--- /dev/null
+/*
+ * smc91x.c
+ * This is a driver for SMSC's 91C9x/91C1xx single-chip Ethernet devices.
+ *
+ * Copyright (C) 1996 by Erik Stahlman
+ * Copyright (C) 2001 Standard Microsystems Corporation
+ * Developed by Simple Network Magic Corporation
+ * Copyright (C) 2003 Monta Vista Software, Inc.
+ * Unified SMC91x driver by Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Arguments:
+ * io = for the base address
+ * irq = for the IRQ
+ * nowait = 0 for normal wait states, 1 eliminates additional wait states
+ *
+ * original author:
+ * Erik Stahlman <erik@vt.edu>
+ *
+ * hardware multicast code:
+ * Peter Cammaert <pc@denkart.be>
+ *
+ * contributors:
+ * Daris A Nevil <dnevil@snmc.com>
+ * Nicolas Pitre <nico@cam.org>
+ * Russell King <rmk@arm.linux.org.uk>
+ *
+ * History:
+ * 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet
+ * 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ"
+ * 03/16/01 Daris A Nevil modified smc9194.c for use with LAN91C111
+ * 08/22/01 Scott Anderson merge changes from smc9194 to smc91111
+ * 08/21/01 Pramod B Bhardwaj added support for RevB of LAN91C111
+ * 12/20/01 Jeff Sutherland initial port to Xscale PXA with DMA support
+ * 04/07/03 Nicolas Pitre unified SMC91x driver, killed irq races,
+ * more bus abstraction, big cleanup, etc.
+ * 29/09/03 Russell King - add driver model support
+ * - ethtool support
+ * - convert to use generic MII interface
+ * - add link up/down notification
+ * - don't try to handle full negotiation in
+ * smc_phy_configure
+ * - clean up (and fix stack overrun) in PHY
+ * MII read/write functions
+ */
+static const char version[] =
+ "smc91x.c: v1.0, mar 07 2003 by Nicolas Pitre <nico@cam.org>\n";
+
+/* Debugging level */
+#ifndef SMC_DEBUG
+#define SMC_DEBUG 0
+#endif
+
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "smc91x.h"
+
+#ifdef CONFIG_ISA
+/*
+ * the LAN91C111 can be at any of the following port addresses. To change,
+ * for a slightly different card, you can add it to the array. Keep in
+ * mind that the array must end in zero.
+ */
+static unsigned int smc_portlist[] __initdata = {
+ 0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
+ 0x300, 0x320, 0x340, 0x360, 0x380, 0x3A0, 0x3C0, 0x3E0, 0
+};
+
+#ifndef SMC_IOADDR
+# define SMC_IOADDR -1
+#endif
+static unsigned long io = SMC_IOADDR;
+module_param(io, ulong, 0400);
+MODULE_PARM_DESC(io, "I/O base address");
+
+#ifndef SMC_IRQ
+# define SMC_IRQ -1
+#endif
+static int irq = SMC_IRQ;
+module_param(irq, int, 0400);
+MODULE_PARM_DESC(irq, "IRQ number");
+
+#endif /* CONFIG_ISA */
+
+#ifndef SMC_NOWAIT
+# define SMC_NOWAIT 0
+#endif
+static int nowait = SMC_NOWAIT;
+module_param(nowait, int, 0400);
+MODULE_PARM_DESC(nowait, "set to 1 for no wait state");
+
+/*
+ * Transmit timeout, default 5 seconds.
+ */
+static int watchdog = 5000;
+module_param(watchdog, int, 0400);
+MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
+
+MODULE_LICENSE("GPL");
+
+/*
+ * The internal workings of the driver. If you are changing anything
+ * here with the SMC stuff, you should have the datasheet and know
+ * what you are doing.
+ */
+#define CARDNAME "smc91x"
+
+/*
+ * Use power-down feature of the chip
+ */
+#define POWER_DOWN 1
+
+/*
+ * Wait time for memory to be free. This probably shouldn't be
+ * tuned that much, as waiting for this means nothing else happens
+ * in the system
+ */
+#define MEMORY_WAIT_TIME 16
+
+/*
+ * This selects whether TX packets are sent one by one to the SMC91x internal
+ * memory and throttled until transmission completes. This may prevent
+ * RX overruns a litle by keeping much of the memory free for RX packets
+ * but to the expense of reduced TX throughput and increased IRQ overhead.
+ * Note this is not a cure for a too slow data bus or too high IRQ latency.
+ */
+#define THROTTLE_TX_PKTS 0
+
+/*
+ * The MII clock high/low times. 2x this number gives the MII clock period
+ * in microseconds. (was 50, but this gives 6.4ms for each MII transaction!)
+ */
+#define MII_DELAY 1
+
+/* store this information for the driver.. */
+struct smc_local {
+ /*
+ * If I have to wait until memory is available to send a
+ * packet, I will store the skbuff here, until I get the
+ * desired memory. Then, I'll send it out and free it.
+ */
+ struct sk_buff *saved_skb;
+
+ /*
+ * these are things that the kernel wants me to keep, so users
+ * can find out semi-useless statistics of how well the card is
+ * performing
+ */
+ struct net_device_stats stats;
+
+ /* version/revision of the SMC91x chip */
+ int version;
+
+ /* Contains the current active transmission mode */
+ int tcr_cur_mode;
+
+ /* Contains the current active receive mode */
+ int rcr_cur_mode;
+
+ /* Contains the current active receive/phy mode */
+ int rpc_cur_mode;
+ int ctl_rfduplx;
+ int ctl_rspeed;
+
+ u32 msg_enable;
+ u32 phy_type;
+ struct mii_if_info mii;
+ spinlock_t lock;
+
+#ifdef SMC_USE_PXA_DMA
+ /* DMA needs the physical address of the chip */
+ u_long physaddr;
+#endif
+};
+
+#if SMC_DEBUG > 0
+#define DBG(n, args...) \
+ do { \
+ if (SMC_DEBUG >= (n)) \
+ printk(KERN_DEBUG args); \
+ } while (0)
+
+#define PRINTK(args...) printk(args)
+#else
+#define DBG(n, args...) do { } while(0)
+#define PRINTK(args...) printk(KERN_DEBUG args)
+#endif
+
+#if SMC_DEBUG > 3
+static void PRINT_PKT(u_char *buf, int length)
+{
+ int i;
+ int remainder;
+ int lines;
+
+ lines = length / 16;
+ remainder = length % 16;
+
+ for (i = 0; i < lines ; i ++) {
+ int cur;
+ for (cur = 0; cur < 8; cur++) {
+ u_char a, b;
+ a = *buf++;
+ b = *buf++;
+ printk("%02x%02x ", a, b);
+ }
+ printk("\n");
+ }
+ for (i = 0; i < remainder/2 ; i++) {
+ u_char a, b;
+ a = *buf++;
+ b = *buf++;
+ printk("%02x%02x ", a, b);
+ }
+ printk("\n");
+}
+#else
+#define PRINT_PKT(x...) do { } while(0)
+#endif
+
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) do { \
+ unsigned long flags; \
+ unsigned char mask; \
+ spin_lock_irqsave(&lp->lock, flags); \
+ mask = SMC_GET_INT_MASK(); \
+ mask |= (x); \
+ SMC_SET_INT_MASK(mask); \
+ spin_unlock_irqrestore(&lp->lock, flags); \
+} while (0)
+
+/* this disables an interrupt from the interrupt mask register */
+#define SMC_DISABLE_INT(x) do { \
+ unsigned long flags; \
+ unsigned char mask; \
+ spin_lock_irqsave(&lp->lock, flags); \
+ mask = SMC_GET_INT_MASK(); \
+ mask &= ~(x); \
+ SMC_SET_INT_MASK(mask); \
+ spin_unlock_irqrestore(&lp->lock, flags); \
+} while (0)
+
+/*
+ * Wait while MMU is busy. This is usually in the order of a few nanosecs
+ * if at all, but let's avoid deadlocking the system if the hardware
+ * decides to go south.
