-
menu "Infrared-port device drivers"
depends on IRDA!=n
config ESI_DONGLE
tristate "ESI JetEye PC dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Extended Systems
JetEye PC dongle. To compile it as a module, choose M here. The ESI
config ACTISYS_DONGLE
tristate "ACTiSYS IR-220L and IR220L+ dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the ACTiSYS IR-220L and
IR220L+ dongles. To compile it as a module, choose M here. The
config TEKRAM_DONGLE
tristate "Tekram IrMate 210B dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Tekram IrMate 210B
dongle. To compile it as a module, choose M here. The Tekram dongle
dongles you will have to start irattach like this:
"irattach -d tekram".
+config TOIM3232_DONGLE
+ tristate "TOIM3232 IrDa dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Vishay/Temic
+ TOIM3232 and TOIM4232 based dongles.
+ To compile it as a module, choose M here.
+
config LITELINK_DONGLE
tristate "Parallax LiteLink dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Parallax Litelink
dongle. To compile it as a module, choose M here. The Parallax
config MA600_DONGLE
tristate "Mobile Action MA600 dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Mobile Action MA600
dongle. To compile it as a module, choose M here. The MA600 dongle
config GIRBIL_DONGLE
tristate "Greenwich GIrBIL dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Greenwich GIrBIL
dongle. If you want to compile it as a module, choose M here.
config MCP2120_DONGLE
tristate "Microchip MCP2120"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Microchip MCP2120
dongle. If you want to compile it as a module, choose M here.
config OLD_BELKIN_DONGLE
tristate "Old Belkin dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the ACTiSYS IR-200L
dongle. If you want to compile it as a module, choose M here.
config DONGLE_OLD
bool "Old Serial dongle support"
- depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP
+ depends on IRPORT_SIR && BROKEN_ON_SMP
help
Say Y here if you have an infrared device that connects to your
computer's serial port. These devices are called dongles. Then say Y
Say Y here if you want to build support for the USB IrDA FIR Dongle
device driver. To compile it as a module, choose M here: the module
will be called irda-usb. IrDA-USB support the various IrDA USB
- dongles available and most of their pecularities. Those dongles
+ dongles available and most of their peculiarities. Those dongles
plug in the USB port of your computer, are plug and play, and
support SIR and FIR (4Mbps) speeds. On the other hand, those
dongles tend to be less efficient than a FIR chipset.
config NSC_FIR
tristate "NSC PC87108/PC87338"
- depends on IRDA && ISA
+ depends on IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the NSC PC87108 and
PC87338 IrDA chipsets. This driver supports SIR,
config WINBOND_FIR
tristate "Winbond W83977AF (IR)"
- depends on IRDA && ISA
+ depends on IRDA && ISA_DMA_API
help
Say Y here if you want to build IrDA support for the Winbond
W83977AF super-io chipset. This driver should be used for the IrDA
config TOSHIBA_FIR
tristate "Toshiba Type-O IR Port"
- depends on IRDA
+ depends on IRDA && PCI && !64BIT
help
Say Y here if you want to build support for the Toshiba Type-O IR
and Donau oboe chipsets. These chipsets are used by the Toshiba
config AU1000_FIR
tristate "Alchemy Au1000 SIR/FIR"
- depends on MIPS_AU1000 && IRDA
+ depends on SOC_AU1000 && IRDA
config SMC_IRCC_FIR
tristate "SMSC IrCC (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IRDA && ISA
+ depends on EXPERIMENTAL && IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the SMC Infrared
Communications Controller. It is used in a wide variety of
config ALI_FIR
tristate "ALi M5123 FIR (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IRDA && ISA
+ depends on EXPERIMENTAL && IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the ALi M5123 FIR
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
- M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
+ M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
SIR, MIR and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
config VIA_FIR
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
- depends on IRDA && ISA
+ depends on IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the VIA VT8231
and VIA VT1211 IrDA controllers, found on the motherboards using
- those those VIA chipsets. To use this controller, you will need
+ those VIA chipsets. To use this controller, you will need
to plug a specific 5 pins FIR IrDA dongle in the specific
motherboard connector. The driver provides support for SIR, MIR
and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
via-ircc.
+config PXA_FICP
+ tristate "Intel PXA2xx Internal FICP"
+ depends on ARCH_PXA && IRDA
+ help
+ Say Y or M here if you want to build support for the PXA2xx
+ built-in IRDA interface which can support both SIR and FIR.
+ This driver relies on platform specific helper routines so
+ available capabilities may vary from one PXA2xx target to
+ another.
+
+config MCS_FIR
+ tristate "MosChip MCS7780 IrDA-USB dongle"
+ depends on IRDA && USB && EXPERIMENTAL
+ help
+ Say Y or M here if you want to build support for the MosChip
+ MCS7780 IrDA-USB bridge device driver.
+
+ USB bridge based on the MosChip MCS7780 don't conform to the
+ IrDA-USB device class specification, and therefore need their
+ own specific driver. Those dongles support SIR and FIR (4Mbps)
+ speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ mcs7780.
+
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff