FIXES:
Alan Cox: Removed the 'Unexpected interrupt' bug.
Michael Meskes: Upgraded to Donald Becker's version 1.07.
- Alan Cox: Increased the eeprom delay. Regardless of
+ Alan Cox: Increased the eeprom delay. Regardless of
what the docs say some people definitely
get problems with lower (but in card spec)
delays
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
static int max_interrupt_work = 10;
-#include <linux/config.h>
#include <linux/module.h>
#ifdef CONFIG_MCA
#include <linux/mca.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/pm.h>
+#include <linux/pm_legacy.h>
#include <linux/skbuff.h>
#include <linux/delay.h> /* for udelay() */
#include <linux/spinlock.h>
#include <linux/ethtool.h>
#include <linux/device.h>
#include <linux/eisa.h>
+#include <linux/bitops.h>
#include <asm/uaccess.h>
-#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/irq.h>
static char versionA[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
static char versionB[] __initdata = "http://www.scyld.com/network/3c509.html\n";
+#if defined(CONFIG_PM) && (defined(CONFIG_MCA) || defined(CONFIG_EISA))
+#define EL3_SUSPEND
+#endif
+
#ifdef EL3_DEBUG
static int el3_debug = EL3_DEBUG;
#else
#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */
#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */
-#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */
+#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */
/*
* Must be a power of two (we use a binary and in the
/* skb send-queue */
int head, size;
struct sk_buff *queue[SKB_QUEUE_SIZE];
-#ifdef CONFIG_PM
- struct pm_dev *pmdev;
-#endif
enum {
EL3_MCA,
EL3_PNP,
static ushort read_eeprom(int ioaddr, int index);
static int el3_open(struct net_device *dev);
static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t el3_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
static void update_stats(struct net_device *dev);
static struct net_device_stats *el3_get_stats(struct net_device *dev);
static int el3_rx(struct net_device *dev);
static int el3_close(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static void el3_tx_timeout (struct net_device *dev);
-static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
static void el3_down(struct net_device *dev);
static void el3_up(struct net_device *dev);
-#ifdef CONFIG_PM
-static int el3_suspend(struct pm_dev *pdev);
-static int el3_resume(struct pm_dev *pdev);
-static int el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data);
+static const struct ethtool_ops ethtool_ops;
+#ifdef EL3_SUSPEND
+static int el3_suspend(struct device *, pm_message_t);
+static int el3_resume(struct device *);
+#else
+#define el3_suspend NULL
+#define el3_resume NULL
#endif
+
+
/* generic device remove for all device types */
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
static int el3_device_remove (struct device *device);
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void el3_poll_controller(struct net_device *dev);
+#endif
#ifdef CONFIG_EISA
-struct eisa_device_id el3_eisa_ids[] = {
+static struct eisa_device_id el3_eisa_ids[] = {
{ "TCM5092" },
{ "TCM5093" },
+ { "TCM5095" },
{ "" }
};
+MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
static int el3_eisa_probe (struct device *device);
-struct eisa_driver el3_eisa_driver = {
+static struct eisa_driver el3_eisa_driver = {
.id_table = el3_eisa_ids,
.driver = {
.name = "3c509",
.probe = el3_eisa_probe,
- .remove = __devexit_p (el3_device_remove)
+ .remove = __devexit_p (el3_device_remove),
+ .suspend = el3_suspend,
+ .resume = el3_resume,
}
};
#endif
.bus = &mca_bus_type,
.probe = el3_mca_probe,
