* <linux/slab.h>
* <linux/interrupt.h>
* <linux/pci.h>
+ * <linux/bitops.h>
* <asm/byteorder.h>
- * <asm/bitops.h>
* <asm/io.h>
* <linux/netdevice.h>
* <linux/etherdevice.h>
* "h/skgeinit.h"
* "h/skaddr.h"
* "h/skgesirq.h"
- * "h/skcsum.h"
* "h/skrlmt.h"
*
******************************************************************************/
#include "h/skversion.h"
+#include <linux/in.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/init.h>
-
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-#endif
+#include <linux/dma-mapping.h>
+#include <linux/ip.h>
#include "h/skdrv1st.h"
#include "h/skdrv2nd.h"
static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
static void GetConfiguration(SK_AC*);
-static void ProductStr(SK_AC*);
static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
static void FillRxRing(SK_AC*, RX_PORT*);
* Extern Function Prototypes
*
******************************************************************************/
-
-#ifdef CONFIG_PROC_FS
-static const char SK_Root_Dir_entry[] = "sk98lin";
-static struct proc_dir_entry *pSkRootDir = NULL;
-extern struct file_operations sk_proc_fops;
-#endif
-
extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);
extern void SkDimDisplayModerationSettings(SK_AC *pAC);
extern void SkDimStartModerationTimer(SK_AC *pAC);
extern void SkDimModerate(SK_AC *pAC);
+extern void SkGeBlinkTimer(unsigned long data);
#ifdef DEBUG
static void DumpMsg(struct sk_buff*, char*);
#endif
/* global variables *********************************************************/
-static const char *BootString = BOOT_STRING;
-struct SK_NET_DEVICE *SkGeRootDev = NULL;
-static int probed __initdata = 0;
static SK_BOOL DoPrintInterfaceChange = SK_TRUE;
+extern struct ethtool_ops SkGeEthtoolOps;
/* local variables **********************************************************/
static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}};
static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};
-
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *pSkRootDir;
-#endif
-
-
-
/*****************************************************************************
*
- * skge_probe - find all SK-98xx adapters
+ * SkPciWriteCfgDWord - write a 32 bit value to pci config space
*
* Description:
- * This function scans the PCI bus for SK-98xx adapters. Resources for
- * each adapter are allocated and the adapter is brought into Init 1
- * state.
+ * This routine writes a 32 bit value to the pci configuration
+ * space.
*
* Returns:
- * 0, if everything is ok
- * !=0, on error
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
*/
-static int __init skge_probe (void)
+static inline int SkPciWriteCfgDWord(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U32 Val) /* pointer to store the read value */
{
- int boards_found = 0;
- int vendor_flag = SK_FALSE;
- SK_AC *pAC;
- DEV_NET *pNet = NULL;
- struct pci_dev *pdev = NULL;
- struct SK_NET_DEVICE *dev = NULL;
- SK_BOOL DeviceFound = SK_FALSE;
- SK_BOOL BootStringCount = SK_FALSE;
- int retval;
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *pProcFile;
-#endif
-
- if (probed)
- return -ENODEV;
- probed++;
-
-
- while((pdev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET << 8, pdev))) {
-
- if (pci_enable_device(pdev)) {
- continue;
- }
- dev = NULL;
- pNet = NULL;
-
- /* Don't handle Yukon2 cards at the moment */
- /* 12-feb-2004 ---- mlindner@syskonnect.de */
- if (pdev->vendor == 0x11ab) {
- if ( (pdev->device == 0x4360) || (pdev->device == 0x4361) )
- continue;
- }
-
- SK_PCI_ISCOMPLIANT(vendor_flag, pdev);
- if (!vendor_flag)
- continue;
-
- /* Configure DMA attributes. */
- if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pdev, (u64) 0xffffffff))
- continue;
-
-
- if ((dev = alloc_etherdev(sizeof(DEV_NET))) == NULL) {
- printk(KERN_ERR "Unable to allocate etherdev "
- "structure!\n");
- break;
- }
-
- pNet = dev->priv;
- pNet->pAC = kmalloc(sizeof(SK_AC), GFP_KERNEL);
- if (pNet->pAC == NULL){
- free_netdev(dev);
- printk(KERN_ERR "Unable to allocate adapter "
- "structure!\n");
- break;
- }
-
- /* Print message */
- if (!BootStringCount) {
- /* set display flag to TRUE so that */
- /* we only display this string ONCE */
- BootStringCount = SK_TRUE;
- printk("%s\n", BootString);
- }
-
- memset(pNet->pAC, 0, sizeof(SK_AC));
- pAC = pNet->pAC;
- pAC->PciDev = pdev;
- pAC->PciDevId = pdev->device;
- pAC->dev[0] = dev;
- pAC->dev[1] = dev;
- sprintf(pAC->Name, "SysKonnect SK-98xx");
- pAC->CheckQueue = SK_FALSE;
-
- pNet->Mtu = 1500;
- pNet->Up = 0;
- dev->irq = pdev->irq;
- retval = SkGeInitPCI(pAC);
- if (retval) {
- printk("SKGE: PCI setup failed: %i\n", retval);
- free_netdev(dev);
- continue;
- }
-
- SET_MODULE_OWNER(dev);
- dev->open = &SkGeOpen;
- dev->stop = &SkGeClose;
- dev->hard_start_xmit = &SkGeXmit;
- dev->get_stats = &SkGeStats;
- dev->last_stats = &SkGeStats;
- dev->set_multicast_list = &SkGeSetRxMode;
- dev->set_mac_address = &SkGeSetMacAddr;
- dev->do_ioctl = &SkGeIoctl;
- dev->change_mtu = &SkGeChangeMtu;
- dev->flags &= ~IFF_RUNNING;
