Oskar Schirmer : oskar@scara.com
: HiCO.SH4 (superh) support added (irq#1, cs89x0_media=)
+ Deepak Saxena : dsaxena@plexity.net
+ : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support
+
+ Dmitry Pervushin : dpervushin@ru.mvista.com
+ : PNX010X platform support
+
+ Deepak Saxena : dsaxena@plexity.net
+ : Intel IXDP2351 platform support
+
+ Dmitry Pervushin : dpervushin@ru.mvista.com
+ : PNX010X platform support
+
*/
/* Always include 'config.h' first in case the user wants to turn on
* Note that even if DMA is turned off we still support the 'dma' and 'use_dma'
* module options so we don't break any startup scripts.
*/
+#ifndef CONFIG_ISA_DMA_API
+#define ALLOW_DMA 0
+#else
#define ALLOW_DMA 1
+#endif
/*
* Set this to zero to remove all the debug statements via
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
#include <asm/system.h>
-#include <asm/bitops.h>
#include <asm/io.h>
+#include <asm/irq.h>
#if ALLOW_DMA
#include <asm/dma.h>
#endif
static char version[] __initdata =
"cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton <andrewm@uow.edu.au>\n";
+#define DRV_NAME "cs89x0"
+
/* First, a few definitions that the brave might change.
A zero-terminated list of I/O addresses to be probed. Some special flags..
Addr & 1 = Read back the address port, look for signature and reset
static unsigned int netcard_portlist[] __initdata =
{ 0x0300, 0};
static unsigned int cs8900_irq_map[] = {1,0,0,0};
+#elif defined(CONFIG_MACH_IXDP2351)
+static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
+static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
+#include <asm/irq.h>
+#elif defined(CONFIG_ARCH_IXDP2X01)
+#include <asm/irq.h>
+static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
+static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#elif defined(CONFIG_ARCH_PNX010X)
+#include <asm/irq.h>
+#include <asm/arch/gpio.h>
+#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
+#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
+static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
+static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
#else
static unsigned int netcard_portlist[] __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static int get_eeprom_cksum(int off, int len, int *buffer);
static int set_mac_address(struct net_device *dev, void *addr);
static void count_rx_errors(int status, struct net_local *lp);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void net_poll_controller(struct net_device *dev);
+#endif
#if ALLOW_DMA
static void get_dma_channel(struct net_device *dev);
static void release_dma_buff(struct net_local *lp);
}
__setup("cs89x0_media=", media_fn);
-#endif
\f
/* Check for a network adaptor of this type, and return '0' iff one exists.
}
if (err)
goto out;
- err = register_netdev(dev);
- if (err)
- goto out1;
return dev;
-out1:
- outw(PP_ChipID, dev->base_addr + ADD_PORT);
- release_region(dev->base_addr, NETCARD_IO_EXTENT);
out:
free_netdev(dev);
printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
return ERR_PTR(err);
}
+#endif
-static int
-readreg(struct net_device *dev, int portno)
+#if defined(CONFIG_MACH_IXDP2351)
+static u16
+readword(unsigned long base_addr, int portno)
{
- outw(portno, dev->base_addr + ADD_PORT);
- return inw(dev->base_addr + DATA_PORT);
+ return __raw_readw(base_addr + (portno << 1));
}
static void
-writereg(struct net_device *dev, int portno, int value)
+writeword(unsigned long base_addr, int portno, u16 value)
{
- outw(portno, dev->base_addr + ADD_PORT);
- outw(value, dev->base_addr + DATA_PORT);
+ __raw_writew(value, base_addr + (portno << 1));
+}
+#elif defined(CONFIG_ARCH_IXDP2X01)
+static u16
