config TUN
tristate "Universal TUN/TAP device driver support"
depends on NETDEVICES
+ select CRC32
---help---
TUN/TAP provides packet reception and transmission for user space
programs. It can be viewed as a simple Point-to-Point or Ethernet
config MACE
tristate "MACE (Power Mac ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
select CRC32
help
Power Macintoshes and clones with Ethernet built-in on the
config BMAC
tristate "BMAC (G3 ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
select CRC32
help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
config OAKNET
tristate "National DP83902AV (Oak ethernet) support"
- depends on NET_ETHERNET && PPC
+ depends on NET_ETHERNET && PPC && BROKEN
select CRC32
help
Say Y if your machine has this type of Ethernet network card.
config APNE
tristate "PCMCIA NE2000 support"
- depends on NETDEVICES && AMIGA_PCMCIA
+ depends on NET_ETHERNET && AMIGA_PCMCIA
select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
- depends on NETDEVICES && APOLLO
+ depends on NET_ETHERNET && APOLLO
help
Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
If you don't have one made for Apollos, you can use one from a PC,
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
- depends on NETDEVICES && MAC
+ depends on NET_ETHERNET && MAC
select CRC32
help
If you want to include a driver to support Nubus or LC-PDS
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
- depends on NETDEVICES && MAC && BROKEN
+ depends on NET_ETHERNET && MAC && BROKEN
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
- depends on NETDEVICES && MAC
+ depends on NET_ETHERNET && MAC
---help---
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
- depends on NETDEVICES && MAC && EXPERIMENTAL
+ depends on NET_ETHERNET && MAC && EXPERIMENTAL
select CRC32
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
- depends on NETDEVICES && MVME147
+ depends on NET_ETHERNET && MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
config MVME16x_NET
tristate "MVME16x Ethernet support"
- depends on NETDEVICES && MVME16x
+ depends on NET_ETHERNET && MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
config BVME6000_NET
tristate "BVME6000 Ethernet support"
- depends on NETDEVICES && BVME6000
+ depends on NET_ETHERNET && BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
config ATARILANCE
tristate "Atari Lance support"
- depends on NETDEVICES && ATARI
+ depends on NET_ETHERNET && ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
config ATARI_BIONET
tristate "BioNet-100 support"
- depends on NETDEVICES && ATARI && ATARI_ACSI!=n && BROKEN
+ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for BioData's BioNet-100 Ethernet adapter
for the ACSI port. The driver works (has to work...) with a polled
config ATARI_PAMSNET
tristate "PAMsNet support"
- depends on NETDEVICES && ATARI && ATARI_ACSI!=n && BROKEN
+ depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
help
Say Y to include support for the PAMsNet Ethernet adapter for the
ACSI port ("ACSI node"). The driver works (has to work...) with a
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
- depends on NETDEVICES && (SUN3 || SUN3X)
+ depends on NET_ETHERNET && (SUN3 || SUN3X)
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
config SUN3_82586
tristate "Sun3 on-board Intel 82586 support"
- depends on NETDEVICES && SUN3
+ depends on NET_ETHERNET && SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
config HPLANCE
bool "HP on-board LANCE support"
- depends on NETDEVICES && HP300
+ depends on NET_ETHERNET && DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
- depends on NET_VENDOR_3COM && MCA
+ depends on NET_VENDOR_3COM && MCA_LEGACY
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on NET_VENDOR_3COM && (PCI || EISA)
+ select MII
---help---
This option enables driver support for a large number of 10mbps and
10/100mbps EISA, PCI and PCMCIA 3Com network cards:
<file:Documentation/networking/net-modules.txt>. The module
will be called smc-ultra32.
+config SMC91X
+ tristate "SMC 91C9x/91C1xxx support"
+ select CRC32
+ select MII
+ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R)
+ help
+ This is a driver for SMC's 91x series of Ethernet chipsets,
+ including the SMC91C94 and the SMC91C111. Say Y if you want it
+ compiled into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.linuxdoc.org/docs.html#howto>.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called smc91x. If you want to compile it as a
+ module, say M here and read <file:Documentation/modules.txt> as well
+ as <file:Documentation/networking/net-modules.txt>.