- SET_NETDEV_DEV(dev, &pdev->dev);
-
-#ifdef SK_ZEROCOPY
-#ifdef USE_SK_TX_CHECKSUM
-
- if (pAC->ChipsetType) {
- /* Use only if yukon hardware */
- /* SK and ZEROCOPY - fly baby... */
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- }
-#endif
-#endif
-
- pAC->Index = boards_found;
-
- if (SkGeBoardInit(dev, pAC)) {
- free_netdev(dev);
- continue;
- }
-
- /* Register net device */
- if (register_netdev(dev)) {
- printk(KERN_ERR "SKGE: Could not register device.\n");
- FreeResources(dev);
- free_netdev(dev);
- continue;
- }
-
- /* Print adapter specific string from vpd */
- ProductStr(pAC);
- printk("%s: %s\n", dev->name, pAC->DeviceStr);
-
- /* Print configuration settings */
- printk(" PrefPort:%c RlmtMode:%s\n",
- 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber,
- (pAC->RlmtMode==0) ? "Check Link State" :
- ((pAC->RlmtMode==1) ? "Check Link State" :
- ((pAC->RlmtMode==3) ? "Check Local Port" :
- ((pAC->RlmtMode==7) ? "Check Segmentation" :
- ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error")))));
-
- SkGeYellowLED(pAC, pAC->IoBase, 1);
-
-
- memcpy((caddr_t) &dev->dev_addr,
- (caddr_t) &pAC->Addr.Net[0].CurrentMacAddress, 6);
-
- /* First adapter... Create proc and print message */
-#ifdef CONFIG_PROC_FS
- if (!DeviceFound) {
- DeviceFound = SK_TRUE;
- SK_MEMCPY(&SK_Root_Dir_entry, BootString,
- sizeof(SK_Root_Dir_entry) - 1);
-
- /*Create proc (directory)*/
- if(!pSkRootDir) {
- pSkRootDir = proc_mkdir(SK_Root_Dir_entry, proc_net);
- if (!pSkRootDir) {
- printk(KERN_WARNING "%s: Unable to create /proc/net/%s",
- dev->name, SK_Root_Dir_entry);
- } else {
- pSkRootDir->owner = THIS_MODULE;
- }
- }
- }
-
- /* Create proc file */
- if (pSkRootDir &&
- (pProcFile = create_proc_entry(dev->name, S_IRUGO,
- pSkRootDir))) {
- pProcFile->proc_fops = &sk_proc_fops;
- pProcFile->data = dev;
- }
-
-#endif
-
- pNet->PortNr = 0;
- pNet->NetNr = 0;
-
- boards_found++;
-
- /* More then one port found */
- if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
- if ((dev = alloc_etherdev(sizeof(DEV_NET))) == 0) {
- printk(KERN_ERR "Unable to allocate etherdev "
- "structure!\n");
- break;
- }
-
- pAC->dev[1] = dev;
- pNet = dev->priv;
- pNet->PortNr = 1;
- pNet->NetNr = 1;
- pNet->pAC = pAC;
- pNet->Mtu = 1500;
- pNet->Up = 0;
-
- dev->open = &SkGeOpen;
- dev->stop = &SkGeClose;
- dev->hard_start_xmit = &SkGeXmit;
- dev->get_stats = &SkGeStats;
- dev->last_stats = &SkGeStats;
- dev->set_multicast_list = &SkGeSetRxMode;
- dev->set_mac_address = &SkGeSetMacAddr;
- dev->do_ioctl = &SkGeIoctl;
- dev->change_mtu = &SkGeChangeMtu;
- dev->flags &= ~IFF_RUNNING;
-
-#ifdef SK_ZEROCOPY
-#ifdef USE_SK_TX_CHECKSUM
- if (pAC->ChipsetType) {
- /* SG and ZEROCOPY - fly baby... */
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- }
-#endif
-#endif
-
- if (register_netdev(dev)) {
- printk(KERN_ERR "SKGE: Could not register device.\n");
- free_netdev(dev);
- pAC->dev[1] = pAC->dev[0];
- } else {
-#ifdef CONFIG_PROC_FS
- if (pSkRootDir
- && (pProcFile = create_proc_entry(dev->name,
- S_IRUGO, pSkRootDir))) {
- pProcFile->proc_fops = &sk_proc_fops;
- pProcFile->data = dev;
- }
-#endif
-
- memcpy((caddr_t) &dev->dev_addr,
- (caddr_t) &pAC->Addr.Net[1].CurrentMacAddress, 6);
-
- printk("%s: %s\n", dev->name, pAC->DeviceStr);
- printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
- }
- }
-
- /* Save the hardware revision */
- pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
- (pAC->GIni.GIPciHwRev & 0x0F);
-
- /* Set driver globals */
- pAC->Pnmi.pDriverFileName = DRIVER_FILE_NAME;
- pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE;
-
- SK_MEMSET(&(pAC->PnmiBackup), 0, sizeof(SK_PNMI_STRUCT_DATA));
- SK_MEMCPY(&(pAC->PnmiBackup), &(pAC->PnmiStruct),
- sizeof(SK_PNMI_STRUCT_DATA));
-
- /*
- * This is bollocks, but we need to tell the net-init
- * code that it shall go for the next device.
- */
-#ifndef MODULE
- dev->base_addr = 0;
-#endif
- }
-
- /*
- * If we're at this point we're going through skge_probe() for
- * the first time. Return success (0) if we've initialized 1
- * or more boards. Otherwise, return failure (-ENODEV).
- */
-
- return boards_found;
-} /* skge_probe */
-
+ pci_write_config_dword(pAC->PciDev, PciAddr, Val);
+ return(0);
+} /* SkPciWriteCfgDWord */
/*****************************************************************************
*
* Description:
* This function initialize the PCI resources and IO
*
- * Returns: N/A
- *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
*/
-int SkGeInitPCI(SK_AC *pAC)
+static __devinit int SkGeInitPCI(SK_AC *pAC)
{
struct SK_NET_DEVICE *dev = pAC->dev[0];
struct pci_dev *pdev = pAC->PciDev;
int retval;
- if (pci_enable_device(pdev) != 0) {
- return 1;
- }
-
dev->mem_start = pci_resource_start (pdev, 0);
pci_set_master(pdev);
- if (pci_request_regions(pdev, pAC->Name) != 0) {
- retval = 2;
- goto out_disable;
- }
+ retval = pci_request_regions(pdev, "sk98lin");
+ if (retval)
+ goto out;
#ifdef SK_BIG_ENDIAN
/*
/*
* Remap the regs into kernel space.
