--- /dev/null
+/*
+ * drivers/net/gianfar_ethtool.c
+ *
+ * Gianfar Ethernet Driver
+ * Ethtool support for Gianfar Enet
+ * Based on e1000 ethtool support
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This software may be used and distributed according to
+ * the terms of the GNU Public License, Version 2, incorporated herein
+ * by reference.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/crc32.h>
+#include <asm/types.h>
+#include <asm/uaccess.h>
+#include <linux/ethtool.h>
+
+#include "gianfar.h"
+
+#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+extern int startup_gfar(struct net_device *dev);
+extern void stop_gfar(struct net_device *dev);
+extern void gfar_receive(int irq, void *dev_id, struct pt_regs *regs);
+
+void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
+ u64 * buf);
+void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf);
+int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals);
+int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals);
+void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals);
+int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals);
+void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo);
+
+static char stat_gstrings[][ETH_GSTRING_LEN] = {
+ "RX Dropped by Kernel",
+ "RX Large Frame Errors",
+ "RX Short Frame Errors",
+ "RX Non-Octet Errors",
+ "RX CRC Errors",
+ "RX Overrun Errors",
+ "RX Busy Errors",
+ "RX Babbling Errors",
+ "RX Truncated Frames",
+ "Ethernet Bus Error",
+ "TX Babbling Errors",
+ "TX Underrun Errors",
+ "RX SKB Missing Errors",
+ "TX Timeout Errors",
+ "tx&rx 64B frames",
+ "tx&rx 65-127B frames",
+ "tx&rx 128-255B frames",
+ "tx&rx 256-511B frames",
+ "tx&rx 512-1023B frames",
+ "tx&rx 1024-1518B frames",
+ "tx&rx 1519-1522B Good VLAN",
+ "RX bytes",
+ "RX Packets",
+ "RX FCS Errors",
+ "Receive Multicast Packet",
+ "Receive Broadcast Packet",
+ "RX Control Frame Packets",
+ "RX Pause Frame Packets",
+ "RX Unknown OP Code",
+ "RX Alignment Error",
+ "RX Frame Length Error",
+ "RX Code Error",
+ "RX Carrier Sense Error",
+ "RX Undersize Packets",
+ "RX Oversize Packets",
+ "RX Fragmented Frames",
+ "RX Jabber Frames",
+ "RX Dropped Frames",
+ "TX Byte Counter",
+ "TX Packets",
+ "TX Multicast Packets",
+ "TX Broadcast Packets",
+ "TX Pause Control Frames",
+ "TX Deferral Packets",
+ "TX Excessive Deferral Packets",
+ "TX Single Collision Packets",
+ "TX Multiple Collision Packets",
+ "TX Late Collision Packets",
+ "TX Excessive Collision Packets",
+ "TX Total Collision",
+ "RESERVED",
+ "TX Dropped Frames",
+ "TX Jabber Frames",
+ "TX FCS Errors",
+ "TX Control Frames",
+ "TX Oversize Frames",
+ "TX Undersize Frames",
+ "TX Fragmented Frames",
+};
+
+/* Fill in an array of 64-bit statistics from various sources.
+ * This array will be appended to the end of the ethtool_stats
+ * structure, and returned to user space
+ */
+void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf)
+{
+ int i;
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+ u32 *rmon = (u32 *) & priv->regs->rmon;
+ u64 *extra = (u64 *) & priv->extra_stats;
+ struct gfar_stats *stats = (struct gfar_stats *) buf;
+
+ for (i = 0; i < GFAR_RMON_LEN; i++) {
+ stats->rmon[i] = (u64) (rmon[i]);
+ }
+
+ for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) {
+ stats->extra[i] = extra[i];
+ }
+}
+
+/* Returns the number of stats (and their corresponding strings) */
+int gfar_stats_count(struct net_device *dev)
+{
+ return GFAR_STATS_LEN;
+}
+
+void gfar_gstrings_normon(struct net_device *dev, u32 stringset, u8 * buf)
+{
+ memcpy(buf, stat_gstrings, GFAR_EXTRA_STATS_LEN * ETH_GSTRING_LEN);
+}
+
+void gfar_fill_stats_normon(struct net_device *dev,
+ struct ethtool_stats *dummy, u64 * buf)
+{
+ int i;
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+ u64 *extra = (u64 *) & priv->extra_stats;
+
+ for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) {
+ buf[i] = extra[i];
+ }
+}
+
+
+int gfar_stats_count_normon(struct net_device *dev)
+{
+ return GFAR_EXTRA_STATS_LEN;
+}
+/* Fills in the drvinfo structure with some basic info */
+void gfar_gdrvinfo(struct net_device *dev, struct
+ ethtool_drvinfo *drvinfo)
+{
+ strncpy(drvinfo->driver, gfar_driver_name, GFAR_INFOSTR_LEN);
+ strncpy(drvinfo->version, gfar_driver_version, GFAR_INFOSTR_LEN);
+ strncpy(drvinfo->fw_version, "N/A", GFAR_INFOSTR_LEN);
