#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
*/
static struct mtd_info *au1550_mtd = NULL;
static void __iomem *p_nand;
-static int nand_width = 1; /* default x8 */
-static void (*au1550_write_byte)(struct mtd_info *, u_char);
+static int nand_width = 1; /* default x8*/
/*
* Define partitions for flash device
*/
static const struct mtd_partition partition_info[] = {
{
- .name = "NAND FS 0",
- .offset = 0,
- .size = 8 * 1024 * 1024},
+ .name = "NAND FS 0",
+ .offset = 0,
+ .size = 8*1024*1024
+ },
{
- .name = "NAND FS 1",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL}
+ .name = "NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ }
};
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
/**
* au_read_byte - read one byte from the chip
return ret;
}
+/**
+ * au_write_word - write one word to the chip
+ * @mtd: MTD device structure
+ * @word: data word to write
+ *
+ * write function for 16bit buswith without
+ * endianess conversion
+ */
+static void au_write_word(struct mtd_info *mtd, u16 word)
+{
+ struct nand_chip *this = mtd->priv;
+ writew(word, this->IO_ADDR_W);
+ au_sync();
+}
+
/**
* au_write_buf - write buffer to chip
* @mtd: MTD device structure
int i;
struct nand_chip *this = mtd->priv;
- for (i = 0; i < len; i++) {
+ for (i=0; i<len; i++) {
writeb(buf[i], this->IO_ADDR_W);
au_sync();
}
int i;
struct nand_chip *this = mtd->priv;
- for (i = 0; i < len; i++) {
+ for (i=0; i<len; i++) {
buf[i] = readb(this->IO_ADDR_R);
au_sync();
}
int i;
struct nand_chip *this = mtd->priv;
- for (i = 0; i < len; i++) {
+ for (i=0; i<len; i++) {
if (buf[i] != readb(this->IO_ADDR_R))
return -EFAULT;
au_sync();
u16 *p = (u16 *) buf;
len >>= 1;
- for (i = 0; i < len; i++) {
+ for (i=0; i<len; i++) {
writew(p[i], this->IO_ADDR_W);
au_sync();
}
u16 *p = (u16 *) buf;
len >>= 1;
- for (i = 0; i < len; i++) {
+ for (i=0; i<len; i++) {
p[i] = readw(this->IO_ADDR_R);
au_sync();
}
u16 *p = (u16 *) buf;
len >>= 1;
- for (i = 0; i < len; i++) {
+ for (i=0; i<len; i++) {
if (p[i] != readw(this->IO_ADDR_R))
return -EFAULT;
au_sync();
return 0;
}
-/* Select the chip by setting nCE to low */
-#define NAND_CTL_SETNCE 1
-/* Deselect the chip by setting nCE to high */
-#define NAND_CTL_CLRNCE 2
-/* Select the command latch by setting CLE to high */
-#define NAND_CTL_SETCLE 3
-/* Deselect the command latch by setting CLE to low */
-#define NAND_CTL_CLRCLE 4
-/* Select the address latch by setting ALE to high */
-#define NAND_CTL_SETALE 5
-/* Deselect the address latch by setting ALE to low */
-#define NAND_CTL_CLRALE 6
static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
{
register struct nand_chip *this = mtd->priv;
- switch (cmd) {
+ switch(cmd){
- case NAND_CTL_SETCLE:
- this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
- break;
-
- case NAND_CTL_CLRCLE:
- this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
- break;
-
- case NAND_CTL_SETALE:
- this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
- break;
+ case NAND_CTL_SETCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; break;
+ case NAND_CTL_CLRCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; break;
+ case NAND_CTL_SETALE: this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; break;
case NAND_CTL_CLRALE:
this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
- /* FIXME: Nobody knows why this is necessary,
+ /* FIXME: Nobody knows why this is neccecary,
* but it works only that way */
udelay(1);
break;
case NAND_CTL_SETNCE:
/* assert (force assert) chip enable */
- au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
+ au_writel((1<<(4+NAND_CS)) , MEM_STNDCTL); break;
break;
case NAND_CTL_CLRNCE:
- /* deassert chip enable */
- au_writel(0, MEM_STNDCTL);
+ /* deassert chip enable */
+ au_writel(0, MEM_STNDCTL); break;
break;
}
return ret;
}
-/**
- * au1550_select_chip - control -CE line
- * Forbid driving -CE manually permitting the NAND controller to do this.