+readword(unsigned long base_addr, int portno)
+{
+ return __raw_readl(base_addr + (portno << 1));
}
-static int
-readword(struct net_device *dev, int portno)
+static void
+writeword(unsigned long base_addr, int portno, u16 value)
+{
+ __raw_writel(value, base_addr + (portno << 1));
+}
+#elif defined(CONFIG_ARCH_PNX010X)
+static u16
+readword(unsigned long base_addr, int portno)
+{
+ return inw(base_addr + (portno << 1));
+}
+
+static void
+writeword(unsigned long base_addr, int portno, u16 value)
+{
+ outw(value, base_addr + (portno << 1));
+}
+#else
+static u16
+readword(unsigned long base_addr, int portno)
+{
+ return inw(base_addr + portno);
+}
+
+static void
+writeword(unsigned long base_addr, int portno, u16 value)
+{
+ outw(value, base_addr + portno);
+}
+#endif
+
+static void
+readwords(unsigned long base_addr, int portno, void *buf, int length)
+{
+ u8 *buf8 = (u8 *)buf;
+
+ do {
+ u16 tmp16;
+
+ tmp16 = readword(base_addr, portno);
+ *buf8++ = (u8)tmp16;
+ *buf8++ = (u8)(tmp16 >> 8);
+ } while (--length);
+}
+
+static void
+writewords(unsigned long base_addr, int portno, void *buf, int length)
+{
+ u8 *buf8 = (u8 *)buf;
+
+ do {
+ u16 tmp16;
+
+ tmp16 = *buf8++;
+ tmp16 |= (*buf8++) << 8;
+ writeword(base_addr, portno, tmp16);
+ } while (--length);
+}
+
+static u16
+readreg(struct net_device *dev, u16 regno)
{
- return inw(dev->base_addr + portno);
+ writeword(dev->base_addr, ADD_PORT, regno);
+ return readword(dev->base_addr, DATA_PORT);
}
static void
-writeword(struct net_device *dev, int portno, int value)
+writereg(struct net_device *dev, u16 regno, u16 value)
{
- outw(value, dev->base_addr + portno);
+ writeword(dev->base_addr, ADD_PORT, regno);
+ writeword(dev->base_addr, DATA_PORT, value);
}
static int __init
return -1;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void net_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ net_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
/* This is the real probe routine. Linux has a history of friendly device
probes on the ISA bus. A good device probes avoids doing writes, and
verifies that the correct device exists and functions.
struct net_local *lp = netdev_priv(dev);
static unsigned version_printed;
int i;
+ int tmp;
unsigned rev_type = 0;
int eeprom_buff[CHKSUM_LEN];
int retval;
#endif
}
+#ifdef CONFIG_ARCH_PNX010X
+ initialize_ebi();
+
+ /* Map GPIO registers for the pins connected to the CS8900a. */
+ if (map_cirrus_gpio() < 0)
+ return -ENODEV;
+
+ reset_cirrus();
+
+ /* Map event-router registers. */
+ if (map_event_router() < 0)
+ return -ENODEV;
+
+ enable_cirrus_irq();
+
+ unmap_cirrus_gpio();
+ unmap_event_router();
+
+ dev->base_addr = ioaddr;
+
+ for (i = 0 ; i < 3 ; i++)
+ readreg(dev, 0);
+#endif
+
/* Grab the region so we can find another board if autoIRQ fails. */
/* WTF is going on here? */
- if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, dev->name)) {
+ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
- dev->name, ioaddr, NETCARD_IO_EXTENT);
+ DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
retval = -EBUSY;
goto out1;
}
#ifdef CONFIG_SH_HICOSH4
/* truely reset the chip */
- outw(0x0114, ioaddr + ADD_PORT);
- outw(0x0040, ioaddr + DATA_PORT);
+ writeword(ioaddr, ADD_PORT, 0x0114);
+ writeword(ioaddr, DATA_PORT, 0x0040);
#endif
/* if they give us an odd I/O address, then do ONE write to
if (net_debug > 1)
printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
if ((ioaddr & 2) != 2)
- if ((inw((ioaddr & ~3)+ ADD_PORT) & ADD_MASK) != ADD_SIG) {
+ if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) {
printk(KERN_ERR "%s: bad signature 0x%x\n",
- dev->name, inw((ioaddr & ~3)+ ADD_PORT));