+
config SMC9194
tristate "SMC 9194 support"
depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
config AT1700
tristate "AT1700/1720/RE1000Plus(C-Bus) support (EXPERIMENTAL)"
- depends on NET_ETHERNET && (ISA || MCA) && EXPERIMENTAL
+ depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config NET_ISA
bool "Other ISA cards"
- depends on NET_ETHERNET && ISA && !X86_PC9800
+ depends on NET_ETHERNET && ISA
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
config NE2000
tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m)
+ depends on NET_ISA || (Q40 && m) || M32R
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
-config NET_CBUS
- bool "NEC PC-9800 C-bus cards"
- depends on NET_ETHERNET && ISA && X86_PC9800
- ---help---
- If your network (Ethernet) card hasn't been mentioned yet and its
- bus system (that's the way the cards talks to the other components
- of your computer) is NEC PC-9800 C-Bus, say Y.
-
-config NE2K_CBUS
- tristate "Most NE2000-based Ethernet support"
- depends on NET_CBUS
- select CRC32
-
-config NE2K_CBUS_EGY98
- bool "Melco EGY-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_LGY98
- bool "Melco LGY-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_ICM
- bool "ICM IF-27xxET support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_IOLA98
- bool "I-O DATA LA-98 support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL
- bool "Contec C-NET(98)E/L support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_CNET98EL_IO_BASE
- hex "C-NET(98)E/L I/O base address (0xaaed or 0x55ed)"
- depends on NE2K_CBUS_CNET98EL
- default "0xaaed"
-
-config NE2K_CBUS_ATLA98
- bool "Allied Telesis LA-98 Support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_BDN
- bool "ELECOM Laneed LD-BDN[123]A Support"
- depends on NE2K_CBUS
-
-config NE2K_CBUS_NEC108
- bool "NEC PC-9801-108 Support"
- depends on NE2K_CBUS
-
config SKMC
tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA && BROKEN
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
- depends on NET_ETHERNET && MCA
+ depends on NET_ETHERNET && MCA_LEGACY
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
be called ibmveth.
config IBM_EMAC
- tristate "IBM PPC4xx EMAC driver support"
- depends on 4xx
- ---help---
- This driver supports the IBM PPC4xx EMAC family of on-chip
- Ethernet controllers.
+ tristate "IBM PPC4xx EMAC driver support"
+ depends on 4xx
+ select CRC32
+ ---help---
+ This driver supports the IBM PPC4xx EMAC family of on-chip
+ Ethernet controllers.
config IBM_EMAC_ERRMSG
- bool "Verbose error messages"
- depends on IBM_EMAC
+ bool "Verbose error messages"
+ depends on IBM_EMAC
config IBM_EMAC_RXB
- int "Number of receive buffers"
- depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "64"
+ int "Number of receive buffers"
+ depends on IBM_EMAC
+ default "128" if IBM_EMAC4
+ default "64"
config IBM_EMAC_TXB
- int "Number of transmit buffers"
- depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "8"
+ int "Number of transmit buffers"
+ depends on IBM_EMAC
+ default "128" if IBM_EMAC4
+ default "8"
config IBM_EMAC_FGAP
- int "Frame gap"
- depends on IBM_EMAC
- default "8"
+ int "Frame gap"
+ depends on IBM_EMAC
+ default "8"
config IBM_EMAC_SKBRES
- int "Skb reserve amount"
- depends on IBM_EMAC
- default "0"
+ int "Skb reserve amount"
+ depends on IBM_EMAC
+ default "0"
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
config AMD8111E_NAPI
bool "Enable NAPI support"
depends on AMD8111_ETH
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
config AC3200
tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
config CS89x0
tristate "CS89x0 support"
- depends on NET_PCI && ISA
+ depends on NET_PCI && (ISA || ARCH_IXDP2X01)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
will be called eepro100.
-config EEPRO100_PIO
- bool "Use PIO instead of MMIO" if !X86_VISWS
- depends on EEPRO100
- default y if X86_VISWS
- help
- This instructs the driver to use programmed I/O ports (PIO) instead
- of PCI shared memory (MMIO). This can possibly solve some problems
- in case your mainboard has memory consistency issues. If unsure,
- say N.