+ */
+#define SMC_WAIT_MMU_BUSY() do { \
+ if (unlikely(SMC_GET_MMU_CMD() & MC_BUSY)) { \
+ unsigned long timeout = jiffies + 2; \
+ while (SMC_GET_MMU_CMD() & MC_BUSY) { \
+ if (time_after(jiffies, timeout)) { \
+ printk("%s: timeout %s line %d\n", \
+ dev->name, __FILE__, __LINE__); \
+ break; \
+ } \
+ cpu_relax(); \
+ } \
+ } \
+} while (0)
+
+
+/*
+ * this does a soft reset on the device
+ */
+static void smc_reset(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int ctl, cfg;
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ /*
+ * This resets the registers mostly to defaults, but doesn't
+ * affect EEPROM. That seems unnecessary
+ */
+ SMC_SELECT_BANK(0);
+ SMC_SET_RCR(RCR_SOFTRST);
+
+ /*
+ * Setup the Configuration Register
+ * This is necessary because the CONFIG_REG is not affected
+ * by a soft reset
+ */
+ SMC_SELECT_BANK(1);
+
+ cfg = CONFIG_DEFAULT;
+
+ /*
+ * Setup for fast accesses if requested. If the card/system
+ * can't handle it then there will be no recovery except for
+ * a hard reset or power cycle
+ */
+ if (nowait)
+ cfg |= CONFIG_NO_WAIT;
+
+ /*
+ * Release from possible power-down state
+ * Configuration register is not affected by Soft Reset
+ */
+ cfg |= CONFIG_EPH_POWER_EN;
+
+ SMC_SET_CONFIG(cfg);
+
+ /* this should pause enough for the chip to be happy */
+ /*
+ * elaborate? What does the chip _need_? --jgarzik
+ *
+ * This seems to be undocumented, but something the original
+ * driver(s) have always done. Suspect undocumented timing
+ * info/determined empirically. --rmk
+ */
+ udelay(1);
+
+ /* Disable transmit and receive functionality */
+ SMC_SELECT_BANK(0);
+ SMC_SET_RCR(RCR_CLEAR);
+ SMC_SET_TCR(TCR_CLEAR);
+
+ SMC_SELECT_BANK(1);
+ ctl = SMC_GET_CTL() | CTL_LE_ENABLE;
+
+ /*
+ * Set the control register to automatically release successfully
+ * transmitted packets, to make the best use out of our limited
+ * memory
+ */
+#if ! THROTTLE_TX_PKTS
+ ctl |= CTL_AUTO_RELEASE;
+#else
+ ctl &= ~CTL_AUTO_RELEASE;
+#endif
+ SMC_SET_CTL(ctl);
+
+ /* Disable all interrupts */
+ SMC_SELECT_BANK(2);
+ SMC_SET_INT_MASK(0);
+
+ /* Reset the MMU */
+ SMC_SET_MMU_CMD(MC_RESET);
+ SMC_WAIT_MMU_BUSY();
+}
+
+/*
+ * Enable Interrupts, Receive, and Transmit
+ */
+static void smc_enable(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc_local *lp = netdev_priv(dev);
+ int mask;
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ /* see the header file for options in TCR/RCR DEFAULT */
+ SMC_SELECT_BANK(0);
+ SMC_SET_TCR(lp->tcr_cur_mode);
+ SMC_SET_RCR(lp->rcr_cur_mode);
+
+ /* now, enable interrupts */
+ mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT;
+ if (lp->version >= (CHIP_91100 << 4))
+ mask |= IM_MDINT;
+ SMC_SELECT_BANK(2);
+ SMC_SET_INT_MASK(mask);
+}
+
+/*
+ * this puts the device in an inactive state
+ */
+static void smc_shutdown(unsigned long ioaddr)
+{
+ DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__);
+
+ /* no more interrupts for me */
+ SMC_SELECT_BANK(2);
+ SMC_SET_INT_MASK(0);
+
+ /* and tell the card to stay away from that nasty outside world */
+ SMC_SELECT_BANK(0);
+ SMC_SET_RCR(RCR_CLEAR);
+ SMC_SET_TCR(TCR_CLEAR);
+
+#ifdef POWER_DOWN
+ /* finally, shut the chip down */
+ SMC_SELECT_BANK(1);
+ SMC_SET_CONFIG(SMC_GET_CONFIG() & ~CONFIG_EPH_POWER_EN);
+#endif
+}
+
+/*
+ * This is the procedure to handle the receipt of a packet.
+ */
+static inline void smc_rcv(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int packet_number, status, packet_len;
+
+ DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
+
+ packet_number = SMC_GET_RXFIFO();
+ if (unlikely(packet_number & RXFIFO_REMPTY)) {
+ PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name);
+ return;
+ }
+
+ /* read from start of packet */
+ SMC_SET_PTR(PTR_READ | PTR_RCV | PTR_AUTOINC);
+
+ /* First two words are status and packet length */
+ SMC_GET_PKT_HDR(status, packet_len);
+ packet_len &= 0x07ff; /* mask off top bits */
+ DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
+ dev->name, packet_number, status,
+ packet_len, packet_len);
+
+ if (unlikely(status & RS_ERRORS)) {
+ lp->stats.rx_errors++;
+ if (status & RS_ALGNERR)
+ lp->stats.rx_frame_errors++;
+ if (status & (RS_TOOSHORT | RS_TOOLONG))
+ lp->stats.rx_length_errors++;
+ if (status & RS_BADCRC)
+ lp->stats.rx_crc_errors++;
+ } else {
+ struct sk_buff *skb;
+ unsigned char *data;
+ unsigned int data_len;
+
+ /* set multicast stats */
+ if (status & RS_MULTICAST)
+ lp->stats.multicast++;
+
+ /*
+ * Actual payload is packet_len - 4 (or 3 if odd byte).
+ * We want skb_reserve(2) and the final ctrl word
+ * (2 bytes, possibly containing the payload odd byte).
+ * Ence packet_len - 4 + 2 + 2.
+ */
+ skb = dev_alloc_skb(packet_len);
+ if (unlikely(skb == NULL)) {
+ printk(KERN_NOTICE "%s: Low memory, packet dropped.\n",
+ dev->name);
+ lp->stats.rx_dropped++;
+ goto done;
+ }
+
+ /* Align IP header to 32 bits */
+ skb_reserve(skb, 2);
+
+ /* BUG: the LAN91C111 rev A never sets this bit. Force it. */
+ if (lp->version == 0x90)
+ status |= RS_ODDFRAME;
+
+ /*
+ * If odd length: packet_len - 3,
+ * otherwise packet_len - 4.
+ */
+ data_len = packet_len - ((status & RS_ODDFRAME) ? 3 : 4);
+ data = skb_put(skb, data_len);
+ SMC_PULL_DATA(data, packet_len - 2);
+
+ PRINT_PKT(data, packet_len - 2);
+
+ dev->last_rx = jiffies;
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += data_len;
+ }
+
+done:
+ SMC_WAIT_MMU_BUSY();
+ SMC_SET_MMU_CMD(MC_RELEASE);
+}
+
+/*
+ * This is called to actually send a packet to the chip.
+ * Returns non-zero when successful.
+ */
+static void smc_hardware_send_packet(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ struct sk_buff *skb = lp->saved_skb;
+ unsigned int packet_no, len;
+ unsigned char *buf;
+
+ DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
+
+ packet_no = SMC_GET_AR();
+ if (unlikely(packet_no & AR_FAILED)) {
+ printk("%s: Memory allocation failed.\n", dev->name);
+ lp->saved_skb = NULL;
+ lp->stats.tx_errors++;
+ lp->stats.tx_fifo_errors++;
+ dev_kfree_skb_any(skb);
+ return;
+ }
+
+ /* point to the beginning of the packet */
+ SMC_SET_PN(packet_no);
+ SMC_SET_PTR(PTR_AUTOINC);
+
+ buf = skb->data;
+ len = skb->len;
+ DBG(2, "%s: TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
+ dev->name, packet_no, len, len, buf);
+ PRINT_PKT(buf, len);
+
+ /*
+ * Send the packet length (+6 for status words, length, and ctl.
+ * The card will pad to 64 bytes with zeroes if packet is too small.