*/
- pAC->IoBase = (char*)ioremap_nocache(dev->mem_start, 0x4000);
-
- if (!pAC->IoBase){
- retval = 3;
+ pAC->IoBase = ioremap_nocache(dev->mem_start, 0x4000);
+ if (!pAC->IoBase) {
+ retval = -EIO;
goto out_release;
}
out_release:
pci_release_regions(pdev);
- out_disable:
- pci_disable_device(pdev);
+ out:
return retval;
}
DEV_NET *pNet;
SK_AC *pAC;
- if (dev->priv) {
- pNet = (DEV_NET*) dev->priv;
- pAC = pNet->pAC;
- AllocFlag = pAC->AllocFlag;
- if (pAC->PciDev) {
- pci_release_regions(pAC->PciDev);
- }
- if (AllocFlag & SK_ALLOC_IRQ) {
- free_irq(dev->irq, dev);
- }
- if (pAC->IoBase) {
- iounmap(pAC->IoBase);
- }
- if (pAC->pDescrMem) {
- BoardFreeMem(pAC);
- }
+ pNet = netdev_priv(dev);
+ pAC = pNet->pAC;
+ AllocFlag = pAC->AllocFlag;
+ if (pAC->PciDev) {
+ pci_release_regions(pAC->PciDev);
+ }
+ if (AllocFlag & SK_ALLOC_IRQ) {
+ free_irq(dev->irq, dev);
+ }
+ if (pAC->IoBase) {
+ iounmap(pAC->IoBase);
+ }
+ if (pAC->pDescrMem) {
+ BoardFreeMem(pAC);
}
} /* FreeResources */
MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver");
MODULE_LICENSE("GPL");
-MODULE_PARM(Speed_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(Speed_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(AutoNeg_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(AutoNeg_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(DupCap_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(DupCap_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(FlowCtrl_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(FlowCtrl_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(Role_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(Role_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(ConType, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(PrefPort, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(RlmtMode, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-/* not used, just there because every driver should have them: */
-MODULE_PARM(options, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "i");
-MODULE_PARM(debug, "i");
-/* used for interrupt moderation */
-MODULE_PARM(IntsPerSec, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "i");
-MODULE_PARM(Moderation, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(Stats, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(ModerationMask, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-MODULE_PARM(AutoSizing, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
-
#ifdef LINK_SPEED_A
static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED;
static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", };
#endif
-static int debug = 0; /* not used */
-static int options[SK_MAX_CARD_PARAM] = {0, }; /* not used */
-
static int IntsPerSec[SK_MAX_CARD_PARAM];
static char *Moderation[SK_MAX_CARD_PARAM];
static char *ModerationMask[SK_MAX_CARD_PARAM];
static char *AutoSizing[SK_MAX_CARD_PARAM];
static char *Stats[SK_MAX_CARD_PARAM];
-
-/*****************************************************************************
- *
- * skge_init_module - module initialization function
- *
- * Description:
- * Very simple, only call skge_probe and return approriate result.
- *
- * Returns:
- * 0, if everything is ok
- * !=0, on error
- */
-static int __init skge_init_module(void)
-{
- int cards;
- SkGeRootDev = NULL;
-
- /* just to avoid warnings ... */
- debug = 0;
- options[0] = 0;
-
- cards = skge_probe();
- if (cards == 0) {
- printk("sk98lin: No adapter found.\n");
- }
- return cards ? 0 : -ENODEV;
-} /* skge_init_module */
-
-
-/*****************************************************************************
- *
- * skge_cleanup_module - module unload function
- *
- * Description:
- * Disable adapter if it is still running, free resources,
- * free device struct.
- *
- * Returns: N/A
- */
-static void __exit skge_cleanup_module(void)
-{
-DEV_NET *pNet;
-SK_AC *pAC;
-struct SK_NET_DEVICE *next;
-unsigned long Flags;
-SK_EVPARA EvPara;
-
- while (SkGeRootDev) {
- pNet = (DEV_NET*) SkGeRootDev->priv;
- pAC = pNet->pAC;
- next = pAC->Next;
-
- netif_stop_queue(SkGeRootDev);
- SkGeYellowLED(pAC, pAC->IoBase, 0);
-
- if(pAC->BoardLevel == SK_INIT_RUN) {
- /* board is still alive */
- spin_lock_irqsave(&pAC->SlowPathLock, Flags);
- EvPara.Para32[0] = 0;
- EvPara.Para32[1] = -1;
- SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
- EvPara.Para32[0] = 1;
- EvPara.Para32[1] = -1;
- SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
- SkEventDispatcher(pAC, pAC->IoBase);
- /* disable interrupts */
- SK_OUT32(pAC->IoBase, B0_IMSK, 0);
- SkGeDeInit(pAC, pAC->IoBase);
- spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- pAC->BoardLevel = SK_INIT_DATA;
- /* We do NOT check here, if IRQ was pending, of course*/
- }
-
- if(pAC->BoardLevel == SK_INIT_IO) {
- /* board is still alive */
- SkGeDeInit(pAC, pAC->IoBase);
- pAC->BoardLevel = SK_INIT_DATA;
- }
-
- if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 2){
- unregister_netdev(pAC->dev[1]);
- free_netdev(pAC->dev[1]);
- }
-
- FreeResources(SkGeRootDev);
-
- SkGeRootDev->get_stats = NULL;
- /*
- * otherwise unregister_netdev calls get_stats with
- * invalid IO ... :-(
- */
- unregister_netdev(SkGeRootDev);
- free_netdev(SkGeRootDev);
- kfree(pAC);
- SkGeRootDev = next;
- }
-
-#ifdef CONFIG_PROC_FS
- /* clear proc-dir */
- remove_proc_entry(pSkRootDir->name, proc_net);
-#endif
-
-} /* skge_cleanup_module */
-
-module_init(skge_init_module);
-module_exit(skge_cleanup_module);
-
+module_param_array(Speed_A, charp, NULL, 0);
+module_param_array(Speed_B, charp, NULL, 0);
+module_param_array(AutoNeg_A, charp, NULL, 0);
+module_param_array(AutoNeg_B, charp, NULL, 0);
+module_param_array(DupCap_A, charp, NULL, 0);
+module_param_array(DupCap_B, charp, NULL, 0);
+module_param_array(FlowCtrl_A, charp, NULL, 0);
+module_param_array(FlowCtrl_B, charp, NULL, 0);
+module_param_array(Role_A, charp, NULL, 0);
+module_param_array(Role_B, charp, NULL, 0);
+module_param_array(ConType, charp, NULL, 0);
+module_param_array(PrefPort, charp, NULL, 0);
+module_param_array(RlmtMode, charp, NULL, 0);
+/* used for interrupt moderation */
+module_param_array(IntsPerSec, int, NULL, 0);
+module_param_array(Moderation, charp, NULL, 0);
+module_param_array(Stats, charp, NULL, 0);
+module_param_array(ModerationMask, charp, NULL, 0);
+module_param_array(AutoSizing, charp, NULL, 0);
/*****************************************************************************
*
* 0, if everything is ok
* !=0, on error
*/
-static int __init SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
+static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
{
short i;