+ dev->name, readword(ioaddr & ~3, ADD_PORT));
retval = -ENODEV;
goto out2;
}
- ioaddr &= ~3;
- outw(PP_ChipID, ioaddr + ADD_PORT);
}
-printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
+ printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n",
+ ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT));
+
+ ioaddr &= ~3;
+ writeword(ioaddr, ADD_PORT, PP_ChipID);
- if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) {
- printk(KERN_ERR "%s: incorrect signature 0x%x\n",
- dev->name, inw(ioaddr + DATA_PORT));
+ tmp = readword(ioaddr, DATA_PORT);
+ if (tmp != CHIP_EISA_ID_SIG) {
+ printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!="
+ CHIP_EISA_ID_SIG_STR "\n",
+ dev->name, ioaddr, DATA_PORT, tmp);
retval = -ENODEV;
goto out2;
}
} else {
i = lp->isa_config & INT_NO_MASK;
if (lp->chip_type == CS8900) {
+#if defined(CONFIG_MACH_IXDP2351) || defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX010X)
+ i = cs8900_irq_map[0];
+#else
/* Translate the IRQ using the IRQ mapping table. */
if (i >= sizeof(cs8900_irq_map)/sizeof(cs8900_irq_map[0]))
printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8);
}
+#endif
}
if (!dev->irq)
dev->irq = i;
dev->get_stats = net_get_stats;
dev->set_multicast_list = set_multicast_list;
dev->set_mac_address = set_mac_address;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = net_poll_controller;
+#endif
printk("\n");
if (net_debug)
printk("cs89x0_probe1() successful\n");
+
+ retval = register_netdev(dev);
+ if (retval)
+ goto out3;
return 0;
+out3:
+ writeword(dev->base_addr, ADD_PORT, PP_ChipID);
out2:
release_region(ioaddr & ~3, NETCARD_IO_EXTENT);
out1:
void __init reset_chip(struct net_device *dev)
{
+#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
struct net_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
+#endif
int reset_start_time;
writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
/* wait 30 ms */
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(30*HZ/1000);
+ msleep(30);
+#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
if (lp->chip_type != CS8900) {
/* Hardware problem requires PNP registers to be reconfigured after a reset */
- outw(PP_CS8920_ISAINT, ioaddr + ADD_PORT);
+ writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT);
outb(dev->irq, ioaddr + DATA_PORT);
outb(0, ioaddr + DATA_PORT + 1);
- outw(PP_CS8920_ISAMemB, ioaddr + ADD_PORT);
+ writeword(ioaddr, ADD_PORT, PP_CS8920_ISAMemB);
outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT);
outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1);
}
+#endif /* IXDP2x01 */
+
/* Wait until the chip is reset */
reset_start_time = jiffies;
while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
memcpy(test_packet, dev->dev_addr, ETH_ALEN);
memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN);
- writeword(dev, TX_CMD_PORT, TX_AFTER_ALL);
- writeword(dev, TX_LEN_PORT, ETH_ZLEN);
+ writeword(dev->base_addr, TX_CMD_PORT, TX_AFTER_ALL);
+ writeword(dev->base_addr, TX_LEN_PORT, ETH_ZLEN);
/* Test to see if the chip has allocated memory for the packet */
while (jiffies - timenow < 5)
return 0; /* this shouldn't happen */
/* Write the contents of the packet */
- outsw(dev->base_addr + TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1);
+ writewords(dev->base_addr, TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1);
if (net_debug > 1) printk("Sending test packet ");
/* wait a couple of jiffies for packet to be received */
int i;
int ret;
-#ifndef CONFIG_SH_HICOSH4 /* uses irq#1, so this won't work */
+#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX010X) /* uses irq#1, so this won't work */