+ strncpy(drvinfo->bus_info, "N/A", GFAR_INFOSTR_LEN);
+ drvinfo->n_stats = GFAR_STATS_LEN;
+ drvinfo->testinfo_len = 0;
+ drvinfo->regdump_len = 0;
+ drvinfo->eedump_len = 0;
+}
+
+/* Return the current settings in the ethtool_cmd structure */
+int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+ uint gigabit_support =
+ priv->einfo->flags & GFAR_HAS_GIGABIT ? SUPPORTED_1000baseT_Full : 0;
+ uint gigabit_advert =
+ priv->einfo->flags & GFAR_HAS_GIGABIT ? ADVERTISED_1000baseT_Full: 0;
+
+ cmd->supported = (SUPPORTED_10baseT_Half
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | gigabit_support | SUPPORTED_Autoneg);
+
+ /* For now, we always advertise everything */
+ cmd->advertising = (ADVERTISED_10baseT_Half
+ | ADVERTISED_100baseT_Half
+ | ADVERTISED_100baseT_Full
+ | gigabit_advert | ADVERTISED_Autoneg);
+
+ cmd->speed = priv->speed;
+ cmd->duplex = priv->duplexity;
+ cmd->port = PORT_MII;
+ cmd->phy_address = priv->einfo->phyid;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->autoneg = AUTONEG_ENABLE;
+ cmd->maxtxpkt = priv->txcount;
+ cmd->maxrxpkt = priv->rxcount;
+
+ return 0;
+}
+
+/* Return the length of the register structure */
+int gfar_reglen(struct net_device *dev)
+{
+ return sizeof (struct gfar);
+}
+
+/* Return a dump of the GFAR register space */
+void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
+{
+ int i;
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+ u32 *theregs = (u32 *) priv->regs;
+ u32 *buf = (u32 *) regbuf;
+
+ for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++)
+ buf[i] = theregs[i];
+}
+
+/* Return the link state 1 is up, 0 is down */
+u32 gfar_get_link(struct net_device *dev)
+{
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+ return (u32) priv->link;
+}
+
+/* Fill in a buffer with the strings which correspond to the
+ * stats */
+void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf)
+{
+ memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN);
+}
+
+/* Convert microseconds to ethernet clock ticks, which changes
+ * depending on what speed the controller is running at */
+static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int usecs)
+{
+ unsigned int count;
+
+ /* The timer is different, depending on the interface speed */
+ switch (priv->speed) {
+ case 1000:
+ count = GFAR_GBIT_TIME;
+ break;
+ case 100:
+ count = GFAR_100_TIME;
+ break;
+ case 10:
+ default:
+ count = GFAR_10_TIME;
+ break;
+ }
+
+ /* Make sure we return a number greater than 0
+ * if usecs > 0 */
+ return ((usecs * 1000 + count - 1) / count);
+}
+
+/* Convert ethernet clock ticks to microseconds */
+static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int ticks)
+{
+ unsigned int count;
+
+ /* The timer is different, depending on the interface speed */
+ switch (priv->speed) {
+ case 1000:
+ count = GFAR_GBIT_TIME;
+ break;
+ case 100:
+ count = GFAR_100_TIME;
+ break;
+ case 10:
+ default:
+ count = GFAR_10_TIME;
+ break;
+ }
+
+ /* Make sure we return a number greater than 0 */
+ /* if ticks is > 0 */
+ return ((ticks * count) / 1000);
+}
+
+/* Get the coalescing parameters, and put them in the cvals
+ * structure. */
+int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
+{
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+
+ cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime);
+ cvals->rx_max_coalesced_frames = priv->rxcount;
+
+ cvals->tx_coalesce_usecs = gfar_ticks2usecs(priv, priv->txtime);
+ cvals->tx_max_coalesced_frames = priv->txcount;
+
+ cvals->use_adaptive_rx_coalesce = 0;
+ cvals->use_adaptive_tx_coalesce = 0;
+
+ cvals->pkt_rate_low = 0;
+ cvals->rx_coalesce_usecs_low = 0;
+ cvals->rx_max_coalesced_frames_low = 0;
+ cvals->tx_coalesce_usecs_low = 0;
+ cvals->tx_max_coalesced_frames_low = 0;
+
+ /* When the packet rate is below pkt_rate_high but above
+ * pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+
+ /* When the packet rate is (measured in packets per second)
+ * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+ * used.
+ */
+ cvals->pkt_rate_high = 0;
+ cvals->rx_coalesce_usecs_high = 0;
+ cvals->rx_max_coalesced_frames_high = 0;
+ cvals->tx_coalesce_usecs_high = 0;
+ cvals->tx_max_coalesced_frames_high = 0;
+
+ /* How often to do adaptive coalescing packet rate sampling,
+ * measured in seconds. Must not be zero.
+ */
+ cvals->rate_sample_interval = 0;
+
+ return 0;
+}
+
+/* Change the coalescing values.