.remove = __devexit_p(el3_device_remove),
+ .suspend = el3_suspend,
+ .resume = el3_resume,
},
};
#endif /* CONFIG_MCA */
dev->set_multicast_list = &set_multicast_list;
dev->tx_timeout = el3_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->do_ioctl = netdev_ioctl;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = el3_poll_controller;
+#endif
+ SET_ETHTOOL_OPS(dev, ðtool_ops);
err = register_netdev(dev);
if (err) {
{
const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
printk("%s: 3c5x9 found at %#3.3lx, %s port, address ",
- dev->name, dev->base_addr,
+ dev->name, dev->base_addr,
if_names[(dev->if_port & 0x03)]);
}
struct el3_private *lp = netdev_priv(dev);
(void) lp; /* Keep gcc quiet... */
-#ifdef CONFIG_PM
- if (lp->pmdev)
- pm_unregister(lp->pmdev);
-#endif
#if defined(__ISAPNP__)
if (lp->type == EL3_PNP)
pnp_device_detach(to_pnp_dev(lp->dev));
SET_MODULE_OWNER(dev);
netdev_boot_setup_check(dev);
-
+
/* Set passed-in IRQ or I/O Addr. */
if (dev->irq > 1 && dev->irq < 16)
irq = dev->irq;
if (err)
goto out1;
-#ifdef CONFIG_PM
- /* register power management */
- lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback);
- if (lp->pmdev) {
- struct pm_dev *p;
- p = lp->pmdev;
- p->data = (struct net_device *)dev;
- }
-#endif
-
el3_cards++;
lp->next_dev = el3_root_dev;
el3_root_dev = dev;
if_port = pos4 & 0x03;
irq = mca_device_transform_irq(mdev, irq);
- ioaddr = mca_device_transform_ioport(mdev, ioaddr);
+ ioaddr = mca_device_transform_ioport(mdev, ioaddr);
if (el3_debug > 2) {
printk("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
el3_cards++;
return 0;
}
-
+
#endif /* CONFIG_MCA */
#ifdef CONFIG_EISA
/* Yeepee, The driver framework is calling us ! */
edev = to_eisa_device (device);
ioaddr = edev->base_addr;
-
+
if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
return -EBUSY;
static ushort read_eeprom(int ioaddr, int index)
{
outw(EEPROM_READ + index, ioaddr + 10);
- /* Pause for at least 162 us. for the read to take place.
+ /* Pause for at least 162 us. for the read to take place.
Some chips seem to require much longer */
mdelay(2);
return inw(ioaddr + 12);
/* Pause for at least 162 us. for the read to take place. */
/* Some chips seem to require much longer */
mdelay(4);
-
+
for (bit = 15; bit >= 0; bit--)
word = (word << 1) + (inb(id_port) & 0x01);
netif_stop_queue (dev);
lp->stats.tx_bytes += skb->len;
-
+
if (el3_debug > 4) {
printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
dev->name, skb->len, inw(ioaddr + EL3_STATUS));
outw(skb->len, ioaddr + TX_FIFO);
outw(0x00, ioaddr + TX_FIFO);
/* ... and the packet rounded to a doubleword. */
-#ifdef __powerpc__
- outsl_ns(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-#else
outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-#endif
dev->trans_start = jiffies;
if (inw(ioaddr + TX_FREE) > 1536)
/* The EL3 interrupt handler. */
static irqreturn_t
-el3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+el3_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = (struct net_device *)dev_id;
+ struct net_device *dev = dev_id;
struct el3_private *lp;
int ioaddr, status;
int i = max_interrupt_work;
- if (dev == NULL) {
- printk ("el3_interrupt(): irq %d for unknown device.\n", irq);
- return IRQ_NONE;
- }
-
lp = netdev_priv(dev);
spin_lock(&lp->lock);
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void el3_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ el3_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
static struct net_device_stats *
el3_get_stats(struct net_device *dev)
{
* This is fast enough not to bother with disable IRQ
* stuff.