- * Keeping -CE asserted during the whole sector reads interferes with the
- * NOR flash and PCMCIA drivers as it causes contention on the static bus.
- * We only have to hold -CE low for the NAND read commands since the flash
- * chip needs it to be asserted during chip not ready time but the NAND
- * controller keeps it released.
- *
- * @mtd: MTD device structure
- * @chip: chipnumber to select, -1 for deselect
- */
-static void au1550_select_chip(struct mtd_info *mtd, int chip)
-{
-}
-
-/**
- * au1550_command - Send command to NAND device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
- */
-static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
-{
- register struct nand_chip *this = mtd->priv;
- int ce_override = 0, i;
- ulong flags;
-
- /* Begin command latch cycle */
- au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
- /*
- * Write out the command to the device.
- */
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->writesize) {
- /* OOB area */
- column -= mtd->writesize;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
- au1550_write_byte(mtd, readcmd);
- }
- au1550_write_byte(mtd, command);
-
- /* Set ALE and clear CLE to start address cycle */
- au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);
-
- if (column != -1 || page_addr != -1) {
- au1550_hwcontrol(mtd, NAND_CTL_SETALE);
-
- /* Serially input address */
- if (column != -1) {
- /* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
- column >>= 1;
- au1550_write_byte(mtd, column);
- }
- if (page_addr != -1) {
- au1550_write_byte(mtd, (u8)(page_addr & 0xff));
-
- if (command == NAND_CMD_READ0 ||
- command == NAND_CMD_READ1 ||
- command == NAND_CMD_READOOB) {
- /*
- * NAND controller will release -CE after
- * the last address byte is written, so we'll
- * have to forcibly assert it. No interrupts
- * are allowed while we do this as we don't
- * want the NOR flash or PCMCIA drivers to
- * steal our precious bytes of data...
- */
- ce_override = 1;
- local_irq_save(flags);
- au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
- }
-
- au1550_write_byte(mtd, (u8)(page_addr >> 8));
-
- /* One more address cycle for devices > 32MiB */
- if (this->chipsize > (32 << 20))
- au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f));
- }
- /* Latch in address */
- au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
- }
-
- /*
- * Program and erase have their own busy handlers.
- * Status and sequential in need no delay.
- */
- switch (command) {
-
- case NAND_CMD_PAGEPROG:
- case NAND_CMD_ERASE1:
- case NAND_CMD_ERASE2:
- case NAND_CMD_SEQIN:
- case NAND_CMD_STATUS:
- return;
-
- case NAND_CMD_RESET:
- break;
-
- case NAND_CMD_READ0:
- case NAND_CMD_READ1:
- case NAND_CMD_READOOB:
- /* Check if we're really driving -CE low (just in case) */
- if (unlikely(!ce_override))
- break;
-
- /* Apply a short delay always to ensure that we do wait tWB. */
- ndelay(100);
- /* Wait for a chip to become ready... */
- for (i = this->chip_delay; !this->dev_ready(mtd) && i > 0; --i)
- udelay(1);
-
- /* Release -CE and re-enable interrupts. */
- au1550_hwcontrol(mtd, NAND_CTL_CLRNCE);
- local_irq_restore(flags);
- return;
- }
- /* Apply this short delay always to ensure that we do wait tWB. */
- ndelay(100);
-
- while(!this->dev_ready(mtd));
-}
-
-
/*
* Main initialization routine
*/
-static int __init au1xxx_nand_init(void)
+int __init au1xxx_nand_init (void)
{
struct nand_chip *this;
- u16 boot_swapboot = 0; /* default value */
+ u16 boot_swapboot = 0; /* default value */
int retval;
u32 mem_staddr;
u32 nand_phys;
/* Allocate memory for MTD device structure and private data */
- au1550_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
+ au1550_mtd = kmalloc (sizeof(struct mtd_info) +
+ sizeof (struct nand_chip), GFP_KERNEL);
if (!au1550_mtd) {
- printk("Unable to allocate NAND MTD dev structure.\n");
+ printk ("Unable to allocate NAND MTD dev structure.\n");
