module by all drivers that require it.
Alan Cox : Spinlocking work, added 'BUG_83C690'
Paul Gortmaker : Separate out Tx timeout code from Tx path.
+ Paul Gortmaker : Remove old unused single Tx buffer code.
+ Hayato Fujiwara : Add m32r support.
+ Paul Gortmaker : use skb_padto() instead of stack scratch area
Sources:
The National Semiconductor LAN Databook, and the 3Com 3c503 databook.
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/string.h>
+#include <linux/bitops.h>
#include <asm/system.h>
#include <asm/uaccess.h>
-#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/delay.h>
int txsr, isr, tickssofar = jiffies - dev->trans_start;
unsigned long flags;
+#if defined(CONFIG_M32R) && defined(CONFIG_SMP)
+ unsigned long icucr;
+
+ local_irq_save(flags);
+ icucr = inl(M32R_ICU_CR1_PORTL);
+ icucr |= M32R_ICUCR_ISMOD11;
+ outl(icucr, M32R_ICU_CR1_PORTL);
+ local_irq_restore(flags);
+#endif
ei_local->stat.tx_errors++;
spin_lock_irqsave(&ei_local->page_lock, flags);
{
long e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
- int length, send_length, output_page;
+ int send_length = skb->len, output_page;
unsigned long flags;
- char scratch[ETH_ZLEN];
- length = skb->len;
+ if (skb->len < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ return 0;
+ send_length = ETH_ZLEN;
+ }
/* Mask interrupts from the ethercard.
SMP: We have to grab the lock here otherwise the IRQ handler
ei_local->irqlock = 1;
- send_length = ETH_ZLEN < length ? length : ETH_ZLEN;
-
-#ifdef EI_PINGPONG
-
/*
* We have two Tx slots available for use. Find the first free
* slot, and then perform some sanity checks. With two Tx bufs,
}
else if (ei_local->tx2 == 0)
{
- output_page = ei_local->tx_start_page + TX_1X_PAGES;
+ output_page = ei_local->tx_start_page + TX_PAGES/2;
ei_local->tx2 = send_length;
if (ei_debug && ei_local->tx1 > 0)
printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n",
* trigger the send later, upon receiving a Tx done interrupt.
*/
- if (length == send_length)
- ei_block_output(dev, length, skb->data, output_page);
- else {
- memset(scratch, 0, ETH_ZLEN);
- memcpy(scratch, skb->data, skb->len);
- ei_block_output(dev, ETH_ZLEN, scratch, output_page);
- }
+ ei_block_output(dev, send_length, skb->data, output_page);
if (! ei_local->txing)
{
else
netif_start_queue(dev);
-#else /* EI_PINGPONG */
-
- /*
- * Only one Tx buffer in use. You need two Tx bufs to come close to
- * back-to-back transmits. Expect a 20 -> 25% performance hit on
- * reasonable hardware if you only use one Tx buffer.
- */
-
- if (length == send_length)
- ei_block_output(dev, length, skb->data, ei_local->tx_start_page);
- else {
- memset(scratch, 0, ETH_ZLEN);
- memcpy(scratch, skb->data, skb->len);
- ei_block_output(dev, ETH_ZLEN, scratch, ei_local->tx_start_page);
- }
- ei_local->txing = 1;
- NS8390_trigger_send(dev, send_length, ei_local->tx_start_page);
- dev->trans_start = jiffies;
- netif_stop_queue(dev);
-
-#endif /* EI_PINGPONG */
-
/* Turn 8390 interrupts back on. */
ei_local->irqlock = 0;
outb_p(ENISR_ALL, e8390_base + EN0_IMR);
outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */
-#ifdef EI_PINGPONG
-
/*
* There are two Tx buffers, see which one finished, and trigger
* the send of another one if it exists.
// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n",
// dev->name, ei_local->lasttx);
-#else /* EI_PINGPONG */
- /*
- * Single Tx buffer: mark it free so another packet can be loaded.
- */
- ei_local->txing = 0;
-#endif
-
/* Minimize Tx latency: update the statistics after we restart TXing. */
if (status & ENTSR_COL)
ei_local->stat.collisions++;
* We wait at least 10ms.
*/
- udelay(10*1000);
+ mdelay(10);
/*
* Reset RBCR[01] back to zero as per magic incantation.
/**
* alloc_ei_netdev - alloc_etherdev counterpart for 8390
+ * @size: extra bytes to allocate
*
* Allocate 8390-specific net_device.
*/
outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD);
- if (inb_p(e8390_base) & E8390_TRANS)
+ if (inb_p(e8390_base + E8390_CMD) & E8390_TRANS)
{
printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n",
dev->name);
#ifdef CONFIG_NET_POLL_CONTROLLER
EXPORT_SYMBOL(ei_poll);
#endif
-EXPORT_SYMBOL(ei_tx_timeout);
EXPORT_SYMBOL(NS8390_init);
EXPORT_SYMBOL(__alloc_ei_netdev);