/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux.
Copyright 1999 Silicon Integrated System Corporation
- Revision: 1.08.06 Sep. 24 2002
+ Revision: 1.08.08 Jan. 22 2005
Modified from the driver which is originally written by Donald Becker.
preliminary Rev. 1.0 Nov. 10, 1998
SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
preliminary Rev. 1.0 Jan. 18, 1998
- http://www.sis.com.tw/support/databook.htm
+ Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages
Rev 1.08.07 Nov. 2 2003 Daniele Venzano <webvenza@libero.it> add suspend/resume support
Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support
Rev 1.08.05 Jun. 6 2002 Mufasa Yang bug fix for read_eeprom & Tx descriptor over-boundary
*/
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/crc32.h>
+#include <linux/bitops.h>
#include <asm/processor.h> /* Processor type for cache alignment. */
-#include <asm/bitops.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/uaccess.h> /* User space memory access functions */
#include "sis900.h"
#define SIS900_MODULE_NAME "sis900"
-#define SIS900_DRV_VERSION "v1.08.07 11/02/2003"
+#define SIS900_DRV_VERSION "v1.08.08 Jan. 22 2005"
static char version[] __devinitdata =
KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n";
static int max_interrupt_work = 40;
static int multicast_filter_limit = 128;
-#define sis900_debug debug
-static int sis900_debug;
+static int sis900_debug = -1; /* Use SIS900_DEF_MSG as value */
+
+#define SIS900_DEF_MSG \
+ (NETIF_MSG_DRV | \
+ NETIF_MSG_LINK | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR)
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (4*HZ)
#define HOME 0x0001
#define LAN 0x0002
#define MIX 0x0003
+#define UNKNOWN 0x0
} mii_chip_table[] = {
{ "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN },
{ "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN },
+ { "Altimata AC101LF PHY", 0x0022, 0x5520, LAN },
{ "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN },
{ "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME},
{ "ICS LAN PHY", 0x0015, 0xF440, LAN },
{ "NS 83851 PHY", 0x2000, 0x5C20, MIX },
+ { "NS 83847 PHY", 0x2000, 0x5C30, MIX },
{ "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN },
{ "VIA 6103 PHY", 0x0101, 0x8f20, LAN },
- {0,},
+ {NULL,},
};
struct mii_phy {
};
typedef struct _BufferDesc {
- u32 link;
- u32 cmdsts;
- u32 bufptr;
+ u32 link;
+ u32 cmdsts;
+ u32 bufptr;
} BufferDesc;
struct sis900_private {
struct mii_phy * mii;
struct mii_phy * first_mii; /* record the first mii structure */
unsigned int cur_phy;
+ struct mii_if_info mii_info;
struct timer_list timer; /* Link status detection timer. */
- u8 autong_complete; /* 1: auto-negotiate complete */
+ u8 autong_complete; /* 1: auto-negotiate complete */
+
+ u32 msg_enable;
unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */
unsigned int cur_tx, dirty_tx;
dma_addr_t tx_ring_dma;
dma_addr_t rx_ring_dma;
- unsigned int tx_full; /* The Tx queue is full. */
+ unsigned int tx_full; /* The Tx queue is full. */
u8 host_bridge_rev;
- u32 pci_state[16];
+ u8 chipset_rev;
};
MODULE_AUTHOR("Jim Huang <cmhuang@sis.com.tw>, Ollie Lho <ollie@sis.com.tw>");
MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver");
MODULE_LICENSE("GPL");
-MODULE_PARM(multicast_filter_limit, "i");
-MODULE_PARM(max_interrupt_work, "i");
-MODULE_PARM(debug, "i");
+module_param(multicast_filter_limit, int, 0444);
+module_param(max_interrupt_work, int, 0444);
+module_param(sis900_debug, int, 0444);
MODULE_PARM_DESC(multicast_filter_limit, "SiS 900/7016 maximum number of filtered multicast addresses");
MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per interrupt");
-MODULE_PARM_DESC(debug, "SiS 900/7016 debug level (2-4)");
+MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message level");
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sis900_poll(struct net_device *dev);
+#endif
static int sis900_open(struct net_device *net_dev);
static int sis900_mii_probe (struct net_device * net_dev);
static void sis900_init_rxfilter (struct net_device * net_dev);
static u16 read_eeprom(long ioaddr, int location);
-static u16 mdio_read(struct net_device *net_dev, int phy_id, int location);
+static int mdio_read(struct net_device *net_dev, int phy_id, int location);
static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val);
static void sis900_timer(unsigned long data);
static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy);
/* check to see if we have sane EEPROM */
signature = (u16) read_eeprom(ioaddr, EEPROMSignature);
if (signature == 0xffff || signature == 0x0000) {
- printk (KERN_INFO "%s: Error EERPOM read %x\n",
- net_dev->name, signature);
+ printk (KERN_WARNING "%s: Error EERPOM read %x\n",
+ pci_name(pci_dev), signature);
return 0;
}
* MAC address is read into @net_dev->dev_addr.