unsigned long Flags;
}
spin_lock_init(&pAC->SlowPathLock);
+ /* setup phy_id blink timer */
+ pAC->BlinkTimer.function = SkGeBlinkTimer;
+ pAC->BlinkTimer.data = (unsigned long) dev;
+ init_timer(&pAC->BlinkTimer);
+
/* level 0 init common modules here */
spin_lock_irqsave(&pAC->SlowPathLock, Flags);
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) {
printk("HWInit (0) failed.\n");
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- return(-EAGAIN);
+ return -EIO;
}
SkI2cInit( pAC, pAC->IoBase, SK_INIT_DATA);
SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA);
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
printk("sk98lin: HWInit (1) failed.\n");
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- return(-EAGAIN);
+ return -EIO;
}
SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO);
SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
if (pAC->GIni.GIMacsFound == 2) {
- Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
} else if (pAC->GIni.GIMacsFound == 1) {
Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ,
- pAC->Name, dev);
+ "sk98lin", dev);
} else {
printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
pAC->GIni.GIMacsFound);
- return -EAGAIN;
+ return -EIO;
}
if (Ret) {
printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n",
dev->irq);
- return -EAGAIN;
+ return Ret;
}
pAC->AllocFlag |= SK_ALLOC_IRQ;
/* Alloc memory for this board (Mem for RxD/TxD) : */
if(!BoardAllocMem(pAC)) {
printk("No memory for descriptor rings.\n");
- return(-EAGAIN);
+ return -ENOMEM;
}
- SkCsSetReceiveFlags(pAC,
- SKCS_PROTO_IP | SKCS_PROTO_TCP | SKCS_PROTO_UDP,
- &pAC->CsOfs1, &pAC->CsOfs2, 0);
- pAC->CsOfs = (pAC->CsOfs2 << 16) | pAC->CsOfs1;
-
BoardInitMem(pAC);
/* tschilling: New common function with minimum size check. */
DualNet = SK_FALSE;
DualNet)) {
BoardFreeMem(pAC);
printk("sk98lin: SkGeInitAssignRamToQueues failed.\n");
- return(-EAGAIN);
+ return -EIO;
}
- /*
- * Register the device here
- */
- pAC->Next = SkGeRootDev;
- SkGeRootDev = dev;
-
return (0);
} /* SkGeBoardInit */
* SK_TRUE, if all memory could be allocated
* SK_FALSE, if not
*/
-static SK_BOOL BoardAllocMem(
-SK_AC *pAC)
+static __devinit SK_BOOL BoardAllocMem(SK_AC *pAC)
{
caddr_t pDescrMem; /* pointer to descriptor memory area */
size_t AllocLength; /* length of complete descriptor area */
*
* Returns: N/A
*/
-static void BoardInitMem(
-SK_AC *pAC) /* pointer to adapter context */
+static __devinit void BoardInitMem(SK_AC *pAC)
{
int i; /* loop counter */
int RxDescrSize; /* the size of a rx descriptor rounded up to alignment*/
/* set the pointers right */
pDescr->VNextRxd = VNextDescr & 0xffffffffULL;
pDescr->pNextRxd = pNextDescr;
- pDescr->TcpSumStarts = pAC->CsOfs;
+ if (!IsTx) pDescr->TcpSumStarts = ETH_HLEN << 16 | ETH_HLEN;
/* advance one step */
pPrevDescr = pDescr;
SK_AC *pAC;
SK_U32 IntSrc; /* interrupts source register contents */
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
/*
SK_AC *pAC;
SK_U32 IntSrc; /* interrupts source register contents */
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
/*
return SkIsrRetHandled;
} /* SkGeIsrOnePort */
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/****************************************************************************
+ *
+ * SkGePollController - polling receive, for netconsole
+ *
+ * Description:
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ *
+ * Returns: N/A
+ */
+static void SkGePollController(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ SkGeIsr(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
/****************************************************************************
*
int i;
SK_EVPARA EvPara; /* an event parameter union */
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
}
#endif
- if (!try_module_get(THIS_MODULE)) {
- return (-1); /* increase of usage count not possible */
- }
-
/* Set blink mode */
if ((pAC->PciDev->vendor == 0x1186) || (pAC->PciDev->vendor == 0x11ab ))
pAC->GIni.GILedBlinkCtrl = OEM_CONFIG_VALUE;
if (pAC->BoardLevel == SK_INIT_DATA) {
/* level 1 init common modules here */
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
- module_put(THIS_MODULE); /* decrease usage count */
printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name);
return (-1);
}
if (pAC->BoardLevel != SK_INIT_RUN) {
/* tschilling: Level 2 init modules here, check return value. */
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_RUN) != 0) {
- module_put(THIS_MODULE); /* decrease usage count */
printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name);
return (-1);
}
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
pAC->MaxPorts++;
- pNet->Up = 1;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
("SkGeClose: pAC=0x%lX ", (unsigned long)pAC));
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
#ifdef SK_DIAG_SUPPORT
if (pAC->DiagModeActive == DIAG_ACTIVE) {
if (pAC->DiagFlowCtrl == SK_FALSE) {
- module_put(THIS_MODULE);
/*
** notify that the interface which has been closed
** by operator interaction must not be started up
** again when the DIAG has finished.
*/
- newPtrNet = (DEV_NET *) pAC->dev[0]->priv;
+ newPtrNet = netdev_priv(pAC->dev[0]);
if (newPtrNet == pNet) {
pAC->WasIfUp[0] = SK_FALSE;
} else {
sizeof(SK_PNMI_STRUCT_DATA));
pAC->MaxPorts--;
- pNet->Up = 0;
- module_put(THIS_MODULE);
return (0);
} /* SkGeClose */
SK_AC *pAC;
int Rc; /* return code of XmitFrame */
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
if ((!skb_shinfo(skb)->nr_frags) ||
TXD *pOldTxd;
unsigned long Flags;
SK_U64 PhysAddr;
- int Protocol;
- int IpHeaderLength;
int BytesSend = pMessage->len;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X"));
*/
if (BytesSend < C_LEN_ETHERNET_MINSIZE) {
if ((pMessage = skb_padto(pMessage, C_LEN_ETHERNET_MINSIZE)) == NULL) {
+ spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
return 0;
}
pMessage->len = C_LEN_ETHERNET_MINSIZE;
pTxd->pMBuf = pMessage;
if (pMessage->ip_summed == CHECKSUM_HW) {
- Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff);
- if ((Protocol == C_PROTO_ID_UDP) &&
+ u16 hdrlen = pMessage->h.raw - pMessage->data;
+ u16 offset = hdrlen + pMessage->csum;
+
+ if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) &&
(pAC->GIni.GIChipRev == 0) &&
(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
pTxd->TBControl = BMU_TCP_CHECK;
pTxd->TBControl = BMU_UDP_CHECK;
}
- IpHeaderLength = (SK_U8)pMessage->data[C_OFFSET_IPHEADER];
- IpHeaderLength = (IpHeaderLength & 0xf) * 4;
- pTxd->TcpSumOfs = 0; /* PH-Checksum already calculated */
- pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength +
- (Protocol == C_PROTO_ID_UDP ?
- C_OFFSET_UDPHEADER_UDPCS :
- C_OFFSET_TCPHEADER_TCPCS);
- pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength;
+ pTxd->TcpSumOfs = 0;
+ pTxd->TcpSumSt = hdrlen;
+ pTxd->TcpSumWr = offset;
pTxd->TBControl |= BMU_OWN | BMU_STF |
BMU_SW | BMU_EOF |
TXD *pTxdLst;
int CurrFrag;
int BytesSend;
- int IpHeaderLength;
- int Protocol;
skb_frag_t *sk_frag;
SK_U64 PhysAddr;
unsigned long Flags;
+ SK_U32 Control;
spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
#ifndef USE_TX_COMPLETE
pTxdFst = pTxd;
pTxdLst = pTxd;
BytesSend = 0;
- Protocol = 0;
/*
** Map the first fragment (header) into the DMA-space
** Does the HW need to evaluate checksum for TCP or UDP packets?
*/
if (pMessage->ip_summed == CHECKSUM_HW) {
- pTxd->TBControl = BMU_STF | BMU_STFWD | skb_headlen(pMessage);
+ u16 hdrlen = pMessage->h.raw - pMessage->data;
+ u16 offset = hdrlen + pMessage->csum;
+
+ Control = BMU_STFWD;
+
/*
** We have to use the opcode for tcp here, because the
** opcode for udp is not working in the hardware yet
** (Revision 2.0)
*/
- Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff);
- if ((Protocol == C_PROTO_ID_UDP) &&
+ if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) &&
(pAC->GIni.GIChipRev == 0) &&
(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
- pTxd->TBControl |= BMU_TCP_CHECK;
+ Control |= BMU_TCP_CHECK;
} else {
- pTxd->TBControl |= BMU_UDP_CHECK;
+ Control |= BMU_UDP_CHECK;
}
- IpHeaderLength = ((SK_U8)pMessage->data[C_OFFSET_IPHEADER] & 0xf)*4;
- pTxd->TcpSumOfs = 0; /* PH-Checksum already claculated */
- pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength +
- (Protocol == C_PROTO_ID_UDP ?
- C_OFFSET_UDPHEADER_UDPCS :
- C_OFFSET_TCPHEADER_TCPCS);
- pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength;
- } else {
- pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_STF |
- skb_headlen(pMessage);
- }
+ pTxd->TcpSumOfs = 0;
+ pTxd->TcpSumSt = hdrlen;
+ pTxd->TcpSumWr = offset;
+ } else
+ Control = BMU_CHECK | BMU_SW;
+
+ pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage);
pTxd = pTxd->pNextTxd;
pTxPort->TxdRingFree--;
pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
pTxd->pMBuf = pMessage;
- /*
- ** Does the HW need to evaluate checksum for TCP or UDP packets?
- */
- if (pMessage->ip_summed == CHECKSUM_HW) {
- pTxd->TBControl = BMU_OWN | BMU_SW | BMU_STFWD;
- /*
- ** We have to use the opcode for tcp here because the
- ** opcode for udp is not working in the hardware yet
- ** (revision 2.0)
- */
- if ((Protocol == C_PROTO_ID_UDP) &&
- (pAC->GIni.GIChipRev == 0) &&
- (pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
- pTxd->TBControl |= BMU_TCP_CHECK;
- } else {
- pTxd->TBControl |= BMU_UDP_CHECK;
- }
- } else {
- pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_OWN;
- }
+ pTxd->TBControl = Control | BMU_OWN | sk_frag->size;
/*
** Do we have the last fragment?
*/
if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags ) {
#ifdef USE_TX_COMPLETE
- pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF | sk_frag->size;
+ pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF;
#else
- pTxd->TBControl |= BMU_EOF | sk_frag->size;
+ pTxd->TBControl |= BMU_EOF;
#endif
pTxdFst->TBControl |= BMU_OWN | BMU_SW;
-
- } else {
- pTxd->TBControl |= sk_frag->size;
}
pTxdLst = pTxd;
pTxd = pTxd->pNextTxd;
struct sk_buff *pMsg; /* pointer to message holding frame */
struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */
int FrameLength; /* total length of received frame */
-int IpFrameLength;
SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */
SK_EVPARA EvPara; /* an event parameter union */
unsigned long Flags; /* for spin lock */
SK_BOOL IsBadFrame; /* Bad frame */
SK_U32 FrameStat;
-unsigned short Csum1;
-unsigned short Csum2;
-unsigned short Type;
-int Result;
SK_U64 PhysAddr;
rx_start:
(dma_addr_t) PhysAddr,
FrameLength,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(pNewMsg, pMsg->data,
- FrameLength, 0);
+ memcpy(pNewMsg->data, pMsg, FrameLength);
+
pci_dma_sync_single_for_device(pAC->PciDev,
(dma_addr_t) PhysAddr,
FrameLength,
/* set length in message */
skb_put(pMsg, FrameLength);
- /* hardware checksum */
- Type = ntohs(*((short*)&pMsg->data[12]));
+ } /* frame > SK_COPY_TRESHOLD */
#ifdef USE_SK_RX_CHECKSUM
- if (Type == 0x800) {
- Csum1=le16_to_cpu(pRxd->TcpSums & 0xffff);
- Csum2=le16_to_cpu((pRxd->TcpSums >> 16) & 0xffff);
- IpFrameLength = (int) ntohs((unsigned short)
- ((unsigned short *) pMsg->data)[8]);
-
- /*
- * Test: If frame is padded, a check is not possible!
- * Frame not padded? Length difference must be 14 (0xe)!
- */
- if ((FrameLength - IpFrameLength) != 0xe) {
- /* Frame padded => TCP offload not possible! */
- pMsg->ip_summed = CHECKSUM_NONE;
- } else {
- /* Frame not padded => TCP offload! */
- if ((((Csum1 & 0xfffe) && (Csum2 & 0xfffe)) &&
- (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) ||
- (pAC->ChipsetType)) {
- Result = SkCsGetReceiveInfo(pAC,
- &pMsg->data[14],
- Csum1, Csum2, pRxPort->PortIndex);
- if (Result ==
- SKCS_STATUS_IP_FRAGMENT ||
- Result ==
- SKCS_STATUS_IP_CSUM_OK ||
- Result ==
- SKCS_STATUS_TCP_CSUM_OK ||
- Result ==
- SKCS_STATUS_UDP_CSUM_OK) {
- pMsg->ip_summed =
- CHECKSUM_UNNECESSARY;
- }
- else if (Result ==
- SKCS_STATUS_TCP_CSUM_ERROR ||
- Result ==
- SKCS_STATUS_UDP_CSUM_ERROR ||
- Result ==
- SKCS_STATUS_IP_CSUM_ERROR_UDP ||
- Result ==
- SKCS_STATUS_IP_CSUM_ERROR_TCP ||
- Result ==
- SKCS_STATUS_IP_CSUM_ERROR ) {
- /* HW Checksum error */
- SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
- SK_DBGCAT_DRV_RX_PROGRESS,
- ("skge: CRC error. Frame dropped!\n"));
- goto rx_failed;
- } else {
- pMsg->ip_summed =
- CHECKSUM_NONE;
- }
- }/* checksumControl calculation valid */
- } /* Frame length check */
- } /* IP frame */
+ pMsg->csum = pRxd->TcpSums & 0xffff;
+ pMsg->ip_summed = CHECKSUM_HW;
#else
- pMsg->ip_summed = CHECKSUM_NONE;
+ pMsg->ip_summed = CHECKSUM_NONE;
#endif
- } /* frame > SK_COPY_TRESHOLD */
-
+
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V"));
ForRlmt = SK_RLMT_RX_PROTOCOL;
#if 0
static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p)
{
-DEV_NET *pNet = (DEV_NET*) dev->priv;
+DEV_NET *pNet = netdev_priv(dev);
SK_AC *pAC = pNet->pAC;
struct sockaddr *addr = p;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
