fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / mtd / maps / l440gx.c

diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index b086682..67620ad 100644 (file)
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,5 +1,5 @@
 /*
- * $Id: l440gx.c,v 1.17 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
  *
  * BIOS Flash chip on Intel 440GX board.
  *
@@ -13,7 +13,6 @@
 #include <asm/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <linux/config.h>
 
 #define PIIXE_IOBASE_RESOURCE  11
 
@@ -49,7 +48,7 @@ static struct map_info l440gx_map = {
        .bankwidth = BUSWIDTH,
        .phys = WINDOW_ADDR,
 #if 0
-       /* FIXME verify that this is the 
+       /* FIXME verify that this is the
         * appripriate code for vpp enable/disable
         */
        .set_vpp = l440gx_set_vpp
@@ -62,14 +61,17 @@ static int __init init_l440gx(void)
        struct resource *pm_iobase;
        __u16 word;
 
-       dev = pci_find_device(PCI_VENDOR_ID_INTEL, 
+       dev = pci_get_device(PCI_VENDOR_ID_INTEL,
                PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
 
-       pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL, 
+       pm_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
                PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
 
+       pci_dev_put(dev);
+
        if (!dev || !pm_dev) {
                printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n");
+               pci_dev_put(pm_dev);
                return -ENODEV;
        }
 
@@ -77,15 +79,16 @@ static int __init init_l440gx(void)
 
        if (!l440gx_map.virt) {
                printk(KERN_WARNING "Failed to ioremap L440GX flash region\n");
+               pci_dev_put(pm_dev);
                return -ENOMEM;
        }
        simple_map_init(&l440gx_map);
        printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt);
 
-       /* Setup the pm iobase resource 
+       /* Setup the pm iobase resource
         * This code should move into some kind of generic bridge
         * driver but for the moment I'm content with getting the
-        * allocation correct. 
+        * allocation correct.
         */
        pm_iobase = &pm_dev->resource[PIIXE_IOBASE_RESOURCE];
        if (!(pm_iobase->flags & IORESOURCE_IO)) {
@@ -100,8 +103,12 @@ static int __init init_l440gx(void)
                pm_iobase->start += iobase & ~1;
                pm_iobase->end += iobase & ~1;
 
+               pci_dev_put(pm_dev);
+
                /* Allocate the resource region */
                if (pci_assign_resource(pm_dev, PIIXE_IOBASE_RESOURCE) != 0) {
+                       pci_dev_put(dev);
+                       pci_dev_put(pm_dev);
                        printk(KERN_WARNING "Could not allocate pm iobase resource\n");
                        iounmap(l440gx_map.virt);
                        return -ENXIO;
@@ -110,7 +117,7 @@ static int __init init_l440gx(void)
        /* Set the iobase */
        iobase = pm_iobase->start;
        pci_write_config_dword(pm_dev, 0x40, iobase | 1);
-       
+
 
        /* Set XBCS# */
        pci_read_config_word(dev, 0x4e, &word);
@@ -122,7 +129,7 @@ static int __init init_l440gx(void)
 
        /* Enable the gate on the WE line */
        outb(inb(TRIBUF_PORT) & ~1, TRIBUF_PORT);
-       
+
                printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
 
        mymtd = do_map_probe("jedec_probe", &l440gx_map);
@@ -145,7 +152,7 @@ static void __exit cleanup_l440gx(void)
 {
        del_mtd_device(mymtd);
        map_destroy(mymtd);
-       
+
        iounmap(l440gx_map.virt);
 }