Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff
[linux-2.6.git] / drivers / net / sb1000.c
index 8ac2d81..66cf226 100644 (file)
@@ -50,16 +50,16 @@ static char version[] = "sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)\n";
 #include <linux/etherdevice.h>
 #include <linux/pnp.h>
 #include <linux/init.h>
+#include <linux/bitops.h>
 
-#include <asm/bitops.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 
 #ifdef SB1000_DEBUG
-int sb1000_debug = SB1000_DEBUG;
+static int sb1000_debug = SB1000_DEBUG;
 #else
-int sb1000_debug = 1;
+static const int sb1000_debug = 1;
 #endif
 
 static const int SB1000_IO_EXTENT = 8;
@@ -90,12 +90,11 @@ static int sb1000_close(struct net_device *dev);
 
 
 /* SB1000 hardware routines to be used during open/configuration phases */
-static inline void nicedelay(unsigned long usecs);
 static inline int card_wait_for_busy_clear(const int ioaddr[],
        const char* name);
 static inline int card_wait_for_ready(const int ioaddr[], const char* name,
        unsigned char in[]);
-static inline int card_send_command(const int ioaddr[], const char* name,
+static int card_send_command(const int ioaddr[], const char* name,
        const unsigned char out[], unsigned char in[]);
 
 /* SB1000 hardware routines to be used during frame rx interrupt */
@@ -116,15 +115,15 @@ static inline int sb1000_start_get_set_command(const int ioaddr[],
 static inline int sb1000_end_get_set_command(const int ioaddr[],
        const char* name);
 static inline int sb1000_activate(const int ioaddr[], const char* name);
-static inline int sb1000_get_firmware_version(const int ioaddr[],
+static int sb1000_get_firmware_version(const int ioaddr[],
        const char* name, unsigned char version[], int do_end);
-static inline int sb1000_get_frequency(const int ioaddr[], const char* name,
+static int sb1000_get_frequency(const int ioaddr[], const char* name,
        int* frequency);
-static inline int sb1000_set_frequency(const int ioaddr[], const char* name,
+static int sb1000_set_frequency(const int ioaddr[], const char* name,
        int frequency);
-static inline int sb1000_get_PIDs(const int ioaddr[], const char* name,
+static int sb1000_get_PIDs(const int ioaddr[], const char* name,
        short PID[]);
-static inline int sb1000_set_PIDs(const int ioaddr[], const char* name,
+static int sb1000_set_PIDs(const int ioaddr[], const char* name,
        const short PID[]);
 
 /* SB1000 commands for frame rx interrupt */
@@ -252,14 +251,7 @@ static struct pnp_driver sb1000_driver = {
  * SB1000 hardware routines to be used during open/configuration phases
  */
 
-const int TimeOutJiffies = (875 * HZ) / 100;
-
-static inline void nicedelay(unsigned long usecs)
-{
-       current->state = TASK_INTERRUPTIBLE;
-       schedule_timeout(HZ);
-       return;
-}
+static const int TimeOutJiffies = (875 * HZ) / 100;
 
 /* Card Wait For Busy Clear (cannot be used during an interrupt) */
 static inline int
@@ -317,7 +309,7 @@ card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[])
 }
 
 /* Card Send Command (cannot be used during an interrupt) */
-static inline int
+static int
 card_send_command(const int ioaddr[], const char* name,
        const unsigned char out[], unsigned char in[])
 {
@@ -363,7 +355,7 @@ card_send_command(const int ioaddr[], const char* name,
 /*
  * SB1000 hardware routines to be used during frame rx interrupt
  */
-const int Sb1000TimeOutJiffies = 7 * HZ;
+static const int Sb1000TimeOutJiffies = 7 * HZ;
 
 /* Card Wait For Ready (to be used during frame rx) */
 static inline int
@@ -475,7 +467,7 @@ sb1000_reset(const int ioaddr[], const char* name)
        udelay(1000);
        outb(0x0, port);
        inb(port);
-       nicedelay(60000);
+       ssleep(1);
        outb(0x4, port);
        inb(port);
        udelay(1000);
@@ -537,7 +529,7 @@ sb1000_activate(const int ioaddr[], const char* name)
        const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00};
        const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
 
-       nicedelay(50000);
+       ssleep(1);
        if ((status = card_send_command(ioaddr, name, Command0, st)))
                return status;
        if ((status = card_send_command(ioaddr, name, Command1, st)))
@@ -552,7 +544,7 @@ sb1000_activate(const int ioaddr[], const char* name)
 }
 
 /* get SB1000 firmware version */
-static inline int
+static int
 sb1000_get_firmware_version(const int ioaddr[], const char* name,
        unsigned char version[], int do_end)
 {
@@ -575,7 +567,7 @@ sb1000_get_firmware_version(const int ioaddr[], const char* name,
 }
 
 /* get SB1000 frequency */
-static inline int
+static int
 sb1000_get_frequency(const int ioaddr[], const char* name, int* frequency)
 {
        unsigned char st[7];
@@ -592,7 +584,7 @@ sb1000_get_frequency(const int ioaddr[], const char* name, int* frequency)
 }
 
 /* set SB1000 frequency */
-static inline int
+static int
 sb1000_set_frequency(const int ioaddr[], const char* name, int frequency)
 {
        unsigned char st[7];
@@ -622,7 +614,7 @@ sb1000_set_frequency(const int ioaddr[], const char* name, int frequency)
 }
 
 /* get SB1000 PIDs */
-static inline int
+static int
 sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[])
 {
        unsigned char st[7];
@@ -656,7 +648,7 @@ sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[])
 }
 
 /* set SB1000 PIDs */
-static inline int
+static int
 sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
 {
        unsigned char st[7];
@@ -799,7 +791,7 @@ skipped_frame:
                        skb ? session_id : session_id | 0x40, frame_id);
        if (skb) {
                dev_kfree_skb(skb);
-               skb = 0;
+               skb = NULL;
        }
 
 good_frame:
@@ -875,7 +867,7 @@ printk("cm0: IP identification: %02x%02x  fragment offset: %02x%02x\n", buffer[3
        dev->last_rx = jiffies;
        stats->rx_bytes+=dlen;
        stats->rx_packets++;
-       lp->rx_skb[ns] = 0;
+       lp->rx_skb[ns] = NULL;
        lp->rx_session_id[ns] |= 0x40;
        return 0;
 
@@ -893,7 +885,7 @@ dropped_frame:
        if (ns < NPIDS) {
                if ((skb = lp->rx_skb[ns])) {
                        dev_kfree_skb(skb);
-                       lp->rx_skb[ns] = 0;
+                       lp->rx_skb[ns] = NULL;
                }
                lp->rx_session_id[ns] |= 0x40;
        }
@@ -944,7 +936,7 @@ sb1000_open(struct net_device *dev)
        /* initialize sb1000 */
        if ((status = sb1000_reset(ioaddr, name)))
                return status;
-       nicedelay(200000);
+       ssleep(1);
        if ((status = sb1000_check_CRC(ioaddr, name)))
                return status;