*/
-static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
+static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
+ struct net_device *net_dev)
{
struct pci_dev *isa_bridge = NULL;
u8 reg;
int i;
- isa_bridge = pci_find_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge);
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge);
+ if (!isa_bridge)
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge);
if (!isa_bridge) {
- isa_bridge = pci_find_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge);
- if (!isa_bridge) {
- printk("%s: Can not find ISA bridge\n", net_dev->name);
- return 0;
- }
+ printk(KERN_WARNING "%s: Can not find ISA bridge\n",
+ pci_name(pci_dev));
+ return 0;
}
pci_read_config_byte(isa_bridge, 0x48, ®);
pci_write_config_byte(isa_bridge, 0x48, reg | 0x40);
((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
}
pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40);
+ pci_dev_put(isa_bridge);
return 1;
}
* @net_dev->dev_addr.
*/
-static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
+static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
+ struct net_device *net_dev)
{
long ioaddr = net_dev->base_addr;
u32 rfcrSave;
* MAC address is read into @net_dev->dev_addr.
*/
-static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
+static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
+ struct net_device *net_dev)
{
long ioaddr = net_dev->base_addr;
long ee_addr = ioaddr + mear;
* ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc.
*/
-static int __devinit sis900_probe (struct pci_dev *pci_dev, const struct pci_device_id *pci_id)
+static int __devinit sis900_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *pci_id)
{
struct sis900_private *sis_priv;
struct net_device *net_dev;
void *ring_space;
long ioaddr;
int i, ret;
- u8 revision;
char *card_name = card_names[pci_id->driver_data];
+ const char *dev_name = pci_name(pci_dev);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
net_dev->tx_timeout = sis900_tx_timeout;
net_dev->watchdog_timeo = TX_TIMEOUT;
net_dev->ethtool_ops = &sis900_ethtool_ops;
-
- ret = register_netdev(net_dev);
- if (ret)
- goto err_unmap_rx;
-
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ net_dev->poll_controller = &sis900_poll;
+#endif
+
+ if (sis900_debug > 0)
+ sis_priv->msg_enable = sis900_debug;
+ else
+ sis_priv->msg_enable = SIS900_DEF_MSG;
+
+ sis_priv->mii_info.dev = net_dev;
+ sis_priv->mii_info.mdio_read = mdio_read;
+ sis_priv->mii_info.mdio_write = mdio_write;
+ sis_priv->mii_info.phy_id_mask = 0x1f;
+ sis_priv->mii_info.reg_num_mask = 0x1f;
+
/* Get Mac address according to the chip revision */
- pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &revision);
+ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &(sis_priv->chipset_rev));
+ if(netif_msg_probe(sis_priv))
+ printk(KERN_DEBUG "%s: detected revision %2.2x, "
+ "trying to get MAC address...\n",
+ dev_name, sis_priv->chipset_rev);
+
ret = 0;
-
- if (revision == SIS630E_900_REV)
+ if (sis_priv->chipset_rev == SIS630E_900_REV)
ret = sis630e_get_mac_addr(pci_dev, net_dev);
- else if ((revision > 0x81) && (revision <= 0x90) )
+ else if ((sis_priv->chipset_rev > 0x81) && (sis_priv->chipset_rev <= 0x90) )
ret = sis635_get_mac_addr(pci_dev, net_dev);
- else if (revision == SIS96x_900_REV)
+ else if (sis_priv->chipset_rev == SIS96x_900_REV)
ret = sis96x_get_mac_addr(pci_dev, net_dev);
else
ret = sis900_get_mac_addr(pci_dev, net_dev);
if (ret == 0) {
+ printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
ret = -ENODEV;
- goto err_out_unregister;
+ goto err_unmap_rx;
}
/* 630ET : set the mii access mode as software-mode */
- if (revision == SIS630ET_900_REV)
+ if (sis_priv->chipset_rev == SIS630ET_900_REV)
outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr);
/* probe for mii transceiver */
if (sis900_mii_probe(net_dev) == 0) {
+ printk(KERN_WARNING "%s: Error probing MII device.\n",
+ dev_name);
ret = -ENODEV;
- goto err_out_unregister;
+ goto err_unmap_rx;
}
/* save our host bridge revision */
- dev = pci_find_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL);
- if (dev)
+ dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL);
+ if (dev) {
pci_read_config_byte(dev, PCI_CLASS_REVISION, &sis_priv->host_bridge_rev);
+ pci_dev_put(dev);
+ }
+
+ ret = register_netdev(net_dev);
+ if (ret)
+ goto err_unmap_rx;
/* print some information about our NIC */
printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ", net_dev->name,
return 0;
- err_out_unregister:
- unregister_netdev(net_dev);
err_unmap_rx:
pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring,
sis_priv->rx_ring_dma);
* return error if it failed to found.