("SkGeSetRxMode starts now... "));
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
if (pAC->RlmtNets == 1)
PortIdx = pAC->ActivePort;
static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu)
{
DEV_NET *pNet;
-DEV_NET *pOtherNet;
+struct net_device *pOtherDev;
SK_AC *pAC;
unsigned long Flags;
int i;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
("SkGeChangeMtu starts now...\n"));
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) {
}
#endif
- pNet->Mtu = NewMtu;
- pOtherNet = (DEV_NET*)pAC->dev[1 - pNet->NetNr]->priv;
- if ((pOtherNet->Mtu>1500) && (NewMtu<=1500) && (pOtherNet->Up==1)) {
- return(0);
- }
+ pOtherDev = pAC->dev[1 - pNet->NetNr];
+
+ if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500)
+ && (NewMtu <= 1500))
+ return 0;
pAC->RxBufSize = NewMtu + 32;
dev->mtu = NewMtu;
SkEventDispatcher(pAC, pAC->IoBase);
for (i=0; i<pAC->GIni.GIMacsFound; i++) {
- spin_lock_irqsave(
- &pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_lock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock);
netif_stop_queue(pAC->dev[i]);
}
EvPara.Para32[1] = -1;
SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
- if (pOtherNet->Up) {
+ if (netif_running(pOtherDev)) {
+ DEV_NET *pOtherNet = netdev_priv(pOtherDev);
EvPara.Para32[0] = pOtherNet->PortNr;
SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
}
*/
static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev)
{
-DEV_NET *pNet = (DEV_NET*) dev->priv;
+DEV_NET *pNet = netdev_priv(dev);
SK_AC *pAC = pNet->pAC;
SK_PNMI_STRUCT_DATA *pPnmiStruct; /* structure for all Pnmi-Data */
SK_PNMI_STAT *pPnmiStat; /* pointer to virtual XMAC stat. data */
pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts;
pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts;
- if (pNet->Mtu <= 1500) {
+ if (dev->mtu <= 1500) {
pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF;
} else {
pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts -
* Description:
* This function is called if an ioctl is issued on the device.
* There are three subfunction for reading, writing and test-writing
- * the private MIB data structure (usefull for SysKonnect-internal tools).
+ * the private MIB data structure (useful for SysKonnect-internal tools).
*
* Returns:
* 0, if everything is ok
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
("SkGeIoctl starts now...\n"));
- pNet = (DEV_NET*) dev->priv;
+ pNet = netdev_priv(dev);
pAC = pNet->pAC;
if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) {
*/
* ((SK_U32 *)pMemBuf) = 0;
* ((SK_U32 *)pMemBuf + 1) = pdev->bus->number;
- * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pdev->slot_name);
+ * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev));
if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) {
Err = -EFAULT;
goto fault_diag;
*
* Returns: N/A
*/
-static void ProductStr(
-SK_AC *pAC /* pointer to adapter context */
+static inline int ProductStr(
+ SK_AC *pAC, /* pointer to adapter context */
+ char *DeviceStr, /* result string */
+ int StrLen /* length of the string */
)
{
-int StrLen = 80; /* length of the string, defined in SK_AC */
char Keyword[] = VPD_NAME; /* vpd productname identifier */
int ReturnCode; /* return code from vpd_read */
unsigned long Flags;
spin_lock_irqsave(&pAC->SlowPathLock, Flags);
- ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, pAC->DeviceStr,
- &StrLen);
+ ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen);
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- if (ReturnCode != 0) {
- /* there was an error reading the vpd data */
- SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
- ("Error reading VPD data: %d\n", ReturnCode));
- pAC->DeviceStr[0] = '\0';
- }
+
+ return ReturnCode;
} /* ProductStr */
/*****************************************************************************
} /* SkPciReadCfgByte */
-/*****************************************************************************
- *
- * SkPciWriteCfgDWord - write a 32 bit value to pci config space
- *
- * Description:
- * This routine writes a 32 bit value to the pci configuration
- * space.
- *
- * Returns:
- * 0 - indicate everything worked ok.
- * != 0 - error indication
- */
-int SkPciWriteCfgDWord(
-SK_AC *pAC, /* Adapter Control structure pointer */
-int PciAddr, /* PCI register address */
-SK_U32 Val) /* pointer to store the read value */
-{
- pci_write_config_dword(pAC->PciDev, PciAddr, Val);
- return(0);
-} /* SkPciWriteCfgDWord */
-
-
/*****************************************************************************
*
* SkPciWriteCfgWord - write a 16 bit value to pci config space
Flags);
SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST);
- pAC->dev[Param.Para32[0]]->flags &= ~IFF_RUNNING;
+ netif_carrier_off(pAC->dev[Param.Para32[0]]);
spin_unlock_irqrestore(
&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
Flags);
Flags);
break;
case SK_DRV_NET_UP: /* SK_U32 PortIdx */
+ { struct net_device *dev = pAC->dev[Param.Para32[0]];
/* action list 5 */
FromPort = Param.Para32[0];
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
printk(" irq moderation: disabled\n");
-#ifdef SK_ZEROCOPY
- if (pAC->ChipsetType)
-#ifdef USE_SK_TX_CHECKSUM
- printk(" scatter-gather: enabled\n");
-#else
- printk(" tx-checksum: disabled\n");
-#endif
- else
- printk(" scatter-gather: disabled\n");
-#else
- printk(" scatter-gather: disabled\n");
-#endif
-
-#ifndef USE_SK_RX_CHECKSUM
- printk(" rx-checksum: disabled\n");
-#endif
+ printk(" scatter-gather: %s\n",
+ (dev->features & NETIF_F_SG) ? "enabled" : "disabled");
+ printk(" tx-checksum: %s\n",
+ (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled");
+ printk(" rx-checksum: %s\n",
+ pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled");
} else {
DoPrintInterfaceChange = SK_TRUE;
}
/* Inform the world that link protocol is up. */
- pAC->dev[Param.Para32[0]]->flags |= IFF_RUNNING;
-
+ netif_carrier_on(dev);
break;
+ }
case SK_DRV_NET_DOWN: /* SK_U32 Reason */
/* action list 7 */
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
} else {
DoPrintInterfaceChange = SK_TRUE;
}
- pAC->dev[Param.Para32[1]]->flags &= ~IFF_RUNNING;
+ netif_carrier_off(pAC->dev[Param.Para32[1]]);
break;
case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
spin_lock_irqsave(
&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
