#define RX_COPY_THRESHOLD 256
+#define TG3_RX_INTERNAL_RING_SZ_5906 32
+
#define RX_STD_MAX_SIZE 1536
#define RX_STD_MAX_SIZE_5705 512
#define RX_JUMBO_MAX_SIZE 0xdeadbeef /* XXX */
#define CHIPREV_ID_5752_A0_HW 0x5000
#define CHIPREV_ID_5752_A0 0x6000
#define CHIPREV_ID_5752_A1 0x6001
+#define CHIPREV_ID_5906_A1 0xc001
#define GET_ASIC_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 12)
#define ASIC_REV_5700 0x07
#define ASIC_REV_5701 0x00
#define ASIC_REV_5714 0x09
#define ASIC_REV_5755 0x0a
#define ASIC_REV_5787 0x0b
+#define ASIC_REV_5906 0x0c
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
#define SNDDATAI_SCTRL_FORCE_ZERO 0x00000010
#define SNDDATAI_STATSENAB 0x00000c0c
#define SNDDATAI_STATSINCMASK 0x00000c10
-/* 0xc14 --> 0xc80 unused */
+#define ISO_PKT_TX 0x00000c20
+/* 0xc24 --> 0xc80 unused */
#define SNDDATAI_COS_CNT_0 0x00000c80
#define SNDDATAI_COS_CNT_1 0x00000c84
#define SNDDATAI_COS_CNT_2 0x00000c88
#define RCVLPC_STATSCTRL_ENABLE 0x00000001
#define RCVLPC_STATSCTRL_FASTUPD 0x00000002
#define RCVLPC_STATS_ENABLE 0x00002018
+#define RCVLPC_STATSENAB_DACK_FIX 0x00040000
#define RCVLPC_STATSENAB_LNGBRST_RFIX 0x00400000
#define RCVLPC_STATS_INCMASK 0x0000201c
/* 0x2020 --> 0x2100 unused */
#define BUFMGR_MB_MACRX_LOW_WATER 0x00004414
#define DEFAULT_MB_MACRX_LOW_WATER 0x00000020
#define DEFAULT_MB_MACRX_LOW_WATER_5705 0x00000010
+#define DEFAULT_MB_MACRX_LOW_WATER_5906 0x00000004
#define DEFAULT_MB_MACRX_LOW_WATER_JUMBO 0x00000098
#define DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780 0x0000004b
#define BUFMGR_MB_HIGH_WATER 0x00004418
#define DEFAULT_MB_HIGH_WATER 0x00000060
#define DEFAULT_MB_HIGH_WATER_5705 0x00000060
+#define DEFAULT_MB_HIGH_WATER_5906 0x00000010
#define DEFAULT_MB_HIGH_WATER_JUMBO 0x0000017c
#define DEFAULT_MB_HIGH_WATER_JUMBO_5780 0x00000096
#define BUFMGR_RX_MB_ALLOC_REQ 0x0000441c
#define TX_CPU_STATE 0x00005404
#define TX_CPU_PGMCTR 0x0000541c
+#define VCPU_STATUS 0x00005100
+#define VCPU_STATUS_INIT_DONE 0x04000000
+#define VCPU_STATUS_DRV_RESET 0x08000000
+
/* Mailboxes */
+#define GRCMBOX_BASE 0x00005600
#define GRCMBOX_INTERRUPT_0 0x00005800 /* 64-bit */
#define GRCMBOX_INTERRUPT_1 0x00005808 /* 64-bit */
#define GRCMBOX_INTERRUPT_2 0x00005810 /* 64-bit */
#define GRC_MISC_CFG_BOARD_ID_5788 0x00010000
#define GRC_MISC_CFG_BOARD_ID_5788M 0x00018000
#define GRC_MISC_CFG_BOARD_ID_AC91002A1 0x00018000
+#define GRC_MISC_CFG_EPHY_IDDQ 0x00200000
#define GRC_MISC_CFG_KEEP_GPHY_POWER 0x04000000
#define GRC_LOCAL_CTRL 0x00006808
#define GRC_LCLCTRL_INT_ACTIVE 0x00000001
#define GRC_EEPROM_CTRL 0x00006840
#define GRC_MDI_CTRL 0x00006844
#define GRC_SEEPROM_DELAY 0x00006848
-/* 0x684c --> 0x6c00 unused */
+/* 0x684c --> 0x6890 unused */
+#define GRC_VCPU_EXT_CTRL 0x00006890
+#define GRC_VCPU_EXT_CTRL_HALT_CPU 0x00400000
+#define GRC_VCPU_EXT_CTRL_DISABLE_WOL 0x20000000
#define GRC_FASTBOOT_PC 0x00006894 /* 5752, 5755, 5787 */
/* 0x6c00 --> 0x7000 unused */
#define NVRAM_WRITE1 0x00007028
/* 0x702c --> 0x7400 unused */
-/* 0x7400 --> 0x8000 unused */
+/* 0x7400 --> 0x7c00 unused */
+#define PCIE_TRANSACTION_CFG 0x00007c04
+#define PCIE_TRANS_CFG_1SHOT_MSI 0x20000000
+#define PCIE_TRANS_CFG_LOM 0x00000020
+
#define TG3_EEPROM_MAGIC 0x669955aa
+#define TG3_EEPROM_MAGIC_FW 0xa5000000
+#define TG3_EEPROM_MAGIC_FW_MSK 0xff000000
+#define TG3_EEPROM_MAGIC_HW 0xabcd
+#define TG3_EEPROM_MAGIC_HW_MSK 0xffff
/* 32K Window into NIC internal memory */
#define NIC_SRAM_WIN_BASE 0x00008000
#define FWCMD_NICDRV_FIX_DMAR 0x00000005
#define FWCMD_NICDRV_FIX_DMAW 0x00000006
#define FWCMD_NICDRV_ALIVE2 0x0000000d
+#define FWCMD_NICDRV_ALIVE3 0x0000000e
#define NIC_SRAM_FW_CMD_LEN_MBOX 0x00000b7c
#define NIC_SRAM_FW_CMD_DATA_MBOX 0x00000b80
#define NIC_SRAM_FW_ASF_STATUS_MBOX 0x00000c00
#define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */
#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
+#define MII_TG3_EPHY_PTEST 0x17 /* 5906 PHY register */
#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */
#define MII_TG3_AUX_STAT_100FULL 0x0500
#define MII_TG3_AUX_STAT_1000HALF 0x0600
#define MII_TG3_AUX_STAT_1000FULL 0x0700
+#define MII_TG3_AUX_STAT_100 0x0008
+#define MII_TG3_AUX_STAT_FULL 0x0001
#define MII_TG3_ISTAT 0x1a /* IRQ status register */
#define MII_TG3_IMASK 0x1b /* IRQ mask register */
#define MII_TG3_INT_DUPLEXCHG 0x0008
#define MII_TG3_INT_ANEG_PAGE_RX 0x0400
+#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
+#define MII_TG3_EPHY_SHADOW_EN 0x80
+
+#define MII_TG3_TEST1 0x1e
+#define MII_TG3_TEST1_TRIM_EN 0x0010
+
/* There are two ways to manage the TX descriptors on the tigon3.