*/
-static int __init sis900_mii_probe (struct net_device * net_dev)
+static int __init sis900_mii_probe(struct net_device * net_dev)
{
struct sis900_private * sis_priv = net_dev->priv;
+ const char *dev_name = pci_name(sis_priv->pci_dev);
u16 poll_bit = MII_STAT_LINK, status = 0;
unsigned long timeout = jiffies + 5 * HZ;
int phy_addr;
- u8 revision;
sis_priv->mii = NULL;
for(i = 0; i < 2; i++)
mii_status = mdio_read(net_dev, phy_addr, MII_STATUS);
- if (mii_status == 0xffff || mii_status == 0x0000)
- /* the mii is not accessible, try next one */
+ if (mii_status == 0xffff || mii_status == 0x0000) {
+ if (netif_msg_probe(sis_priv))
+ printk(KERN_DEBUG "%s: MII at address %d"
+ " not accessible\n",
+ dev_name, phy_addr);
continue;
+ }
if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) {
- printk(KERN_INFO "Cannot allocate mem for struct mii_phy\n");
+ printk(KERN_WARNING "Cannot allocate mem for struct mii_phy\n");
mii_phy = sis_priv->first_mii;
while (mii_phy) {
struct mii_phy *phy;
mii_phy->phy_types = mii_chip_table[i].phy_types;
if (mii_chip_table[i].phy_types == MIX)
mii_phy->phy_types =
- (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME;
- printk(KERN_INFO "%s: %s transceiver found at address %d.\n",
- net_dev->name, mii_chip_table[i].name, phy_addr);
+ (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME;
+ printk(KERN_INFO "%s: %s transceiver found "
+ "at address %d.\n",
+ dev_name,
+ mii_chip_table[i].name,
+ phy_addr);
break;
}
- if( !mii_chip_table[i].phy_id1 )
+ if( !mii_chip_table[i].phy_id1 ) {
printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
- net_dev->name, phy_addr);
+ dev_name, phy_addr);
+ mii_phy->phy_types = UNKNOWN;
+ }
}
if (sis_priv->mii == NULL) {
- printk(KERN_INFO "%s: No MII transceivers found!\n",
- net_dev->name);
+ printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name);
return 0;
}
poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit);
if (time_after_eq(jiffies, timeout)) {
- printk(KERN_WARNING "%s: reset phy and link down now\n", net_dev->name);
+ printk(KERN_WARNING "%s: reset phy and link down now\n",
+ dev_name);
return -ETIME;
}
}
}
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- if (revision == SIS630E_900_REV) {
+ if (sis_priv->chipset_rev == SIS630E_900_REV) {
/* SiS 630E has some bugs on default value of PHY registers */
mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1);
mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22);
static u16 sis900_default_phy(struct net_device * net_dev)
{
struct sis900_private * sis_priv = net_dev->priv;
- struct mii_phy *phy = NULL, *phy_home = NULL, *default_phy = NULL;
+ struct mii_phy *phy = NULL, *phy_home = NULL,
+ *default_phy = NULL, *phy_lan = NULL;
u16 status;
- for( phy=sis_priv->first_mii; phy; phy=phy->next ){
+ for (phy=sis_priv->first_mii; phy; phy=phy->next) {
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
- /* Link ON & Not select deafalut PHY */
- if ( (status & MII_STAT_LINK) && !(default_phy) )
+ /* Link ON & Not select default PHY & not ghost PHY */
+ if ((status & MII_STAT_LINK) && !default_phy &&
+ (phy->phy_types != UNKNOWN))
default_phy = phy;
- else{
+ else {
status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL);
mdio_write(net_dev, phy->phy_addr, MII_CONTROL,
status | MII_CNTL_AUTO | MII_CNTL_ISOLATE);
- if( phy->phy_types == HOME )
+ if (phy->phy_types == HOME)
phy_home = phy;
+ else if(phy->phy_types == LAN)
+ phy_lan = phy;
}
}
- if( (!default_phy) && phy_home )
+ if (!default_phy && phy_home)
default_phy = phy_home;
- else if(!default_phy)
+ else if (!default_phy && phy_lan)
+ default_phy = phy_lan;
+ else if (!default_phy)
default_phy = sis_priv->first_mii;
- if( sis_priv->mii != default_phy ){
+ if (sis_priv->mii != default_phy) {
sis_priv->mii = default_phy;
sis_priv->cur_phy = default_phy->phy_addr;
- printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", net_dev->name,sis_priv->cur_phy);
+ printk(KERN_INFO "%s: Using transceiver found at address %d as default\n",
+ pci_name(sis_priv->pci_dev), sis_priv->cur_phy);
}
+ sis_priv->mii_info.phy_id = sis_priv->cur_phy;
+
status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL);
status &= (~MII_CNTL_ISOLATE);
* mii status register. It's necessary before auto-negotiate.