+ */
+ SMC_PUT_PKT_HDR(0, len + 6);
+
+ /* send the actual data */
+ SMC_PUSH_DATA(buf, len & ~1);
+
+ /* Send final ctl word with the last byte if there is one */
+ SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG);
+
+ /* and let the chipset deal with it */
+ SMC_SET_MMU_CMD(MC_ENQUEUE);
+ SMC_ACK_INT(IM_TX_EMPTY_INT);
+
+ dev->trans_start = jiffies;
+ dev_kfree_skb_any(skb);
+ lp->saved_skb = NULL;
+ lp->stats.tx_packets++;
+ lp->stats.tx_bytes += len;
+}
+
+/*
+ * Since I am not sure if I will have enough room in the chip's ram
+ * to store the packet, I call this routine which either sends it
+ * now, or set the card to generates an interrupt when ready
+ * for the packet.
+ */
+static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int numPages, poll_count, status, saved_bank;
+
+ DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
+
+ BUG_ON(lp->saved_skb != NULL);
+ lp->saved_skb = skb;
+
+ /*
+ * The MMU wants the number of pages to be the number of 256 bytes
+ * 'pages', minus 1 (since a packet can't ever have 0 pages :))
+ *
+ * The 91C111 ignores the size bits, but earlier models don't.
+ *
+ * Pkt size for allocating is data length +6 (for additional status
+ * words, length and ctl)
+ *
+ * If odd size then last byte is included in ctl word.
+ */
+ numPages = ((skb->len & ~1) + (6 - 1)) >> 8;
+ if (unlikely(numPages > 7)) {
+ printk("%s: Far too big packet error.\n", dev->name);
+ lp->saved_skb = NULL;
+ lp->stats.tx_errors++;
+ lp->stats.tx_dropped++;
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ /* now, try to allocate the memory */
+ saved_bank = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(2);
+ SMC_SET_MMU_CMD(MC_ALLOC | numPages);
+
+ /*
+ * Poll the chip for a short amount of time in case the
+ * allocation succeeds quickly.
+ */
+ poll_count = MEMORY_WAIT_TIME;
+ do {
+ status = SMC_GET_INT();
+ if (status & IM_ALLOC_INT) {
+ SMC_ACK_INT(IM_ALLOC_INT);
+ break;
+ }
+ } while (--poll_count);
+
+ if (!poll_count) {
+ /* oh well, wait until the chip finds memory later */
+ netif_stop_queue(dev);
+ DBG(2, "%s: TX memory allocation deferred.\n", dev->name);
+ SMC_ENABLE_INT(IM_ALLOC_INT);
+ } else {
+ /*
+ * Allocation succeeded: push packet to the chip's own memory
+ * immediately.
+ *
+ * If THROTTLE_TX_PKTS is selected that means we don't want
+ * more than a single TX packet taking up space in the chip's
+ * internal memory at all time, in which case we stop the
+ * queue right here until we're notified of TX completion.
+ *
+ * Otherwise we're quite happy to feed more TX packets right
+ * away for better TX throughput, in which case the queue is
+ * left active.
+ */
+#if THROTTLE_TX_PKTS
+ netif_stop_queue(dev);
+#endif
+ smc_hardware_send_packet(dev);
+ SMC_ENABLE_INT(IM_TX_INT | IM_TX_EMPTY_INT);
+ }
+
+ SMC_SELECT_BANK(saved_bank);
+ return 0;
+}
+
+/*
+ * This handles a TX interrupt, which is only called when:
+ * - a TX error occurred, or
+ * - CTL_AUTO_RELEASE is not set and TX of a packet completed.
+ */
+static void smc_tx(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned int saved_packet, packet_no, tx_status, pkt_len;
+
+ DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
+
+ /* If the TX FIFO is empty then nothing to do */
+ packet_no = SMC_GET_TXFIFO();
+ if (unlikely(packet_no & TXFIFO_TEMPTY)) {
+ PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name);
+ return;
+ }
+
+ /* select packet to read from */
+ saved_packet = SMC_GET_PN();
+ SMC_SET_PN(packet_no);
+
+ /* read the first word (status word) from this packet */
+ SMC_SET_PTR(PTR_AUTOINC | PTR_READ);
+ SMC_GET_PKT_HDR(tx_status, pkt_len);
+ DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n",
+ dev->name, tx_status, packet_no);
+
+ if (!(tx_status & TS_SUCCESS))
+ lp->stats.tx_errors++;
+ if (tx_status & TS_LOSTCAR)
+ lp->stats.tx_carrier_errors++;
+
+ if (tx_status & TS_LATCOL) {
+ PRINTK("%s: late collision occurred on last xmit\n", dev->name);
+ lp->stats.tx_window_errors++;
+ if (!(lp->stats.tx_window_errors & 63) && net_ratelimit()) {
+ printk(KERN_INFO "%s: unexpectedly large numbers of "
+ "late collisions. Please check duplex "
+ "setting.\n", dev->name);
+ }
+ }
+
+ /* kill the packet */
+ SMC_WAIT_MMU_BUSY();
+ SMC_SET_MMU_CMD(MC_FREEPKT);
+
+ /* Don't restore Packet Number Reg until busy bit is cleared */
+ SMC_WAIT_MMU_BUSY();
+ SMC_SET_PN(saved_packet);
+
+ /* re-enable transmit */
+ SMC_SELECT_BANK(0);
+ SMC_SET_TCR(lp->tcr_cur_mode);
+ SMC_SELECT_BANK(2);
+}
+
+
+/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
+
+static void smc_mii_out(struct net_device *dev, unsigned int val, int bits)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int mii_reg, mask;
+
+ mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO);
+ mii_reg |= MII_MDOE;
+
+ for (mask = 1 << (bits - 1); mask; mask >>= 1) {
+ if (val & mask)
+ mii_reg |= MII_MDO;
+ else
+ mii_reg &= ~MII_MDO;
+
+ SMC_SET_MII(mii_reg);
+ udelay(MII_DELAY);
+ SMC_SET_MII(mii_reg | MII_MCLK);
+ udelay(MII_DELAY);
+ }
+}
+
+static unsigned int smc_mii_in(struct net_device *dev, int bits)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int mii_reg, mask, val;
+
+ mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO);
+ SMC_SET_MII(mii_reg);
+
+ for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) {
+ if (SMC_GET_MII() & MII_MDI)
+ val |= mask;
+
+ SMC_SET_MII(mii_reg);
+ udelay(MII_DELAY);
+ SMC_SET_MII(mii_reg | MII_MCLK);
+ udelay(MII_DELAY);
+ }
+
+ return val;
+}
+
+/*
+ * Reads a register from the MII Management serial interface
+ */
+static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int phydata, old_bank;
+
+ /* Save the current bank, and select bank 3 */
+ old_bank = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(3);
+
+ /* Idle - 32 ones */
+ smc_mii_out(dev, 0xffffffff, 32);
+
+ /* Start code (01) + read (10) + phyaddr + phyreg */
+ smc_mii_out(dev, 6 << 10 | phyaddr << 5 | phyreg, 14);
+
+ /* Turnaround (2bits) + phydata */
+ phydata = smc_mii_in(dev, 18);
+
+ /* Return to idle state */
+ SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO));
+
+ /* And select original bank */
+ SMC_SELECT_BANK(old_bank);
+
+ DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+ __FUNCTION__, phyaddr, phyreg, phydata);
+
+ return phydata;
+}
+
+/*
+ * Writes a register to the MII Management serial interface
+ */
+static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
+ int phydata)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int old_bank;
+
+ /* Save the current bank, and select bank 3 */
+ old_bank = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(3);
+
+ /* Idle - 32 ones */
+ smc_mii_out(dev, 0xffffffff, 32);
+
+ /* Start code (01) + write (01) + phyaddr + phyreg + turnaround + phydata */
+ smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32);
+
+ /* Return to idle state */
+ SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO));
+
+ /* And select original bank */
+ SMC_SELECT_BANK(old_bank);
+
+ DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
+ __FUNCTION__, phyaddr, phyreg, phydata);
+}
+
+/*
+ * Finds and reports the PHY address
+ */
+static void smc_detect_phy(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ int phyaddr;
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ lp->phy_type = 0;
+
+ /*
+ * Scan all 32 PHY addresses if necessary, starting at
+ * PHY#1 to PHY#31, and then PHY#0 last.