Flags);
- spin_lock_irqsave(
- &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST);
SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST);
- spin_unlock_irqrestore(
- &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
spin_unlock_irqrestore(
&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
Flags);
spin_lock_irqsave(
&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
Flags);
- spin_lock_irqsave(
- &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
pAC->ActivePort = ToPort;
#if 0
SetQueueSizes(pAC);
pAC,
pAC->ActivePort,
DualNet)) {
- spin_unlock_irqrestore(
- &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
spin_unlock_irqrestore(
&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
Flags);
SkGePollTxD(pAC, IoC, ToPort, SK_TRUE);
ClearAndStartRx(pAC, FromPort);
ClearAndStartRx(pAC, ToPort);
- spin_unlock_irqrestore(
- &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
+ spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
spin_unlock_irqrestore(
&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
Flags);
int SkDrvEnterDiagMode(
SK_AC *pAc) /* pointer to adapter context */
{
- SK_AC *pAC = NULL;
- DEV_NET *pNet = NULL;
-
- pNet = (DEV_NET *) pAc->dev[0]->priv;
- pAC = pNet->pAC;
+ DEV_NET *pNet = netdev_priv(pAc->dev[0]);
+ SK_AC *pAC = pNet->pAC;
SK_MEMCPY(&(pAc->PnmiBackup), &(pAc->PnmiStruct),
sizeof(SK_PNMI_STRUCT_DATA));
pAC->DiagModeActive = DIAG_ACTIVE;
if (pAC->BoardLevel > SK_INIT_DATA) {
- if (pNet->Up) {
+ if (netif_running(pAC->dev[0])) {
pAC->WasIfUp[0] = SK_TRUE;
pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
DoPrintInterfaceChange = SK_FALSE;
} else {
pAC->WasIfUp[0] = SK_FALSE;
}
- if (pNet != (DEV_NET *) pAc->dev[1]->priv) {
- pNet = (DEV_NET *) pAc->dev[1]->priv;
- if (pNet->Up) {
+ if (pNet != netdev_priv(pAC->dev[1])) {
+ pNet = netdev_priv(pAC->dev[1]);
+ if (netif_running(pAC->dev[1])) {
pAC->WasIfUp[1] = SK_TRUE;
pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
DoPrintInterfaceChange = SK_FALSE;
dev = pAC->dev[devNbr];
- /*
- ** Function SkGeClose() uses MOD_DEC_USE_COUNT (2.2/2.4)
- ** or module_put() (2.6) to decrease the number of users for
- ** a device, but if a device is to be put under control of
- ** the DIAG, that count is OK already and does not need to
- ** be adapted! Hence the opposite MOD_INC_USE_COUNT or
- ** try_module_get() needs to be used again to correct that.
+ /* On Linux 2.6 the network driver does NOT mess with reference
+ ** counts. The driver MUST be able to be unloaded at any time
+ ** due to the possibility of hotplug.
*/
- if (!try_module_get(THIS_MODULE)) {
- return (-1);
- }
-
if (SkGeClose(dev) != 0) {
- module_put(THIS_MODULE);
return (-1);
}
return (0);
if (SkGeOpen(dev) != 0) {
return (-1);
- } else {
- /*
- ** Function SkGeOpen() uses MOD_INC_USE_COUNT (2.2/2.4)
- ** or try_module_get() (2.6) to increase the number of
- ** users for a device, but if a device was just under
- ** control of the DIAG, that count is OK already and
- ** does not need to be adapted! Hence the opposite
- ** MOD_DEC_USE_COUNT or module_put() needs to be used
- ** again to correct that.
- */
- module_put(THIS_MODULE);
}
/*
#endif
-/*******************************************************************************
- *
- * End of file
- *
- ******************************************************************************/
+static int __devinit skge_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ SK_AC *pAC;
+ DEV_NET *pNet = NULL;
+ struct net_device *dev = NULL;
+ static int boards_found = 0;
+ int error = -ENODEV;
+ int using_dac = 0;
+ char DeviceStr[80];
+
+ if (pci_enable_device(pdev))
+ goto out;
+
+ /* Configure DMA attributes. */
+ if (sizeof(dma_addr_t) > sizeof(u32) &&
+ !(error = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+ using_dac = 1;
+ error = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (error < 0) {
+ printk(KERN_ERR "sk98lin %s unable to obtain 64 bit DMA "
+ "for consistent allocations\n", pci_name(pdev));
+ goto out_disable_device;
+ }
+ } else {
+ error = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (error) {
+ printk(KERN_ERR "sk98lin %s no usable DMA configuration\n",
+ pci_name(pdev));
+ goto out_disable_device;
+ }
+ }
+
+ error = -ENOMEM;
+ dev = alloc_etherdev(sizeof(DEV_NET));
+ if (!dev) {
+ printk(KERN_ERR "sk98lin: unable to allocate etherdev "
+ "structure!\n");
+ goto out_disable_device;
+ }
+
+ pNet = netdev_priv(dev);
+ pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL);
+ if (!pNet->pAC) {
+ printk(KERN_ERR "sk98lin: unable to allocate adapter "
+ "structure!\n");
+ goto out_free_netdev;
+ }
+
+ pAC = pNet->pAC;
+ pAC->PciDev = pdev;
+
+ pAC->dev[0] = dev;
+ pAC->dev[1] = dev;
+ pAC->CheckQueue = SK_FALSE;
+
+ dev->irq = pdev->irq;
+
+ error = SkGeInitPCI(pAC);
+ if (error) {
+ printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error);
+ goto out_free_netdev;
+ }
+
+ SET_MODULE_OWNER(dev);
+ dev->open = &SkGeOpen;
+ dev->stop = &SkGeClose;
+ dev->hard_start_xmit = &SkGeXmit;
+ dev->get_stats = &SkGeStats;
+ dev->set_multicast_list = &SkGeSetRxMode;
+ dev->set_mac_address = &SkGeSetMacAddr;
+ dev->do_ioctl = &SkGeIoctl;
+ dev->change_mtu = &SkGeChangeMtu;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &SkGePollController;
+#endif
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
+
+ /* Use only if yukon hardware */
+ if (pAC->ChipsetType) {
+#ifdef USE_SK_TX_CHECKSUM
+ dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+ dev->features |= NETIF_F_SG;
+#endif
+#ifdef USE_SK_RX_CHECKSUM
+ pAC->RxPort[0].RxCsum = 1;
+#endif
+ }
+
+ if (using_dac)
+ dev->features |= NETIF_F_HIGHDMA;
+
+ pAC->Index = boards_found++;
+
+ error = SkGeBoardInit(dev, pAC);
+ if (error)
+ goto out_free_netdev;
+
+ /* Read Adapter name from VPD */
+ if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) {
+ error = -EIO;
+ printk(KERN_ERR "sk98lin: Could not read VPD data.\n");
+ goto out_free_resources;
+ }
+
+ /* Register net device */
+ error = register_netdev(dev);
+ if (error) {
+ printk(KERN_ERR "sk98lin: Could not register device.\n");
+ goto out_free_resources;
+ }
+
+ /* Print adapter specific string from vpd */
+ printk("%s: %s\n", dev->name, DeviceStr);
+
+ /* Print configuration settings */