*/
-static void sis900_set_capability( struct net_device *net_dev , struct mii_phy *phy )
+static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy)
{
u16 cap;
u16 status;
* Please see SiS7014 or ICS spec
*/
-static u16 mdio_read(struct net_device *net_dev, int phy_id, int location)
+static int mdio_read(struct net_device *net_dev, int phy_id, int location)
{
long mdio_addr = net_dev->base_addr + mear;
int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
* please see SiS7014 or ICS spec
*/
-static void mdio_write(struct net_device *net_dev, int phy_id, int location, int value)
+static void mdio_write(struct net_device *net_dev, int phy_id, int location,
+ int value)
{
long mdio_addr = net_dev->base_addr + mear;
int mii_cmd = MIIwrite|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
return status;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+*/
+static void sis900_poll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ sis900_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
/**
* sis900_open - open sis900 device
* @net_dev: the net device to open
{
struct sis900_private *sis_priv = net_dev->priv;
long ioaddr = net_dev->base_addr;
- u8 revision;
int ret;
/* Soft reset the chip. */
sis900_reset(net_dev);
/* Equalizer workaround Rule */
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- sis630_set_eq(net_dev, revision);
+ sis630_set_eq(net_dev, sis_priv->chipset_rev);
- ret = request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ, net_dev->name, net_dev);
+ ret = request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ,
+ net_dev->name, net_dev);
if (ret)
return ret;
static void
sis900_init_rxfilter (struct net_device * net_dev)
{
+ struct sis900_private *sis_priv = net_dev->priv;
long ioaddr = net_dev->base_addr;
u32 rfcrSave;
u32 i;
outl((i << RFADDR_shift), ioaddr + rfcr);
outl(w, ioaddr + rfdr);
- if (sis900_debug > 2) {
- printk(KERN_INFO "%s: Receive Filter Addrss[%d]=%x\n",
+ if (netif_msg_hw(sis_priv)) {
+ printk(KERN_DEBUG "%s: Receive Filter Addrss[%d]=%x\n",
net_dev->name, i, inl(ioaddr + rfdr));
}
}
/* load Transmit Descriptor Register */
outl(sis_priv->tx_ring_dma, ioaddr + txdp);
- if (sis900_debug > 2)
- printk(KERN_INFO "%s: TX descriptor register loaded with: %8.8x\n",
+ if (netif_msg_hw(sis_priv))
+ printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n",
net_dev->name, inl(ioaddr + txdp));
}
/* load Receive Descriptor Register */
outl(sis_priv->rx_ring_dma, ioaddr + rxdp);
- if (sis900_debug > 2)
- printk(KERN_INFO "%s: RX descriptor register loaded with: %8.8x\n",
+ if (netif_msg_hw(sis_priv))
+ printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n",
net_dev->name, inl(ioaddr + rxdp));
}
return;
if (netif_carrier_ok(net_dev)) {
- reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
- mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (0x2200 | reg14h) & 0xBFFF);
+ reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+ mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
+ (0x2200 | reg14h) & 0xBFFF);
for (i=0; i < maxcount; i++) {
- eq_value=(0x00F8 & mdio_read(net_dev, sis_priv->cur_phy, MII_RESV)) >> 3;
+ eq_value = (0x00F8 & mdio_read(net_dev,
+ sis_priv->cur_phy, MII_RESV)) >> 3;
if (i == 0)
max_value=min_value=eq_value;
- max_value=(eq_value > max_value) ? eq_value : max_value;
- min_value=(eq_value < min_value) ? eq_value : min_value;
+ max_value = (eq_value > max_value) ?
+ eq_value : max_value;
+ min_value = (eq_value < min_value) ?
+ eq_value : min_value;
}
/* 630E rule to determine the equalizer value */
if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV ||
revision == SIS630ET_900_REV) {
if (max_value < 5)
- eq_value=max_value;
+ eq_value = max_value;
else if (max_value >= 5 && max_value < 15)
- eq_value=(max_value == min_value) ? max_value+2 : max_value+1;
+ eq_value = (max_value == min_value) ?
+ max_value+2 : max_value+1;
else if (max_value >= 15)
- eq_value=(max_value == min_value) ? max_value+6 : max_value+5;
+ eq_value=(max_value == min_value) ?
