* - struct init cleanup, enable multiple ISA autoprobes.
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
* - fix sbni: s/device/net_device/
- * Paul Gortmaker (06/98):
+ * Paul Gortmaker (06/98):
* - sort probes in a sane way, make sure all (safe) probes
* get run once & failed autoprobes don't autoprobe again.
*
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/config.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/trdevice.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/netlink.h>
-#include <linux/divert.h>
/* A unified ethernet device probe. This is the easiest way to have every
ethernet adaptor have the name "eth[0123...]".
extern struct net_device *tc515_probe(int unit);
extern struct net_device *lance_probe(int unit);
extern struct net_device *mace_probe(int unit);
-extern struct net_device *macsonic_probe(int unit);
extern struct net_device *mac8390_probe(int unit);
extern struct net_device *mac89x0_probe(int unit);
extern struct net_device *mc32_probe(int unit);
extern struct net_device *cops_probe(int unit);
extern struct net_device *ltpc_probe(void);
-
+
/* Detachable devices ("pocket adaptors") */
extern struct net_device *de620_probe(int unit);
*/
static struct devprobe2 eisa_probes[] __initdata = {
-#ifdef CONFIG_ULTRA32
- {ultra32_probe, 0},
+#ifdef CONFIG_ULTRA32
+ {ultra32_probe, 0},
#endif
-#ifdef CONFIG_AC3200
+#ifdef CONFIG_AC3200
{ac3200_probe, 0},
#endif
#ifdef CONFIG_ES3210
* look for EISA/PCI/MCA cards in addition to ISA cards).
*/
static struct devprobe2 isa_probes[] __initdata = {
-#ifdef CONFIG_HP100 /* ISA, EISA & PCI */
+#if defined(CONFIG_HP100) && defined(CONFIG_ISA) /* ISA, EISA */
{hp100_probe, 0},
-#endif
+#endif
#ifdef CONFIG_3C515
{tc515_probe, 0},
#endif
-#ifdef CONFIG_ULTRA
+#ifdef CONFIG_ULTRA
{ultra_probe, 0},
#endif
-#ifdef CONFIG_WD80x3
+#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
#ifdef CONFIG_EL2 /* 3c503 */
#ifdef CONFIG_SMC9194
{smc_init, 0},
#endif
-#ifdef CONFIG_SEEQ8005
+#ifdef CONFIG_SEEQ8005
{seeq8005_probe, 0},
#endif
#ifdef CONFIG_CS89x0
#ifdef CONFIG_AT1700
{at1700_probe, 0},
#endif
-#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */
- {fmv18x_probe, 0},
-#endif
#ifdef CONFIG_ETH16I
{eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */
#endif
#ifdef CONFIG_ELPLUS /* 3c505 */
{elplus_probe, 0},
#endif
-#ifdef CONFIG_SK_G16
- {SK_init, 0},
-#endif
#ifdef CONFIG_NI5010
{ni5010_probe, 0},
#endif
#ifdef CONFIG_MACMACE /* Mac 68k Quadra AV builtin Ethernet */
{mace_probe, 0},
#endif
-#ifdef CONFIG_MACSONIC /* Mac SONIC-based Ethernet of all sorts */
- {macsonic_probe, 0},
-#endif
#ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */
{mac8390_probe, 0},
#endif
* Unified ethernet device probe, segmented per architecture and
* per bus interface. This drives the legacy devices only for now.
*/
-
+
static void __init ethif_probe2(int unit)
{
unsigned long base_addr = netdev_boot_base("eth", unit);
#ifdef CONFIG_TR
/* Token-ring device probe */
extern int ibmtr_probe_card(struct net_device *);
-extern struct net_device *sk_isa_probe(int unit);
-extern struct net_device *proteon_probe(int unit);
extern struct net_device *smctr_probe(int unit);
static struct devprobe2 tr_probes2[] __initdata = {
-#ifdef CONFIG_SKISA
- {sk_isa_probe, 0},
-#endif
-#ifdef CONFIG_PROTEON
- {proteon_probe, 0},
-#endif
#ifdef CONFIG_SMCTR
{smctr_probe, 0},
#endif
}
#endif
-
-/*
- * The loopback device is global so it can be directly referenced
- * by the network code. Also, it must be first on device list.
- */
-extern int loopback_init(void);
/* Statically configured drivers -- order matters here. */
static int __init net_olddevs_init(void)
{
int num;
- if (loopback_init()) {
- printk(KERN_ERR "Network loopback device setup failed\n");
- }
-
-
#ifdef CONFIG_SBNI
for (num = 0; num < 8; ++num)
sbni_probe(num);