifdef DEBUG_CFI_FEATURES
- printk("%s: 2 status[%x]\n", __FUNCTION__, status);
+ printk("%s: 2 status[%lx]\n", __FUNCTION__, status.x[0]);
#endif
- /* clear status */
- cfi_write(map, CMD(0x50), cmd_adr);
- /* put back into read status register mode */
- cfi_write(map, CMD(0x70), adr);
- wake_up(&chip->wq);
- spin_unlock_bh(chip->mutex);
- return (status & CMD(0x02)) ? -EROFS : -EIO;
- }
+ /* clear status */
+ map_write(map, CMD(0x50), cmd_adr);
+ /* put back into read status register mode */
+ map_write(map, CMD(0x70), adr);
+ wake_up(&chip->wq);
+ spin_unlock_bh(chip->mutex);
+ return map_word_bitsset(map, status, CMD(0x02)) ? -EROFS : -EIO;
+ }
wake_up(&chip->wq);
spin_unlock_bh(chip->mutex);
return 0;
}
-static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to,
+static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to,
size_t len, size_t *retlen, const u_char *buf)
{
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
- int wbufsize = CFIDEV_INTERLEAVE << cfi->cfiq->MaxBufWriteSize;
+ int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize;
int ret = 0;
int chipnum;
unsigned long ofs;
ofs = to - (chipnum << cfi->chipshift);
#ifdef DEBUG_CFI_FEATURES
- printk("%s: CFIDEV_BUSWIDTH[%x]\n", __FUNCTION__, CFIDEV_BUSWIDTH);
+ printk("%s: map_bankwidth(map)[%x]\n", __FUNCTION__, map_bankwidth(map));
printk("%s: chipnum[%x] wbufsize[%x]\n", __FUNCTION__, chipnum, wbufsize);
printk("%s: ofs[%x] len[%x]\n", __FUNCTION__, ofs, len);
#endif
-
+
/* Write buffer is worth it only if more than one word to write... */
while (len > 0) {
/* We must not cross write block boundaries */
if (size > len)
size = len;
- ret = do_write_buffer(map, &cfi->chips[chipnum],
+ ret = do_write_buffer(map, &cfi->chips[chipnum],
ofs, buf, size);
if (ret)
return ret;
len -= size;
if (ofs >> cfi->chipshift) {
- chipnum ++;
+ chipnum ++;
ofs = 0;
if (chipnum == cfi->numchips)
return 0;
}
}
-
+
return 0;
}
write_error:
if (retlen)
*retlen = totlen;
+ kfree(buffer);
return ret;
}
static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
{
struct cfi_private *cfi = map->fldrv_priv;
- __u32 status, status_OK;
+ map_word status, status_OK;
unsigned long timeo;
int retries = 3;
DECLARE_WAITQUEUE(wait, current);
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
case FL_READY:
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
case FL_STATUS:
- status = cfi_read(map, adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
-
+
/* Urgh. Chip not yet ready to talk to us. */
if (time_after(jiffies, timeo)) {
spin_unlock_bh(chip->mutex);
ENABLE_VPP(map);
/* Clear the status register first */
- cfi_write(map, CMD(0x50), adr);
+ map_write(map, CMD(0x50), adr);
/* Now erase */
- cfi_write(map, CMD(0x20), adr);
- cfi_write(map, CMD(0xD0), adr);
+ map_write(map, CMD(0x20), adr);
+ map_write(map, CMD(0xD0), adr);
chip->state = FL_ERASING;
-
+
spin_unlock_bh(chip->mutex);
- schedule_timeout(HZ);
+ msleep(1000);
spin_lock_bh(chip->mutex);
/* FIXME. Use a timer to check this, and return immediately. */
continue;
}
- status = cfi_read(map, adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
-
+
/* OK Still waiting */
if (time_after(jiffies, timeo)) {
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
- printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %x, status = %llx.\n", status, cfi_read(map, adr));
+ printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
DISABLE_VPP(map);
spin_unlock_bh(chip->mutex);
return -EIO;
}
-
+
/* Latency issues. Drop the lock, wait a while and retry */
spin_unlock_bh(chip->mutex);
cfi_udelay(1);
spin_lock_bh(chip->mutex);
}
-
+
DISABLE_VPP(map);
ret = 0;
/* We've broken this before. It doesn't hurt to be safe */
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
- status = cfi_read(map, adr);
+ status = map_read(map, adr);
/* check for lock bit */
- if (status & CMD(0x3a)) {
- unsigned char chipstatus = status;
- if (status != CMD(status & 0xff)) {
- int i;
- for (i = 1; i<CFIDEV_INTERLEAVE; i++) {
- chipstatus |= status >> (cfi->device_type * 8);
+ if (map_word_bitsset(map, status, CMD(0x3a))) {
+ unsigned char chipstatus = status.x[0];
+ if (!map_word_equal(map, status, CMD(chipstatus))) {