+ */
+ for (phyaddr = 1; phyaddr < 33; ++phyaddr) {
+ unsigned int id1, id2;
+
+ /* Read the PHY identifiers */
+ id1 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID1);
+ id2 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID2);
+
+ DBG(3, "%s: phy_id1=0x%x, phy_id2=0x%x\n",
+ dev->name, id1, id2);
+
+ /* Make sure it is a valid identifier */
+ if (id1 != 0x0000 && id1 != 0xffff && id1 != 0x8000 &&
+ id2 != 0x0000 && id2 != 0xffff && id2 != 0x8000) {
+ /* Save the PHY's address */
+ lp->mii.phy_id = phyaddr & 31;
+ lp->phy_type = id1 << 16 | id2;
+ break;
+ }
+ }
+}
+
+/*
+ * Sets the PHY to a configuration as determined by the user
+ */
+static int smc_phy_fixed(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int phyaddr = lp->mii.phy_id;
+ int bmcr, cfg1;
+
+ DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
+
+ /* Enter Link Disable state */
+ cfg1 = smc_phy_read(dev, phyaddr, PHY_CFG1_REG);
+ cfg1 |= PHY_CFG1_LNKDIS;
+ smc_phy_write(dev, phyaddr, PHY_CFG1_REG, cfg1);
+
+ /*
+ * Set our fixed capabilities
+ * Disable auto-negotiation
+ */
+ bmcr = 0;
+
+ if (lp->ctl_rfduplx)
+ bmcr |= BMCR_FULLDPLX;
+
+ if (lp->ctl_rspeed == 100)
+ bmcr |= BMCR_SPEED100;
+
+ /* Write our capabilities to the phy control register */
+ smc_phy_write(dev, phyaddr, MII_BMCR, bmcr);
+
+ /* Re-Configure the Receive/Phy Control register */
+ SMC_SET_RPC(lp->rpc_cur_mode);
+
+ return 1;
+}
+
+/*
+ * smc_phy_reset - reset the phy
+ * @dev: net device
+ * @phy: phy address
+ *
+ * Issue a software reset for the specified PHY and
+ * wait up to 100ms for the reset to complete. We should
+ * not access the PHY for 50ms after issuing the reset.
+ *
+ * The time to wait appears to be dependent on the PHY.
+ *
+ * Must be called with lp->lock locked.
+ */
+static int smc_phy_reset(struct net_device *dev, int phy)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned int bmcr;
+ int timeout;
+
+ smc_phy_write(dev, phy, MII_BMCR, BMCR_RESET);
+
+ for (timeout = 2; timeout; timeout--) {
+ spin_unlock_irq(&lp->lock);
+ msleep(50);
+ spin_lock_irq(&lp->lock);
+
+ bmcr = smc_phy_read(dev, phy, MII_BMCR);
+ if (!(bmcr & BMCR_RESET))
+ break;
+ }
+
+ return bmcr & BMCR_RESET;
+}
+
+/*
+ * smc_phy_powerdown - powerdown phy
+ * @dev: net device
+ * @phy: phy address
+ *
+ * Power down the specified PHY
+ */
+static void smc_phy_powerdown(struct net_device *dev, int phy)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned int bmcr;
+
+ spin_lock_irq(&lp->lock);
+ bmcr = smc_phy_read(dev, phy, MII_BMCR);
+ smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
+ spin_unlock_irq(&lp->lock);
+}
+
+/*
+ * smc_phy_check_media - check the media status and adjust TCR
+ * @dev: net device
+ * @init: set true for initialisation
+ *
+ * Select duplex mode depending on negotiation state. This
+ * also updates our carrier state.
+ */
+static void smc_phy_check_media(struct net_device *dev, int init)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
+ unsigned int old_bank;
+
+ /* duplex state has changed */
+ if (lp->mii.full_duplex) {
+ lp->tcr_cur_mode |= TCR_SWFDUP;
+ } else {
+ lp->tcr_cur_mode &= ~TCR_SWFDUP;
+ }
+
+ old_bank = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(0);
+ SMC_SET_TCR(lp->tcr_cur_mode);
+ SMC_SELECT_BANK(old_bank);
+ }
+}
+
+/*
+ * Configures the specified PHY through the MII management interface
+ * using Autonegotiation.
+ * Calls smc_phy_fixed() if the user has requested a certain config.
+ * If RPC ANEG bit is set, the media selection is dependent purely on
+ * the selection by the MII (either in the MII BMCR reg or the result
+ * of autonegotiation.) If the RPC ANEG bit is cleared, the selection
+ * is controlled by the RPC SPEED and RPC DPLX bits.
+ */
+static void smc_phy_configure(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int phyaddr = lp->mii.phy_id;
+ int my_phy_caps; /* My PHY capabilities */
+ int my_ad_caps; /* My Advertised capabilities */
+ int status;
+
+ DBG(3, "%s:smc_program_phy()\n", dev->name);
+
+ spin_lock_irq(&lp->lock);
+
+ /*
+ * We should not be called if phy_type is zero.
+ */
+ if (lp->phy_type == 0)
+ goto smc_phy_configure_exit;
+
+ if (smc_phy_reset(dev, phyaddr)) {
+ printk("%s: PHY reset timed out\n", dev->name);
+ goto smc_phy_configure_exit;
+ }
+
+ /*
+ * Enable PHY Interrupts (for register 18)
+ * Interrupts listed here are disabled
+ */
+ smc_phy_write(dev, phyaddr, PHY_MASK_REG,
+ PHY_INT_LOSSSYNC | PHY_INT_CWRD | PHY_INT_SSD |
+ PHY_INT_ESD | PHY_INT_RPOL | PHY_INT_JAB |
+ PHY_INT_SPDDET | PHY_INT_DPLXDET);
+
+ /* Configure the Receive/Phy Control register */
+ SMC_SELECT_BANK(0);
+ SMC_SET_RPC(lp->rpc_cur_mode);
+
+ /* If the user requested no auto neg, then go set his request */
+ if (lp->mii.force_media) {
+ smc_phy_fixed(dev);
+ goto smc_phy_configure_exit;
+ }
+
+ /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
+ my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR);
+
+ if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
+ printk(KERN_INFO "Auto negotiation NOT supported\n");
+ smc_phy_fixed(dev);
+ goto smc_phy_configure_exit;
+ }
+
+ my_ad_caps = ADVERTISE_CSMA; /* I am CSMA capable */
+
+ if (my_phy_caps & BMSR_100BASE4)
+ my_ad_caps |= ADVERTISE_100BASE4;
+ if (my_phy_caps & BMSR_100FULL)
+ my_ad_caps |= ADVERTISE_100FULL;
+ if (my_phy_caps & BMSR_100HALF)
+ my_ad_caps |= ADVERTISE_100HALF;
+ if (my_phy_caps & BMSR_10FULL)
+ my_ad_caps |= ADVERTISE_10FULL;
+ if (my_phy_caps & BMSR_10HALF)
+ my_ad_caps |= ADVERTISE_10HALF;
+
+ /* Disable capabilities not selected by our user */
+ if (lp->ctl_rspeed != 100)
+ my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
+
+ if (!lp->ctl_rfduplx)
+ my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
+
+ /* Update our Auto-Neg Advertisement Register */
+ smc_phy_write(dev, phyaddr, MII_ADVERTISE, my_ad_caps);
+ lp->mii.advertising = my_ad_caps;
+
+ /*
+ * Read the register back. Without this, it appears that when
+ * auto-negotiation is restarted, sometimes it isn't ready and
+ * the link does not come up.