return -ENOMEM;
}
/* Get pointer to private data */
- this = (struct nand_chip *)(&au1550_mtd[1]);
+ this = (struct nand_chip *) (&au1550_mtd[1]);
/* Initialize structures */
- memset(au1550_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
+ memset((char *) au1550_mtd, 0, sizeof(struct mtd_info));
+ memset((char *) this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
au1550_mtd->priv = this;
- au1550_mtd->owner = THIS_MODULE;
- /* MEM_STNDCTL: disable ints, disable nand boot */
- au_writel(0, MEM_STNDCTL);
+ /* disable interrupts */
+ au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
+
+ /* disable NAND boot */
+ au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
#ifdef CONFIG_MIPS_PB1550
/* set gpio206 high */
- au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
+ au_writel(au_readl(GPIO2_DIR) & ~(1<<6), GPIO2_DIR);
- boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
+ boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) |
+ ((bcsr->status >> 6) & 0x1);
switch (boot_swapboot) {
- case 0:
- case 2:
- case 8:
- case 0xC:
- case 0xD:
- /* x16 NAND Flash */
- nand_width = 0;
- break;
- case 1:
- case 9:
- case 3:
- case 0xE:
- case 0xF:
- /* x8 NAND Flash */
- nand_width = 1;
- break;
- default:
- printk("Pb1550 NAND: bad boot:swap\n");
- retval = -EINVAL;
- goto outmem;
+ case 0:
+ case 2:
+ case 8:
+ case 0xC:
+ case 0xD:
+ /* x16 NAND Flash */
+ nand_width = 0;
+ break;
+ case 1:
+ case 9:
+ case 3:
+ case 0xE:
+ case 0xF:
+ /* x8 NAND Flash */
+ nand_width = 1;
+ break;
+ default:
+ printk("Pb1550 NAND: bad boot:swap\n");
+ retval = -EINVAL;
+ goto outmem;
}
#endif
/* make controller and MTD agree */
if (NAND_CS == 0)
- nand_width = au_readl(MEM_STCFG0) & (1 << 22);
+ nand_width = au_readl(MEM_STCFG0) & (1<<22);
if (NAND_CS == 1)
- nand_width = au_readl(MEM_STCFG1) & (1 << 22);
+ nand_width = au_readl(MEM_STCFG1) & (1<<22);
if (NAND_CS == 2)
- nand_width = au_readl(MEM_STCFG2) & (1 << 22);
+ nand_width = au_readl(MEM_STCFG2) & (1<<22);
if (NAND_CS == 3)
- nand_width = au_readl(MEM_STCFG3) & (1 << 22);
+ nand_width = au_readl(MEM_STCFG3) & (1<<22);
+
/* Set address of hardware control function */
+ this->hwcontrol = au1550_hwcontrol;
this->dev_ready = au1550_device_ready;
- this->select_chip = au1550_select_chip;
- this->cmdfunc = au1550_command;
-
/* 30 us command delay time */
this->chip_delay = 30;
- this->ecc.mode = NAND_ECC_SOFT;
+ this->eccmode = NAND_ECC_SOFT;
this->options = NAND_NO_AUTOINCR;
this->options |= NAND_BUSWIDTH_16;
this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
- au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
+ this->write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
+ this->write_word = au_write_word;
this->read_word = au_read_word;
this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
/* Scan to find existence of the device */
- if (nand_scan(au1550_mtd, 1)) {
+ if (nand_scan (au1550_mtd, 1)) {
retval = -ENXIO;
goto outio;
}
/* Register the partitions */
- add_mtd_partitions(au1550_mtd, partition_info, ARRAY_SIZE(partition_info));
+ add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info));
return 0;
outio:
- iounmap((void *)p_nand);
+ iounmap ((void *)p_nand);
outmem:
- kfree(au1550_mtd);
+ kfree (au1550_mtd);
return retval;
}
/*
* Clean up routine
*/
-static void __exit au1550_cleanup(void)
+#ifdef MODULE
+static void __exit au1550_cleanup (void)
{
- struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
+ struct nand_chip *this = (struct nand_chip *) &au1550_mtd[1];
/* Release resources, unregister device */
- nand_release(au1550_mtd);
+ nand_release (au1550_mtd);
/* Free the MTD device structure */
- kfree(au1550_mtd);
+ kfree (au1550_mtd);
/* Unmap */
- iounmap((void *)p_nand);
+ iounmap ((void *)p_nand);
}
-
module_exit(au1550_cleanup);
+#endif
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Embedded Edge, LLC");