*/
-
+
spin_lock_irqsave(&lp->lock, flags);
update_stats(dev);
spin_unlock_irqrestore(&lp->lock, flags);
skb_reserve(skb, 2); /* Align IP on 16 byte */
/* 'skb->data' points to the start of sk_buff data area. */
-#ifdef __powerpc__
- insl_ns(ioaddr+RX_FIFO, skb_put(skb,pkt_len),
- (pkt_len + 3) >> 2);
-#else
insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len),
(pkt_len + 3) >> 2);
-#endif
outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
skb->protocol = eth_type_trans(skb,dev);
{
int ioaddr = dev->base_addr;
struct el3_private *lp = netdev_priv(dev);
-
+
if (el3_debug > 2)
printk("%s: Shutting down ethercard.\n", dev->name);
return 0;
}
-static int
+static int
el3_link_ok(struct net_device *dev)
{
int ioaddr = dev->base_addr;
{
u16 tmp;
int ioaddr = dev->base_addr;
-
+
EL3WINDOW(0);
- /* obtain current transceiver via WN4_MEDIA? */
+ /* obtain current transceiver via WN4_MEDIA? */
tmp = inw(ioaddr + WN0_ADDR_CONF);
ecmd->transceiver = XCVR_INTERNAL;
switch (tmp >> 14) {
return 0;
}
-/**
- * netdev_ethtool_ioctl: Handle network interface SIOCETHTOOL ioctls
- * @dev: network interface on which out-of-band action is to be performed
- * @useraddr: userspace address to which data is to be read and returned
- *
- * Process the various commands of the SIOCETHTOOL interface.
- */
+static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+}
-static int
-netdev_ethtool_ioctl (struct net_device *dev, void __user *useraddr)
+static int el3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
- u32 ethcmd;
struct el3_private *lp = netdev_priv(dev);
+ int ret;
- /* dev_ioctl() in ../../net/core/dev.c has already checked
- capable(CAP_NET_ADMIN), so don't bother with that here. */
-
- if (get_user(ethcmd, (u32 __user *)useraddr))
- return -EFAULT;
-
- switch (ethcmd) {
-
- case ETHTOOL_GDRVINFO: {
- struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
- strcpy (info.driver, DRV_NAME);
- strcpy (info.version, DRV_VERSION);
- if (copy_to_user (useraddr, &info, sizeof (info)))
- return -EFAULT;
- return 0;
- }
-
- /* get settings */
- case ETHTOOL_GSET: {
- int ret;
- struct ethtool_cmd ecmd = { ETHTOOL_GSET };
- spin_lock_irq(&lp->lock);
- ret = el3_netdev_get_ecmd(dev, &ecmd);
- spin_unlock_irq(&lp->lock);
- if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
- return -EFAULT;
- return ret;
- }
-
- /* set settings */
- case ETHTOOL_SSET: {
- int ret;
- struct ethtool_cmd ecmd;
- if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
- return -EFAULT;
- spin_lock_irq(&lp->lock);
- ret = el3_netdev_set_ecmd(dev, &ecmd);
- spin_unlock_irq(&lp->lock);
- return ret;
- }
-
- /* get link status */
- case ETHTOOL_GLINK: {
- struct ethtool_value edata = { ETHTOOL_GLINK };
- spin_lock_irq(&lp->lock);
- edata.data = el3_link_ok(dev);
- spin_unlock_irq(&lp->lock);
- if (copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- return 0;
- }
-
- /* get message-level */
- case ETHTOOL_GMSGLVL: {
- struct ethtool_value edata = {ETHTOOL_GMSGLVL};
- edata.data = el3_debug;
- if (copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- return 0;
- }
- /* set message-level */
- case ETHTOOL_SMSGLVL: {
- struct ethtool_value edata;
- if (copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- el3_debug = edata.data;
- return 0;
- }
+ spin_lock_irq(&lp->lock);
+ ret = el3_netdev_get_ecmd(dev, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
- default:
- break;
- }
+static int el3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ret;
- return -EOPNOTSUPP;
+ spin_lock_irq(&lp->lock);
+ ret = el3_netdev_set_ecmd(dev, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return ret;
}
-/**
- * netdev_ioctl: Handle network interface ioctls
- * @dev: network interface on which out-of-band action is to be performed
- * @rq: user request data
- * @cmd: command issued by user
- *
- * Process the various out-of-band ioctls passed to this driver.