+ max_value+6 : max_value+5;
}
/* 630B0&B1 rule to determine the equalizer value */
if (revision == SIS630A_900_REV &&
(sis_priv->host_bridge_rev == SIS630B0 ||
sis_priv->host_bridge_rev == SIS630B1)) {
if (max_value == 0)
- eq_value=3;
+ eq_value = 3;
else
- eq_value=(max_value+min_value+1)/2;
+ eq_value = (max_value + min_value + 1)/2;
}
/* write equalizer value and setting */
- reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
- reg14h=(reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8);
- reg14h=(reg14h | 0x6000) & 0xFDFF;
+ reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+ reg14h = (reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8);
+ reg14h = (reg14h | 0x6000) & 0xFDFF;
mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h);
- }
- else {
- reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+ } else {
+ reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
if (revision == SIS630A_900_REV &&
(sis_priv->host_bridge_rev == SIS630B0 ||
sis_priv->host_bridge_rev == SIS630B1))
- mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2200) & 0xBFFF);
+ mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
+ (reg14h | 0x2200) & 0xBFFF);
else
- mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2000) & 0xBFFF);
+ mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
+ (reg14h | 0x2000) & 0xBFFF);
}
return;
}
struct mii_phy *mii_phy = sis_priv->mii;
static int next_tick = 5*HZ;
u16 status;
- u8 revision;
if (!sis_priv->autong_complete){
int speed, duplex = 0;
sis900_read_mode(net_dev, &speed, &duplex);
if (duplex){
sis900_set_mode(net_dev->base_addr, speed, duplex);
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- sis630_set_eq(net_dev, revision);
+ sis630_set_eq(net_dev, sis_priv->chipset_rev);
netif_start_queue(net_dev);
}
sis900_check_mode(net_dev, mii_phy);
netif_carrier_on(net_dev);
}
- }
+ } else {
/* Link ON -> OFF */
- else {
if (!(status & MII_STAT_LINK)){
netif_carrier_off(net_dev);
- printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+ if(netif_msg_link(sis_priv))
+ printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
/* Change mode issue */
if ((mii_phy->phy_id0 == 0x001D) &&
((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
sis900_reset_phy(net_dev, sis_priv->cur_phy);
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- sis630_set_eq(net_dev, revision);
+ sis630_set_eq(net_dev, sis_priv->chipset_rev);
goto LookForLink;
}
* and autong_complete should be set to 1.
*/
-static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy)
+static void sis900_check_mode(struct net_device *net_dev, struct mii_phy *mii_phy)
{
struct sis900_private *sis_priv = net_dev->priv;
long ioaddr = net_dev->base_addr;
int speed, duplex;
- if( mii_phy->phy_types == LAN ){
- outl( ~EXD & inl( ioaddr + cfg ), ioaddr + cfg);
+ if (mii_phy->phy_types == LAN) {
+ outl(~EXD & inl(ioaddr + cfg), ioaddr + cfg);
sis900_set_capability(net_dev , mii_phy);
sis900_auto_negotiate(net_dev, sis_priv->cur_phy);
- }else{
- outl(EXD | inl( ioaddr + cfg ), ioaddr + cfg);
+ } else {
+ outl(EXD | inl(ioaddr + cfg), ioaddr + cfg);
speed = HW_SPEED_HOME;
duplex = FDX_CAPABLE_HALF_SELECTED;
sis900_set_mode(ioaddr, speed, duplex);
{
u32 tx_flags = 0, rx_flags = 0;
- if( inl(ioaddr + cfg) & EDB_MASTER_EN ){
- tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift);
+ if (inl(ioaddr + cfg) & EDB_MASTER_EN) {
+ tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) |
+ (TX_FILL_THRESH << TxFILLT_shift);
rx_flags = DMA_BURST_64 << RxMXDMA_shift;
- }
- else{
- tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift);
+ } else {
+ tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) |
+ (TX_FILL_THRESH << TxFILLT_shift);
rx_flags = DMA_BURST_512 << RxMXDMA_shift;
}
- if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS ) {
+ if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) {
rx_flags |= (RxDRNT_10 << RxDRNT_shift);
tx_flags |= (TxDRNT_10 << TxDRNT_shift);
- }
- else {
+ } else {
rx_flags |= (RxDRNT_100 << RxDRNT_shift);
tx_flags |= (TxDRNT_100 << TxDRNT_shift);
}
status = mdio_read(net_dev, phy_addr, MII_STATUS);
if (!(status & MII_STAT_LINK)){
- printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+ if(netif_msg_link(sis_priv))
+ printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
sis_priv->autong_complete = 1;
netif_carrier_off(net_dev);
return;
sis_priv->autong_complete = 1;
/* Workaround for Realtek RTL8201 PHY issue */
- if((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)){
- if(mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX)
+ if ((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)) {
+ if (mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX)
*duplex = FDX_CAPABLE_FULL_SELECTED;
- if(mdio_read(net_dev, phy_addr, 0x0019) & 0x01)
+ if (mdio_read(net_dev, phy_addr, 0x0019) & 0x01)
*speed = HW_SPEED_100_MBPS;
}
- printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
- net_dev->name,
- *speed == HW_SPEED_100_MBPS ?
- "100mbps" : "10mbps",
- *duplex == FDX_CAPABLE_FULL_SELECTED ?
- "full" : "half");
+ if(netif_msg_link(sis_priv))
+ printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
+ net_dev->name,
+ *speed == HW_SPEED_100_MBPS ?
+ "100mbps" : "10mbps",
+ *duplex == FDX_CAPABLE_FULL_SELECTED ?