+ */
+ status = smc_phy_read(dev, phyaddr, MII_ADVERTISE);
+
+ DBG(2, "%s: phy caps=%x\n", dev->name, my_phy_caps);
+ DBG(2, "%s: phy advertised caps=%x\n", dev->name, my_ad_caps);
+
+ /* Restart auto-negotiation process in order to advertise my caps */
+ smc_phy_write(dev, phyaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
+
+ smc_phy_check_media(dev, 1);
+
+smc_phy_configure_exit:
+ spin_unlock_irq(&lp->lock);
+}
+
+/*
+ * smc_phy_interrupt
+ *
+ * Purpose: Handle interrupts relating to PHY register 18. This is
+ * called from the "hard" interrupt handler under our private spinlock.
+ */
+static void smc_phy_interrupt(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ int phyaddr = lp->mii.phy_id;
+ int phy18;
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ if (lp->phy_type == 0)
+ return;
+
+ for(;;) {
+ smc_phy_check_media(dev, 0);
+
+ /* Read PHY Register 18, Status Output */
+ phy18 = smc_phy_read(dev, phyaddr, PHY_INT_REG);
+ if ((phy18 & PHY_INT_INT) == 0)
+ break;
+ }
+}
+
+/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
+
+static void smc_10bt_check_media(struct net_device *dev, int init)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int old_carrier, new_carrier, old_bank;
+
+ old_bank = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(0);
+ old_carrier = netif_carrier_ok(dev) ? 1 : 0;
+ new_carrier = SMC_inw(ioaddr, EPH_STATUS_REG) & ES_LINK_OK ? 1 : 0;
+
+ if (init || (old_carrier != new_carrier)) {
+ if (!new_carrier) {
+ netif_carrier_off(dev);
+ } else {
+ netif_carrier_on(dev);
+ }
+ if (netif_msg_link(lp))
+ printk(KERN_INFO "%s: link %s\n", dev->name,
+ new_carrier ? "up" : "down");
+ }
+ SMC_SELECT_BANK(old_bank);
+}
+
+static void smc_eph_interrupt(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int old_bank, ctl;
+
+ smc_10bt_check_media(dev, 0);
+
+ old_bank = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(1);
+
+ ctl = SMC_GET_CTL();
+ SMC_SET_CTL(ctl & ~CTL_LE_ENABLE);
+ SMC_SET_CTL(ctl);
+
+ SMC_SELECT_BANK(old_bank);
+}
+
+/*
+ * This is the main routine of the driver, to handle the device when
+ * it needs some attention.
+ */
+static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ unsigned long ioaddr = dev->base_addr;
+ struct smc_local *lp = netdev_priv(dev);
+ int status, mask, timeout, card_stats;
+ int saved_bank, saved_pointer;
+
+ DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
+
+ saved_bank = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(2);
+ saved_pointer = SMC_GET_PTR();
+ mask = SMC_GET_INT_MASK();
+ SMC_SET_INT_MASK(0);
+
+ /* set a timeout value, so I don't stay here forever */
+ timeout = 8;
+
+ do {
+ status = SMC_GET_INT();
+
+ DBG(2, "%s: IRQ 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
+ dev->name, status, mask,
+ ({ int meminfo; SMC_SELECT_BANK(0);
+ meminfo = SMC_GET_MIR();
+ SMC_SELECT_BANK(2); meminfo; }),
+ SMC_GET_FIFO());
+
+ status &= mask;
+ if (!status)
+ break;
+
+ spin_lock(&lp->lock);
+
+ if (status & IM_RCV_INT) {
+ DBG(3, "%s: RX irq\n", dev->name);
+ smc_rcv(dev);
+ } else if (status & IM_TX_INT) {
+ DBG(3, "%s: TX int\n", dev->name);
+ smc_tx(dev);
+ SMC_ACK_INT(IM_TX_INT);
+#if THROTTLE_TX_PKTS
+ netif_wake_queue(dev);
+#endif
+ } else if (status & IM_ALLOC_INT) {
+ DBG(3, "%s: Allocation irq\n", dev->name);
+ smc_hardware_send_packet(dev);
+ mask |= (IM_TX_INT | IM_TX_EMPTY_INT);
+ mask &= ~IM_ALLOC_INT;
+#if ! THROTTLE_TX_PKTS
+ netif_wake_queue(dev);
+#endif
+ } else if (status & IM_TX_EMPTY_INT) {
+ DBG(3, "%s: TX empty\n", dev->name);
+ mask &= ~IM_TX_EMPTY_INT;
+
+ /* update stats */
+ SMC_SELECT_BANK(0);
+ card_stats = SMC_GET_COUNTER();
+ SMC_SELECT_BANK(2);
+
+ /* single collisions */
+ lp->stats.collisions += card_stats & 0xF;
+ card_stats >>= 4;
+
+ /* multiple collisions */
+ lp->stats.collisions += card_stats & 0xF;
+ } else if (status & IM_RX_OVRN_INT) {
+ DBG(1, "%s: RX overrun\n", dev->name);
+ SMC_ACK_INT(IM_RX_OVRN_INT);
+ lp->stats.rx_errors++;
+ lp->stats.rx_fifo_errors++;
+ } else if (status & IM_EPH_INT) {
+ smc_eph_interrupt(dev);
+ } else if (status & IM_MDINT) {
+ SMC_ACK_INT(IM_MDINT);
+ smc_phy_interrupt(dev);
+ } else if (status & IM_ERCV_INT) {
+ SMC_ACK_INT(IM_ERCV_INT);
+ PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT \n", dev->name);
+ }
+
+ spin_unlock(&lp->lock);
+ } while (--timeout);
+
+ /* restore register states */
+ SMC_SET_INT_MASK(mask);
+ SMC_SET_PTR(saved_pointer);
+ SMC_SELECT_BANK(saved_bank);
+
+ DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout);
+
+ /*
+ * We return IRQ_HANDLED unconditionally here even if there was
+ * nothing to do. There is a possibility that a packet might
+ * get enqueued into the chip right after TX_EMPTY_INT is raised
+ * but just before the CPU acknowledges the IRQ.
+ * Better take an unneeded IRQ in some occasions than complexifying
+ * the code for all cases.
+ */
+ return IRQ_HANDLED;
+}
+
+/* Our watchdog timed out. Called by the networking layer */
+static void smc_timeout(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ smc_reset(dev);
+ smc_enable(dev);
+
+#if 0
+ /*
+ * Reconfiguring the PHY doesn't seem like a bad idea here, but
+ * it introduced a problem. Now that this is a timeout routine,
+ * we are getting called from within an interrupt context.
+ * smc_phy_configure() calls msleep() which calls
+ * schedule_timeout() which calls schedule(). When schedule()
+ * is called from an interrupt context, it prints out
+ * "Scheduling in interrupt" and then calls BUG(). This is
+ * obviously not desirable. This was worked around by removing
+ * the call to smc_phy_configure() here because it didn't seem
+ * absolutely necessary. Ultimately, if msleep() is
+ * supposed to be usable from an interrupt context (which it
+ * looks like it thinks it should handle), it should be fixed.
+ */
+ if (lp->phy_type != 0)
+ smc_phy_configure(dev);
+#endif
+
+ /* clear anything saved */
+ if (lp->saved_skb != NULL) {
+ dev_kfree_skb (lp->saved_skb);
+ lp->saved_skb = NULL;
+ lp->stats.tx_errors++;
+ lp->stats.tx_aborted_errors++;
+ }
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+}
+
+/*
+ * This sets the internal hardware table to filter out unwanted multicast
+ * packets before they take up memory.
+ *
+ * The SMC chip uses a hash table where the high 6 bits of the CRC of
+ * address are the offset into the table. If that bit is 1, then the
+ * multicast packet is accepted. Otherwise, it's dropped silently.
+ *
+ * To use the 6 bits as an offset into the table, the high 3 bits are the
+ * number of the 8 bit register, while the low 3 bits are the bit within
+ * that register.
+ *
+ * This routine is based very heavily on the one provided by Peter Cammaert.