+ printk(" PrefPort:%c RlmtMode:%s\n",
+ 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber,
+ (pAC->RlmtMode==0) ? "Check Link State" :
+ ((pAC->RlmtMode==1) ? "Check Link State" :
+ ((pAC->RlmtMode==3) ? "Check Local Port" :
+ ((pAC->RlmtMode==7) ? "Check Segmentation" :
+ ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error")))));
+
+ SkGeYellowLED(pAC, pAC->IoBase, 1);
+
+ memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ pNet->PortNr = 0;
+ pNet->NetNr = 0;
+
+ boards_found++;
+
+ pci_set_drvdata(pdev, dev);
+
+ /* More then one port found */
+ if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+ dev = alloc_etherdev(sizeof(DEV_NET));
+ if (!dev) {
+ printk(KERN_ERR "sk98lin: unable to allocate etherdev "
+ "structure!\n");
+ goto single_port;
+ }
+
+ pNet = netdev_priv(dev);
+ pNet->PortNr = 1;
+ pNet->NetNr = 1;
+ pNet->pAC = pAC;
+
+ dev->open = &SkGeOpen;
+ dev->stop = &SkGeClose;
+ dev->hard_start_xmit = &SkGeXmit;
+ dev->get_stats = &SkGeStats;
+ dev->set_multicast_list = &SkGeSetRxMode;
+ dev->set_mac_address = &SkGeSetMacAddr;
+ dev->do_ioctl = &SkGeIoctl;
+ dev->change_mtu = &SkGeChangeMtu;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
+
+ if (pAC->ChipsetType) {
+#ifdef USE_SK_TX_CHECKSUM
+ dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+ dev->features |= NETIF_F_SG;
+#endif
+#ifdef USE_SK_RX_CHECKSUM
+ pAC->RxPort[1].RxCsum = 1;
+#endif
+ }
+
+ if (using_dac)
+ dev->features |= NETIF_F_HIGHDMA;
+
+ error = register_netdev(dev);
+ if (error) {
+ printk(KERN_ERR "sk98lin: Could not register device"
+ " for second port. (%d)\n", error);
+ free_netdev(dev);
+ goto single_port;
+ }
+
+ pAC->dev[1] = dev;
+ memcpy(&dev->dev_addr,
+ &pAC->Addr.Net[1].CurrentMacAddress, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ printk("%s: %s\n", dev->name, DeviceStr);
+ printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
+ }
+
+single_port:
+
+ /* Save the hardware revision */
+ pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
+ (pAC->GIni.GIPciHwRev & 0x0F);
+
+ /* Set driver globals */
+ pAC->Pnmi.pDriverFileName = DRIVER_FILE_NAME;
+ pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE;
+
+ memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA));
+ memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA));
+
+ return 0;
+
+ out_free_resources:
+ FreeResources(dev);
+ out_free_netdev:
+ free_netdev(dev);
+ out_disable_device:
+ pci_disable_device(pdev);
+ out:
+ return error;
+}
+
+static void __devexit skge_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+ struct net_device *otherdev = pAC->dev[1];
+
+ unregister_netdev(dev);
+
+ SkGeYellowLED(pAC, pAC->IoBase, 0);
+
+ if (pAC->BoardLevel == SK_INIT_RUN) {
+ SK_EVPARA EvPara;
+ unsigned long Flags;
+
+ /* board is still alive */
+ spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+ EvPara.Para32[0] = 0;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ EvPara.Para32[0] = 1;
+ EvPara.Para32[1] = -1;
+ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+ SkEventDispatcher(pAC, pAC->IoBase);
+ /* disable interrupts */
+ SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+ SkGeDeInit(pAC, pAC->IoBase);
+ spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+ pAC->BoardLevel = SK_INIT_DATA;
+ /* We do NOT check here, if IRQ was pending, of course*/
+ }
+
+ if (pAC->BoardLevel == SK_INIT_IO) {
+ /* board is still alive */
+ SkGeDeInit(pAC, pAC->IoBase);
+ pAC->BoardLevel = SK_INIT_DATA;
+ }
+
+ FreeResources(dev);
+ free_netdev(dev);
+ if (otherdev != dev)
+ free_netdev(otherdev);
+ kfree(pAC);
+}
+
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+ struct net_device *otherdev = pAC->dev[1];
+
+ if (netif_running(dev)) {
+ netif_carrier_off(dev);
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */
+ netif_device_detach(dev);
+ }
+ if (otherdev != dev) {
+ if (netif_running(otherdev)) {
+ netif_carrier_off(otherdev);
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvDeInitAdapter(pAC, 1); /* performs SkGeClose */
+ netif_device_detach(otherdev);
+ }
+ }
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+ if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+ free_irq(dev->irq, dev);
+ }
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+ struct net_device *otherdev = pAC->dev[1];
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+ if (pAC->GIni.GIMacsFound == 2)
+ ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
+ else
+ ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, "sk98lin", dev);
+ if (ret) {
+ printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
+ pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+ dev->irq = 0;
+ pci_disable_device(pdev);
+ return -EBUSY;
+ }
+
+ netif_device_attach(dev);
+ if (netif_running(dev)) {
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvInitAdapter(pAC, 0); /* first device */
+ }
+ if (otherdev != dev) {
+ netif_device_attach(otherdev);
+ if (netif_running(otherdev)) {
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvInitAdapter(pAC, 1); /* second device */
+ }
+ }
+
+ return 0;
+}
+#else
+#define skge_suspend NULL
+#define skge_resume NULL
+#endif
+
+static struct pci_device_id skge_pci_tbl[] = {
+ { PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_SYSKONNECT, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_SYSKONNECT, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+/* DLink card does not have valid VPD so this driver gags
+ * { PCI_VENDOR_ID_DLINK, 0x4c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ */
+ { PCI_VENDOR_ID_MARVELL, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_MARVELL, 0x5005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_CNET, 0x434e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, },
+ { PCI_VENDOR_ID_LINKSYS, 0x1064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, skge_pci_tbl);
+
+static struct pci_driver skge_driver = {
+ .name = "sk98lin",
+ .id_table = skge_pci_tbl,
+ .probe = skge_probe_one,
+ .remove = __devexit_p(skge_remove_one),
+ .suspend = skge_suspend,
+ .resume = skge_resume,
+};
+
+static int __init skge_init(void)
+{
+ return pci_module_init(&skge_driver);
+}
+
+static void __exit skge_exit(void)
+{
+ pci_unregister_driver(&skge_driver);
+}
+
+module_init(skge_init);
+module_exit(skge_exit);