+ "full" : "half");
}
/**
unsigned long flags;
int i;
- printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
- net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
+ if(netif_msg_tx_err(sis_priv))
+ printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
+ net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
/* Disable interrupts by clearing the interrupt mask. */
outl(0x0000, ioaddr + imr);
sis_priv->tx_ring[i].bufptr, skb->len,
PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
- sis_priv->tx_skbuff[i] = 0;
+ sis_priv->tx_skbuff[i] = NULL;
sis_priv->tx_ring[i].cmdsts = 0;
sis_priv->tx_ring[i].bufptr = 0;
sis_priv->stats.tx_dropped++;
net_dev->trans_start = jiffies;
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: Queued Tx packet at %p size %d "
+ if (netif_msg_tx_queued(sis_priv))
+ printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d "
"to slot %d.\n",
net_dev->name, skb->data, (int)skb->len, entry);
/* something strange happened !!! */
if (status & HIBERR) {
- printk(KERN_INFO "%s: Abnormal interrupt,"
- "status %#8.8x.\n", net_dev->name, status);
+ if(netif_msg_intr(sis_priv))
+ printk(KERN_INFO "%s: Abnormal interrupt,"
+ "status %#8.8x.\n", net_dev->name, status);
break;
}
if (--boguscnt < 0) {
- printk(KERN_INFO "%s: Too much work at interrupt, "
- "interrupt status = %#8.8x.\n",
- net_dev->name, status);
+ if(netif_msg_intr(sis_priv))
+ printk(KERN_INFO "%s: Too much work at interrupt, "
+ "interrupt status = %#8.8x.\n",
+ net_dev->name, status);
break;
}
} while (1);
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: exiting interrupt, "
+ if(netif_msg_intr(sis_priv))
+ printk(KERN_DEBUG "%s: exiting interrupt, "
"interrupt status = 0x%#8.8x.\n",
net_dev->name, inl(ioaddr + isr));
unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
- if (sis900_debug > 3)
- printk(KERN_INFO "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
+ if (netif_msg_rx_status(sis_priv))
+ printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
"status:0x%8.8x\n",
sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
/* corrupted packet received */
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: Corrupted packet "
+ if (netif_msg_rx_err(sis_priv))
+ printk(KERN_DEBUG "%s: Corrupted packet "
"received, buffer status = 0x%8.8x.\n",
net_dev->name, rx_status);
sis_priv->stats.rx_errors++;
some unknow bugs, it is possible that
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
- printk(KERN_INFO "%s: NULL pointer "
- "encountered in Rx ring, skipping\n",
- net_dev->name);
+ if (netif_msg_rx_err(sis_priv))
+ printk(KERN_INFO "%s: NULL pointer "
+ "encountered in Rx ring, skipping\n",
+ net_dev->name);
break;
}
sis_priv->stats.rx_bytes += rx_size;
sis_priv->stats.rx_packets++;
- /* refill the Rx buffer, what if there is not enought memory for
- new socket buffer ?? */
+ /* refill the Rx buffer, what if there is not enought
+ * memory for new socket buffer ?? */
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
- /* not enough memory for skbuff, this makes a "hole"
- on the buffer ring, it is not clear how the
- hardware will react to this kind of degenerated
- buffer */
- printk(KERN_INFO "%s: Memory squeeze,"
- "deferring packet.\n",
- net_dev->name);
+ /* not enough memory for skbuff, this makes a
+ * "hole" on the buffer ring, it is not clear
+ * how the hardware will react to this kind
+ * of degenerated buffer */
+ if (netif_msg_rx_status(sis_priv))
+ printk(KERN_INFO "%s: Memory squeeze,"
+ "deferring packet.\n",
+ net_dev->name);
sis_priv->rx_skbuff[entry] = NULL;
/* reset buffer descriptor state */
sis_priv->rx_ring[entry].cmdsts = 0;
rx_status = sis_priv->rx_ring[entry].cmdsts;
} // while
- /* refill the Rx buffer, what if the rate of refilling is slower than
- consuming ?? */
+ /* refill the Rx buffer, what if the rate of refilling is slower
+ * than consuming ?? */
for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) {
struct sk_buff *skb;
if (sis_priv->rx_skbuff[entry] == NULL) {
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
- /* not enough memory for skbuff, this makes a "hole"
- on the buffer ring, it is not clear how the
- hardware will react to this kind of degenerated
- buffer */
- printk(KERN_INFO "%s: Memory squeeze,"
- "deferring packet.\n",
- net_dev->name);
+ /* not enough memory for skbuff, this makes a
+ * "hole" on the buffer ring, it is not clear
+ * how the hardware will react to this kind
+ * of degenerated buffer */
+ if (netif_msg_rx_err(sis_priv))
+ printk(KERN_INFO "%s: Memory squeeze,"
+ "deferring packet.\n",
+ net_dev->name);
sis_priv->stats.rx_dropped++;
break;
}
if (tx_status & OWN) {
/* The packet is not transmitted yet (owned by hardware) !