+ */
+static void
+smc_setmulticast(unsigned long ioaddr, int count, struct dev_mc_list *addrs)
+{
+ int i;
+ unsigned char multicast_table[8];
+ struct dev_mc_list *cur_addr;
+
+ /* table for flipping the order of 3 bits */
+ static unsigned char invert3[] = { 0, 4, 2, 6, 1, 5, 3, 7 };
+
+ /* start with a table of all zeros: reject all */
+ memset(multicast_table, 0, sizeof(multicast_table));
+
+ cur_addr = addrs;
+ for (i = 0; i < count; i++, cur_addr = cur_addr->next) {
+ int position;
+
+ /* do we have a pointer here? */
+ if (!cur_addr)
+ break;
+ /* make sure this is a multicast address - shouldn't this
+ be a given if we have it here ? */
+ if (!(*cur_addr->dmi_addr & 1))
+ continue;
+
+ /* only use the low order bits */
+ position = crc32_le(~0, cur_addr->dmi_addr, 6) & 0x3f;
+
+ /* do some messy swapping to put the bit in the right spot */
+ multicast_table[invert3[position&7]] |=
+ (1<<invert3[(position>>3)&7]);
+
+ }
+ /* now, the table can be loaded into the chipset */
+ SMC_SELECT_BANK(3);
+ SMC_SET_MCAST(multicast_table);
+}
+
+/*
+ * This routine will, depending on the values passed to it,
+ * either make it accept multicast packets, go into
+ * promiscuous mode (for TCPDUMP and cousins) or accept
+ * a select set of multicast packets
+ */
+static void smc_set_multicast_list(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ SMC_SELECT_BANK(0);
+ if (dev->flags & IFF_PROMISC) {
+ DBG(2, "%s: RCR_PRMS\n", dev->name);
+ lp->rcr_cur_mode |= RCR_PRMS;
+ SMC_SET_RCR(lp->rcr_cur_mode);
+ }
+
+/* BUG? I never disable promiscuous mode if multicasting was turned on.
+ Now, I turn off promiscuous mode, but I don't do anything to multicasting
+ when promiscuous mode is turned on.
+*/
+
+ /*
+ * Here, I am setting this to accept all multicast packets.
+ * I don't need to zero the multicast table, because the flag is
+ * checked before the table is
+ */
+ else if (dev->flags & IFF_ALLMULTI || dev->mc_count > 16) {
+ lp->rcr_cur_mode |= RCR_ALMUL;
+ SMC_SET_RCR(lp->rcr_cur_mode);
+ DBG(2, "%s: RCR_ALMUL\n", dev->name);
+ }
+
+ /*
+ * We just get all multicast packets even if we only want them
+ * from one source. This will be changed at some future point.
+ */
+ else if (dev->mc_count) {
+ /* support hardware multicasting */
+
+ /* be sure I get rid of flags I might have set */
+ lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
+ SMC_SET_RCR(lp->rcr_cur_mode);
+ /*
+ * NOTE: this has to set the bank, so make sure it is the
+ * last thing called. The bank is set to zero at the top
+ */
+ smc_setmulticast(ioaddr, dev->mc_count, dev->mc_list);
+ } else {
+ DBG(2, "%s: ~(RCR_PRMS|RCR_ALMUL)\n", dev->name);
+ lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
+ SMC_SET_RCR(lp->rcr_cur_mode);
+
+ /*
+ * since I'm disabling all multicast entirely, I need to
+ * clear the multicast list
+ */
+ SMC_SELECT_BANK(3);
+ SMC_CLEAR_MCAST();
+ }
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc..
+ */
+static int
+smc_open(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ /*
+ * Check that the address is valid. If its not, refuse
+ * to bring the device up. The user must specify an
+ * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
+ */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ DBG(2, (KERN_DEBUG "smc_open: no valid ethernet hw addr\n"));
+ return -EINVAL;
+ }
+
+ /* clear out all the junk that was put here before... */
+ lp->saved_skb = NULL;
+
+ /* Setup the default Register Modes */
+ lp->tcr_cur_mode = TCR_DEFAULT;
+ lp->rcr_cur_mode = RCR_DEFAULT;
+ lp->rpc_cur_mode = RPC_DEFAULT;
+
+ /*
+ * If we are not using a MII interface, we need to
+ * monitor our own carrier signal to detect faults.
+ */
+ if (lp->phy_type == 0)
+ lp->tcr_cur_mode |= TCR_MON_CSN;
+
+ /* reset the hardware */
+ smc_reset(dev);
+ smc_enable(dev);
+
+ SMC_SELECT_BANK(1);
+ SMC_SET_MAC_ADDR(dev->dev_addr);
+
+ /* Configure the PHY */
+ if (lp->phy_type != 0)
+ smc_phy_configure(dev);
+ else {
+ spin_lock_irq(&lp->lock);
+ smc_10bt_check_media(dev, 1);
+ spin_unlock_irq(&lp->lock);
+ }
+
+ /*
+ * make sure to initialize the link state with netif_carrier_off()
+ * somewhere, too --jgarzik
+ *
+ * smc_phy_configure() and smc_10bt_check_media() does that. --rmk
+ */
+ netif_start_queue(dev);
+ return 0;
+}
+
+/*
+ * smc_close
+ *
+ * this makes the board clean up everything that it can
+ * and not talk to the outside world. Caused by
+ * an 'ifconfig ethX down'
+ */
+static int smc_close(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+
+ /* clear everything */
+ smc_shutdown(dev->base_addr);
+
+ if (lp->phy_type != 0)
+ smc_phy_powerdown(dev, lp->mii.phy_id);
+
+ return 0;
+}
+
+/*
+ * Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+static struct net_device_stats *smc_query_statistics(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+
+ DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
+
+ return &lp->stats;
+}
+
+/*
+ * Ethtool support
+ */
+static int
+smc_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ int ret;
+
+ cmd->maxtxpkt = 1;
+ cmd->maxrxpkt = 1;
+
+ if (lp->phy_type != 0) {
+ spin_lock_irq(&lp->lock);
+ ret = mii_ethtool_gset(&lp->mii, cmd);
+ spin_unlock_irq(&lp->lock);
+ } else {
+ cmd->supported = SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_TP | SUPPORTED_AUI;
+
+ if (lp->ctl_rspeed == 10)
+ cmd->speed = SPEED_10;
+ else if (lp->ctl_rspeed == 100)
+ cmd->speed = SPEED_100;
+
+ cmd->autoneg = AUTONEG_DISABLE;
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->port = 0;
+ cmd->duplex = lp->tcr_cur_mode & TCR_SWFDUP ? DUPLEX_FULL : DUPLEX_HALF;
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int
+smc_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ int ret;
+
+ if (lp->phy_type != 0) {
+ spin_lock_irq(&lp->lock);
+ ret = mii_ethtool_sset(&lp->mii, cmd);
+ spin_unlock_irq(&lp->lock);
+ } else {
+ if (cmd->autoneg != AUTONEG_DISABLE ||
+ cmd->speed != SPEED_10 ||
+ (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
+ (cmd->port != PORT_TP && cmd->port != PORT_AUI))
+ return -EINVAL;
+
+// lp->port = cmd->port;
+ lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
+
+// if (netif_running(dev))
+// smc_set_port(dev);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static void
+smc_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strncpy(info->driver, CARDNAME, sizeof(info->driver));
+ strncpy(info->version, version, sizeof(info->version));
+ strncpy(info->bus_info, dev->class_dev.dev->bus_id, sizeof(info->bus_info));
+}
+
+static int smc_ethtool_nwayreset(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ int ret = -EINVAL;
+
+ if (lp->phy_type != 0) {
+ spin_lock_irq(&lp->lock);
+ ret = mii_nway_restart(&lp->mii);
+ spin_unlock_irq(&lp->lock);
+ }
+
+ return ret;
+}
+
+static u32 smc_ethtool_getmsglevel(struct net_device *dev)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ return lp->msg_enable;
+}
+
+static void smc_ethtool_setmsglevel(struct net_device *dev, u32 level)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ lp->msg_enable = level;
+}
+
+static struct ethtool_ops smc_ethtool_ops = {
+ .get_settings = smc_ethtool_getsettings,
+ .set_settings = smc_ethtool_setsettings,
+ .get_drvinfo = smc_ethtool_getdrvinfo,
+
+ .get_msglevel = smc_ethtool_getmsglevel,
+ .set_msglevel = smc_ethtool_setmsglevel,
+ .nway_reset = smc_ethtool_nwayreset,
+ .get_link = ethtool_op_get_link,
+// .get_eeprom = smc_ethtool_geteeprom,
+// .set_eeprom = smc_ethtool_seteeprom,
+};
+
+/*
+ * smc_findirq
+ *
+ * This routine has a simple purpose -- make the SMC chip generate an
+ * interrupt, so an auto-detect routine can detect it, and find the IRQ,
+ */
+/*
+ * does this still work?
