This commit was manufactured by cvs2svn to create tag
[linux-2.6.git] / drivers / mtd / nand / Kconfig
index 89ab7da..ed08529 100644 (file)
@@ -1,5 +1,5 @@
 # drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.22 2004/10/05 22:11:46 gleixner Exp $
+# $Id: Kconfig,v 1.17 2004/08/10 14:24:07 dwmw2 Exp $
 
 menu "NAND Flash Device Drivers"
        depends on MTD!=n
@@ -36,12 +36,6 @@ config MTD_NAND_EDB7312
          This enables the driver for the Cirrus Logic EBD7312 evaluation 
          board to access the onboard NAND Flash.
 
-config MTD_NAND_H1900
-       tristate "iPAQ H1900 flash"
-       depends on ARM && MTD_NAND && ARCH_PXA && MTD_PARTITIONS
-       help
-         This enables the driver for the iPAQ h1900 flash.
-
 config MTD_NAND_SPIA
        tristate "NAND Flash device on SPIA board"
        depends on ARM && ARCH_P720T && MTD_NAND
@@ -80,54 +74,15 @@ config MTD_NAND_AU1550
          This enables the driver for the NAND flash controller on the
          AMD/Alchemy 1550 SOC.
 
-config MTD_NAND_RTC_FROM4
-       tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
-       depends on MTD_NAND && SH_SOLUTION_ENGINE
-       select REED_SOLOMON
-       select REED_SOLOMON_DEC8
-       help
-         This enables the driver for the Renesas Technology AG-AND 
-         flash interface board (FROM_BOARD4)
-
 config MTD_NAND_PPCHAMELEONEVB
        tristate "NAND Flash device on PPChameleonEVB board"
        depends on PPCHAMELEONEVB && MTD_NAND
        help
-         This enables the NAND flash driver on the PPChameleon EVB Board.
-
-config MTD_NAND_S3C2410
-       tristate "NAND Flash support for S3C2410 SoC"
-       depends on ARCH_S3C2410 && MTD_NAND
-       help
-         This enables the NAND flash controller on the S3C2410.
-
-         No board specfic support is done by this driver, each board
-         must advertise a platform_device for the driver to attach. 
-
-config MTD_NAND_S3C2410_DEBUG
-       bool "S3C2410 NAND driver debug"
-       depends on MTD_NAND_S3C2410
-       help
-         Enable debugging of the S3C2410 NAND driver
-
-config MTD_NAND_S3C2410_HWECC
-       bool "S3C2410 NAND Hardware ECC"
-       depends on MTD_NAND_S3C2410
-       help
-         Enable the use of the S3C2410's internal ECC generator when
-         using NAND. Early versions of the chip have had problems with
-         incorrect ECC generation, and if using these, the default of
-         software ECC is preferable.
-
-         If you lay down a device with the hardware ECC, then you will
-         currently not be able to switch to software, as there is no
-         implementation for ECC method used by the S3C2410
+         This enables the NAND flash driver on the PPChameleon EVB Board.      
 
 config MTD_NAND_DISKONCHIP
        tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
        depends on MTD_NAND && EXPERIMENTAL
-       select REED_SOLOMON
-       select REED_SOLOMON_DEC16
        help
          This is a reimplementation of M-Systems DiskOnChip 2000,
          Millennium and Millennium Plus as a standard NAND device driver,