- Note: the interrupt is generated only when Tx Machine
- is idle, so this is an almost impossible case */
+ * Note: the interrupt is generated only when Tx Machine
+ * is idle, so this is an almost impossible case */
break;
}
if (tx_status & (ABORT | UNDERRUN | OWCOLL)) {
/* packet unsuccessfully transmitted */
- if (sis900_debug > 3)
- printk(KERN_INFO "%s: Transmit "
+ if (netif_msg_tx_err(sis_priv))
+ printk(KERN_DEBUG "%s: Transmit "
"error, Tx status %8.8x.\n",
net_dev->name, tx_status);
sis_priv->stats.tx_errors++;
if (sis_priv->tx_full && netif_queue_stopped(net_dev) &&
sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) {
- /* The ring is no longer full, clear tx_full and schedule more transmission
- by netif_wake_queue(net_dev) */
+ /* The ring is no longer full, clear tx_full and schedule
+ * more transmission by netif_wake_queue(net_dev) */
sis_priv->tx_full = 0;
netif_wake_queue (net_dev);
}
* free Tx and RX socket buffer
*/
-static int
-sis900_close(struct net_device *net_dev)
+static int sis900_close(struct net_device *net_dev)
{
long ioaddr = net_dev->base_addr;
struct sis900_private *sis_priv = net_dev->priv;
sis_priv->rx_ring[i].bufptr,
RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
- sis_priv->rx_skbuff[i] = 0;
+ sis_priv->rx_skbuff[i] = NULL;
}
}
for (i = 0; i < NUM_TX_DESC; i++) {
sis_priv->tx_ring[i].bufptr, skb->len,
PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
- sis_priv->tx_skbuff[i] = 0;
+ sis_priv->tx_skbuff[i] = NULL;
}
}
strcpy (info->bus_info, pci_name(sis_priv->pci_dev));
}
+static u32 sis900_get_msglevel(struct net_device *net_dev)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ return sis_priv->msg_enable;
+}
+
+static void sis900_set_msglevel(struct net_device *net_dev, u32 value)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ sis_priv->msg_enable = value;
+}
+
+static u32 sis900_get_link(struct net_device *net_dev)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ return mii_link_ok(&sis_priv->mii_info);
+}
+
+static int sis900_get_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ spin_lock_irq(&sis_priv->lock);
+ mii_ethtool_gset(&sis_priv->mii_info, cmd);
+ spin_unlock_irq(&sis_priv->lock);
+ return 0;
+}
+
+static int sis900_set_settings(struct net_device *net_dev,
+ struct ethtool_cmd *cmd)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ int rt;
+ spin_lock_irq(&sis_priv->lock);
+ rt = mii_ethtool_sset(&sis_priv->mii_info, cmd);
+ spin_unlock_irq(&sis_priv->lock);
+ return rt;
+}
+
+static int sis900_nway_reset(struct net_device *net_dev)
+{
+ struct sis900_private *sis_priv = net_dev->priv;
+ return mii_nway_restart(&sis_priv->mii_info);
+}
+
static struct ethtool_ops sis900_ethtool_ops = {
- .get_drvinfo = sis900_get_drvinfo,
+ .get_drvinfo = sis900_get_drvinfo,
+ .get_msglevel = sis900_get_msglevel,
+ .set_msglevel = sis900_set_msglevel,
+ .get_link = sis900_get_link,
+ .get_settings = sis900_get_settings,
+ .set_settings = sis900_set_settings,
+ .nway_reset = sis900_nway_reset,
};
/**
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
/* we switch on the ifmap->port field. I couldn't find anything
- like a definition or standard for the values of that field.
- I think the meaning of those values is device specific. But
- since I would like to change the media type via the ifconfig
- command I use the definition from linux/netdevice.h
- (which seems to be different from the ifport(pcmcia) definition)
- */
+ * like a definition or standard for the values of that field.
+ * I think the meaning of those values is device specific. But
+ * since I would like to change the media type via the ifconfig
+ * command I use the definition from linux/netdevice.h
+ * (which seems to be different from the ifport(pcmcia) definition) */
switch(map->port){
case IF_PORT_UNKNOWN: /* use auto here */
dev->if_port = map->port;
- /* we are going to change the media type, so the Link will
- be temporary down and we need to reflect that here. When
- the Link comes up again, it will be sensed by the sis_timer
- procedure, which also does all the rest for us */
+ /* we are going to change the media type, so the Link
+ * will be temporary down and we need to reflect that
+ * here. When the Link comes up again, it will be
+ * sensed by the sis_timer procedure, which also does
+ * all the rest for us */
netif_carrier_off(dev);
/* read current state */
status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
/* enable auto negotiation and reset the negotioation
- (I don't really know what the auto negatiotiation reset
- really means, but it sounds for me right to do one here)*/
+ * (I don't really know what the auto negatiotiation
+ * reset really means, but it sounds for me right to
+ * do one here) */
mdio_write(dev, mii_phy->phy_addr,
MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