+ *
+ * I just deleted auto_irq.c, since it was never built...
+ * --jgarzik
+ */
+static int __init smc_findirq(unsigned long ioaddr)
+{
+ int timeout = 20;
+ unsigned long cookie;
+
+ DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__);
+
+ cookie = probe_irq_on();
+
+ /*
+ * What I try to do here is trigger an ALLOC_INT. This is done
+ * by allocating a small chunk of memory, which will give an interrupt
+ * when done.
+ */
+ /* enable ALLOCation interrupts ONLY */
+ SMC_SELECT_BANK(2);
+ SMC_SET_INT_MASK(IM_ALLOC_INT);
+
+ /*
+ * Allocate 512 bytes of memory. Note that the chip was just
+ * reset so all the memory is available
+ */
+ SMC_SET_MMU_CMD(MC_ALLOC | 1);
+
+ /*
+ * Wait until positive that the interrupt has been generated
+ */
+ do {
+ int int_status;
+ udelay(10);
+ int_status = SMC_GET_INT();
+ if (int_status & IM_ALLOC_INT)
+ break; /* got the interrupt */
+ } while (--timeout);
+
+ /*
+ * there is really nothing that I can do here if timeout fails,
+ * as autoirq_report will return a 0 anyway, which is what I
+ * want in this case. Plus, the clean up is needed in both
+ * cases.
+ */
+
+ /* and disable all interrupts again */
+ SMC_SET_INT_MASK(0);
+
+ /* and return what I found */
+ return probe_irq_off(cookie);
+}
+
+/*
+ * Function: smc_probe(unsigned long ioaddr)
+ *
+ * Purpose:
+ * Tests to see if a given ioaddr points to an SMC91x chip.
+ * Returns a 0 on success
+ *
+ * Algorithm:
+ * (1) see if the high byte of BANK_SELECT is 0x33
+ * (2) compare the ioaddr with the base register's address
+ * (3) see if I recognize the chip ID in the appropriate register
+ *
+ * Here I do typical initialization tasks.
+ *
+ * o Initialize the structure if needed
+ * o print out my vanity message if not done so already
+ * o print out what type of hardware is detected
+ * o print out the ethernet address
+ * o find the IRQ
+ * o set up my private data
+ * o configure the dev structure with my subroutines
+ * o actually GRAB the irq.
+ * o GRAB the region
+ */
+static int __init smc_probe(struct net_device *dev, unsigned long ioaddr)
+{
+ struct smc_local *lp = netdev_priv(dev);
+ static int version_printed = 0;
+ int i, retval;
+ unsigned int val, revision_register;
+ const char *version_string;
+
+ DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__);
+
+ /* First, see if the high byte is 0x33 */
+ val = SMC_CURRENT_BANK();
+ DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val);
+ if ((val & 0xFF00) != 0x3300) {
+ if ((val & 0xFF) == 0x33) {
+ printk(KERN_WARNING
+ "%s: Detected possible byte-swapped interface"
+ " at IOADDR 0x%lx\n", CARDNAME, ioaddr);
+ }
+ retval = -ENODEV;
+ goto err_out;
+ }
+
+ /*
+ * The above MIGHT indicate a device, but I need to write to
+ * further test this.
+ */
+ SMC_SELECT_BANK(0);
+ val = SMC_CURRENT_BANK();
+ if ((val & 0xFF00) != 0x3300) {
+ retval = -ENODEV;
+ goto err_out;
+ }
+
+ /*
+ * well, we've already written once, so hopefully another
+ * time won't hurt. This time, I need to switch the bank
+ * register to bank 1, so I can access the base address
+ * register
+ */
+ SMC_SELECT_BANK(1);
+ val = SMC_GET_BASE();
+ val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
+ if ((ioaddr & ((PAGE_SIZE-1)<<SMC_IO_SHIFT)) != val) {
+ printk("%s: IOADDR %lx doesn't match configuration (%x).\n",
+ CARDNAME, ioaddr, val);
+ }
+
+ /*
+ * check if the revision register is something that I
+ * recognize. These might need to be added to later,
+ * as future revisions could be added.
+ */
+ SMC_SELECT_BANK(3);
+ revision_register = SMC_GET_REV();
+ DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
+ version_string = chip_ids[ (revision_register >> 4) & 0xF];
+ if (!version_string || (revision_register & 0xff00) != 0x3300) {
+ /* I don't recognize this chip, so... */
+ printk("%s: IO 0x%lx: Unrecognized revision register 0x%04x"
+ ", Contact author.\n", CARDNAME,
+ ioaddr, revision_register);
+
+ retval = -ENODEV;
+ goto err_out;
+ }
+
+ /* At this point I'll assume that the chip is an SMC91x. */
+ if (version_printed++ == 0)
+ printk("%s", version);
+
+ /* fill in some of the fields */
+ dev->base_addr = ioaddr;
+ lp->version = revision_register & 0xff;
+
+ /* Get the MAC address */
+ SMC_SELECT_BANK(1);
+ SMC_GET_MAC_ADDR(dev->dev_addr);
+
+ /* now, reset the chip, and put it into a known state */
+ smc_reset(dev);
+
+ /*
+ * If dev->irq is 0, then the device has to be banged on to see
+ * what the IRQ is.
+ *
+ * This banging doesn't always detect the IRQ, for unknown reasons.
+ * a workaround is to reset the chip and try again.
+ *
+ * Interestingly, the DOS packet driver *SETS* the IRQ on the card to
+ * be what is requested on the command line. I don't do that, mostly
+ * because the card that I have uses a non-standard method of accessing
+ * the IRQs, and because this _should_ work in most configurations.
+ *
+ * Specifying an IRQ is done with the assumption that the user knows
+ * what (s)he is doing. No checking is done!!!!
+ */
+ if (dev->irq < 1) {
+ int trials;
+
+ trials = 3;
+ while (trials--) {
+ dev->irq = smc_findirq(ioaddr);
+ if (dev->irq)
+ break;
+ /* kick the card and try again */
+ smc_reset(dev);
+ }
+ }
+ if (dev->irq == 0) {
+ printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
+ dev->name);
+ retval = -ENODEV;
+ goto err_out;
+ }
+ dev->irq = irq_canonicalize(dev->irq);
+
+ /* Fill in the fields of the device structure with ethernet values. */
+ ether_setup(dev);
+
+ dev->open = smc_open;
+ dev->stop = smc_close;
+ dev->hard_start_xmit = smc_hard_start_xmit;
+ dev->tx_timeout = smc_timeout;
+ dev->watchdog_timeo = msecs_to_jiffies(watchdog);
+ dev->get_stats = smc_query_statistics;
+ dev->set_multicast_list = smc_set_multicast_list;
+ dev->ethtool_ops = &smc_ethtool_ops;
+
+ spin_lock_init(&lp->lock);
+ lp->mii.phy_id_mask = 0x1f;
+ lp->mii.reg_num_mask = 0x1f;
+ lp->mii.force_media = 0;
+ lp->mii.full_duplex = 0;
+ lp->mii.dev = dev;
+ lp->mii.mdio_read = smc_phy_read;
+ lp->mii.mdio_write = smc_phy_write;
+
+ /*
+ * Locate the phy, if any.
