* Author: Andy Fleming
* Maintainer: Kumar Gala
*
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* The driver then cleans up the buffer.
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
static struct net_device_stats *gfar_get_stats(struct net_device *dev);
static int gfar_set_mac_address(struct net_device *dev);
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
-static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t gfar_error(int irq, void *dev_id);
+static irqreturn_t gfar_transmit(int irq, void *dev_id);
+static irqreturn_t gfar_interrupt(int irq, void *dev_id);
static void adjust_link(struct net_device *dev);
static void init_registers(struct net_device *dev);
static int init_phy(struct net_device *dev);
#ifdef CONFIG_GFAR_NAPI
static int gfar_poll(struct net_device *dev, int *budget);
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void gfar_netpoll(struct net_device *dev);
+#endif
int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
static void gfar_vlan_rx_register(struct net_device *netdev,
static void gfar_clear_exact_match(struct net_device *dev);
static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
-extern struct ethtool_ops gfar_ethtool_ops;
+extern const struct ethtool_ops gfar_ethtool_ops;
MODULE_AUTHOR("Freescale Semiconductor, Inc");
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
#ifdef CONFIG_GFAR_NAPI
dev->poll = gfar_poll;
dev->weight = GFAR_DEV_WEIGHT;
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = gfar_netpoll;
#endif
dev->stop = gfar_close;
dev->get_stats = gfar_get_stats;
}
+/* Reads the controller's registers to determine what interface
+ * connects it to the PHY.
+ */
+static phy_interface_t gfar_get_interface(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ u32 ecntrl = gfar_read(&priv->regs->ecntrl);
+
+ if (ecntrl & ECNTRL_SGMII_MODE)
+ return PHY_INTERFACE_MODE_SGMII;
+
+ if (ecntrl & ECNTRL_TBI_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MODE)
+ return PHY_INTERFACE_MODE_RTBI;
+ else
+ return PHY_INTERFACE_MODE_TBI;
+ }
+
+ if (ecntrl & ECNTRL_REDUCED_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MII_MODE)
+ return PHY_INTERFACE_MODE_RMII;
+ else
+ return PHY_INTERFACE_MODE_RGMII;
+ }
+
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
+ return PHY_INTERFACE_MODE_GMII;
+
+ return PHY_INTERFACE_MODE_MII;
+}
+
+
/* Initializes driver's PHY state, and attaches to the PHY.
* Returns 0 on success.
*/
SUPPORTED_1000baseT_Full : 0;
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
+ phy_interface_t interface;
priv->oldlink = 0;
priv->oldspeed = 0;
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
- phydev = phy_connect(dev, phy_id, &adjust_link, 0);
+ interface = gfar_get_interface(dev);
+
+ phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
/* Set up checksumming */
if (likely((dev->features & NETIF_F_IP_CSUM)
- && (CHECKSUM_HW == skb->ip_summed))) {
+ && (CHECKSUM_PARTIAL == skb->ip_summed))) {
fcb = gfar_add_fcb(skb, txbdp);
status |= TXBD_TOE;
gfar_tx_checksum(skb, fcb);
tempval |= TCTRL_VLINS;
gfar_write(&priv->regs->tctrl, tempval);
-
+
/* Enable VLAN tag extraction */
tempval = gfar_read(&priv->regs->rctrl);
tempval |= RCTRL_VLEX;
}
/* Interrupt Handler for Transmit complete */
-static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t gfar_transmit(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct gfar_private *priv = netdev_priv(dev);
}
}
-irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t gfar_receive(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct gfar_private *priv = netdev_priv(dev);
}
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void gfar_netpoll(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+
+ /* If the device has multiple interrupts, run tx/rx */
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
+ disable_irq(priv->interruptTransmit);
+ disable_irq(priv->interruptReceive);
+ disable_irq(priv->interruptError);
+ gfar_interrupt(priv->interruptTransmit, dev);
+ enable_irq(priv->interruptError);
+ enable_irq(priv->interruptReceive);
+ enable_irq(priv->interruptTransmit);
+ } else {
+ disable_irq(priv->interruptTransmit);
+ gfar_interrupt(priv->interruptTransmit, dev);
+ enable_irq(priv->interruptTransmit);
+ }
+}
+#endif
+
/* The interrupt handler for devices with one interrupt */
-static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t gfar_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct gfar_private *priv = netdev_priv(dev);
/* Check for reception */
if ((events & IEVENT_RXF0) || (events & IEVENT_RXB0))
- gfar_receive(irq, dev_id, regs);
+ gfar_receive(irq, dev_id);
/* Check for transmit completion */
if ((events & IEVENT_TXF) || (events & IEVENT_TXB))
- gfar_transmit(irq, dev_id, regs);
+ gfar_transmit(irq, dev_id);
/* Update error statistics */
if (events & IEVENT_TXE) {
priv->stats.rx_errors++;
priv->extra_stats.rx_bsy++;
- gfar_receive(irq, dev_id, regs);
+ gfar_receive(irq, dev_id);
#ifndef CONFIG_GFAR_NAPI
/* Clear the halt bit in RSTAT */
u32 tempval;
if(dev->flags & IFF_PROMISC) {
- if (netif_msg_drv(priv))
- printk(KERN_INFO "%s: Entering promiscuous mode.\n",
- dev->name);
/* Set RCTRL to PROM */
tempval = gfar_read(®s->rctrl);
tempval |= RCTRL_PROM;
tempval &= ~(RCTRL_PROM);
gfar_write(®s->rctrl, tempval);
}
-
+
if(dev->flags & IFF_ALLMULTI) {
/* Set the hash to rx all multicast frames */
gfar_write(®s->igaddr0, 0xffffffff);
}
/* GFAR error interrupt handler */
-static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t gfar_error(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct gfar_private *priv = netdev_priv(dev);
priv->stats.rx_errors++;
priv->extra_stats.rx_bsy++;
- gfar_receive(irq, dev_id, regs);
+ gfar_receive(irq, dev_id);
#ifndef CONFIG_GFAR_NAPI
/* Clear the halt bit in RSTAT */
if (err)
gfar_mdio_exit();
-
+
return err;
}
git://git.onelab.eu / linux-2.6.git / blobdiff