case IF_PORT_10BASET: /* 10BaseT */
dev->if_port = map->port;
- /* we are going to change the media type, so the Link will
- be temporary down and we need to reflect that here. When
- the Link comes up again, it will be sensed by the sis_timer
- procedure, which also does all the rest for us */
+ /* we are going to change the media type, so the Link
+ * will be temporary down and we need to reflect that
+ * here. When the Link comes up again, it will be
+ * sensed by the sis_timer procedure, which also does
+ * all the rest for us */
netif_carrier_off(dev);
/* set Speed to 10Mbps */
/* disable auto negotiation and force 10MBit mode*/
mdio_write(dev, mii_phy->phy_addr,
- MII_CONTROL, status & ~(MII_CNTL_SPEED | MII_CNTL_AUTO));
+ MII_CONTROL, status & ~(MII_CNTL_SPEED |
+ MII_CNTL_AUTO));
break;
case IF_PORT_100BASET: /* 100BaseT */
case IF_PORT_100BASETX: /* 100BaseTx */
dev->if_port = map->port;
- /* we are going to change the media type, so the Link will
- be temporary down and we need to reflect that here. When
- the Link comes up again, it will be sensed by the sis_timer
- procedure, which also does all the rest for us */
+ /* we are going to change the media type, so the Link
+ * will be temporary down and we need to reflect that
+ * here. When the Link comes up again, it will be
+ * sensed by the sis_timer procedure, which also does
+ * all the rest for us */
netif_carrier_off(dev);
/* set Speed to 100Mbps */
/* disable auto negotiation and enable 100MBit Mode */
status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
mdio_write(dev, mii_phy->phy_addr,
- MII_CONTROL, (status & ~MII_CNTL_SPEED) | MII_CNTL_SPEED);
+ MII_CONTROL, (status & ~MII_CNTL_SPEED) |
+ MII_CNTL_SPEED);
break;
case IF_PORT_AUI: /* AUI */
case IF_PORT_100BASEFX: /* 100BaseFx */
/* These Modes are not supported (are they?)*/
- printk(KERN_INFO "Not supported");
return -EOPNOTSUPP;
break;
default:
- printk(KERN_INFO "Invalid");
return -EINVAL;
}
}
u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */
int i, table_entries;
u32 rx_mode;
- u8 revision;
/* 635 Hash Table entires = 256(2^16) */
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- if((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV))
+ if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
+ (sis_priv->chipset_rev == SIS900B_900_REV))
table_entries = 16;
else
table_entries = 8;
for (i = 0; i < table_entries; i++)
mc_filter[i] = 0xffff;
} else {
- /* Accept Broadcast packet, destination address matchs our MAC address,
- use Receive Filter to reject unwanted MCAST packet */
+ /* Accept Broadcast packet, destination address matchs our
+ * MAC address, use Receive Filter to reject unwanted MCAST
+ * packets */
struct dev_mc_list *mclist;
rx_mode = RFAAB;
- for (i = 0, mclist = net_dev->mc_list; mclist && i < net_dev->mc_count;
- i++, mclist = mclist->next) {
+ for (i = 0, mclist = net_dev->mc_list;
+ mclist && i < net_dev->mc_count;
+ i++, mclist = mclist->next) {
unsigned int bit_nr =
- sis900_mcast_bitnr(mclist->dmi_addr, revision);
+ sis900_mcast_bitnr(mclist->dmi_addr, sis_priv->chipset_rev);
mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf));
}
}
outl(RFEN | rx_mode, ioaddr + rfcr);
- /* sis900 is capatable of looping back packet at MAC level for debugging purpose */
+ /* sis900 is capable of looping back packets at MAC level for
+ * debugging purpose */
if (net_dev->flags & IFF_LOOPBACK) {
u32 cr_saved;
/* We must disable Tx/Rx before setting loopback mode */
long ioaddr = net_dev->base_addr;
int i = 0;
u32 status = TxRCMP | RxRCMP;
- u8 revision;
outl(0, ioaddr + ier);
outl(0, ioaddr + imr);
status ^= (inl(isr + ioaddr) & status);
}
- pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision);
- if( (revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV) )
+ if( (sis_priv->chipset_rev >= SIS635A_900_REV) ||
+ (sis_priv->chipset_rev == SIS900B_900_REV) )
outl(PESEL | RND_CNT, ioaddr + cfg);
else
outl(PESEL, ioaddr + cfg);
#ifdef CONFIG_PM
-static int sis900_suspend(struct pci_dev *pci_dev, u32 state)
+static int sis900_suspend(struct pci_dev *pci_dev, pm_message_t state)
{
struct net_device *net_dev = pci_get_drvdata(pci_dev);
- struct sis900_private *sis_priv = net_dev->priv;
long ioaddr = net_dev->base_addr;
if(!netif_running(net_dev))
/* Stop the chip's Tx and Rx Status Machine */
outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
- pci_set_power_state(pci_dev, 3);
- pci_save_state(pci_dev, sis_priv->pci_state);
+ pci_set_power_state(pci_dev, PCI_D3hot);
+ pci_save_state(pci_dev);
return 0;
}
if(!netif_running(net_dev))
return 0;
- pci_restore_state(pci_dev, sis_priv->pci_state);
- pci_set_power_state(pci_dev, 0);
+ pci_restore_state(pci_dev);
+ pci_set_power_state(pci_dev, PCI_D0);
sis900_init_rxfilter(net_dev);
git://git.onelab.eu / linux-2.6.git / blobdiff