+ */
+ if (lp->version >= (CHIP_91100 << 4))
+ smc_detect_phy(dev);
+
+ /* Set default parameters */
+ lp->msg_enable = NETIF_MSG_LINK;
+ lp->ctl_rfduplx = 0;
+ lp->ctl_rspeed = 10;
+
+ if (lp->version >= (CHIP_91100 << 4)) {
+ lp->ctl_rfduplx = 1;
+ lp->ctl_rspeed = 100;
+ }
+
+ /* Grab the IRQ */
+ retval = request_irq(dev->irq, &smc_interrupt, 0, dev->name, dev);
+ if (retval)
+ goto err_out;
+
+ set_irq_type(dev->irq, IRQT_RISING);
+#ifdef SMC_USE_PXA_DMA
+ {
+ int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
+ smc_pxa_dma_irq, NULL);
+ if (dma >= 0)
+ dev->dma = dma;
+ }
+#endif
+
+ retval = register_netdev(dev);
+ if (retval == 0) {
+ /* now, print out the card info, in a short format.. */
+ printk("%s: %s (rev %d) at %#lx IRQ %d",
+ dev->name, version_string, revision_register & 0x0f,
+ dev->base_addr, dev->irq);
+
+ if (dev->dma != (unsigned char)-1)
+ printk(" DMA %d", dev->dma);
+
+ printk("%s%s\n", nowait ? " [nowait]" : "",
+ THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ printk("%s: Invalid ethernet MAC address. Please "
+ "set using ifconfig\n", dev->name);
+ } else {
+ /* Print the Ethernet address */
+ printk("%s: Ethernet addr: ", dev->name);
+ for (i = 0; i < 5; i++)
+ printk("%2.2x:", dev->dev_addr[i]);
+ printk("%2.2x\n", dev->dev_addr[5]);
+ }
+
+ if (lp->phy_type == 0) {
+ PRINTK("%s: No PHY found\n", dev->name);
+ } else if ((lp->phy_type & 0xfffffff0) == 0x0016f840) {
+ PRINTK("%s: PHY LAN83C183 (LAN91C111 Internal)\n", dev->name);
+ } else if ((lp->phy_type & 0xfffffff0) == 0x02821c50) {
+ PRINTK("%s: PHY LAN83C180\n", dev->name);
+ }
+ }
+
+err_out:
+#ifdef SMC_USE_PXA_DMA
+ if (retval && dev->dma != (unsigned char)-1)
+ pxa_free_dma(dev->dma);
+#endif
+ return retval;
+}
+
+static int smc_enable_device(unsigned long attrib_phys)
+{
+ unsigned long flags;
+ unsigned char ecor, ecsr;
+ void *addr;
+
+ /*
+ * Map the attribute space. This is overkill, but clean.
+ */
+ addr = ioremap(attrib_phys, ATTRIB_SIZE);
+ if (!addr)
+ return -ENOMEM;
+
+ /*
+ * Reset the device. We must disable IRQs around this
+ * since a reset causes the IRQ line become active.
+ */
+ local_irq_save(flags);
+ ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
+ writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
+ readb(addr + (ECOR << SMC_IO_SHIFT));
+
+ /*
+ * Wait 100us for the chip to reset.
+ */
+ udelay(100);
+
+ /*
+ * The device will ignore all writes to the enable bit while
+ * reset is asserted, even if the reset bit is cleared in the
+ * same write. Must clear reset first, then enable the device.
+ */
+ writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
+ writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
+
+ /*
+ * Set the appropriate byte/word mode.
+ */
+ ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
+#ifndef SMC_CAN_USE_16BIT
+ ecsr |= ECSR_IOIS8;
+#endif
+ writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
+ local_irq_restore(flags);
+
+ iounmap(addr);
+
+ /*
+ * Wait for the chip to wake up. We could poll the control
+ * register in the main register space, but that isn't mapped
+ * yet. We know this is going to take 750us.
+ */
+ msleep(1);
+
+ return 0;
+}
+
+/*
+ * smc_init(void)
+ * Input parameters:
+ * dev->base_addr == 0, try to find all possible locations
+ * dev->base_addr > 0x1ff, this is the address to check
+ * dev->base_addr == <anything else>, return failure code
+ *
+ * Output:
+ * 0 --> there is a device
+ * anything else, error
+ */
+static int smc_drv_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev;
+ struct resource *res, *ext = NULL;
+ unsigned int *addr;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /*
+ * Request the regions.
+ */
+ if (!request_mem_region(res->start, SMC_IO_EXTENT, "smc91x")) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ndev = alloc_etherdev(sizeof(struct smc_local));
+ if (!ndev) {
+ printk("%s: could not allocate device.\n", CARDNAME);
+ ret = -ENOMEM;
+ goto release_1;
+ }
+ SET_MODULE_OWNER(ndev);
+ SET_NETDEV_DEV(ndev, dev);
+
+ ndev->dma = (unsigned char)-1;
+ ndev->irq = platform_get_irq(pdev, 0);
+
+ ext = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (ext) {
+ if (!request_mem_region(ext->start, ATTRIB_SIZE, ndev->name)) {
+ ret = -EBUSY;
+ goto release_1;
+ }
+
+#if defined(CONFIG_SA1100_ASSABET)
+ NCR_0 |= NCR_ENET_OSC_EN;
+#endif
+
+ ret = smc_enable_device(ext->start);
+ if (ret)
+ goto release_both;
+ }
+
+ addr = ioremap(res->start, SMC_IO_EXTENT);
+ if (!addr) {
+ ret = -ENOMEM;
+ goto release_both;
+ }
+
+ dev_set_drvdata(dev, ndev);
+ ret = smc_probe(ndev, (unsigned long)addr);
+ if (ret != 0) {
+ dev_set_drvdata(dev, NULL);
+ iounmap(addr);
+ release_both:
+ if (ext)
+ release_mem_region(ext->start, ATTRIB_SIZE);
+ free_netdev(ndev);
+ release_1:
+ release_mem_region(res->start, SMC_IO_EXTENT);
+ out:
+ printk("%s: not found (%d).\n", CARDNAME, ret);
+ }
+#ifdef SMC_USE_PXA_DMA
+ else {
+ struct smc_local *lp = netdev_priv(ndev);
+ lp->physaddr = res->start;
+ }
+#endif
+
+ return ret;
+}
+
+static int smc_drv_remove(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct resource *res;
+
+ dev_set_drvdata(dev, NULL);
+
+ unregister_netdev(ndev);
+
+ free_irq(ndev->irq, ndev);
+
+#ifdef SMC_USE_PXA_DMA
+ if (ndev->dma != (unsigned char)-1)
+ pxa_free_dma(ndev->dma);
+#endif
+ iounmap((void *)ndev->base_addr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res)
+ release_mem_region(res->start, ATTRIB_SIZE);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, SMC_IO_EXTENT);
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+static int smc_drv_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (ndev && level == SUSPEND_DISABLE) {
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ smc_shutdown(ndev->base_addr);
+ }
+ }
+ return 0;
+}
+
+static int smc_drv_resume(struct device *dev, u32 level)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (ndev && level == RESUME_ENABLE) {
+ struct smc_local *lp = netdev_priv(ndev);
+ unsigned long ioaddr = ndev->base_addr;
+
+ if (pdev->num_resources == 3)
+ smc_enable_device(pdev->resource[2].start);
+ if (netif_running(ndev)) {
+ smc_reset(ndev);
+ smc_enable(ndev);
+ SMC_SELECT_BANK(1);
+ SMC_SET_MAC_ADDR(ndev->dev_addr);
+ if (lp->phy_type != 0)
+ smc_phy_configure(ndev);
+ netif_device_attach(ndev);
+ }
+ }
+ return 0;
+}
+
+static struct device_driver smc_driver = {
+ .name = CARDNAME,
+ .bus = &platform_bus_type,
+ .probe = smc_drv_probe,
+ .remove = smc_drv_remove,
+ .suspend = smc_drv_suspend,
+ .resume = smc_drv_resume,
+};
+
+static int __init smc_init(void)
+{
+#ifdef MODULE
+ if (io == -1)
+ printk(KERN_WARNING
+ "%s: You shouldn't use auto-probing with insmod!\n",
+ CARDNAME);
+#endif
+
+ return driver_register(&smc_driver);
+}
+
+static void __exit smc_cleanup(void)
+{
+ driver_unregister(&smc_driver);
+}
+
+module_init(smc_init);
+module_exit(smc_cleanup);
git://git.onelab.eu / linux-2.6.git / blobdiff