* Either the descriptors are in host DMA'able memory, or they
* exist only in the cards on-chip SRAM. All 16 send bds are under
/* SMP locking strategy:
*
- * lock: Held during all operations except TX packet
- * processing.
+ * lock: Held during reset, PHY access, timer, and when
+ * updating tg3_flags and tg3_flags2.
*
- * tx_lock: Held during tg3_start_xmit and tg3_tx
+ * netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds
+ * netif_tx_lock when it needs to call
+ * netif_wake_queue.
*
* Both of these locks are to be held with BH safety.
+ *
+ * Because the IRQ handler, tg3_poll, and tg3_start_xmit
+ * are running lockless, it is necessary to completely
+ * quiesce the chip with tg3_netif_stop and tg3_full_lock
+ * before reconfiguring the device.
+ *
+ * indirect_lock: Held when accessing registers indirectly
+ * with IRQ disabling.
*/
spinlock_t lock;
spinlock_t indirect_lock;
u32 tx_cons;
u32 tx_pending;
- spinlock_t tx_lock;
-
struct tg3_tx_buffer_desc *tx_ring;
struct tx_ring_info *tx_buffers;
dma_addr_t tx_desc_mapping;
struct tg3_rx_buffer_desc *rx_std;
struct ring_info *rx_std_buffers;
dma_addr_t rx_std_mapping;
+ u32 rx_std_max_post;
struct tg3_rx_buffer_desc *rx_jumbo;
struct ring_info *rx_jumbo_buffers;
#define TG3_FLAG_ENABLE_ASF 0x00000020
#define TG3_FLAG_5701_REG_WRITE_BUG 0x00000040
#define TG3_FLAG_POLL_SERDES 0x00000080
-#if defined(CONFIG_X86)
#define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100
-#else
-#define TG3_FLAG_MBOX_WRITE_REORDER 0 /* disables code too */
-#endif
#define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200
#define TG3_FLAG_WOL_SPEED_100MB 0x00000400
#define TG3_FLAG_WOL_ENABLE 0x00000800
#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
#define TG3_FLAG_PCI_32BIT 0x00080000
#define TG3_FLAG_SRAM_USE_CONFIG 0x00100000
+#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000
#define TG3_FLAG_SERDES_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_INIT_COMPLETE 0x80000000
u32 tg3_flags2;
#define TG3_FLG2_RESTART_TIMER 0x00000001
-/* 0x00000002 available */
+#define TG3_FLG2_HW_TSO_1_BUG 0x00000002
#define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004
#define TG3_FLG2_IS_5788 0x00000008
#define TG3_FLG2_MAX_RXPEND_64 0x00000010
#define TG3_FLG2_PCI_EXPRESS 0x00000200
#define TG3_FLG2_ASF_NEW_HANDSHAKE 0x00000400
#define TG3_FLG2_HW_AUTONEG 0x00000800
-#define TG3_FLG2_PHY_JUST_INITTED 0x00001000
+#define TG3_FLG2_IS_NIC 0x00001000
#define TG3_FLG2_PHY_SERDES 0x00002000
#define TG3_FLG2_CAPACITIVE_COUPLING 0x00004000
#define TG3_FLG2_FLASH 0x00008000
#define TG3_FLG2_1SHOT_MSI 0x10000000
#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
+#define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
u16 asf_counter;
u16 asf_multiplier;
+ /* 1 second counter for transient serdes link events */
+ u32 serdes_counter;
+#define SERDES_AN_TIMEOUT_5704S 2
+#define SERDES_PARALLEL_DET_TIMEOUT 1
+#define SERDES_AN_TIMEOUT_5714S 1
+
struct tg3_link_config link_config;
struct tg3_bufmgr_config bufmgr_config;
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM5755 0xbc050cc0
#define PHY_ID_BCM5787 0xbc050ce0
+#define PHY_ID_BCM5756 0xbc050ed0
+#define PHY_ID_BCM5906 0xdc00ac40
#define PHY_ID_BCM8002 0x60010140
#define PHY_ID_INVALID 0xffffffff
#define PHY_ID_REV_MASK 0x0000000f
(X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \
(X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
(X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
- (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM8002)
+ (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
+ (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002)
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
git://git.onelab.eu / linux-2.6.git / blobdiff