-
config E100
tristate "Intel(R) PRO/100+ support"
depends on NET_PCI && PCI
select MII
---help---
- This driver supports Intel(R) PRO/100 family of adapters, which
- includes:
-
- Controller Adapter Name Board IDs
- ---------- ------------ ---------
-
- 82558 PRO/100+ PCI Adapter 668081-xxx,
- 689661-xxx
- 82558 PRO/100+ Management Adapter 691334-xxx,
- 701738-xxx,
- 721383-xxx
- 82558 PRO/100+ Dual Port Server Adapter 714303-xxx,
- 711269-xxx,
- A28276-xxx
- 82558 PRO/100+ PCI Server Adapter 710550-xxx
- 82550 PRO/100 S Server Adapter 752438-xxx
- 82559 A56831-xxx,
- A10563-xxx,
- A12171-xxx,
- A12321-xxx,
- A12320-xxx,
- A12170-xxx
- 748568-xxx
- 748565-xxx
- 82550 PRO/100 S Desktop Adapter 751767-xxx
- 82559 748592-xxx,
- A12167-xxx,
- A12318-xxx,
- A12317-xxx,
- A12165-xxx,
- 748569-xxx
- 82559 PRO/100+ Server Adapter 729757-xxx
- 82559 PRO/100 S Management Adapter 748566-xxx,
- 748564-xxx
- 82550 PRO/100 S Dual Port Server Adapter A56831-xxx
- 82551 PRO/100 M Desktop Adapter A80897-xxx
- PRO/100 S Advanced Management Adapter
- 747842-xxx,
- 745171-xxx
- CNR PRO/100 VE Desktop Adapter A10386-xxx,
- A10725-xxx,
- A23801-xxx,
- A19716-xxx
- PRO/100 VM Desktop Adapter A14323-xxx,
- A19725-xxx,
- A23801-xxx,
- A22220-xxx,
- A23796-xxx
-
-
+ This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
- in the format 123456-001 (six digits hyphen three digits). Match
- this to the list of numbers above.
+ in the format 123456-001 (six digits hyphen three digits).
+
+ Use the above information and the Adapter & Driver ID Guide at:
- For more information on how to identify your adapter, go to the
- Adapter & Driver ID Guide at:
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
- http://support.intel.com/support/network/adapter/pro100/21397.htm
+ to identify the adapter.
For the latest Intel PRO/100 network driver for Linux, see:
- http://appsr.intel.com/scripts-df/support_intel.asp
+ <http://appsr.intel.com/scripts-df/support_intel.asp>
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
config E100_NAPI
bool "Use Rx Polling (NAPI)"
depends on E100
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
config LNE390
tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the RTL8139 chips. If you have one of those, say Y and read
- <file:Documentation/networking/8139too.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+ the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the module
will be called 8139too. This is recommended.
<file:Documentation/networking/net-modules.txt>. The module
will be called tlan.
- Please email feedback to torben.mathiasen@compaq.com.
+ Please email feedback to <torben.mathiasen@compaq.com>.
config VIA_RHINE
tristate "VIA Rhine support"
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
+source "drivers/net/fec_8xx/Kconfig"
+
endmenu
#
depends on PCI
---help---
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
- adapters, which includes:
-
- Controller Adapter Name Board IDs
- ---------- ------------ ---------
- 82542 PRO/1000 Gigabit Server Adapter 700262-xxx,
- 717037-xxx
- 82543 PRO/1000 F Server Adapter 738640-xxx,
- A38888-xxx
- 82543 PRO/1000 T Server Adapter A19845-xxx,
- A33948-xxx
- 82544 PRO/1000 XT Server Adapter A51580-xxx
- 82544 PRO/1000 XF Server Adapter A50484-xxx
- 82544 PRO/1000 T Desktop Adapter A62947-xxx
- 82540 PRO/1000 MT Desktop Adapter A78408-xxx
- 82541 PRO/1000 MT Desktop Adapter C91016-xxx
- 82545 PRO/1000 MT Server Adapter A92165-xxx
- 82546 PRO/1000 MT Dual Port Server Adapter A92111-xxx
- 82545 PRO/1000 MF Server Adapter A91622-xxx
- 82545 PRO/1000 MF Server Adapter(LX) A91624-xxx
- 82546 PRO/1000 MF Dual Port Server Adapter A91620-xxx
-
- For more information on how to identify your adapter, go to the
- Adapter & Driver ID Guide at:
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
config E1000_NAPI
bool "Use Rx Polling (NAPI)"
depends on E1000
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
config MYRI_SBUS
tristate "MyriCOM Gigabit Ethernet support"
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
+config R8169_NAPI
+ bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+ depends on R8169 && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config R8169_VLAN
+ bool "VLAN support"
+ depends on R8169 && VLAN_8021Q
+ ---help---
+ Say Y here for the r8169 driver to support the functions required
+ by the kernel 802.1Q code.
+
+ If in doubt, say Y.
+
config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
depends on PCI
The dual link adapters support link-failover and dual port features.
Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
the scatter-gather functionality with sendfile(). Please refer to
- Documentation/networking/sk98lin.txt for more information about
+ <file:Documentation/networking/sk98lin.txt> for more information about
optional driver parameters.
Questions concerning this driver may be addressed to:
- linux@syskonnect.de
+ <linux@syskonnect.de>
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read Documentation/kbuild/modules.txt. The module will
+ say M here and read <file:Documentation/kbuild/modules.txt>. The module will
be called sk98lin. This is recommended.
+config VIA_VELOCITY
+ tristate "VIA Velocity support"
+ depends on NET_PCI && PCI
+ select CRC32
+ select CRC_CCITT
+ select MII
+ help
+ If you have a VIA "Velocity" based network card say Y here.
+
+ To compile this driver as a module, choose M here. The module
+ will be called via-velocity.
+
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
+config GIANFAR
+ tristate "Gianfar Ethernet"
+ depends on 85xx
+ help
+ This driver supports the Gigabit TSEC on the MPC85xx
+ family of chips, and the FEC on the 8540
+
+config GFAR_NAPI
+ bool "NAPI Support"
+ depends on GIANFAR
+
+config MV643XX_ETH
+ tristate "MV-643XX Ethernet support"
+ depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX
+ help
+ This driver supports the gigabit Ethernet on the Marvell MV643XX
+ chipset which is used in the Momenco Ocelot C and Jaguar ATX.
+
+config MV643XX_ETH_0
+ bool "MV-643XX Port 0"
+ depends on MV643XX_ETH
+ help
+ This enables support for Port 0 of the Marvell MV643XX Gigabit
+ Ethernet.
+
+config MV643XX_ETH_1
+ bool "MV-643XX Port 1"
+ depends on MV643XX_ETH
+ help
+ This enables support for Port 1 of the Marvell MV643XX Gigabit
+ Ethernet.
+
+config MV643XX_ETH_2
+ bool "MV-643XX Port 2"
+ depends on MV643XX_ETH
+ help
+ This enables support for Port 2 of the Marvell MV643XX Gigabit
+ Ethernet.
+
endmenu
#
depends on PCI
---help---
This driver supports Intel(R) PRO/10GbE family of
- adapters, which includes:
-
- Controller Adapter Name Board IDs
- ---------- ------------ ---------
- 82597EX Intel(R) PRO/10GbE LR Server Adapter A82505-xxx
-
- For more information on how to identify your adapter, go to the
- Adapter & Driver ID Guide at:
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
config IXGB_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on IXGB && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
config S2IO
tristate "S2IO 10Gbe XFrame NIC"
config S2IO_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on S2IO && EXPERIMENTAL
+ help
+ NAPI is a new driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card. It is
+ still somewhat experimental and thus not yet enabled by default.
+
+ If your estimated Rx load is 10kpps or more, or if the card will be
+ deployed on potentially unfriendly networks (e.g. in a firewall),
+ then say Y here.
+
+ See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+ information.
+
+ If in doubt, say N.
+
+config 2BUFF_MODE
+ bool "Use 2 Buffer Mode on Rx side."
+ depends on S2IO
+ ---help---
+ On enabling the 2 buffer mode, the received frame will be
+ split into 2 parts before being DMA'ed to the hosts memory.
+ The parts are the ethernet header and ethernet payload.
+ This is useful on systems where DMA'ing to to unaligned
+ physical memory loactions comes with a heavy price.
+ If not sure please say N.
endmenu
the driver.
Questions concerning this driver can be addressed to:
- linux@syskonnect.de
+ <linux@syskonnect.de>
To compile this driver as a module, choose M here: the module
will be called skfp. This is recommended.
config PPP_ASYNC
tristate "PPP support for async serial ports"
depends on PPP
+ select CRC_CCITT
---help---
Say Y (or M) here if you want to be able to use PPP over standard
asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
This driver requires the latest version of pppd from the CVS
repository at cvs.samba.org. Alternatively, see the
- RoaringPenguin package (http://www.roaringpenguin.com/pppoe)
+ RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
which contains instruction on how to use this driver (under
the heading "Kernel mode PPPoE").
depends on NETDEVICES && EXPERIMENTAL
---help---
If you want to log kernel messages over the network, enable this.
- See Documentation/networking/netconsole.txt for details.
+ See <file:Documentation/networking/netconsole.txt> for details.
+
git://git.onelab.eu / linux-2.6.git / blobdiff