- */
-
-static int
-netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+static u32 el3_get_link(struct net_device *dev)
{
- int rc = 0;
+ struct el3_private *lp = netdev_priv(dev);
+ u32 ret;
- switch (cmd) {
- case SIOCETHTOOL:
- rc = netdev_ethtool_ioctl(dev, rq->ifr_data);
- break;
+ spin_lock_irq(&lp->lock);
+ ret = el3_link_ok(dev);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
- default:
- rc = -EOPNOTSUPP;
- break;
- }
+static u32 el3_get_msglevel(struct net_device *dev)
+{
+ return el3_debug;
+}
- return rc;
+static void el3_set_msglevel(struct net_device *dev, u32 v)
+{
+ el3_debug = v;
}
+static const struct ethtool_ops ethtool_ops = {
+ .get_drvinfo = el3_get_drvinfo,
+ .get_settings = el3_get_settings,
+ .set_settings = el3_set_settings,
+ .get_link = el3_get_link,
+ .get_msglevel = el3_get_msglevel,
+ .set_msglevel = el3_set_msglevel,
+};
+
static void
el3_down(struct net_device *dev)
{
{
int i, sw_info, net_diag;
int ioaddr = dev->base_addr;
-
+
/* Activating the board required and does no harm otherwise */
outw(0x0001, ioaddr + 4);
/* Combine secondary sw_info word (the adapter level) and primary
sw_info word (duplex setting plus other useless bits) */
EL3WINDOW(0);
- sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) |
+ sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) |
(read_eeprom(ioaddr, 0x0d) & 0xBff0);
EL3WINDOW(4);
}
/* Power Management support functions */
-#ifdef CONFIG_PM
+#ifdef EL3_SUSPEND
static int
-el3_suspend(struct pm_dev *pdev)
+el3_suspend(struct device *pdev, pm_message_t state)
{
unsigned long flags;
struct net_device *dev;
struct el3_private *lp;
int ioaddr;
-
- if (!pdev && !pdev->data)
- return -EINVAL;
- dev = (struct net_device *)pdev->data;
+ dev = pdev->driver_data;
lp = netdev_priv(dev);
ioaddr = dev->base_addr;
}
static int
-el3_resume(struct pm_dev *pdev)
+el3_resume(struct device *pdev)
{
unsigned long flags;
struct net_device *dev;
struct el3_private *lp;
int ioaddr;
-
- if (!pdev && !pdev->data)
- return -EINVAL;
- dev = (struct net_device *)pdev->data;
+ dev = pdev->driver_data;
lp = netdev_priv(dev);
ioaddr = dev->base_addr;
if (netif_running(dev))
netif_device_attach(dev);
-
- spin_unlock_irqrestore(&lp->lock, flags);
- return 0;
-}
-
-static int
-el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
-{
- switch (rqst) {
- case PM_SUSPEND:
- return el3_suspend(pdev);
- case PM_RESUME:
- return el3_resume(pdev);
- }
+ spin_unlock_irqrestore(&lp->lock, flags);
return 0;
}
-#endif /* CONFIG_PM */
+#endif /* EL3_SUSPEND */
/* Parameters that may be passed into the module. */
static int debug = -1;
static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
static int xcvr[] = {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1};
-MODULE_PARM(debug,"i");
-MODULE_PARM(irq,"1-8i");
-MODULE_PARM(xcvr,"1-12i");
-MODULE_PARM(max_interrupt_work, "i");
+module_param(debug,int, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(xcvr, int, NULL, 0);
+module_param(max_interrupt_work, int, 0);
MODULE_PARM_DESC(debug, "debug level (0-6)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)");
MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
#if defined(__ISAPNP__)
-MODULE_PARM(nopnp, "i");
+module_param(nopnp, int, 0);
MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters);
#endif /* __ISAPNP__ */
static int __init el3_init_module(void)
{
+ int ret = 0;
el3_cards = 0;
if (debug >= 0)
}
#ifdef CONFIG_EISA
- if (eisa_driver_register (&el3_eisa_driver) < 0) {
- eisa_driver_unregister (&el3_eisa_driver);
- }
+ ret = eisa_driver_register(&el3_eisa_driver);
#endif
#ifdef CONFIG_MCA
- mca_register_driver(&el3_mca_driver);
+ {
+ int err = mca_register_driver(&el3_mca_driver);
+ if (ret == 0)
+ ret = err;
+ }
#endif
- return 0;
+ return ret;
}
static void __exit el3_cleanup_module(void)