if (dev->irq < 2) {
/* Allow interrupts to be generated by the chip */
/* Cirrus' release had this: */
else
#endif
{
+#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
ret = -EAGAIN;
goto bad_out;
}
+#endif
/* FIXME: Cirrus' release had this: */
writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
/* And 2.3.47 had this: */
case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
}
+#ifdef CONFIG_ARCH_PNX010X
+ result = A_CNF_10B_T;
+#endif
if (!result) {
printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
release_irq:
netif_stop_queue(dev);
/* initiate a transmit sequence */
- writeword(dev, TX_CMD_PORT, lp->send_cmd);
- writeword(dev, TX_LEN_PORT, skb->len);
+ writeword(dev->base_addr, TX_CMD_PORT, lp->send_cmd);
+ writeword(dev->base_addr, TX_LEN_PORT, skb->len);
/* Test to see if the chip has allocated memory for the packet */
if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
return 1;
}
/* Write the contents of the packet */
- outsw(dev->base_addr + TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
+ writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
spin_unlock_irq(&lp->lock);
+ lp->stats.tx_bytes += skb->len;
dev->trans_start = jiffies;
dev_kfree_skb (skb);
course, if you're on a slow machine, and packets are arriving
faster than you can read them off, you're screwed. Hasta la
vista, baby! */
- while ((status = readword(dev, ISQ_PORT))) {
+ while ((status = readword(dev->base_addr, ISQ_PORT))) {
if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
handled = 1;
switch(status & ISQ_EVENT_MASK) {
int status, length;
int ioaddr = dev->base_addr;
- status = inw(ioaddr + RX_FRAME_PORT);
- length = inw(ioaddr + RX_FRAME_PORT);
+ status = readword(ioaddr, RX_FRAME_PORT);
+ length = readword(ioaddr, RX_FRAME_PORT);
if ((status & RX_OK) == 0) {
count_rx_errors(status, lp);
skb_reserve(skb, 2); /* longword align L3 header */
skb->dev = dev;
- insw(ioaddr + RX_FRAME_PORT, skb_put(skb, length), length >> 1);
+ readwords(ioaddr, RX_FRAME_PORT, skb_put(skb, length), length >> 1);
if (length & 1)
- skb->data[length-1] = inw(ioaddr + RX_FRAME_PORT);
+ skb->data[length-1] = readword(ioaddr, RX_FRAME_PORT);
if (net_debug > 3) {
printk( "%s: received %d byte packet of type %x\n",
{
if (lp->dma_buff) {
free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024));
- lp->dma_buff = 0;
+ lp->dma_buff = NULL;
}
}
#endif
static int
net_close(struct net_device *dev)
{
+#if ALLOW_DMA
struct net_local *lp = netdev_priv(dev);
+#endif
netif_stop_queue(dev);
static int dma;
static int dmasize=16; /* or 64 */
-MODULE_PARM(io, "i");
-MODULE_PARM(irq, "i");
-MODULE_PARM(debug, "i");
-MODULE_PARM(media, "c8");
-MODULE_PARM(duplex, "i");
-MODULE_PARM(dma , "i");
-MODULE_PARM(dmasize , "i");
-MODULE_PARM(use_dma , "i");
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(debug, int, 0);
+module_param_string(media, media, sizeof(media), 0);
+module_param(duplex, int, 0);
+module_param(dma , int, 0);
+module_param(dmasize , int, 0);
+module_param(use_dma , int, 0);
MODULE_PARM_DESC(io, "cs89x0 I/O base address");
MODULE_PARM_DESC(irq, "cs89x0 IRQ number");
#if DEBUGGING
if (ret)
goto out;
- if (register_netdev(dev) != 0) {
- printk(KERN_ERR "cs89x0.c: No card found at 0x%x\n", io);
- ret = -ENXIO;
- outw(PP_ChipID, dev->base_addr + ADD_PORT);
- release_region(dev->base_addr, NETCARD_IO_EXTENT);
- goto out;
- }
dev_cs89x0 = dev;
return 0;
out:
cleanup_module(void)
{
unregister_netdev(dev_cs89x0);
- outw(PP_ChipID, dev_cs89x0->base_addr + ADD_PORT);
+ writeword(dev_cs89x0->base_addr, ADD_PORT, PP_ChipID);
release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
free_netdev(dev_cs89x0);
}