/*****************************************************************************/
-#include <linux/config.h>
+#include <linux/crc-ccitt.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/workqueue.h>
#include <linux/fs.h>
#include <linux/parport.h>
-#include <linux/smp_lock.h>
-#include <asm/uaccess.h>
#include <linux/if_arp.h>
-#include <linux/kmod.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
-#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
-/* prototypes for ax25_encapsulate and ax25_rebuild_header */
+#include <linux/jiffies.h>
#include <net/ax25.h>
-#endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */
-#include <linux/crc-ccitt.h>
+#include <asm/uaccess.h>
/* --------------------------------------------------------------------- */
int magic;
struct pardevice *pdev;
+ struct net_device *dev;
unsigned int work_running;
- struct work_struct run_work;
+ struct delayed_work run_work;
unsigned int modem;
unsigned int bitrate;
unsigned char stat;
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
- if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+ if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
/* ---------------------------------------------------------------------- */
-static void epp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static void epp_interrupt(int irq, void *dev_id)
{
}
#define GETTICK(x)
#endif /* __i386__ */
-static void epp_bh(struct net_device *dev)
+static void epp_bh(struct work_struct *work)
{
+ struct net_device *dev;
struct baycom_state *bc;
struct parport *pp;
unsigned char stat;
unsigned char tmp[2];
unsigned int time1 = 0, time2 = 0, time3 = 0;
int cnt, cnt2;
-
- bc = netdev_priv(dev);
+
+ bc = container_of(work, struct baycom_state, run_work.work);
+ dev = bc->dev;
if (!bc->work_running)
return;
baycom_int_freq(bc);
return -EBUSY;
}
dev->irq = /*pp->irq*/ 0;
- INIT_WORK(&bc->run_work, (void *)(void *)epp_bh, dev);
+ INIT_DELAYED_WORK(&bc->run_work, epp_bh);
bc->work_running = 1;
bc->modem = EPP_CONVENTIONAL;
if (eppconfig(bc))
/* autoprobe baud rate */
tstart = jiffies;
i = 0;
- while ((signed)(jiffies-tstart-HZ/3) < 0) {
+ while (time_before(jiffies, tstart + HZ/3)) {
if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
goto epptimeout;
if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
*/
static void baycom_probe(struct net_device *dev)
{
- static char ax25_bcast[AX25_ADDR_LEN] = {
- 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1
- };
- static char ax25_nocall[AX25_ADDR_LEN] = {
- 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1
- };
const struct hdlcdrv_channel_params dflt_ch_params = {
20, 2, 10, 40, 0
};
/* Fill in the fields of the device structure */
bc->skb = NULL;
-#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
- dev->hard_header = ax25_encapsulate;
+ dev->hard_header = ax25_hard_header;
dev->rebuild_header = ax25_rebuild_header;
-#else /* CONFIG_AX25 || CONFIG_AX25_MODULE */
- dev->hard_header = NULL;
- dev->rebuild_header = NULL;
-#endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */
dev->set_mac_address = baycom_set_mac_address;
dev->type = ARPHRD_AX25; /* AF_AX25 device */
dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */
dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN);
dev->tx_queue_len = 16;
/* New style flags */
/*
* initialize part of the baycom_state struct
*/
+ bc->dev = dev;
bc->magic = BAYCOM_MAGIC;
bc->cfg.fclk = 19666600;
bc->cfg.bps = 9600;