static int num_media = 0;
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static const int max_interrupt_work = 20;
+static int max_interrupt_work = 20;
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
-static const int multicast_filter_limit = 32;
+static int multicast_filter_limit = 32;
/* MAC address length */
#define MAC_ADDR_LEN 6
static int rx_copybreak = 200;
static int use_dac;
+static int ignore_parity_err;
static struct {
u32 msg_enable;
} debug = { -1 };
RxOK = 0x01,
/* RxStatusDesc */
- RxRES = 0x00200000,
- RxCRC = 0x00080000,
- RxRUNT = 0x00100000,
- RxRWT = 0x00400000,
+ RxFOVF = (1 << 23),
+ RxRWT = (1 << 22),
+ RxRES = (1 << 21),
+ RxRUNT = (1 << 20),
+ RxCRC = (1 << 19),
/* ChipCmdBits */
CmdReset = 0x10,
MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
+module_param_named(ignore_parity_err, ignore_parity_err, bool, 0);
+MODULE_PARM_DESC(ignore_parity_err, "Ignore PCI parity error as target. Default: false");
MODULE_LICENSE("GPL");
MODULE_VERSION(RTL8169_VERSION);
static inline u32 rtl8169_tso_csum(struct sk_buff *skb, struct net_device *dev)
{
if (dev->features & NETIF_F_TSO) {
- u32 mss = skb_shinfo(skb)->gso_size;
+ u32 mss = skb_shinfo(skb)->tso_size;
if (mss)
return LargeSend | ((mss & MSSMask) << MSSShift);
/*
* The recovery sequence below admits a very elaborated explanation:
* - it seems to work;
- * - I did not see what else could be done.
+ * - I did not see what else could be done;
+ * - it makes iop3xx happy.
*
* Feel free to adjust to your needs.
*/
- pci_write_config_word(pdev, PCI_COMMAND,
- pci_cmd | PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
+ if (ignore_parity_err)
+ pci_cmd &= ~PCI_COMMAND_PARITY;
+ else
+ pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+
+ pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
pci_write_config_word(pdev, PCI_STATUS,
pci_status & (PCI_STATUS_DETECTED_PARITY |
tp->cp_cmd &= ~PCIDAC;
RTL_W16(CPlusCmd, tp->cp_cmd);
dev->features &= ~NETIF_F_HIGHDMA;
- rtl8169_schedule_work(dev, rtl8169_reinit_task);
}
rtl8169_hw_reset(ioaddr);
+
+ rtl8169_schedule_work(dev, rtl8169_reinit_task);
}
static void
tp->stats.rx_length_errors++;
if (status & RxCRC)
tp->stats.rx_crc_errors++;
+ if (status & RxFOVF) {
+ rtl8169_schedule_work(dev, rtl8169_reset_task);
+ tp->stats.rx_fifo_errors++;
+ }
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
} else {
struct sk_buff *skb = tp->Rx_skbuff[entry];
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned int poll_locked = 0;
+ unsigned int intrmask;
rtl8169_delete_timer(dev);
* 2) dev->change_mtu
* -> rtl8169_poll can not be issued again and re-enable the
* interruptions. Let's simply issue the IRQ down sequence again.
+ *
+ * No loop if hotpluged or major error (0xffff).
*/
- if (RTL_R16(IntrMask))
+ intrmask = RTL_R16(IntrMask);
+ if (intrmask && (intrmask != 0xffff))
goto core_down;
rtl8169_tx_clear(tp);