This commit was manufactured by cvs2svn to create tag
[linux-2.6.git] / drivers / mtd / devices / ms02-nv.h
index 8a6eef7..fb1ec10 100644 (file)
@@ -1,96 +1,34 @@
 /*
- *     Copyright (c) 2001, 2003  Maciej W. Rozycki
+ *      Copyright (c) 2001 Maciej W. Rozycki
  *
- *     DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for
- *     DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260
- *     systems.
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
  *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     as published by the Free Software Foundation; either version
- *     2 of the License, or (at your option) any later version.
- *
- *     $Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
+ *     $Id: ms02-nv.h,v 1.1 2002/09/13 13:46:55 dwmw2 Exp $
  */
 
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 
-/*
- * Addresses are decoded as follows:
- *
- * 0x000000 - 0x3fffff SRAM
- * 0x400000 - 0x7fffff CSR
- *
- * Within the SRAM area the following ranges are forced by the system
- * firmware:
- *
- * 0x000000 - 0x0003ff diagnostic area, destroyed upon a reboot
- * 0x000400 - ENDofRAM storage area, available to operating systems
- *
- * but we can't really use the available area right from 0x000400 as
- * the first word is used by the firmware as a status flag passed
- * from an operating system.  If anything but the valid data magic
- * ID value is found, the firmware considers the SRAM clean, i.e.
- * containing no valid data, and disables the battery resulting in
- * data being erased as soon as power is switched off.  So the choice
- * for the start address of the user-available is 0x001000 which is
- * nicely page aligned.  The area between 0x000404 and 0x000fff may
- * be used by the driver for own needs.
- *
- * The diagnostic area defines two status words to be read by an
- * operating system, a magic ID to distinguish a MS02-NV board from
- * anything else and a status information providing results of tests
- * as well as the size of SRAM available, which can be 1MiB or 2MiB
- * (that's what the firmware handles; no idea if 2MiB modules ever
- * existed).
- *
- * The firmware only handles the MS02-NV board if installed in the
- * last (15th) slot, so for any other location the status information
- * stored in the SRAM cannot be relied upon.  But from the hardware
- * point of view there is no problem using up to 14 such boards in a
- * system -- only the 1st slot needs to be filled with a DRAM module.
- * The MS02-NV board is ECC-protected, like other MS02 memory boards.
- *
- * The state of the battery as provided by the CSR is reflected on
- * the two onboard LEDs.  When facing the battery side of the board,
- * with the LEDs at the top left and the battery at the bottom right
- * (i.e. looking from the back side of the system box), their meaning
- * is as follows (the system has to be powered on):
- *
- * left LED            battery disable status: lit = enabled
- * right LED           battery condition status: lit = OK
- */
-
 /* MS02-NV iomem register offsets. */
 #define MS02NV_CSR             0x400000        /* control & status register */
 
-/* MS02-NV CSR status bits. */
-#define MS02NV_CSR_BATT_OK     0x01            /* battery OK */
-#define MS02NV_CSR_BATT_OFF    0x02            /* battery disabled */
-
-
 /* MS02-NV memory offsets. */
 #define MS02NV_DIAG            0x0003f8        /* diagnostic status */
 #define MS02NV_MAGIC           0x0003fc        /* MS02-NV magic ID */
-#define MS02NV_VALID           0x000400        /* valid data magic ID */
-#define MS02NV_RAM             0x001000        /* user-exposed RAM start */
+#define MS02NV_RAM             0x000400        /* general-purpose RAM start */
 
-/* MS02-NV diagnostic status bits. */
-#define MS02NV_DIAG_TEST       0x01            /* SRAM test done (?) */
-#define MS02NV_DIAG_RO         0x02            /* SRAM r/o test done */
-#define MS02NV_DIAG_RW         0x04            /* SRAM r/w test done */
-#define MS02NV_DIAG_FAIL       0x08            /* SRAM test failed */
-#define MS02NV_DIAG_SIZE_MASK  0xf0            /* SRAM size mask */
-#define MS02NV_DIAG_SIZE_SHIFT 0x10            /* SRAM size shift (left) */
+/* MS02-NV diagnostic status constants. */
+#define MS02NV_DIAG_SIZE_MASK  0xf0            /* RAM size mask */
+#define MS02NV_DIAG_SIZE_SHIFT 0x10            /* RAM size shift (left) */
 
 /* MS02-NV general constants. */
 #define MS02NV_ID              0x03021966      /* MS02-NV magic ID value */
-#define MS02NV_VALID_ID                0xbd100248      /* valid data magic ID value */
 #define MS02NV_SLOT_SIZE       0x800000        /* size of the address space
                                                   decoded by the module */
 
-
 typedef volatile u32 ms02nv_uint;
 
 struct ms02nv_private {