--- /dev/null
+/*
+ * drivers/net/gianfar_mii.c
+ *
+ * Gianfar Ethernet Driver -- MIIM bus implementation
+ * Provides Bus interface for MIIM regs
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala
+ *
+ * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <asm/ocp.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "gianfar.h"
+#include "gianfar_mii.h"
+
+/* Write value to the PHY at mii_id at register regnum,
+ * on the bus, waiting until the write is done before returning.
+ * All PHY configuration is done through the TSEC1 MIIM regs */
+int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
+
+ /* Set the PHY address and the register address we want to write */
+ gfar_write(®s->miimadd, (mii_id << 8) | regnum);
+
+ /* Write out the value we want */
+ gfar_write(®s->miimcon, value);
+
+ /* Wait for the transaction to finish */
+ while (gfar_read(®s->miimind) & MIIMIND_BUSY)
+ cpu_relax();
+
+ return 0;
+}
+
+/* Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value. Clears miimcom first. All PHY
+ * configuration has to be done through the TSEC1 MIIM regs */
+int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
+ u16 value;
+
+ /* Set the PHY address and the register address we want to read */
+ gfar_write(®s->miimadd, (mii_id << 8) | regnum);
+
+ /* Clear miimcom, and then initiate a read */
+ gfar_write(®s->miimcom, 0);
+ gfar_write(®s->miimcom, MII_READ_COMMAND);
+
+ /* Wait for the transaction to finish */
+ while (gfar_read(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+ cpu_relax();
+
+ /* Grab the value of the register from miimstat */
+ value = gfar_read(®s->miimstat);
+
+ return value;
+}
+
+
+/* Reset the MIIM registers, and wait for the bus to free */
+int gfar_mdio_reset(struct mii_bus *bus)
+{
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
+ unsigned int timeout = PHY_INIT_TIMEOUT;
+
+ spin_lock_bh(&bus->mdio_lock);
+
+ /* Reset the management interface */
+ gfar_write(®s->miimcfg, MIIMCFG_RESET);
+
+ /* Setup the MII Mgmt clock speed */
+ gfar_write(®s->miimcfg, MIIMCFG_INIT_VALUE);
+
+ /* Wait until the bus is free */
+ while ((gfar_read(®s->miimind) & MIIMIND_BUSY) &&
+ timeout--)
+ cpu_relax();
+
+ spin_unlock_bh(&bus->mdio_lock);
+
+ if(timeout <= 0) {
+ printk(KERN_ERR "%s: The MII Bus is stuck!\n",
+ bus->name);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+
+int gfar_mdio_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gianfar_mdio_data *pdata;
+ struct gfar_mii __iomem *regs;
+ struct mii_bus *new_bus;
+ struct resource *r;
+ int err = 0;
+
+ if (NULL == dev)
+ return -EINVAL;
+
+ new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+ if (NULL == new_bus)
+ return -ENOMEM;
+
+ new_bus->name = "Gianfar MII Bus",
+ new_bus->read = &gfar_mdio_read,
+ new_bus->write = &gfar_mdio_write,
+ new_bus->reset = &gfar_mdio_reset,
+ new_bus->id = pdev->id;
+
+ pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
+
+ if (NULL == pdata) {
+ printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
+ return -ENODEV;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ /* Set the PHY base address */
+ regs = ioremap(r->start, sizeof (struct gfar_mii));
+
+ if (NULL == regs) {
+ err = -ENOMEM;
+ goto reg_map_fail;
+ }
+
+ new_bus->priv = (void __force *)regs;
+
+ new_bus->irq = pdata->irq;
+
+ new_bus->dev = dev;
+ dev_set_drvdata(dev, new_bus);
+
+ err = mdiobus_register(new_bus);
+
+ if (0 != err) {
+ printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
+ new_bus->name);
+ goto bus_register_fail;
+ }
+
+ return 0;
+
+bus_register_fail:
+ iounmap(regs);
+reg_map_fail:
+ kfree(new_bus);
+
+ return err;
+}
+
+
+int gfar_mdio_remove(struct device *dev)
+{
+ struct mii_bus *bus = dev_get_drvdata(dev);
+
+ mdiobus_unregister(bus);
+
+ dev_set_drvdata(dev, NULL);
+
+ iounmap((void __iomem *)bus->priv);
+ bus->priv = NULL;
+ kfree(bus);
+
+ return 0;
+}
+
+static struct device_driver gianfar_mdio_driver = {
+ .name = "fsl-gianfar_mdio",
+ .bus = &platform_bus_type,
+ .probe = gfar_mdio_probe,
+ .remove = gfar_mdio_remove,
+};
+
+int __init gfar_mdio_init(void)
+{
+ return driver_register(&gianfar_mdio_driver);
+}
+
+void __exit gfar_mdio_exit(void)
+{
+ driver_unregister(&gianfar_mdio_driver);
+}
git://git.onelab.eu / linux-2.6.git / blobdiff