+ int i, w;
+ for (w=0; w<map_words(map); w++) {
+ for (i = 0; i<cfi_interleave(cfi); i++) {
+ chipstatus |= status.x[w] >> (cfi->device_type * 8);
+ }
}
- printk(KERN_WARNING "Status is not identical for all chips: 0x%x. Merging to give 0x%02x\n", status, chipstatus);
+ printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n",
+ status.x[0], chipstatus);
}
/* Reset the error bits */
- cfi_write(map, CMD(0x50), adr);
- cfi_write(map, CMD(0x70), adr);
-
+ map_write(map, CMD(0x50), adr);
+ map_write(map, CMD(0x70), adr);
+
if ((chipstatus & 0x30) == 0x30) {
- printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", status);
+ printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);
ret = -EIO;
} else if (chipstatus & 0x02) {
/* Protection bit set */
ret = -EROFS;
} else if (chipstatus & 0x8) {
/* Voltage */
- printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", status);
+ printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus);
ret = -EIO;
} else if (chipstatus & 0x20) {
if (retries--) {
- printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, status);
+ printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus);
timeo = jiffies + HZ;
chip->state = FL_STATUS;
spin_unlock_bh(chip->mutex);
goto retry;
}
- printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, status);
+ printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus);
ret = -EIO;
}
}
i = 0;
- /* Skip all erase regions which are ended before the start of
+ /* Skip all erase regions which are ended before the start of
the requested erase. Actually, to save on the calculations,
we skip to the first erase region which starts after the
start of the requested erase, and then go back one.
*/
-
+
while (i < mtd->numeraseregions && instr->addr >= regions[i].offset)
i++;
i--;
- /* OK, now i is pointing at the erase region in which this
+ /* OK, now i is pointing at the erase region in which this
erase request starts. Check the start of the requested
erase range is aligned with the erase size which is in
effect here.
the address actually falls
*/
i--;
-
+
if ((instr->addr + instr->len) & (regions[i].erasesize-1))
return -EINVAL;
while(len) {
ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr);
-
+
if (ret)
return ret;
if (adr >> cfi->chipshift) {
adr = 0;
chipnum++;
-
+
if (chipnum >= cfi->numchips)
break;
}
}
-
+
instr->state = MTD_ERASE_DONE;
- if (instr->callback)
- instr->callback(instr);
-
+ mtd_erase_callback(instr);
+
return 0;
}
case FL_JEDEC_QUERY:
chip->oldstate = chip->state;
chip->state = FL_SYNCING;
- /* No need to wake_up() on this state change -
+ /* No need to wake_up() on this state change -
* as the whole point is that nobody can do anything
* with the chip now anyway.
*/
default:
/* Not an idle state */
add_wait_queue(&chip->wq, &wait);
-
+
spin_unlock_bh(chip->mutex);
schedule();
remove_wait_queue(&chip->wq, &wait);
-
+
goto retry;
}
}
chip = &cfi->chips[i];
spin_lock_bh(chip->mutex);
-
+
if (chip->state == FL_SYNCING) {
chip->state = chip->oldstate;
wake_up(&chip->wq);
static inline int do_lock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
{
struct cfi_private *cfi = map->fldrv_priv;
- __u32 status, status_OK;
+ map_word status, status_OK;
unsigned long timeo = jiffies + HZ;
DECLARE_WAITQUEUE(wait, current);
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
case FL_READY:
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
case FL_STATUS:
- status = cfi_read(map, adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
-
+
/* Urgh. Chip not yet ready to talk to us. */
if (time_after(jiffies, timeo)) {
spin_unlock_bh(chip->mutex);
}
ENABLE_VPP(map);
- cfi_write(map, CMD(0x60), adr);
- cfi_write(map, CMD(0x01), adr);
+ map_write(map, CMD(0x60), adr);
+ map_write(map, CMD(0x01), adr);
chip->state = FL_LOCKING;
-
+
spin_unlock_bh(chip->mutex);
- schedule_timeout(HZ);
+ msleep(1000);
spin_lock_bh(chip->mutex);
/* FIXME. Use a timer to check this, and return immediately. */
timeo = jiffies + (HZ*2);
for (;;) {
- status = cfi_read(map, adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
-
+
/* OK Still waiting */
if (time_after(jiffies, timeo)) {