+ * Both cvals->*_usecs and cvals->*_frames have to be > 0
+ * in order for coalescing to be active
+ */
+int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
+{
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+
+ /* Set up rx coalescing */
+ if ((cvals->rx_coalesce_usecs == 0) ||
+ (cvals->rx_max_coalesced_frames == 0))
+ priv->rxcoalescing = 0;
+ else
+ priv->rxcoalescing = 1;
+
+ priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs);
+ priv->rxcount = cvals->rx_max_coalesced_frames;
+
+ /* Set up tx coalescing */
+ if ((cvals->tx_coalesce_usecs == 0) ||
+ (cvals->tx_max_coalesced_frames == 0))
+ priv->txcoalescing = 0;
+ else
+ priv->txcoalescing = 1;
+
+ priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs);
+ priv->txcount = cvals->tx_max_coalesced_frames;
+
+ if (priv->rxcoalescing)
+ gfar_write(&priv->regs->rxic,
+ mk_ic_value(priv->rxcount, priv->rxtime));
+ else
+ gfar_write(&priv->regs->rxic, 0);
+
+ if (priv->txcoalescing)
+ gfar_write(&priv->regs->txic,
+ mk_ic_value(priv->txcount, priv->txtime));
+ else
+ gfar_write(&priv->regs->txic, 0);
+
+ return 0;
+}
+
+/* Fills in rvals with the current ring parameters. Currently,
+ * rx, rx_mini, and rx_jumbo rings are the same size, as mini and
+ * jumbo are ignored by the driver */
+void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
+{
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+
+ rvals->rx_max_pending = GFAR_RX_MAX_RING_SIZE;
+ rvals->rx_mini_max_pending = GFAR_RX_MAX_RING_SIZE;
+ rvals->rx_jumbo_max_pending = GFAR_RX_MAX_RING_SIZE;
+ rvals->tx_max_pending = GFAR_TX_MAX_RING_SIZE;
+
+ /* Values changeable by the user. The valid values are
+ * in the range 1 to the "*_max_pending" counterpart above.
+ */
+ rvals->rx_pending = priv->rx_ring_size;
+ rvals->rx_mini_pending = priv->rx_ring_size;
+ rvals->rx_jumbo_pending = priv->rx_ring_size;
+ rvals->tx_pending = priv->tx_ring_size;
+}
+
+/* Change the current ring parameters, stopping the controller if
+ * necessary so that we don't mess things up while we're in
+ * motion. We wait for the ring to be clean before reallocating
+ * the rings. */
+int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
+{
+ u32 tempval;
+ struct gfar_private *priv = (struct gfar_private *) dev->priv;
+ int err = 0;
+
+ if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE)
+ return -EINVAL;
+
+ if (!is_power_of_2(rvals->rx_pending)) {
+ printk("%s: Ring sizes must be a power of 2\n",
+ dev->name);
+ return -EINVAL;
+ }
+
+ if (rvals->tx_pending > GFAR_TX_MAX_RING_SIZE)
+ return -EINVAL;
+
+ if (!is_power_of_2(rvals->tx_pending)) {
+ printk("%s: Ring sizes must be a power of 2\n",
+ dev->name);
+ return -EINVAL;
+ }
+
+ /* Stop the controller so we don't rx any more frames */
+ /* But first, make sure we clear the bits */
+ tempval = gfar_read(&priv->regs->dmactrl);
+ tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
+ gfar_write(&priv->regs->dmactrl, tempval);
+
+ tempval = gfar_read(&priv->regs->dmactrl);
+ tempval |= (DMACTRL_GRS | DMACTRL_GTS);
+ gfar_write(&priv->regs->dmactrl, tempval);
+
+ while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC)))
+ cpu_relax();
+
+ /* Note that rx is not clean right now */
+ priv->rxclean = 0;
+
+ if (dev->flags & IFF_UP) {
+ /* Tell the driver to process the rest of the frames */
+ gfar_receive(0, (void *) dev, NULL);
+
+ /* Now wait for it to be done */
+ wait_event_interruptible(priv->rxcleanupq, priv->rxclean);
+
+ /* Ok, all packets have been handled. Now we bring it down,
+ * change the ring size, and bring it up */
+
+ stop_gfar(dev);
+ }
+
+ priv->rx_ring_size = rvals->rx_pending;
+ priv->tx_ring_size = rvals->tx_pending;
+
+ if (dev->flags & IFF_UP)
+ err = startup_gfar(dev);
+
+ return err;
+}
+
+struct ethtool_ops gfar_ethtool_ops = {
+ .get_settings = gfar_gsettings,
+ .get_drvinfo = gfar_gdrvinfo,
+ .get_regs_len = gfar_reglen,
+ .get_regs = gfar_get_regs,
+ .get_link = gfar_get_link,
+ .get_coalesce = gfar_gcoalesce,
+ .set_coalesce = gfar_scoalesce,
+ .get_ringparam = gfar_gringparam,
+ .set_ringparam = gfar_sringparam,
+ .get_strings = gfar_gstrings,
+ .get_stats_count = gfar_stats_count,
+ .get_ethtool_stats = gfar_fill_stats,
+};
git://git.onelab.eu / linux-2.6.git / blobdiff