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
- printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %x, status = %llx.\n", status, cfi_read(map, adr));
+ printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
DISABLE_VPP(map);
spin_unlock_bh(chip->mutex);
return -EIO;
}
-
+
/* Latency issues. Drop the lock, wait a while and retry */
spin_unlock_bh(chip->mutex);
cfi_udelay(1);
spin_lock_bh(chip->mutex);
}
-
+
/* Done and happy. */
chip->state = FL_STATUS;
DISABLE_VPP(map);
cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
printk("after lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
-#endif
-
+#endif
+
if (ret)
return ret;
if (adr >> cfi->chipshift) {
adr = 0;
chipnum++;
-
+
if (chipnum >= cfi->numchips)
break;
}
static inline int do_unlock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr)
{
struct cfi_private *cfi = map->fldrv_priv;
- __u32 status, status_OK;
+ map_word status, status_OK;
unsigned long timeo = jiffies + HZ;
DECLARE_WAITQUEUE(wait, current);
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
case FL_READY:
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
case FL_STATUS:
- status = cfi_read(map, adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
-
+
/* Urgh. Chip not yet ready to talk to us. */
if (time_after(jiffies, timeo)) {
spin_unlock_bh(chip->mutex);
}
ENABLE_VPP(map);
- cfi_write(map, CMD(0x60), adr);
- cfi_write(map, CMD(0xD0), adr);
+ map_write(map, CMD(0x60), adr);
+ map_write(map, CMD(0xD0), adr);
chip->state = FL_UNLOCKING;
-
+
spin_unlock_bh(chip->mutex);
- schedule_timeout(HZ);
+ msleep(1000);
spin_lock_bh(chip->mutex);
/* FIXME. Use a timer to check this, and return immediately. */
timeo = jiffies + (HZ*2);
for (;;) {
- status = cfi_read(map, adr);
- if ((status & status_OK) == status_OK)
+ status = map_read(map, adr);
+ if (map_word_andequal(map, status, status_OK, status_OK))
break;
-
+
/* OK Still waiting */
if (time_after(jiffies, timeo)) {
- cfi_write(map, CMD(0x70), adr);
+ map_write(map, CMD(0x70), adr);
chip->state = FL_STATUS;
- printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %x, status = %llx.\n", status, cfi_read(map, adr));
+ printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
DISABLE_VPP(map);
spin_unlock_bh(chip->mutex);
return -EIO;
}
-
+
/* Latency issues. Drop the unlock, wait a while and retry */
spin_unlock_bh(chip->mutex);
cfi_udelay(1);
spin_lock_bh(chip->mutex);
}
-
+
/* Done and happy. */
chip->state = FL_STATUS;
DISABLE_VPP(map);
{
unsigned long temp_adr = adr;
unsigned long temp_len = len;
-
+
cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL);
while (temp_len) {
printk("before unlock %x: block status register is %x\n",temp_adr,cfi_read_query(map, temp_adr+(2*ofs_factor)));
printk("after unlock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL);
#endif
-
+
return ret;
}
case FL_JEDEC_QUERY:
chip->oldstate = chip->state;
chip->state = FL_PM_SUSPENDED;
- /* No need to wake_up() on this state change -
+ /* No need to wake_up() on this state change -
* as the whole point is that nobody can do anything
* with the chip now anyway.
*/
if (ret) {
for (i--; i >=0; i--) {
chip = &cfi->chips[i];
-
+
spin_lock_bh(chip->mutex);
-
+
if (chip->state == FL_PM_SUSPENDED) {
/* No need to force it into a known state here,
because we're returning failure, and it didn't
}
spin_unlock_bh(chip->mutex);
}
- }
-
+ }
+
return ret;
}
struct flchip *chip;
for (i=0; i<cfi->numchips; i++) {
-
+
chip = &cfi->chips[i];
spin_lock_bh(chip->mutex);
-
+
/* Go to known state. Chip may have been power cycled */
if (chip->state == FL_PM_SUSPENDED) {
- cfi_write(map, CMD(0xFF), 0);
+ map_write(map, CMD(0xFF), 0);
chip->state = FL_READY;
wake_up(&chip->wq);
}
kfree(cfi);
}
-#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE)
-#define cfi_staa_init init_module
-#define cfi_staa_exit cleanup_module
-#endif
-
-static char im_name[]="cfi_cmdset_0020";
-
-int __init cfi_staa_init(void)
-{
- inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0020);
- return 0;
-}
-
-static void __exit cfi_staa_exit(void)
-{
- inter_module_unregister(im_name);
-}
-
-module_init(cfi_staa_init);
-module_exit(cfi_staa_exit);
-
MODULE_LICENSE("GPL");